Thats Cool fully 3D printed Boat Max! 😃

@MaxImagination

5 ай бұрын

Thanks, bro! Have a nice weekend 😁

Well done Max... 👏👏👏 Your 3d printed projects are very nice would like to see more stuff like this 😃

@MaxImagination

5 ай бұрын

More to come! Thanks, bro! 😃🙌

Wow! That’s an amazing 3d printed boat⚡️

@MaxImagination

5 ай бұрын

Thanks, buddy! ❤

Great work brother 👏 You nailed it and it's my childhood memories where I build a rc boat by using thermocol and you build far better from it and looks so professional one and thanks a lot for giving tips for other creators for making their work easy and the studio lighting theme is awesome 😎

@MaxImagination

5 ай бұрын

Thank you for your kind remarks, Kumar! I appreciate it, brother 😎

Man... great project and video. 3D Printing can be waaaaay improved, though!

@MaxImagination

5 ай бұрын

Thanks for your comment. Yup, there was too much stringing present in these prints, I have now tuned my printer to retract at the right speed to avoid this next time. We live and learn!

Congrats for this feat: Building this RC boat from scratch in a day. For me 3D-printing has become THE technology of the new millenium.

@MaxImagination

5 ай бұрын

Thanks for your comment and for watching!

You can make leakage past the shaft less likely by coating it with the petroleum jelly before installing it.

@MaxImagination

4 ай бұрын

That is what I ended up doing. Thanks for posting this comment to remind others. Cheers.

Wow! I didn't know JLCPCB MC had those mechatronics stuff, I'll definitely check it out!

lots of love from india❤❤❤

@MaxImagination

5 ай бұрын

I appreciate it! ❤

great project!! i am happy JLCPCB reached out to you. and you deserve more followers

@MaxImagination

5 ай бұрын

Much appreciated! I'm happy they sponsored this video and reached out with a helping hand through me to viewers who also want to make projects as such without their own 3D printer 👍

Nice Detailed explanation 👏👌

@MaxImagination

5 ай бұрын

Glad you liked it. Thanks!

ive been looking into building large scale (around 8-10 ft lengths) rc boats modeled from stuff like the Iowa, Pensacola, and even a Nimitz, i wanted to make them jet propelled, thank you so much!! since ill have so much space... i may even do 2-4 jet motors, 1 or 2 on each side :)

@MaxImagination

Ай бұрын

Glad my video and project has brought you some design inspiration :) Very cool! Best of luck pulling off your boat project!

Nice Boat, looks like your filament mightve gotten a bit moist too, try and dry it out should reduce all that stringing.

@MaxImagination

5 ай бұрын

Thanks for pointing that out. I will most likely obtain one of those dry boxes. Cheers!

@TAPSSebas

4 ай бұрын

it is also a ender 3 and it cant print that good

@NorthseaKoala

4 ай бұрын

@@TAPSSebas I don't know where you got that Idea from, but Ender 3s are perfectly capable of making good quality prints.

@ThoughtlessMoose

Ай бұрын

​@@TAPSSebas its the ender 3 v2 which can print well, I have an ender 3 pro and it has printed with no strings for a long time, I forgot what I did to remove stringing, but it wasn't moist filament

Thid chanel is amazing. Great video!

@MaxImagination

5 ай бұрын

Thank you so much!

Great work!! Love it 🎉

@MaxImagination

3 ай бұрын

Thank you! Cheers!

You are very very great ❤

@MaxImagination

5 ай бұрын

You are!

Great build, Max 👍😊

@MaxImagination

5 ай бұрын

Thank you, James! Cheers!

Great job bro ❤

@MaxImagination

5 ай бұрын

Thanks for watching 🔥

thats so cool man. u are the best youtuber i have ever seen

@MaxImagination

4 ай бұрын

I appreciate that!

Well done! I was surprised how small it was,very cute but capable looking boat. I noticed you had a lot of stringing on your 3d prints. You should probably play with your retraction setting and if your in a humid environment consider making (or buying) a dry box. You can build one for very cheap and in the meantime you can dry out your pla filament by placing it on your bed spaced up with something like Popsicle sticks and place a box over it with small holes on the top. Then heat your bed to like 50C and leaves for several hours. That should dry out the filament.

@MaxImagination

5 ай бұрын

Thank you, Asher! Yes, you made a good point there with what I should do to remove stringing, I'll try that! I'll also order one of those filament dry boxes. In the meantime, would keeping my filament rolls in a sealed box or dry rice work? Asking this since I do not live in a cold country to have electric blankets or anything of the sort. Cheers!

