The authenticity of your channel and dedication to budget oriented gear keeps me here!

@WOLFTICKVIDEOS

3 жыл бұрын

Heck yeah man! That is awesome, we will try and keep it that way for sure, but I will give you a little insight just cause you are a subber!:) It looks like we are getting 2 pairs of forks that are waaaaaaay not budget, now dont get upset its just a company that wants to work with us a little and gave us hell of a deal man!! So we couldn't pass it up:) Now that being said brother man, other than a situatio like that, we will keep it BUDGET!!! 💙💙 Thank you we really enjoy hearing from our subbers man:)

@Outdorsenit

3 жыл бұрын

I second that!

I watched this video last summer (and all your videos...love them) and it was one of the reasons why I installed the IXF crankset to my GT avalanche build. But while riding in winter snow, slush and mud, one of the BB bearings seized so had to swap it out. Anyway my BB width is 68mm and when I initially istalled I didn't put any BB spacers like how you did. However, i recently learned that spacers are important and are needed when installing a BB. For 68mm width BB you require 1 spacers on nondrive side and 2 spacers on the drive side. If you have a 73mm BB then only 1 spacer is need on the drive side. This keeps a better chain line and leaves a little bit more space clearance between the crank arms and chain stays. Also I learned that if your BB gets seized, you can just replace the bearings instead of buying a new BB. The sealed bearings for IXF BB or any Shimano hollowtech BB is "6805 RS" (rubber sealed) and this measures out to 25mmx37mmx7mm which fits exactly in a Bottom bracket cup/shell. I purchased 10 sealed bearings for $20 Canada (cheaper for US). Way better then spending $30-50 for a new BB. You can even buy ones with ceramic bearings which cost more but are supposed to be better. Just some money saving since I know bike parts add up. Shimano, Sram and other companies say you can't take out the bearings which is not true. I fixed my IXF BB and it works like new and just as good as my Shimano hollowtech BB. Cheers Guys.

@WOLFTICKVIDEOS

2 жыл бұрын

Cheers brother, I appreciate the review and part numbers. I have learned after many bikes and cranksets the spacers are recommended but depending on the job, it does vary. But all in all it's a good rule of thumb 👍 Thanks for watching all of our stuff brother, and totally got to get me an extra BB now!!

That’s almost exactly the same setup I just ordered. Only difference is the brand of chain ring. It’s a 34 tooth. Then I hope to turn it into a 1x10. Love you guys and your channel. Let’s hear it for the budget MTB riders. Not everyone has 3 grand to drop on a bike👍. But buying affordable then upgrading over time is the way to go. Love it!

@WOLFTICKVIDEOS

3 жыл бұрын

Absolutely agree man %100, its nice to be able to piece together something ha ha and not brake the bank BUDGET!!!!!!!!

I really enjoy your channel. I love mountain biking, but a lot of people out there just wanna have a fanciest/ latest stuff and forget about having fun. You guys keep it real. Thanks!!

@WOLFTICKVIDEOS

2 жыл бұрын

You are very welcome, thank you for the comment and it's about riding! Not the 5000 dollar bike people can't!

Just got my ixf crankset on with a 34t funn chainring. I had the same thing happen to me when I inserted the shaft the spacer popped out. With a little finesse I got it back in thanks again for your videos they help me alot.

@WOLFTICKVIDEOS

4 жыл бұрын

No problem Casey! It happens to the best of us ha ha. Appreciate the comment brother.

Wolf tic NationYou guys rock! I use a latex resistant band & rap it around my fork & to my frame so I can change out my handlebars and stem without dropping out my fork. It works well on my stand, you have to have a lot of tension on your rap To keep your forks from the hitting the floor. You guys give me the inspiration to try new things and build my own ride my spank Boundary is trail worthy and looks sharp.peace & love brother.

@WOLFTICKVIDEOS

3 жыл бұрын

Dustin that is a good idea! LOL I got a few of those (rehab bands) at the gym!! Need to do that :) appreciate you being apart of the channel and so glad to give you some inspiration man!! Just wait till we break our 6000 SUBSCRIBER BIKE OUT!!You will be even more INSPIRED:)

This was hilarious to watch! I too made a switch to the IXF crankset but I still go with a traditional round chainring. (I made pretty much all the same mistakes the first time I installed a hollow tech crankset.) It is important to check your pinch bolts on your crank arm after several rides, as it takes time to seat the splines and it loosens up.

