That was great! You did an excellent job of filming and explaining all the important aspects of your Technique and the trees look fantastic! Thanks!

@SouthernAlbertaRail

Ай бұрын

Thank you very much!

Dear me mate the best tree making video i have seen and will defiantly be following your video on this and your other ones too well done great stuff .UK. Thank you.

@SouthernAlbertaRail

24 күн бұрын

Thanks so much, glad the video helped out. Cheers! -grant

Always nice to see a master teaching his craft to the world! Fantastic job as always Grant.

@SouthernAlbertaRail

2 жыл бұрын

Thank you so much, Cheers!

I just want to say I've watched 50+ videos about trees on KZread and I have to admit, you have the simplest, most effective, easy, best looking trees man. You now have a new subscriber and fan ❤

@SouthernAlbertaRail

2 ай бұрын

Wow, thanks!

I have watched your tree making videos several times and gave it a go myself over the past few days (I made 21 4" trees). I have found difficulty getting the initial flocking to stick to the armatures. I used a "Rustoleum 2X Ultracover Paint + Primer (Dark Walnut)" which I now note says 'Fast Drying' on the can. Perhaps my spray paint is drying too quickly and is no longer tacky when I sift the first application of Earth Blend / Static Grass Flock? I would be interested to hear what others are using and their results. I resorted to using more of the spray adhesive and that seems to help improve "leaf coverage" sticking to the branches somewhat. Excellent vide by the way: amazing results, explained and demonstrated in a very reproducable way. Thank You!!

@SouthernAlbertaRail

Күн бұрын

Thanks so much. I use Tremclad as it has a relatively long drying time and stays tacky enough that you get a good bond of the initial material. You still have to work somewhat quickly but I find it does the trick. Thanks for stopping by and having a look. -grant

best way and fastest, i've seen yet, made 2 after watching in a hurry and still turned out usable and awesome...

@SouthernAlbertaRail

2 ай бұрын

Good to hear! The more you make the better they'll look. Cheers. -grant

Thank for sharing. Great idea.

@SouthernAlbertaRail

2 жыл бұрын

My pleasure. Thanks for watching!

That's a good way to do it. Bob

@SouthernAlbertaRail

2 жыл бұрын

Thanks Bob. Cheers. -grant

I’ve done single trees like this but have been putting off doing more because of how long I thought it would take. You make it look so fast and easy! Thanks for sharing!

@SouthernAlbertaRail

Жыл бұрын

Glad you found it helpful Ralph. Cheers. -grant

Thanks for the tutorial, the trees came out really nice and they look realistic too.

@SouthernAlbertaRail

2 жыл бұрын

Sweet, Glad you gave it a whirl Derek. Cheers! -grant

No tree's were harmed in the making of this video ! Seriously though another great tutorial thank you sir, and yes definitely let them sit overnight and I seal mine with a light coat of matte varnish. I also wear a mask when using static grass or flock as I find it can get airborne quite easily and a nice still day with little wind produces the best result. Thanks.

@SouthernAlbertaRail

2 жыл бұрын

Thanks. Good point about the static fibre. It can certainly float around. Cheers. -grant

That’s awesome. It’s great that we had some good weather to do this outside.

@SouthernAlbertaRail

2 жыл бұрын

You got that right! Make trees while the sun shines!

Brilliant work my friend season greetings from the UK Happy modelling ,be safe, be careful be lucky

@SouthernAlbertaRail

9 ай бұрын

Thanks, all the best! -grant

Very well done,greetings from Slovakia

@SouthernAlbertaRail

9 ай бұрын

Thank you very much!

Great tutorial!

@SouthernAlbertaRail

2 жыл бұрын

Thank you! Cheers!

Wow, your trees look fantastic. I think I'll give your method a try. Your method makes the most realistic pine (fir) frees I've yet seen. Thanks for the video. Cheers & 73 from W Rusty Lane K9POW in eastern Tennessee

@SouthernAlbertaRail

Жыл бұрын

Thanks, have fun! -grant

Wow watching this is making me Really want some Trees 🌳 bling up my Railroad..

@SouthernAlbertaRail

2 жыл бұрын

Piles of fun to make. Hope you give these a whirl.

More great stuff. Can’t wait to see how this translates to HO… Thanks for another great video!

@SouthernAlbertaRail

6 ай бұрын

Thanks! Glad you found it useful. Cheers. -grant

BRILLIANT!!!!!!!!!!!!

@SouthernAlbertaRail

2 жыл бұрын

Thanks!! Glad you enjoyed.