Hello Brother. great project. thanks. 🫶

@MaxImagination

5 ай бұрын

Thanks for watching, bro!

Awesome video dude.

@MaxImagination

5 ай бұрын

Glad you enjoyed it. Thanks!

I love all you project bro thx ❤

@MaxImagination

5 ай бұрын

Glad you like them! Stay tuned for the next one too! Thank you 😁

I love you my friend ❣️❣️❣️❣️

@MaxImagination

5 ай бұрын

Love ya for your kind support!

Noticed that your pla was stringing. Your filament seems like it is wet from mosture in the air. Just a fyi a heating box may help for cleaner prints and for the filament. Keep up the work!

@MaxImagination

5 ай бұрын

Thanks for your tip, I encountered some PLA storage boxes with temp adjustment. May consider picking up a couple of those. Cheers!

@joegroom3195

4 ай бұрын

@@MaxImaginationI think it has to do more with your retraction settings than wet filament. Try doing some retraction tests to determine the best setting. Need to also make sure the nozzle and bed don't have play in them and the belts are tight. You should be getting better prints out of that guy. Also, awesome video! Neat little boat! Glad you included the problems you encountered, it gives others a chance to learn from your mistakes as well. Going brushless might need a water cooled esc.

The jet engine is one of the inefficent propulsion for boats. Maybe you can try alternatives and compare them, that would be interesting

@MaxImagination

4 ай бұрын

The water jet is only as efficient as its motor. These in general do push out more water at higher speed, mine simply did not get a motor powerful enough. Will try with outboard engines and others in the future I'm sure.

Boat is great but 3d printing stringing is a nightmare so try dehyrating your filament and tweek a bit in retraction settings in cura the prints will look clean an smooth

@MaxImagination

5 ай бұрын

I think it's the humidity that's affecting my filament, it's mainly the while one that strings a lot. I will try with adjusted settings too. Thanks.

Have you done any robot arms yet? I feel like you'd come up with some really good designs for that too. Great build dude

@MaxImagination

5 ай бұрын

I have thought about it, but would prefer to create a robot arm with a defined purpose. Thanks for your comment!

Having never used a 3d printer I've always wondered what that outer ring that always seems to be around the party that's being printed. Is it some sort of reference?

@MaxImagination

3 ай бұрын

It is a reference line used to confirm proper bed leveling before it starts producing the actual print. Super handy feature to keep.

Does water leak into the boat through the impeller shaft hole? It looks like you put a rubber disk with a hole for the shaft, but how well did that work?

@MaxImagination

2 ай бұрын

It leaks through the top because of my weak sealant ring. The rubber disk only slowed down the shaft movement, so I removed it. Haven't encountered more than a drop of water leaking through the shaft hole.

Ive been 3d printing this myself on an ender 3, and was wondering how I could recharge the batteries after they die , or if I just missed it

@MaxImagination

27 күн бұрын

You can use one of these USB chargers with the battery's 3-pin connector - amzn.to/3yRqwFM

Really cool!

@MaxImagination

5 ай бұрын

Thanks for watching!

Awesome video, thanks for sharing! Try improving your print settings though

@MaxImagination

5 ай бұрын

Thanks, will do!

Amazing ❤. Your inventions never stop improving. Hope to see more innovative content😊

@MaxImagination

5 ай бұрын

Thanks a lot for your kindness! 😊 More to come for sure!

Cool!

Fantastic work, Max! Amazing little boat!!! 😃 About the water leak, PLA isn't waterproof. What you can do is to paint a thin layer of epoxy over it, for example. And there are lots of other ways to make it waterproof. 😊 BTW, a 20A esc should be more than enough for the 180 DC motor. I used cheap 10A escs on my WPLs with one of those (although they are probably brandless). Anyway, stay safe there with your family! 🖖😊

@MaxImagination

5 ай бұрын

Thanks for the tips, MC! I appreciate it. Totally agree, an ESC of a higher amperage would have done the trick. I may consider building a bigger jet boat in the future that is all brushless for peak efficiency and power. Thanks for you comment! Cheers! 😃

@MCsCreations

5 ай бұрын

@MaxImagination Sweet! Looking forward to it! 😃

cool boat

@MaxImagination

5 ай бұрын

Thanks for watching!

Nice boat. You should look into the Bambu lab a1 and do review on it

@MaxImagination

5 ай бұрын

I'll check it out. Thanks!

