Build The HASEGAWA 1/24 TOYOTA 2000GT
Тәжірибелік нұсқаулар және стиль
Build The HASEGAWA 1/24 TOYOTA 2000GT
#toyota2000gt #modelcar #scalmodeling
Index
0:37 Chassis
4:09 engine
12:43 Body Painting
16:26 Inside The Car
19:38 Finish Work
21:49 Figure
25:55 Complete Photo
HASEGAWA 1/24 TOYOTA 2000GT Super Detail Model.
This time, I made the Toyota 2000GT, which Japan is proud of.
This model is a limited edition with the addition of an engine made of metal and resin called Super Detail.
The main body itself is diverting the existing body.
* Precautions for assembly
engine
Both resin and metal parts can be easily assembled.
I feel that the resin parts are a little distorted, but it is within the allowable range.
When installing the resin parts on the chassis, erase the round extrusion marks on the chassis side.
All you have to do is to match the air cleaner of the engine with the intake port of the resin parts, and to ride the engine body on the lower part of the engine of the chassis without distortion.
For the detail improvement of the engine such as piping, I referred to the pictures on the internet.
Body installation
The tip of the main body is divided into upper and lower parts, and I think that it is normal to glue it first to erase the adhesion mark, but if you do so, a part of the added engine will interfere with the chassis and the main body. The main body does not fit in the chassis.
I scraped off the parts at the tip of the split body.
If you don't like it, you'll need to remove and paint the seams after assembling all the paint in this area.
There is a bumper around the seams, so if you glue the bumpers together, the seams will be less noticeable, but you can see them a little.
It is attractive that the body of Toyota 2000GT is integrally molded. It's an invisible part, so let's cut it.
Painting
Although it is white, I made the bonnet yellow and drew large and small red lines.
At first, the bonnet was also painted white, but if you draw a red line on the body of Hyoro Naga, it will look even longer visually.
I added the effect of cutting the red line before and after the bonnet with the yellow in between.
Rather than weathering, the white color of the old car has been reproduced.
Figure
Until now, plastic model figures have been poor, but with the introduction of 3D printers in the plastic model world, the details have improved dramatically.
Moreover, it is cheap.
I want you to release more and more 3D printed figure plastic models.
Next, I will make a MAZDA COSMO SPORTS !
Let's meet again!
thank you very much.
* HASEGAWA 1/24 TOYOTA 2000GT Super Detail Model.
Пікірлер: 31
凄く勉強になりました。ありがとうございます👍🔔
@scalemodeler
2 жыл бұрын
こちらこそありがとうございます。 未熟で至らない点が多々ありますので、恐れ多いです。 何か小さいな事でもお役に立てれば嬉しいです。 ありがとうございます😊
素晴らしいです👏👏👏 エンジン、内装、フィギュアまで完璧な細かい作りで感動しました😍 いつもながら流石です😄
@scalemodeler
2 жыл бұрын
ありがとうございます。これで、サス可動に出来れば人が乗った車高が再現できるのですけど、あの続き楽しみにしています！
凄すぎて言葉がありません！職人技で細部まで妥協せずリアルすぎてボディーも汚し過ぎず本当に参考になりました。ありがとうございました！
@scalemodeler
Жыл бұрын
ありがとうございます😊カーモデルの王道な作り方ではありませんので、そう言っていただけてとても嬉しいです😊 まだまだ未熟な所ありますが、日々邁進します！
@user-im8qe8qv7c
Жыл бұрын
俺もハコスGTRや240ZG等を よく組み立てています。 しかし此処までリアルな質感には 出来ないですね! 一度代行製作をお願い🙏したいですね!
@scalemodeler
Жыл бұрын
@@user-im8qe8qv7c ありがとうございます。 カーモデルの本流ではないので申し訳ないのですけど、とても嬉しく思います❣️
ウェザリングのやり方が 勉強になります。 水溜りとか泥の表現方法なども また教えて下さい。
@scalemodeler
2 жыл бұрын
ありがとうございます。私はアメ車のポンコツカーが大好きなので、昭和のスポーツ車とオートバイがひと段落着きましたら、雨晒しの車を作ります。 よい、アイデアありがとうございます😊
このスーパーディテール版は作った事あるんですが、地味に擦り合わせが大変なんですよね 自分も最後の組み込みのすり合わせに相当神経使いました スロットルリンケージはお見事でさらに精密感が化けますね しかし女子2人がこんな風に2000GT乗り回したのSNSに上げたら炎上不可避ですがw そんなifも出来ちゃうのが模型のいいとこですよね
@scalemodeler
2 жыл бұрын
いつもありがとうございます。同じもの作っていると色々とシェアできて楽しいですね。それも模型の楽しさですよね。私は車模型初めて一年少しなんですが、”そんなif ”だらけなんです。 お叱りもあるのですが、これからもそんなifの言葉を使わせてください😊
everything is awesome except brake lines should be hard metal lines not hoses.
@scalemodeler
Жыл бұрын
Thank you very much❣️❣️ From now on, I will use metal wire as much as possible for the brake line.
Superbe bravo!
@scalemodeler
9 ай бұрын
merci!
Sir you are a true artist! I really don't understand how you know how to combine the paints so well, do you have a background as paint artist, or you just learned by doing? I am also doing scale models, but I never did weathering, I am really afraid of it haha. Keep up the good work, I am really glad that I found your channel, good luck!!
@scalemodeler
Жыл бұрын
Thank you. My model background is monsters and AFV models. I also draw illustrations with acrylic paints as a hobby. My painting is layer painting. The key is to apply the colors in thin layers. The trick of painting is painting, peeling off, painting and repeating. Therefore, use a lacquer paint with a strong film for the base coat. Weathering all-purpose paints are Sundy Wash, Stain Brown, and Ground Brown. Most weathering is possible with these three colors. I am also very happy to meet you. Thank you.
Very nice and great painting technique😍
@scalemodeler
11 ай бұрын
Thank you❣️❣️❣️😊
Most excellent video, many thanks!
@scalemodeler
Жыл бұрын
You’re welcome ! Thank you so much!
押入れから懐かしいVHSを発掘しました。 トヨタ2000GT「おめでとう」世界速度記録 & 第1回「車でシアワセ杯」争奪スロットカー選手権 kzread.info/dash/bejne/hJaAmthxncaflZc.html
@scalemodeler
14 күн бұрын
こう言う貴重な動画は価値ありますね。 作る前に知っていれば同じカラーリングにしてました。 ありがとうございます。
@misora-news
14 күн бұрын
@@scalemodeler Easy modeler's roomさんの色彩の感覚の方が自由でお洒落だと思ひます。エスハチの動画も拝見しましたが、カラーリングのみならずウェザリングのレイヤーの入れ方も絵画的で、これは模型が芸術表現だといふことを教へてくれました。
👍🏼
@scalemodeler
Жыл бұрын
Thank you😊
Awesome !
@scalemodeler
Жыл бұрын
Thank you😊😊😊
凄い是非製作依頼をお願いしたいです!
@scalemodeler
Жыл бұрын
ありがとうございます。 アメ車のピックアップ、ビンテージオートバイが大好物です！