Wow looks fantastic. Thanks for sharing. Dave

@SouthernAlbertaRail

2 жыл бұрын

Thanks for watching Dave. Cheers. -grant

WOW!!! those trees look amazing!

@SouthernAlbertaRail

5 ай бұрын

Thanks!

Good work. Thanks

@SouthernAlbertaRail

2 жыл бұрын

Thanks very much. Cheers.

Great video, thanks

@SouthernAlbertaRail

2 жыл бұрын

Glad you liked it Allen! Cheers.

Great tutorial! Thank you 🙂

@SouthernAlbertaRail

2 жыл бұрын

You’re welcome, glad it was helpful. Cheers.

👍

Slowly sifting through your videos. Wow! Pro quality videos and truly remarkable results! And your thought process for the assembly line! You must be a heck of a productive person in the business or working world! Thank you as always for sharing! Dominic

@SouthernAlbertaRail

Жыл бұрын

Glad you like them! I spent 25 years in the trucking industry.... You soon realize the more efficient you are the more money you make!! Cheers. -grant

@dominicleone6795

Жыл бұрын

@@SouthernAlbertaRail 38 years in the family scrap business managing the non ferrous end along with an uncle who demanded 120 percent every day taught me a few tricks along the way! Retired now, i just love seeing talent and how things are done. Whether it be in model railroading, modeling, airbrush painting, sports, folks working, whatever. Yourself, Boomer, Luke T, a few others along with the old timers from before the youtube era in this hobby have an excellent eye of the world and how to recreate it in miniature. You had my sub after seeing you hit the wheels from different angles to create the shadows and highlights! Nice to see you're family involved as well. Happy Holidays to you and yours! Dominic

@SouthernAlbertaRail

Жыл бұрын

It usually takes someone pushing us to the limit to learn how to problem solve and realize what we can actually accomplish. Your uncle seems to be who pushed you, my Dad did it for me. Critical thinkers.... Always looking for the best approach to solve a problem. Thanks so much for all your comments and feedback and all the best to you and family for Christmas and the New Year. -grant

Great work.

@SouthernAlbertaRail

7 ай бұрын

Thank you! Cheers!

One of the best methods I've seen, thanks for sharing. I feel like this will take some practice, but I have a few such trees in my future! Iain

@SouthernAlbertaRail

Жыл бұрын

With your modelling choice you will indeed need a tree or two Iain. Good luck with it and have a blast! Cheers! -grant

Great technique, again! Thanks for sharing!

@SouthernAlbertaRail

2 жыл бұрын

Thank you! Cheers!

WOW! those look great, thx for the updated video

@SouthernAlbertaRail

2 жыл бұрын

My pleasure David, glad you like them. Cheers!

Excellent!

@SouthernAlbertaRail

8 ай бұрын

Thank you! Cheers!

Thanks Grant. That's a really useful and well described video..

@SouthernAlbertaRail

2 жыл бұрын

Glad it was helpful Scott. Cheers. -grant

Awesome video👍🏽 I’m going to use this. Thx for sharing 👊🏽

@SouthernAlbertaRail

5 ай бұрын

Thanks, have fun!

Fantastic tutorial. Any suggestions on wire and twine fiber length for modeling at 1/56th scale or roughly O for a railroader?

@SouthernAlbertaRail

2 ай бұрын

In all honesty I'm not sure the Sisal would be stiff enough for a tree in that scale. You could give it a whirl but there may be a better way to build a 1/56 scale version. Check out Boomer Dioramas KZread channel for some amazing tree tutorials. Cheers! -grant www.youtube.com/@boomerdiorama

I tried your method and after a few oddly shaped blobs that looked like alien Star Trek plants, I think I've got it and turned out 10 trees this morning. I only have a small layout due to space limitations, but I can fill it up with trees easily now. Finding sisal baling twine in less than 10,000-foot rolls was a challenge, but I did find an 1,800-foot roll for only $20. Thanks for the great instructions! Aspen trees are next, you made those look easy, too.

@SouthernAlbertaRail

Жыл бұрын

Sweet! Glad you found the groove. The first tress can be a bit disappointing but you just have to "boldly go" where you haven't been before... Sorry couldn't resist... -grant

@apf20

Жыл бұрын

@@SouthernAlbertaRail Ha! Love it. Thanks, Roger from Illinois.

Take a look at my n scale mountain scenery vids, I’m going to be seeing this process in my future, thank you for the video.

@SouthernAlbertaRail

2 жыл бұрын

I think you'll enjoy making them. It's actually a lot of fun and pretty relaxing. Cheers.

The sequel to Kill Dozer. Anger Plow...

@SouthernAlbertaRail

2 жыл бұрын

Jordan Shredder.........

