Build a Tire Changer! DIY for Motorcycles, Stainless
Автокөліктер мен көлік құралдары
#tirechanger #MotoDIY #Stainless
I know having a tire changed isn't that expensive. But I really like building things like that and being able to do as much as possible myself.
Here is a list of some of the products I have used. You don't necessarily have to order them online! I am sure you will find something in your local hardware store too!
0:13 Plan and draw
0:28 Materials
0:51 measure
1:00 cut like Lee
1:14 mark
1:19 cutting to size
1:38 mark for drilling
1:47 drill
2:02 threading
2:29 saw
2:58 Plate for Duckhead🦆
3:28 Polish the screw🔩
4:00 measure the radius for Demount Arm
4:18 welding
5:00 Caps attached
5:27 Install the stopper
5:46 Cut rubber pads
6:23 assembly
7:17 next time
Tire paste: www.amazon.de/Rema-Tip-Top-Re...
Brush: www.amazon.de/Ringpinsel-Gr%C...
Mounting levers: www.amazon.de/dp/B001ILAGJ0/r...
www.amazon.de/BGS-Reifen-Mont...
Duckhead: renngrib.de/shop/montagekopf-...
Knurled screw: www.amazon.de/KIPP-Sterngriff...
Rubber screws: www.amazon.de/Ganter-Normelem...
Plastic caps: www.amazon.de/DECARETA-Rohrst...
Plastic scraper, Clamps and Weights in the next video!
Rim: Rear wheel of my Scrambler 1200XC
Tire: Mitas E-10 Dakar
Cameras: GoPro Session 5, GoPro 7Black, Samsung S10
Пікірлер: 100
Nice work! Also loved the witty, efficient (no talking, very fast and well-videoed) delivery.
Super Arbeit! Und perfekt gefilmt 😉
Good job, very inspiring.
Good job. Inspired.
Cara kerja yang sangat rapi👍
Super Sache!! Werde ich wohl auch mal nachbauen 😁
Looks just like the Olmax tire changer from Poland that works great!
@q-bigwerkstatt2
Жыл бұрын
Yes, that's what some have already said. I can really recommend this one, value for money is really good.
@anxiousappliance
29 күн бұрын
The Olmax is super nice, and a good value.
Just came across your video. Nice work
I wish I was this talented
Ive seen this style in action its awesome and easy, fine workmanship, hey polish those carriage bolt heads, nice touch
Beeindruckend genial dieser Typ ☝
Nice job and glad the poor old Thruxton got protection this time.
Sehr geil, wie sauber und genau hier gearbeitet wird!
Super gemacht
Beautiful work
@q-bigwerkstatt2
2 жыл бұрын
Thanks for Sub!
fantastic
Nice job, I love your work. 👌 Thank you for this video. Can you please tell me dimensions of the tyre bead breaker . Dimensions of plate, arm and fork. The distance between the holes. I will make all this. I already started so I will be very grateful for this informations. Thank you in advance.
Like your hand made bro
Parabéns meu amigo top
Nice
I'm about to do this same thing, after seeing the prices of similar tire changers.
0:23 some dimensional lengths would come in handy so that we do not have to re-invent the wheel. Supply those dimensions and I will buy you a few Augustiner Edelstoff beers when I am there. Edelstahl...typisch Deutsch! And at 2:03 we have to talk about that target with shots all over the place. They should all be in the X. Kaufen Sie sich einen Feinwerkbau. Nice TIG welds! Top construction. Das mag ich!
@q-bigwerkstatt2
2 жыл бұрын
You just have to get the dimensions from your bikes, I built my construction in such a way that I can use from 17"- 21". I've written the measurements somewhere in the comments below, see if you can find it. Otherwise, I'll measure it when I get a chance, I don't have it in my head right now. The target is a souvenir from Texas, I shot with an AR15 full auto for the first time😂
That is very good that you show this here for free! But you have to have so many tools to make it like welding machine, drill press, bench, grinder etc. Also you have to know how weld etc )) But anyway thx for sharing!
@q-bigwerkstatt2
3 жыл бұрын
You are welcome! Yes you are right it is really a lot of work. You can also build it from normal steel. I built it out of stainless steel because I'm a really bad painter!If you add it all up, it will not save you any money. I built it because I just like building things like that and love to be able to do as much as possible myself.
@NVK85
3 жыл бұрын
@@q-bigwerkstatt2 Oh, looking at your videos it looks so easy that it makes me want to build it too) Just need to get necessary tools first.
Astrein!
Nice but what was the build cost?
អេម
Do you have a project file?
