Building a Biggest Turbofan Engine Model Kit that you can Build! | Speed Build
DM119 Turbofan Engine Kits: bit.ly/3RbAh8L
More Jet Engine Kits: www.stirlingkit.com/?ref=cnN4...
Stirlingkit Black Friday: bit.ly/3RkM2Kd
Extra 12% off promo code: BH
Follow me on:
Instagram: kennethclark_yt
/ kennethclark_yt
Tiktok: bhobbyofficial.
/ bhobbyofficial
0:00 Intro
0:10 Unboxing
1:06 Build Starts Here
1:14 Fan Blade Installation
1:35 Turbine Rotors
2:45 High Pressure Compressor
3:00 Low Pressure Turbine
3:30 Combusion Chamber
3:40 Casing
4:24 Assembly
5:06 Start Motor
5:34 Base
6:02 Final Assembly
6:40 Montage
Engine building tools:
Rc Shock Pliers: amzn.to/3EKMdHP
Nieko Torch: amzn.to/49Wji1m
Electric Screw Driver: amzn.to/3Z5lOwp (after months of use, I don't recommend it)
Tactical knife: amzn.to/3UR1uNO
Wera Ratchet: amzn.to/3Gj5h04
Pliers: amzn.to/3rjdl9W
Ratchet (Cheaper version): amzn.to/3fsoHWg
Screw Driver set: amzn.to/3uv6A9D
Lube Oil: amzn.to/3xZPM9G
Disclaimer: As an Amazon Associate some of the links above are affiliate links, which means I earn a small commission if you make a purchase at no additional cost to you.
Thank you!
#stirlingkit #bhobby #asmr #turbofan
Пікірлер: 159
Balancing all the components so it doesn't vibrate would be a nice way to step it up to the next level
@davidrestis9931
6 ай бұрын
What does that mean?
@Vipcioo
6 ай бұрын
This means that from the red rotor to the right to the outlet, all rotors are swinging while rotating (6:41). Moreover, the third rotor from the left is also swinging. The sound you hear when starting is the rolling resistance caused by crooked rotors. Honestly, I expected greater accuracy, looking at the very precise, clean workmanship and aesthetic whole. Unless the problem is in the editing (e.g. 4:22).
This is by far the best museum quality jet engine model that you can actually get at home. Unfortunately I’ve recently seen some scam Facebook and Instagram ads that have stolen your video footage and used its content to promote a fake ad selling this model at ridiculously low prices ($27.99)
@thabg007
5 ай бұрын
I saw that fake ad also, I currently have a plastic 1, and its no where near as detailed as this 1
@BHobby
5 ай бұрын
Thanks for the heads up!
amazing model! I wasn't expecting it to have the accessories box
Very beautiful!!!!
I don’t see how Santa could deliver on this for Christmas, unless the parent’s are pilots, dentists, or lawyers... I don’t see how even an Airmen in the world’s greatest Air Force could rationalize a $1,000 novelty purchase, and they build them all day 😂. But I’m appreciating the sheer number of moving parts, detail, material… 🎉❤ I may have to appreciate this turbo fan on KZread only.
@GenXPertChannel
6 ай бұрын
Most large, complex models cost quite a bit. Take a look ot Pocher, DeAgonstini, Agora, etc...
When i saw you uploaded this i was so hyped because this is also 1 of my dream kits! And guess what... I also have that screwdriver set!! Keep on doing your thing😊❤
@BHobby
8 ай бұрын
Cool! Hope you like it! Have fun building!😁
@NigelSheldon
8 ай бұрын
@@BHobbyI too liked your video and the screwdriver and tools set. If you can, would you please sharing the link to those tool sets? They look great!
@BHobby
8 ай бұрын
@@NigelSheldon thanks for reminding me 😁
@NigelSheldon
8 ай бұрын
@@BHobby Thanks for posting that! I ordered them. Again, cool content, cool build and I appreciate your efforts.
I was hoping someone would make a video about this one, awesome 👍
@BHobby
8 ай бұрын
Thank You! 😀
you do the right choice! I like engines!!
@BHobby
8 ай бұрын
Thank You! 😀
I think i know what i want for Christmas this year
Needs an LED super bright hidden light string after burner. lol
Always KEREEEEEN ❤
One of your most satisfying vids. Also, this thing is huge!
