Building 24V/10Ah Li-Ion battery pack
Ғылым және технология
Customer required:
- 24V
- 10Ah
- 10A cont. discharge current
- Separate charge and discharge port
We choosen:
- Sanyo GA cells
- Daly BMS 15A/8A Separate port with 70°C temperature protection
Пікірлер: 237
Excellent work and thank you for showing how to set up the BMS
Your handiwork has made a very beautiful battery pack.
This is just a seven cell, 24v battery, butt three wide, yeah? Off of the same bms. I was unaware you could do that. Excellent. I need some fat-assed batteries for the boy's electric scooter. Thank you random stranger!
Could you put a component list what was used and where to get ???
Eres muy limpio trabajando, sí señor 👍
Sir your all components name please mention in tutorials video & also battery soldering machine name mention many many thanks you.
That's not a battery. That's a work of art!
@mcells_batteries
2 жыл бұрын
Thanks man 👉
Excellent technique, very well done
Excellent job mate. Inspired
Amazing dexterity!
Good job - looks factory made . Impressive. That spot welder works great. I want to do same to drive my 24V garage door opener motor.
@jamesjohnson5700
9 ай бұрын
He made a 240watt battery pack cool
What kind of Spot Welder did you used to do that battery?
Super video merci Le décapant en burette la marque
My only suggestion will be to add the gasket insulator same you use on the side of the battery on the top and bottom or fiber glass insulators. Other than that looks amazing.
@mcells_batteries
Ай бұрын
Thanks for comment. Yep, today we use fishpaper for all sides, battery pack is wraped to shrinkable foil like in video but on sides we use insulator glue for waterproof efect.
Pls can you tell me the tools used to make the battery. Thank you
Nice build, very clean
I liked your cable management 😉
Why is it that after you finish assembling the battery there is no trial?
Nice neat work
sorry but can't you explain what those black battery holders and the various stickers you stuck are? And then there would also be that circuit board you plugged in later. Can you put the links where you found the various materials and tools you used to assemble the battery pack? Thank you
hi what bms was used for this having trouble finding one ?
Nicely done! I’ll follow this to make mine and thanks.
beautiful work dear
Hello, May I ask which cable cross-section? you used ? Thanks in advance.
Nice work! How did you make label or what kind of label printer did you use?
Where did you get the wire stripper?
Good job pero donde pudo conseguir todo lo que utilizó en este proyecto especial mente las baterías 🔋 y el bms
Very very nice pack and craftsmanship but the sound of your tools smashing the table was Killing me....
@mcells_batteries
2 жыл бұрын
Get lower volume :D
Excellent art of batteries! I'm newbie on this, may I get your recommended tools name & brand? Thank you.
Very professional work
Thank you for your video clip! :)
Thank you
Very professional !
Holla budy can you please tell us what kind of Spot Welder you were using in this project please?
Very nice video. The only thing that I can't figure these joints. And you can make mistake only once :)
Brother you made a nice video. There is no background music so i clearly vision and understand what you have done..
@mcells_batteries
3 жыл бұрын
Thanks 🙂
@yandrapuvenkatesh6732
3 жыл бұрын
Pls make a video about diy spot welder
@mcells_batteries
3 жыл бұрын
Next time :)
@ottoestrada6702
2 жыл бұрын
Where did you get the BMS
Hola muy buen video pero la duda que tengo es porque lo de los 2 terminales gracias
How much does it cost for a setup like this?
Nice job!
injineer you have done will we love you.
Will it matter if I get a 15amp bms for this battery pack?
Nice work👍👍👍🙂🤝🤝🤝
awsome work. what spot welder do you use to weld the battery strips together (5:33)?
@ericklein5097
Жыл бұрын
Sounds like a Sunko
Nice build, very clean, thumbs up! But 2 comments from my side: -At 5:10: Too dangerous in my opinion: While welding on the second side of the battery, there should be some tape for isolation on every cell you are not working on at that specific moment. If you missplace your strips left or right or one strip falls down on the pack while handling it or something like that you´ll get a short. Also if there is a metal strip or anything else conductive left getting under the pack. -Why are you using black for the positive discharge wire???