Very good technique Grant, thank you for sharing. I am modelling the BN in Oregon, so lots of fir trees will be needed

@SouthernAlbertaRail

Жыл бұрын

Glad it was helpful. Yes you will need a pile of trees for Oregon. What area are you modelling?

@jhoodfysh

Жыл бұрын

@@SouthernAlbertaRail It will be freelance in Oregon's Mid Willamette Valley where I live. The name is (BN Willamette Valley Division BNWV). I am modelling in the mid 70's as if BN is the predominant railroad in the area with some UP and lease units. Small trains, small yards, and long runs through the scenes on two levels. I am starting over. early last year I took down a "spaghetti" layout that did not have great operations. The total area is 23 x 18 with some obstructions.

@SouthernAlbertaRail

Жыл бұрын

Sounds like a good sized area to model some wide open space. And who can't love early BN and their melting pot of paint schemes! Have fun. -grant

Nice video and very nice trees

@SouthernAlbertaRail

2 жыл бұрын

Thank you very much!

Your trees are so simple yet so complex at the same time. The end result is great. Do you have an updated number on how many trees you've got on the layout so far? 👍

@SouthernAlbertaRail

2 жыл бұрын

Thanks a bunch. I've built 3800 trees in the last 20 months or so. All but 700 have been planted, acting as reserves for the next scenic work to be done. There is another 1500 older models that will be replaced as time allows. Happy that less trees are required as I head further east across the layout!! Cheers. -grant

NEW subscribe wow amazing layout thx for sharing.

@SouthernAlbertaRail

2 жыл бұрын

Welcome aboard and thanks for subbing up! You should find a pile of stuff on the channel to check out. Cheers! -grant

@cncpgreatlakesdiv4896

2 жыл бұрын

@@SouthernAlbertaRail thx you very much

I’m curious how well this would work with a fir tree from deeper into the woods where their lower branches die off from growing so tight together. The thought here being to follow this process and then trim off random lower growth after those last layers of flocking are applied.

@SouthernAlbertaRail

2 жыл бұрын

You could adjust how much Sisal was on the lower portion before spinning Chris. I've done that before and it works just fine. If you wanted to create a more detailed trunk you could apply wax as done in the Birch tree vid. -grant

This seems to be the best technique but I'm building a coffee table and bought some trees. They aren't as realistic but I didn't want to spend spend much time on trees, it's cold so no painting.

@SouthernAlbertaRail

7 ай бұрын

Roger that. Not a cold weather build unless you have a shop with good ventilation. Cheers!

I tried making my first OO / HO fir tree last night. The process was relatively simple but I think my wire was too thick (2mm). Do you have any recommendation for OO wire thickness? I also used a small ball of 'sisal twine' which worked but had a very aggressive twist to it. Off to order a roll of baler sisal now which seems to be thicker strands and less twisted. Planning a tree making production line over the Christmas holidays - family entertainment!

@SouthernAlbertaRail

Жыл бұрын

Good use of the Christmas holiday!! 2 mil is pretty thick for sure. I would try 16 gauge copper. If memory serves 16 gauge is about 1.3 mil.

@UpTheWHL

Жыл бұрын

@@SouthernAlbertaRail I can get my hands on 1.25mm copper wire easily enough. Thanks Grant

Love the trees and layout. Could I ask what the typical depth and height of your scenic sections are?

@SouthernAlbertaRail

2 жыл бұрын

Thanks! Typical depth of scenes is usually around 10 inches to a foot. There are a few exceptions of course. Height varies as this is a double deck layout. The upper level track height averages about 62 inches off the floor.

@UpTheWHL

2 жыл бұрын

@@SouthernAlbertaRail … and what’s the typical height between scenic sections, rail top to rail top? Can’t stop watching these! Thanks!

@SouthernAlbertaRail

2 жыл бұрын

@@UpTheWHL About 20 inches railtop to railtop between upper and lower levels. The height from bottom level railtop to bottom of upper fascia is approximately 13 inches.

Hi, really like your trees and would like to know if you are working in N Scale aren't your trees a little large. I am just curious as I work in O Scale and your 7" trees work out to be about 93' and your branches would be 13' with using 2" sisal. Am I correct with these measurements. Just asking as I am new at making trees and would like to make them a proper size for O scale. I am Pastor Randy Bourque retired and live in Calgary, I am in the process of builiding a 1940's 50's sawmill logging camp town, no trains just trucks. I grew up around sawmills in Prince George, Vanderhoof, Fort St. James BC. My goal is to build several trees from 6 to 12" in O scale and was thinking of converting your N scale to O scale that is why the question. Hope to hear from you.

