Love info like this, a lot of valuable stuff compacted into 15 minutes, thank you

@DriftJesus

3 жыл бұрын

Yeah , I'm always annoyed by videos which show 5 mins of unboxing and talking about talking. Wanna make sure we never do that!

7:02 the thing you did with the mesh on the trunk looks clean, way better than a massive hole in the rear window or trunk

@DriftJesus

3 жыл бұрын

Thanks! I'm very particular about air in- and outlets, makes or breaks the car visually.

@fuckngreat8955

3 жыл бұрын

@@DriftJesus very true

That e46 Looks so good, i prefer the pre facelift, but seeing this thing in all black with the widebody looks so damn good👍👍👍

Excellent walkthrough, thanks. It's always good to see how knowledgeable drift guys setups work, helps us all in the Drift community 👍

@DriftJesus

3 жыл бұрын

Thank you! More to come

This is pure beauty !

Love how informative this video was DJ thanks for uploading can't wait to see more!

@DriftJesus

3 жыл бұрын

Yep lots more of these coming! This is a back-up car, for some of the other cars that are more elaborate builds, we'll do 30min video's.

That is a beautiful car!!!

@DriftJesus

2 жыл бұрын

thanks!

Love the design of the rear mounted rad. Can’t stand the pick up truck cut window either!

@DriftJesus

3 жыл бұрын

Haha was afraid to offend people, and lot of guys build for functionality, but I just prefer the profile of the car to be nice. Drifting is a spectator sport and I'm old fashion haha!

@SmilinBastard

3 жыл бұрын

Couldn’t agree more

That's a very Nice build, there a so much Nice Details... Like the Airliftjacks, or the removable Cooling-System-Housing... 🤩🔥🤙

@DriftJesus

3 жыл бұрын

Yep, had to be easy to remove and install! Otherwise its also impossible to fit radiator.

@sidewaycrew1271

3 жыл бұрын

@@DriftJesus this is Genius... If you're on Event, you loose not so much time... when Service is needed

Very nice love the 4 door build definitely gave me some ideas thanks alot for this

@DriftJesus

3 жыл бұрын

Main reasons I choose a 4 door ; easier for rear mount , and easier to replace doors than quarter panels. Also its a lot easier to find a solid sedan shell. Plus they are a little lighter than coupe.

@haydenmidyette8918

3 жыл бұрын

@@DriftJesus exactly haha im planning on doing something along these lines for my 325i and man I dig the custom headlights hella thanks for the reply I wasn't expecting it I definitely appreciate it man 🙏

@DriftJesus

3 жыл бұрын

@@haydenmidyette8918 oh yeah I try to reply to every message! If you take the time to write, I'll find the time to reply!

@haydenmidyette8918

3 жыл бұрын

@@DriftJesus thats whats up, man of respect fs 🙏

Nice build 👌🏽

a beast of a car,good work indeed, nice video.

@DriftJesus

3 жыл бұрын

Thanks, car is very easy to handle!

Super interessant! 🔥

@DriftJesus

3 жыл бұрын

Thanks! Komt nog veel meer aan!

Einzel I'm loving your e46 content. You are budget where needed (tablet dash) and spend where it counts on good parts. What ecu are you using that works with the tablet?

@DriftJesus

3 жыл бұрын

I use an ECU Master. the tablet is just a backup for the real gauges, this way I can see what the ECU sees. All my cars always have needle gauges

Einzel, what is your recommendation for the driveshaft? I'm currently using bmw e90 325d gearbox behind my 1JZ in the JZX100 Chaser I have. in the front, im using the front part of a e60 530d driveshaft, with the OEM guibo thing (the round thing on bmw driveshafts). In the back im using the rear end of my Toyota auto driveshaft, which is connected as stock with bolts to the differential - which means i dont have any telescopic part anywhere in the driveshaft.

@DriftJesus

3 жыл бұрын

With giubo and two piece you don't need telescoping. Hard mounted engine and subframe + giubo , you could get away with single piece. We always go for single piece telescoping with solid flanges on BMW style boxes, but ofcourse preferred is GForce gearbox with slip yoke for single piece shaft. Anything single piece must either be slip yoke or telescopic

@stilianjelev3006

3 жыл бұрын

@@DriftJesus Thank you, sir. Your attendance in DW2 has been a revelation. I will be waiting for all videos you do on drift/race cars. And hopefully, at some point this year i'll try to order Feal Suspension for the Chaser through your company. p.s. I've always known that the e46 chassis is a great one to start a build with, especially for those of us living in Europe, and you are giving examples why it is

@DriftJesus

3 жыл бұрын

@@stilianjelev3006 yep, just shoot me an email and we'll be very happy to supply Feal; it will transform the car.

Do you have build thread or smth with photos ?

@DriftJesus

3 жыл бұрын

Most of the worthwhile pics are in the video I think, otherwise follow my instagram followdriftjesus, may have some more on there!

Where can i find the overfenders 😍 car looks epic dude im very jealous.

@DriftJesus

2 жыл бұрын

Its custom made , as said in video we made it to match the width of the coupe :)

@misterdan2230

2 жыл бұрын

@@DriftJesus now thats embarrassing I've watched it atleast 3 times and still missed it lol ( aint watched it today though) 😅 well anyway its a epic build well done

@DriftJesus

2 жыл бұрын

@@misterdan2230 thank you, much appreciated

Do you sell or have the dimensiones of the engine mounts

@DriftJesus

2 ай бұрын

Email our office - info @ einzel . nl

Any tips for a 320D to m54 conversion?

@DriftJesus

3 жыл бұрын

Get an entire car to swap over, or you'll end up needing a million little things. Also, secure the oil pump nut with safety wire

Yoo hele gave e46, welke body kit is dit precies?

@DriftJesus

Жыл бұрын

Custom made

Hey guys i have a question i have a e46 tha im gonna do a m50 swap as well can u guy tell me what would i need to make this possible?

@DriftJesus

Жыл бұрын

Depends on the application, this car is standalone ecu and wiring and the mounts are custom made. There are no OEM motor mounts that work to put an M50 into an E46

@cicodrifts309

Жыл бұрын

@@DriftJesus u sure cause i heard tha the m54 mounts can go on the m50

@DriftJesus

Жыл бұрын

@@cicodrifts309 nope

@cicodrifts309

Жыл бұрын

Thanks

@DriftJesus

Жыл бұрын

@@cicodrifts309 internet is full of misinformation. And what people call "fit" often isn't fitting. The alloy motors are different from the iron motors and there is no set of mounts that works. Apart from that, in a turbo application you'll need a custom passenger side mount anyways, bottom mount is what you want on these motors.

more cell phone footages, less pictures!!!!

@DriftJesus

3 жыл бұрын

Haha yes this car was built before I started the channel. So no video footage from the building process, figured people would still like to see!