❤❤❤❤❤❤❤❤
Great build - some questions - Where did you source the centering cone that slides down the shaft? The one thing I can't find... - The unit in the video where you use it has a couple of bolt heads showing on the frame that weren't there on the build version.. what are they for? - Curiosity question - why two arms out the bead breaker side rather than just one in the middle? I'm sure there must be a reason.
@q-bigwerkstatt2
11 ай бұрын
Hello, thanks for your interest! I got the cone from a friend, it just happened to fit the 20mm shaft. The two square tubes on one side are there to prevent you from getting centered with the lever. The screw heads you mean are for mounting, either on the floor or on a workbench.
@q-bigwerkstatt2
11 ай бұрын
you don't necessarily need the cone, I've often done it without it lately. There will also be a new video about it soon.
Best moment: 6.05
Bellissimo progetto. Peccato che non hai inserito le misure del progetto. Mi piacerebbe realizzarlo anche io. Potresti inviare le misure del progetto? Ancora complimenti
Hola amigo un saludo . Gracias por mostrar la manera de fabricar esa herramienta. Me puedes indicar en dónde puedo comprar la pieza que sacar la llanta o goma . Esa pieza negras semi redonda . Gracias
@q-bigwerkstatt2
3 жыл бұрын
renngrib.de/shop/montagekopf-fuer-reifenmontiergeraet/ This is a German Page, maybe you find an other one in your location. Or you ask "renngrip" if they shipping to you.
@q-bigwerkstatt2
3 жыл бұрын
Search for " Duckhead"
👍
Great video, great work, refreshing! To do this myself does not seem very practical because I prefer spending 100 EUR for a similar tool from a shop, but above all I unfortunately do not have all the fancy tools you have to create this tool :-). Your garage must be a Walhalla for us DIY-ers
Can you post a video of your vise please
How much would you charge to build one and ship it to me
Danke für das Video! Du hast dir einen neurn Abonnenten verdient. :) Hast du eine grobe Richtung, was der Bau gekostet hat? Also nur das Material, Zeit rechnet man ja für sein Hobby nicht. Wenn du das schätzen kannst auch gerne bei normalem Stahl.
@q-bigwerkstatt2
3 жыл бұрын
Vielen Dank für dein Abo:) Ja richtig Zeit und Werkzeug darf man bei solchen Dingen nicht rechnen, sowas selber zu bauen würde ich auch nur Leuten empfehlen die bereits Werkzeug haben und bock auf sowas haben. Die Preise von den Einzelteilen habe ich in der Videobeschreibung verlinkt, das Quadratrohr habe ich aus dem Stahlhandel um die Ecke, da musst du einfach mal anfragen, die Preise spielen derzeit verrückt. Ich weiß nicht mehr was ich dafür bezahlt habe.
I'd like to know the specification of the pipe in the video. I want to know the size and thickness of the pipe.
@q-bigwerkstatt2
3 жыл бұрын
Hello my Korean friend! The tube in the middle must be the diameter of your axis. In my case 20mm. The long tube with the handle has a 30mm square tube attached to one end. Take a ¾ "pipe and make it fit a bit.
@rainbowtech8430
3 жыл бұрын
@@q-bigwerkstatt2 20mm and 30mm tube is thickness ?
Where did you get the piece that breaks the tire from the rim?
@q-bigwerkstatt2
3 жыл бұрын
this is just a scrap piece of flat steel made of stainless steel
@q-bigwerkstatt2
3 жыл бұрын
weld it to a piece of 40 mm square pipe
love the design but i don't have a lathe what could i use instead that gives close to the same result
@q-bigwerkstatt2
Күн бұрын
@@diegojosephia hi thanks for looking! I don't have a lathe either, I used a friend's. you can of course use a suitable tube directly. Pay attention to your measurements. I have 20mm on my Triumph, if I use other rims I use bushings or cones
@diegojosephia
12 сағат бұрын
@@q-bigwerkstatt2 yes thank you i am working on aport bikes more so the variable size comes in handy! Great design and this one is one of the first that meets my expectations thank you
Dude,you are amazing I would say that you should sell these, but seeing you own 2 triumphs (or thats what seems) and having that kind of tools in your garage looks like you have your econoical life solved, and you are just doing this for hobbie. Soo saying that, Good vid you just earned a new subscriber from Uruguay :)
@q-bigwerkstatt2
2 жыл бұрын
Thanks for your subscription! I'm just a hard working mechanic😅
@federicocao574
2 жыл бұрын
@@q-bigwerkstatt2 well, Keep doing the good work. :)
This is a copy of the olmaxmotors tyre changer or very close 😁... Great job mate stainless Steel is great too to build from... I've just bought an olmaxmotors one hence my comment if I'm wrong i do apologise..
