Build your own houseboat polyethylene pontoons and aluminium frame
Want to build your own houseboat? Polyethylene pontoons and aluminium frame.
10m x 3.8m Houseboat frame and floats (33 feet x 12.5 feet)
12 x 840 litre floats
2 x 440 litre nose cones
Frame weighs 400kg
Floats weigh 622kg
Total weight 1022kg
Load capacity as frame and floats 4500kg
Nose cone 440 litre capacity 100kg payload
1150mm Long
1110mm Wide
590mm Deep
35kg each
Float has 840 litre capacity 400kg payload
1440mm Long
1110mm Wide
590mm Deep
46kg each
Please subscribe to our KZread channel
Facebook link
/ marinedocksystems.com.au
Australian Pontoon Boats Public Group
/ 1509570982762168
New South Wales
45 Wellington St
Riverstone NSW 2765
Australia
02 9627 5577
Queensland
26 Corbould Rd
Coolum Beach Qld 4573
Australia
07 5324 1557
Пікірлер: 86
Thanks for this! Great vision and detailed info on pricing etc. Just what I was looking for!
Those are some very impressive statistics. Flotation, size, cost. All very impressive. I would imagine a good number of builders will be motivated to start drawings or look to adapt ideas from tiny house builds. Inspiring.
I haven't seen your product in person but just from the video they seem really robust and of exceptional quality. Congratulations. always great to see great products on the market
I like the poly floats
Awesome work and dimensions to this frame and floats! Great video guys.
@MarineDockSystems
11 ай бұрын
Thanks 🙏
Really nice video. Would love to see what a completed project looks like.
Beautiful
effing brilliant thanks
Amazing! Thank you for sharing this video. Incredible & ideal in my area. I may need a few. Greetings from Kambaramba villages & Nubia village, Papua New Guinea.
Very epic
The rear most pontoon section on each side should house a motor and a jet drive.
Very very nice looking pontoons.Thats nothing but quality.
@alexanderk.1838
20 күн бұрын
To bad they disabled 👎
CAN ONE SECTION BE USED AS WATER TANK AD ANOTHER USED AS SEPTIC TANK? ONE ON EACH SIDE FOR BALANCE? PLEASE REPLY!
Nice 👍
@MarineDockSystems
Жыл бұрын
Thanks
I am very interested in purchasing this product, but I am really concerned about the way to attach them, as each side of them is attached only by one screw, meaning that each one is connected by four screws. Is it possible to add four more, or to have additional cleats on the sides?
@MarineDockSystems
Жыл бұрын
They just have the bolt holes on the ends
Hi...looks great ! What is the current price including GST as at Nov 18, 2022 ?
@MarineDockSystems
Жыл бұрын
This one is about 30k please email Marine Dock System with your details www.marinedocksystems.com.au
Nice! Do you manufacture the floats? If so, are the HDPE? We recently built a barge/narrow boat from HDPE, such a versatile and easy to use material.
@MarineDockSystems
Ай бұрын
Yes we make these 👍
@_onesimpleidea
Ай бұрын
@@MarineDockSystems And the question about material?
👍
Aluminum frame fastened to plastic floats with stainless bolts.
How do I get about purchasing this unit and get it over in Québec, Canada ? And what would be price approximately with delivery.
@MarineDockSystems
Жыл бұрын
It’s a bit to large to ship to Canada. I can sell you just the polyethylene floats and give you a drawing to get the frame welded up locally. Regards Brett. Where are you in Canada. I was born in Trenton Ontario. I live in Sunny Queensland now Australia 🇦🇺
@danielquenneville3561
Жыл бұрын
@@MarineDockSystems so how much in Canadien dollars for your largest floats 36’ feet long. X 2.
@MarineDockSystems
Жыл бұрын
@@danielquenneville3561 polyethylene floats 33 feet long $9500 ca I will have to get some freight costs on Monday.
