Build 4x4 Comp Style Rock Sliders (Made EASY)
Автокөліктер мен көлік құралдары
#build #4x4 #offroad
Making the ultimate set of DIY Custom Rock Sliders for The GQ Patrol Ron Burgundy! Using this kit saves a crazy amount of time and also special equipment is not needed, simply pick a design and get welding to build a completely custom set of rock sliders!
DIY Customs;
www.diycustoms.com.au/?sca_re...
Our Website: roamlyfe.com
Socials: Roam Lyfe
Supported by;
www.outbackequipment.com.au/ (code: ROAMLYFE)
www.superiorengineering.com.au/
www.dieselconversionsaus.com.au/
adventurecorp.com.au/ (code: Roamlyfe10)
www.kingfabkustoms.com/
destaautomotive.com/ (Code: ROAMLYFE15) 15% Off
Пікірлер: 70
I remember the first diy sliders you did awhile back … i watch it over and over 😂😂 it helps me a lot doing mine before .. it’s my first time welding aswell 😂😂
Great Video. That Welding Fabrication table you made in an earlier episode, comes in handy. Buying Rock sliders in a kit saves a lot of time.
Great video! very timely I've been looking around for sliders for the current project.. this approach looks perfect! Thanks
@RoamLyfe
2 ай бұрын
No worries, hope it helps 🤙
Bloody early for once. Rons coming together well
The fact that i looked at getting these yesterday and now you have a vid of them make me want to get them😂
Watching you with that holesaw reminds me of my apprentices bending all my pilot bits 😂 happens to the best of us, i just take the hole saw off to drill the pilot hole first to avoid that then put it back on 😉
big girl is looking better and better each video sitting pretty with those sliders 💯
23:59 "Straight up big red" forshadowing an australian travesty
@RoamLyfe
2 ай бұрын
😞😞😞
so sick gonna grab a set for my 60 series project
@RoamLyfe
2 ай бұрын
Yeww! Make sure you use my affiliate link in the description 🤙
Great content luv your channel 👏 keep it going 👍, pitty about big & little red. Your beast would of colour matched up well on them 😆 😅😊
Rip the Big and little red 😢
@RoamLyfe
2 ай бұрын
RIP BIG RED
@NateH-qd7bm
2 ай бұрын
@@RoamLyfe was gonna say how do you bulldoze a rock wall
@felipeboroviec2420
2 ай бұрын
What happened to big red?
@NateH-qd7bm
2 ай бұрын
@@felipeboroviec2420 Big Red got dozed and little red is blocked off
@rorymyers5302
2 ай бұрын
Rip big red
Hi mate watching a few of your Vids , was the Navara reliable? I want to buy one but so many mixed reviews. Cheers thanks
What happens to that door clearance after you take a hit and the slider bends up a bit?
Good vid can you do own tint?
12.5 hour shift but still always got time for a roam lyfe vid
@RoamLyfe
2 ай бұрын
Bloody working hard!! Legend 🙌🤙
Nice vid! Out of curiosity what spec is the unimig?
Brooo, why didn't you put the holesaw in the drill press 😄
@MYeahman
2 ай бұрын
Legit I couldn't believe it 😅😅😅
Yeah mate straight up big red now 😢 keen for the video showing off in 2wd up it
@BRY5TL3
2 ай бұрын
Big red not there anymore sadly😢
Great job , I highly recommend to add some grip tape ( skateboard deck tape ) across the top
@RoamLyfe
2 ай бұрын
That’s actually a great idea , thanks for sharing 👌
Looks awesome and throw out that black paint 🤣🤣🤣
@RoamLyfe
2 ай бұрын
I know.. next job in the shed might have to be a clean up lol
@martyferry2678
2 ай бұрын
@@RoamLyfe black paint first 🤣🤣
Just as well you can’t get weld flash from watching your videos 😂 But they look good 👍🏽
Haha my Siri kicked in on the iPad but could hear ya properly 😂😂😂
@RoamLyfe
2 ай бұрын
Hahaha 😂😂
3:35 bloody got my phone🤦🏻♂️😂
@RoamLyfe
2 ай бұрын
Hahahaha, that’s gold! 😂
Is the affiliate link you mentioned for the slider kits missing?
@RoamLyfe
2 ай бұрын
Just added it!
What paint did you use? Good work mate.
@RoamLyfe
2 ай бұрын
It’s just a 2k satin black!
🤙🏼
@RoamLyfe
2 ай бұрын
👌👌
If you have your welder set right you won’t get splatter
Shell go straight up big red 100%. especially since its gone haha
@RoamLyfe
2 ай бұрын
Yep, can finally drive it bro 😂🥹
360 bar work would look tuff asf on this rig i recon
@RoamLyfe
2 ай бұрын
As in wrap it around the car? Brush rails and what not?
@brandon0871
2 ай бұрын
@@RoamLyfeyeah man
Chuck both gloves on while welding, and preferably long sleeves and pants, i know you dont feel the heat, but your kids will feel it when you get skin cancer
Big red and little red gone rip 🪦
@RoamLyfe
2 ай бұрын
Big sad! 🥹
First - real comment
@RoamLyfe
2 ай бұрын
Legend 👌
Got to be careful how much door clearance you have, if your resting on the slider it will move up, then you can't open the door.
Don’t try to stack dimes with a MIG it’s weaker than a solid bead.
No big red anymore haha
@RoamLyfe
2 ай бұрын
Big red hill 😞
Worried about when the sliders get bent up the doors won't open?
@CatNamedMilo
2 ай бұрын
I don’t think he’ll be off-roading this car that hard to the point where he bends it up
@RoamLyfe
2 ай бұрын
It definitely crossed my mind, the drivers side is a little steep.. haha I figured if they do bend i can always jump out the window or other side 👌
I'm not a medical practitioner but I wouldn't recommend hole sawing on your dot
@RoamLyfe
2 ай бұрын
Bahahaha, it can lead to serious discomfort 🫠
invest in some safety glasses mate
Face mask but no glasses for grinding?
@RoamLyfe
2 ай бұрын
Honestly I had been wearing them all day but they kept fogging up and I couldn’t see 😂😓
Press Drill Would Save Drill Bits