@mcells_batteries
3 жыл бұрын
Hi, thanks 🙂 1. - Yes, I realize it but I know what I'm doing. Therefore, I often check the location of the connectors. 2. - I ran out of red wires 😁😁
@theo2378
2 жыл бұрын
Ran out red wire lol
Can i build the same configuration (3x7) but having only 20 cells ?
Was kostet solch ein fertiger Akkupack?
Question for you... I need a 4.8v - rechargeable pack for my filter system on my welding helmet. Battery system on filter isn't giving the working time I need. Any idea if this is possible with as high as 10AH and compact enough that it can hang on a belt? Appreciate any help with this...
Di solito nn vanno saldati prima i paralleli?
How much would a battery like this cost to buy
24v 250w electric cycle range kya hogi battery se?
Pekna praca 👍
@mcells_batteries
3 жыл бұрын
Vďaka :)
What is the diameter of the hot shrink pvc?
Love your technic
I have created a 7s 15 p battery pack with bms, and tried to use it with apc ups.. It just trips when power goes.. When i use it with existing battery in parallel it works fine
@mcells_batteries
3 жыл бұрын
Hi, voltage is same? 7S has 29.4Vmax, try discharge battery to 24V and try use it in ups.
@carlosguzman4461
3 жыл бұрын
Check bms limits
Hey there! I just want to make sure, you designed the battery as it has different discharge and charge cables, right?
@mcells_batteries
2 жыл бұрын
Hi, yes.
@bars3402
2 жыл бұрын
@@mcells_batteries Alright, can I use the same port to charge and discharge? Would it cause any problem in the future? The BMS that I am going to use supports this feature.
@angelffalcon3134
2 жыл бұрын
@@bars3402 there is common port, and different port.. 2 different bms
Great video, that very first weld on your first spot didnt look like that first weld took, i only see one dimple on your closeup, rest look fine.
@mcells_batteries
Ай бұрын
Yes, sometimes is welding pressure little bit different and it make some changes but it has not effect for final work.
Thanks for sharing.
can you send me the schematic diagram of the connection of wire from the batteries to BMS and charger ? Im going to build a batter pack for my electric bike? please reply immediately thanks
very nice videoplease,where i find the nickel stip
Next time, build a rig for the soldering job. holding the T-Connectors is better as soldering them on the table - thats not a good solder job here. dont do this like shown here ^^
Great job. Worked systematically. They say if you cut the balance leads unevenly short and long, there will be difference in resistance and the cells will be charged unevenly. Is it valid?
@divikumar5475
Жыл бұрын
Its a small pack its ain't gonna get a potential difference between the balance leads
Good job..very beautiful..can you detail you materials use ang where you order..thank salute
nice work
Thank you 👍👍👍🍮
Hallo 12v 18 21 ah ungefähr wie viel kostet?
24v 250w e cycle kitne km chalega isse?
A physical barrier more than kapton tape would be preferred for the BMS/balance cables. Something like barley paper but this is a really minor thing to point out. The fact that you're using kapton paper is enough honestly, KZread is full of Indian kids using cells that look like they died 10 years ago and have been rusting away at the bottom of a river ever since, put together with zero capacity, IR testing, no balancing is done prior to assembly they don't even look at cell voltages and then they solder some random wire to the terminals and call it a day. Followed by 1200 comments saying "Genius boss you are great. I wish one day to build battery like you" Ehhh 20 seconds later the barley paper comes out! This is a quality build, just don't use the Smart Daly BMS's. The dumb ones are just fine though, good price and they work.
@mcells_batteries
10 ай бұрын
Hi, thanks for your comment :D This build was build 2 years ago, so today we use fishpaper for basic insulation between cells and balance wires. We learn from other and sure from our mistakes and aplicate it in next builds. Today we build our own busbars, our holders, 3D projects etc. but it was long way and i think that it will be much longer :)
@mcells_batteries
10 ай бұрын
Next year we will start produce more videos and you can see our progress.
Hi where your location please?
Hi Thanks for the video very helpful. My first attempt at making battery pack for EBike, only able to get 18650 2200MAH cells, will they be ok to use?