@danielquenneville3561
Жыл бұрын
@@MarineDockSystems now you gave me a price on floats. What about the floor deck. It seems to be 2x6 aluminum square tubes. My plan is building a 36’x12’ house boat. 8’ front deck and 4’ back with hard top deck. The built will be totally aluminum construction. Question?? With your experience, would 2 floats be adequate ? I’m planning to propel the boat with 2 Yamaha 50 hp Bigfoot.
@MarineDockSystems
Жыл бұрын
@@danielquenneville3561 Hi Daniel please send me your email address so I can send you some information.
What are the wait times on something like this to be built?
@MarineDockSystems
Жыл бұрын
4-6 weeks at the moment. Might be faster? Regards Brett brett@dynaplas.com.au
@cryptoknight6425
Жыл бұрын
Thanks Brett 👍🏼
how much does this cost in usd?
wish you could ship to the US. i'd love one for a build i want to do.
@_onesimpleidea
Ай бұрын
@MarineDockSystems Can you ship the pontoons internationally?
Weight is 4500k is that because of the float weight or because of the aluminium frame? Cheers
@MarineDockSystems
8 ай бұрын
That’s how much it can carry
@MONK-7
8 ай бұрын
@@MarineDockSystems cheers
Can’t I just buy blue 55 gal drums? And build a frame for them?
@MarineDockSystems
7 ай бұрын
Yes you can. The advantages of these floats are that they are food grade, 8 to 10mm thick and can be bolted at the top so you don’t have straps around them. You can also get them through survey if you wanted to rent your boat out or do an Airbnb. Regards Brett
100 x 33. Quatoon 64 x 24. Ft
2 inch draft toon alone
10 ,L x 3.8 w
622 kg toon ÷ 10800 kg 12 tune displacement 5.7%
0:06 10 x3 33x12 0:19
How can i order the float sir?
@MarineDockSystems
Жыл бұрын
Please contact sales@marinedocksystems.com.au kind regards Brett
1:1 linear/square ft
12 float 840 liter/ kg displacement 10 080kg ttl disp
Is this available in the US
@MarineDockSystems
2 жыл бұрын
Not at the moment we need a US distributor
@blindade1
Жыл бұрын
@@MarineDockSystems How about south africa?
@MarineDockSystems
Жыл бұрын
@@blindade1 no we don’t have a distributor in South Africa but we can quote freight if you know what you want please email sales@marinedocksystems.com.au
14k x .67 frame About 10k usd
8 x 10m l. 80 m 24 x 4m w. 96m 176 m alu 40 sq m ÷ 176 .22 m deck per 1 m long alu 4.4 long alu per 1 sq m deck
Alu 10 kg m sq Stee 5.4 x more
How much would this cost
@MarineDockSystems
10 ай бұрын
Please email sales@marinedocksystems.com.au and let the know what size your after.
1022. Kg ttl
407 sq ft
Pontoon 622 kg. $9,600. Frame 400 kg $13800. 1022kg ttl $24,400 38 sq mt Gross weight 4500 kg
881 lbs frame 407 sq ft .983 sq ft per kg
About $7000 12 toons 10,080 liter
400kg Frame 622 kg toons
4500 kg disp
600 ft & lb 2x6 alu 10$ 6000$ + 7000& labor..
2180 kg ÷40 m = 54kg m
10 x4.8 0:08
How much
@MarineDockSystems
6 ай бұрын
Hi this one is currently 33k inc GST Please email sales@marinedocksystems.com.au
0:22. 9k 0:33 13k
176 m steel rail rr 135lb yd 66 kg m Steel rr rail 176 m weight 9900 X .20 * 2138kg × $.37 us $ 788 ÷ 13800 17 x cheaper 5.7 % * 5 × less or 1/5 .20 Because dont use but 20% of rail and use less of framing
@aggabus
24 күн бұрын
788÷40. 19$ m sq
13,800 ÷ 176 m l 78$ per m l $13800÷40 sq mt $345 sq m 13800 ÷ 400 kg $34 kg & sq m
that's spam
@aggabus
2 ай бұрын
Do tell?? 0:21
Way overpriced
@aggabus
2 ай бұрын
1 USD = 1.5 Ausd
What is he calling GST ?