@BHobby
8 ай бұрын
Glad you like it! 😁
Wish we could make turbofans that work that are this size. It would revolutionize personal aircraft
@scottgahum9806
6 ай бұрын
It wouldn't work because it's sol and requires alota thrust and fuel so impossible
@scottgahum9806
6 ай бұрын
And also humans are too heavy to carry😊
@nickl5658
6 ай бұрын
Add another $900-$1000 and you can get a functional turbojet engine that is about the same size. XICOY X45 micro turbojet is an example. But the small the engine the less fuel efficient it becomes.
@scottgahum9806
6 ай бұрын
@@nickl5658 agreed mate
@scottgahum9806
6 ай бұрын
But somewhere in the future will be possible
This turbo fan looks and sounds amazing!
Loved that cool sound rhythm effect you did, it indicates how much effort you put into this video ...... btw the build is great too.
@the-je6zn
8 ай бұрын
i know right
@Guywholikesplanes936
6 ай бұрын
Sounds like peppa pig ngl
@BHobby
6 ай бұрын
Thank You! 😀
That’s the most advanced piece of work I’ve ever seen
That was just so therapeutic to watch , I totally loss all time watching that 👌👌👌👌
Great Edit!!
@BHobby
6 ай бұрын
Thanks!
nice job bro
It will be impossible to this guy be hated
HAPPY THANKSGIVING 🦃🦃🦃🦃🦃🦃🦃🦃🦃🦃🦃🦃🦃🦃
Really well done video.
@BHobby
6 ай бұрын
Thank you very much!
I wonder if it could actually run if the parts were made of steel and with a few modifications.
So cool mate👍
@chibiitachi7828
8 ай бұрын
Eh eh ade plak org jdt kat sini!
Woww fantastica! 🤗❤️
@BHobby
8 ай бұрын
Thank you! ❤
@XelgorBlast2
8 ай бұрын
@@BHobby ❤️
Nice
Где любители турбореактивной тяги ?)
Huge fan B hobby 👍
@BHobby
6 ай бұрын
😁👊
INSANE
Must be very expensive to get this type of thing
@R6Siege_Addict
8 ай бұрын
It’s 1000$ dollars 💀
@user-ki1ji7hb6r
7 ай бұрын
@@R6Siege_AddictwHAT
@user-ki1ji7hb6r
7 ай бұрын
💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀
@xenno8496
7 ай бұрын
@EggyBoi3000 what!? For the fact it's a WORKING model...THAT SEEMS "CHEAP" I expected this thing to cost like half a mil or some shit
@belindappitman1974
7 ай бұрын
Is not much
If it works, you could try to put a full casing around it.
Great video presentation and I love the cadence.
@BHobby
6 ай бұрын
Thanks so much!
When building, be sure that the turbine turns very easily at each stage of the build, even the slightest little bind, may prevent it from turning
It would have been nice if it wasn't just a model but something that could actually work using propane or gasoline as fuel
I actually build and deconstructed these of real planes in real life and its hella hard but also very fun
are there special screws that you need a specific driver bit for or are they just regular phillips head screws? if they are the special screws does it come with a tool for them?
I like it it’s very good
Eyes: Looks quite easy. Brain and bank: No it’s not.. I’m dying
Me when my alarm rings: 💤💤😴 Me when B Hobby uploads early: 📱
Very cool video b hobby
@BHobby
8 ай бұрын
Thank you! I hope you like it!
lol I have the same cheapo precision screw driver set
What are the two tie rods used for? If it’s used to actuate inlet guide vanes then wouldn’t one link be sufficient?
Nice Happy Friday to you and everyone. Wish you may arrange to do ASMR build the 1) Gundam -FM 1/100 Raider Gundam + Action Base 1 clear -FM 1/100 Forbidden Gundam + Action Base 4 Clear - FM 1/100 Calamity Gundam + Action Base 5 Clear 2) Lego Bionicle (set on 2016) No -71404 -71308 -71309 -71311 -71312 -71313 3) 1/72 hmm zoids - Konig Wolf - Command Wolf Repackage Ver - Command Wolf LC & AC Barad Ver - Blade Liger AB - Liger Zero Schneider Thank you 🙂🙂
@BHobby
8 ай бұрын
I will check my Zoid Collection 😁
Just 2 of these and some other parts and I’ve got myself a podracer
you can't say its a working turbofan if it does not actually ignite fuel to spin, that's just called a model Edit: I see you changed the title, I still enjoyed the video anyways
I like the rhythmic editing
Cool! Now make it work.