Hey dude, Please make a detailed video on how to make a Transmitter and receiver(of audrino nano and NRF module) and its programming, I have watched your previous video on it but iam totally confused, please make it , or a simple Rc car which includes a single dc motor with servo (or instead of servo for stearing you can use dc motor😅), and this transmitter and receiver, Please Dude I beg you 😢 Please reply if your are gonna make it 🥲

Bro u r just awesome and authentic 👍🏻

@MaxImagination

5 ай бұрын

I appreciate it! 🙏😁

Nice project keep up the good work

@MaxImagination

5 ай бұрын

Thanks, will do!

Sir make a rc drift car please and love from India 😊

@MaxImagination

5 ай бұрын

Thanks for your comment and suggestion. Will keep that in mind for a future project!

Great work!! 😃🙌🏽🚤

@MaxImagination

5 ай бұрын

Thank you! Cheers!

@joshuaaranguren1020

5 ай бұрын

@@MaxImagination no problem 😊

WOW!!

Sort out your retraction, that stringing should be non existent if the ender is set up properly, but thank you for the video, I'm going to do this project soon 😀

@MaxImagination

Ай бұрын

After this video, I had adjusted my retraction settings and the stringing is gone. Thanks anyway! Happy making 😎

what 3d modeling software do you use?

@MalaMooManMC

3 ай бұрын

Nevermind fusion 360! lol

Hello. How do you add custom titles? And also,is there a way to convert an automatically generated titles into custom titles?

@MaxImagination

5 ай бұрын

Hello. If you're referring to the engraved text on my boat design, that can easily be done with the text tool in Fusion 360 when creating a sketch.

@CenReaperYT.

5 ай бұрын

@@MaxImagination I actually meant video titles

@MaxImagination

5 ай бұрын

I first come up with titles myself and bounce them off ChatGPT to make them sound better.@@CenReaperYT.

@CenReaperYT.

5 ай бұрын

@@MaxImagination oh, okay

can you post basic

It's a bit unrelated, but how do you charge that tiny lipo (50mah)? The tp4056 does 1amps which will destroy them...

@MaxImagination

5 ай бұрын

Hi. You still use the TP4056 with such battery but instead, change out the current limiting resistor for one that's 10K ohms. You can look up "TP4056 current resistor rating chart" and you will see what resistor to use according to the battery's current capacity.

@Bocha69

4 ай бұрын

@@MaxImagination Ok thanks... helped a lot 😁

Did you make a motor mount of will I have to design that myself?

@MaxImagination

Ай бұрын

All you need is already in the design. The motor mount included.

@rcandstuff7342

Ай бұрын

@@MaxImagination ohh okay thank you

Bro how can i purchase ur materials in India?

@MaxImagination

3 ай бұрын

You may be able to search the names of each material I list and find them in your country's online store.

Fd Forward.h error in esp 32 cam bro please solve this problem fast please

@MaxImagination

5 ай бұрын

Hi there. I am unfamiliar with this error... Please try to search the same issue on forums online or ask the code author on GitHub for help by opening a new "Issue" - github.com/s60sc/ESP32-CAM_MJPEG2SD/issues

Hi max, could you please send me the files for the boat as I can’t find it in thingiverse

@MaxImagination

4 ай бұрын

Hi, I cannot send the files via KZread as of now. Also, my design files are not in thingiverse, but actually in Cults3d. Please click the links below.

@astr0yt344

4 ай бұрын

Thanks for replying

@astr0yt344

4 ай бұрын

Will definitely check it out

The printing temperature is too high --> stringing

@MaxImagination

5 ай бұрын

Thanks for your tip, will try with lower temperature.

First comment ❤🎉🎉

@MaxImagination

5 ай бұрын

🎉

great build but you need a better 3d-printer...

@MaxImagination

5 ай бұрын

What's wrong with my 3D printer?

@oftheborg

5 ай бұрын

Or just chamge the settings.

@MaxImagination

5 ай бұрын

​@@oftheborgExactly! Just changed the filament retraction settings and no more stringing...

So much stringing on the ender

@MaxImagination

2 ай бұрын

That might be due to my filament getting moist. I fixed that my adjusting temperature and retraction settings.

What happend with your stringing?? nice boat but printer needs some love.

@MaxImagination

5 ай бұрын

That must have been due to a roll of filament going bad. Will need to also tune the retraction settings a little. Cheers.

Wait, are you allowed to say ‘rice beater’?

@MaxImagination

5 ай бұрын

That is slang for the type of boats that use outboard motors as such shown.