@mcells_batteries
3 жыл бұрын
I think yes, but what about specs of cells?
@swiftcarstatus9181
2 жыл бұрын
@@mcells_batteries how to calculate 2200mah cell 10 Ah ?
Really professional
3kw ziewnic inverter?
can you make a battery for dell Inspiron 9300 with max watt hours and 11.1v
Per ricaricare la batteria che ci vuole
Quanto mi costa fare una batteria così da 24 v ma fatta da te io penso di non essere in grado di farla
Ciao mi sono iscritto da poco lavori molto bene bravo! hai realizzato un pacco batteria per tassellatore Hilti 36v hai un video?
What is the name of battery cover tap
That lap solder joint will reflow under high loads and let go, in my experience. I encourage you to consider a linesman splice or similar mechanical joint under solder.
@celalkaratas7872
Жыл бұрын
Bataryanın eni boyu nedir boyle bir batarya 12 volt 9 amper aku kutusuna sıgdırmak istiyorum
Nice work bro.. i want to build 60v 24 ah battery pack for my electric bike. Can you please send me diagram.
What's was that you put middle of the batteries the black wire ?
@otenyop
Ай бұрын
Temp sensor
Nice Sir
Hi, can anyone tell me what is the white striped wtape tht was used to hold down the BMS called? Thanks in advance! Appreciate it.
@bobforte9343
Жыл бұрын
It’s a certain kind of packaging tape that has “strands” in it to give more rigidity. For the life of me I can’t remember the name.
Bataryanın eni boyu nedir boyle bir batarya 12 volt 9 amper aku kutusuna sıgdırmak istiyorum
Lokks amazing
good work
What is the total weight of the battery you made? And can we use them for radio controlled vehicles?
@mcells_batteries
2 жыл бұрын
Hi, weight of this pack was 1300g. Probably yes, but it depends on many parameters.
Hi! the video is superb. I would like to ask you why you use a 7s configuration instead of 6s? which do you recommend and why?
@mcells_batteries
Жыл бұрын
Hi, thanks :D 7s was better for customer device, has higher voltage, higher energy instead of 6s.
@m.barrios
Жыл бұрын
@@mcells_batteries thanks for the fast replay. If my device has a nominal voltage of 24V VDC, would a 7S configuration be suitable or 6S is more recommended?
@mcells_batteries
Жыл бұрын
@@m.barrios You need know maximum possible voltage, but if is 24VDC nominal voltage i think you can use 7s.
@m.barrios
Жыл бұрын
@@mcells_batteries thanks so much for you support! Continue the good work 😃
This is awesome! Anyone else getting OCD about the label alignment?
Brother Nice demonstration and excellent clean work. I just have one doubt.. why did you use a black wire for battery and charge positive ? and why a blue wire for battery negative ?
@mcells_batteries
2 жыл бұрын
That's when I ran out of wires :D
How much is this battery?🙂
lavoro profezionale
Está bien la armada pero tiene que poner un diagrama de posición 😅
Are those dark green insulating rings necessary?
@mcells_batteries
3 жыл бұрын
Hi, yes. These insulating rings are used to strip the cell and the connecting pad.
@johncope4977
3 жыл бұрын
I think the battery casing is metal.
@Hamid9e
3 жыл бұрын
No, even big company like bosch doesn't use it, because the cell already has one isolator ring. But extra is better.
Gostei muito
What would be a 7s to ?P for a 24v 22ah -/+ battery pack
@mcells_batteries
2 жыл бұрын
Hi, maybe 6 or 7P. When use 3500mAh cells with 6P it will be 21Ah. When use 3200mAh and 7P it will be something about 22Ah.
Silent movies are the best....
nice
👌 perfect
Mi puoi mandare il link del carica batterie grazie e anche bms
How's the temp.cut off with the red cells?
@mcells_batteries
2 жыл бұрын
Inside of pack is bimetal switch with cut off temp. 70°C. This protect pack from high temp.
Sir muje e bike ke liye 48 v 50 hr ki battery chahiye uski price kitni hogi Rajkot gujrat me chahiye