@SouthernAlbertaRail

9 ай бұрын

Your math is sound but by the time the twisting is taken into account and the trimming takes place the tallest tree I have is around 5 inches and the branches are 3/4 inch at most. Of course the size is dependant on location. The trees on the BC side of my layout are much taller than the Alberta trees. Cheers. -grant

Just out of curiosity... the baler's twine... is it nylon, polymer, hemp, jute, and about what thickness is it? I don't have an agriculture store near me, so I'm attempting to sort out an alternative. Thanks :)

@SouthernAlbertaRail

2 жыл бұрын

Sisal is actually a natural material so it is just Sisal. The stuff I have is about 1/8th in diameter.

@CoensScaleModelling

2 жыл бұрын

@@SouthernAlbertaRail Thanks. I'll see what I can find.

I have really enjoyed and learned a lot from your videos, and I have modelled for years. Regarding making the conifer trees, the sisal from local stores is not rigid enough to hold the shape of the tree. The sisal from hay baling twine that you refer to is more rigid. I found that it is available at UFA stores in Alberta but not where I live, in southern Sask. Seems everyone here prefers poly twine. Also to purchase sisal twine from UFA or other suppliers on-line, I need to buy it in either 9000 ft or 16000 ft packs. I really only need about 300 ft. Do you know any way I can get some smaller quantities of that sisal twine?

@SouthernAlbertaRail

2 жыл бұрын

HI Allan Glad you're enjoying the channel and finding some interesting content. The rigidity of the bailing Sisal is definitely what you want but unfortunately I don't know if it is available in smaller quantities.

@allanhoward6633

2 жыл бұрын

@@SouthernAlbertaRail Thank you Grant. Based on inquiries I have made so far, I think I may be stuck with the choice of getting so much twine that hopefully I can share it with other modelers or else going back to using furnace filter material to make conifers. I definitely think your technique is superior. I'm looking forward to seeing more of your videos as they become available.

18 guage copper wire, is it 1,2mm thick? Seems thinner and more flexible than 1,2 mm wire. Can you confirm?

@SouthernAlbertaRail

24 күн бұрын

You can use any gauge you want. I've used 24 gauge wire to build wee tiny trees. Definitely tests the patience though with that size wire. Cheers..

@canuckster24

23 күн бұрын

@@SouthernAlbertaRail I've started making my own following your instructions, they look really good!

@SouthernAlbertaRail

17 күн бұрын

Glad o hear that. Have fun!

Just found your channel and this tutorial on fir trees. I’m a OO/HO modeller who needs heaps of trees for a mountain/mining scene and I was wondering if you have any experience or advice using your technique for making larger trees?

@SouthernAlbertaRail

2 жыл бұрын

This method is easily adapted to HO by simply using a larger gauge wire, cutting the Sisal longer and using longer static grass in the flock. Depending on how big the tress need to be I would suggest a stiffer material in place of the Sisal to minimize any drooping in the branches. Bark detail could also be applied using the methods I cover in my Birch Tree vid. Hope this helps. -grant

Hello, I have tried several types of sisal rope, but the fibers don't seem as strong as the ones you use. What is the thickness of the sisal rope you use? Thanks.

@SouthernAlbertaRail

2 ай бұрын

I’m out of town on a job Fred so can’t measure it up. It is farm grade Sisal designed for baling if that helps. I would guess that the rope itself is a good 1/8” thick. I can give you a proper measurement in a week or so when I get home. Cheers. -grant

One of the greatest Layouts i have ever Seen. Do you have a link to the materials you use? Don‘t know how they called und germany

@SouthernAlbertaRail

2 жыл бұрын

I don't have links unfortunately. Purchased long before online shopping was a thing. Look for Hay or Straw Bale tying Sisal at a farm supply store and the copper wire should be available from an electrical store.

@mymodelrailroadlayout

2 жыл бұрын

@@SouthernAlbertaRail thanks 😁 I will look for it

My sisal isn’t coming apart as easily as yours.

@SouthernAlbertaRail

7 ай бұрын

Interesting. I wonder if it's not as dry?

Do you sell them ? 😅ship to New Zealand 🇳🇿 😅

@SouthernAlbertaRail

9 ай бұрын

I used to sell them way back when....

@user-bg9sg8cm3s

9 ай бұрын

@@SouthernAlbertaRail they look great

Verry good trees !! 🚉🐕🐕🐕👍😎 HC Treintje Herman from Belgium. 🚉🐕🐕🐕👍😎

@SouthernAlbertaRail

2 жыл бұрын

Thanks! Cheers.