Hook a dremel up to that!!!! 😁
For $500 more, you can get a King Tech K55G4+ that is a real working model jet engine that runs on diesel, kerosine or jet A1 and produces 12 pounds of thrust. Just saying.
@GenXPertChannel
6 ай бұрын
But this one looks better sitting on a shelf... which is the purpose.
1k is insane. I like engine models, and wanted one. I cant afford that
Now please add the injection, the burning chamber and a closed housing.
the build is neat however step further slow start tick tick spark igniters have it run of a jar kerosene or camping fuel have small gauges things for hung start hot start. or air start with a hopper with locking hoses more authentic working. something they can work on things like swap out the nose cone for a turbo prop
@peterresetz1960
7 ай бұрын
This engine as a real engine is designed as a high bypass turbo fan. Simply attaching a conventional propeller up to the front of the engine by removal of the impeller would not work. Turbo prop engines are not true axial gas flow engines as is a high bypass turbo fan. You might want to actually spend time investigating the different types of gas turbine engines regarding aviation. What you said just makes you look uninformed.
Engineer asmr at its f*ckin finest 🫠🫠🫠🙂
Put it on a big rc plane😊
How did they produced metal casings?
you forgot to safety wire all your hardware, engines gunna fall apart
For $1000 I'd want those low pressure turbines to be smoother... sound like they're catching on something...
I hate to be negative but why is the rotation wobbly? And it has some sort of a balance issue that can be heard in the video when it's running. Is there no way to balance it or fix it somehow?
For $1000 it's quite pricey, but very nice looking.
From Legos to do hickeys to WTF IS THAT stuff
man i thought it was going to actualy work
This is awesome!!! What camera do you use?
@BHobby
8 ай бұрын
Thanks! it's Sony a7rv
It's incredible how fast I went from "Oh, this would be a cool Christmas gift" to "Jesus Christ, I will never be able to afford this" when I clicked the link for this
@sosochio4374
8 ай бұрын
It is a hobby, not a toy. But, this can be the Christmas gift that GE, P&W, CFM, or RR give to their airline customers.
@caposey
7 ай бұрын
$1k just for this model-
@Wsportys
6 ай бұрын
Yeah, that shock caused me some emotional damage. I’ve dreamt of having this all my life, discover it today and my heart rockets through roof. I landed on the website and gazed upon that price!? Im now digging my heart out of the earths outer crust.
Are those tools you used included?
like of you like this "engineering"KZreadr
Very cool build, and expensive 😅
@BHobby
8 ай бұрын
Thank You! 😀
"Works"!
Very nice but about $1,000 OUCH still great video 👍
@BHobby
8 ай бұрын
Thank You! 😀
I'd love to build one of these. But they must be very expensive. And gunpla eats up most of my cash flow
Appreciate it if you could tell me where to order this?
@BHobby
6 ай бұрын
Please check the link on description. Let me know if it’s not available. Thanks 😁
Must be $999.99 USD to get this thing (insert goofy laugh)
Can you put on an plane. Im an an very big fan
I wish they weren't so expensive
Where can I buy this engine model, how much and do you have a discount code ?
How’s the parts quality ? Plastic ?
@BHobby
6 ай бұрын
It’s metal
Teleurgesteld. Ik dacht dat hij echt kon lopen op benzine
Where to buy? Direct me where sir?
3 quid on Temu
It sounds like a song
👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏
Can I share part of this video on TikTok please 😊
@BHobby
6 ай бұрын
Sorry but I’m doing some work to take down some profiles on Tiktok who’s posting my videos and discrediting my work.
Scale?
It would be really cool if someone like Matthias Wandel could modify this model so that it really works.
How can i get this type of engine, i am from Bangladesh?
@BHobby
6 ай бұрын
Please check the link on description. Let me know if it’s not available. Thanks 😁
I want to have it, but a 1000$ could give me so much more
No HPT?😂
3rd!
Woww
soo evetytime you made somethig there is always a rythm, what's today's rythm name?
Are the instructions in English? It looked like they are only in Chinese but it went by so fast I could have missed it.
Bro it cost $999 ₱50k+ thats like 1 iphone 12/13/14
But that’s the plane engine
all metal no flames!!!!! not happy
Its doesn't "work". If it worked it would run on fuel and generate thrust like a small model turbojet used in RC aircraft
Please inject jet fuel
Pls
Oh, so this isn't actually a "real working" engine
Video turned 2 months
"works" lol
Something is off balance