@q-bigwerkstatt2
2 жыл бұрын
yes, right, I also orientated myself on the Olmax and on some other manufacturers. I have already recommended the Olmaxmotors to someone because it is really good in terms of price and quality.
Hallo! Darf ich Sie um eine Zeichnung bitten?
Looks like the same one from Olmaxmotors
Exact copy of Olmaxmotor Poland?
@q-bigwerkstatt2
2 жыл бұрын
not exactly but I used his as a guide, among other things. That's why I recommended him several times in the comments. I think it's the best value for money.
what are the measures of the project?
@q-bigwerkstatt2
Жыл бұрын
I think I mentioned it somewhere in the comments. But you better do it like I did in the video and measure the wheels you want to use with it. I made mine from 21" to 17".
Kren alate
Excuse me Thickness of white iron square tube?
@q-bigwerkstatt2
3 жыл бұрын
35mm and 40mm it fits together 👍
@q-bigwerkstatt2
3 жыл бұрын
I think 2mm thickness
@a761111abc
3 жыл бұрын
@@q-bigwerkstatt2 Thank you very much.
@a761111abc
3 жыл бұрын
Excuse me What is the diameter of the solid iron rod passing through the wheel frame in millimeters?
@q-bigwerkstatt2
3 жыл бұрын
@@a761111abc 20mm
Can you share the drawings?
How much Bro, if i want to buy it 😊 ?
@q-bigwerkstatt2
3 жыл бұрын
Thank you for your interest, unfortunately I have very little time to build more of them at the moment :(
@cecepsubarnas6159
3 жыл бұрын
@@q-bigwerkstatt2 ok no problem Bro, I understand about your activity, but however I interest about your creation, thank's
Super gemacht. i want to build this tire charger. Do you have dimensions? I miss them in the workplan. Please send me a email.
@q-bigwerkstatt2
3 жыл бұрын
Danke Timo! I built my tire changer for my Scrambler 1200. So it is suitable for 17 "- 21". Make sure that my measurements are also suitable for your tires. The main frame: The five blocks of support surfaces: 150mm long The long one with the 20mm hole: 700mm long The shorter one with the 20mm hole for the stopper: 330mm long The two parallel: 500mm The little one in between: 120mm With this you will surely get ahead first, the rest you have to adapt to your application purposes. Thanks for watching and subscribe!
@Ki777UMiNATii
Жыл бұрын
@@q-bigwerkstatt2 🙏
Hola,medidas del artilugio tienes😂
@q-bigwerkstatt2
11 ай бұрын
somewhere in the other comments I have listed the dimensions, but I would recommend measuring yourself, I built my device for 17" - 21" approximately. when I wanted to mount a 15" and 16" wheel it was difficult. see what you need best
@q-bigwerkstatt2
11 ай бұрын
en algún lugar de los otros comentarios he enumerado las dimensiones, pero recomendaría medirse usted mismo, construí mi dispositivo para 17 "- 21" aproximadamente. cuando quería montar una rueda de 15" y 16" era difícil. mira lo que mejor necesitas . espero que funcione la traduccion de google
@rogeliogomezjimenez-fe1et
11 ай бұрын
@@q-bigwerkstatt2 ok gracias,👍
Brapa satu paket bos
Hola amigo me puedes pasar los planos con medidas
@q-bigwerkstatt2
3 жыл бұрын
read my answer from "Timo Scheffers" I hope this helps you. 🙂
$500 dollars later and probably at least 6 solid hours of work and you have a Tyre changer. That’s a lot of tyres you need to change to justify that. Maybe you could do the whole neighbourhood and charge $10 bucks a Tyre. Nice work though.
I`LL do you a favor ,sell it to me so you can build another one
Why dont you patent your design and start making them
@q-bigwerkstatt2
Жыл бұрын
Hello Austin, there are already too many very similar devices and I think if I want to sell a small series lucratively, it will be too expensive for the end customer. Then there is a lot of work in it. In addition, many do not dare to change a tire themselves. I hope this video gets my viewers to build their own. For example, one man rebuilt my scissor jack and was thrilled, I'm just happy about that 🙂 Greetings from Germany
Kannste nicht meckern
Stainless steel is completely unnecessary. Just throwing away money.
@esthercorbishley9742
11 ай бұрын
Well it wont rust and look just as good in 10 years time
👍