@WOLFTICKVIDEOS

3 жыл бұрын

Glad you got some enjoyment brother!! HA HA yes its been a fun and very bumpy ride but I think I have managed to kinda check stuff!! LOL Appreciate you watching us brother:)😂😂😂

@JaxsonM22

Жыл бұрын

Hey, I know this comment is a year old but how is that ifx crankset holding up for you?

Have been looking for a crank set for my GT. This was one of the sets I was looking at. Glade I found this video.

@WOLFTICKVIDEOS

2 жыл бұрын

Awesome man, we use the hell out of them!!

Another great video! I ordered the same cranks for my bike and both of my boys' bikes and they've been good performers for us. I did shell my BB after about 3 months so I replaced it with a shimano saint and haven't had had any more problems. Neither of my sons had the same issue so I must have just got a bad BB. Keep up the good work!

@WOLFTICKVIDEOS

3 жыл бұрын

Awesome man! Thank you for watching brother, the IXF stuff seems to be pretty legit. We are happy with our 3 or 4 of them!! Lol thanks for commenting and hope to see you Friday!! Himalo fork initial impressions and....10,000 sub teaser bike!!!

I bought this set as well. Installed it yesterday and this is what I got as experience: I am converting a 3x8 to 1x8. Bottom bracket of the bike is 73mm. Before I disassembled the previous square taper bracket I measured the chainline. It was 50mm to the largest cog in the front and 45,5mm to the middle ring. Everywhere I read they recommend to use one spacer on the drive side. When I do this and mount the chainring on the inside, I get 50mm chainline. Bike works as if you are always on the largest gear on the front and chain stays straight with gears 6-7-8 on the back. But if you switch to lower gears like 5-4-3-2-1, then the chain angle is too steep. So, I removed the 3mm spacer and re-mounted. Now my default chainline is 47mm, which is closer to the middle ring on the front. Chain angle is not so steep on the largest and smallest gears. I am going to install 1,5mm washers, so I get the default for this bike 45,5mm chainline. This way it will always be on the "middle" ring on the front and that's the best you can get for an older bike I think. What I am saying is spacers are not always required for this set. That's my two cents.

@WOLFTICKVIDEOS

3 жыл бұрын

Well that is very extensive reasoning and thank you very much for the breakdown. I didnt use a spacer and didnt take it out after reading everyone saying I needed one. Then I installed one and it sounded funny so I removed it and whalla, its very smooth now and run it like that even with the 10 spd. So thanks for getting my back! You must of read th ecomments

Wolf: You don’t know 🤬… this is my favorite father son KZread channel 😅😂

@WOLFTICKVIDEOS

2 жыл бұрын

LOL!! Have to watch t again!! Love that intro as well, thanks Andrew! So cool you are checkin older stuff

That red color is nice bro. I installed this ixf crankset and snail narrow wide chain ring combo in black. After two weeks of using it never failed me. I use 1 spacers each side and it work great no alignment issue.

@WOLFTICKVIDEOS

4 жыл бұрын

ok well, I was wondering? After i posted the video, people told me I should install the spacer or spacers atleast one on the drive side? Why should I do that? just alignment? Thanks and hope to hear back from you soon. Thanks for commenting man, I might just keep e'm red!

You seem like a nice,cool guy...I’ll send you something soon enough! You should get some Hand up gloves and 5/10 shoes...love them both!!! 😀

@WOLFTICKVIDEOS

4 жыл бұрын

Dude!!! Looking forward to it Jason. Ill do you proud brother, thanks again!

I love all the loud colors man looks great. That baby blue GT is such a solid color as well

@WOLFTICKVIDEOS

3 жыл бұрын

Haha when we got the red crankset we were going to paint them and then they grew on us. Thanks man!

Great video Jeremiah ! I bought two Maxxis ardent tires 27.5 x 2.4 for my Gt and Now I’m watching this video saying wow that looks great so I think I’ll look into a new crank set in the near future thanks again man for all you do

@WOLFTICKVIDEOS

4 жыл бұрын

No problem at all dude, im glad you got some sweet rubber! In the future let me know how they stick. Thank you so much for commenting and viewing man!!!againlol

@freddiea8895

4 жыл бұрын

Added Maxxis ikon for speed tires are awesome

@WOLFTICKVIDEOS

4 жыл бұрын

@freddie A man just got some Goodyear tires gonna do a review and update on in the same video! and may or may have not picked up some Maxxis's!

I thought I saw the wrong video. From the start of the video, it's like the wizard Gandalf talking to his fellow Hobbits.

@WOLFTICKVIDEOS

3 жыл бұрын

😂Welcome to Wolftick Videos🤣

I reviewed these on my page and they so far have held up great.

@WOLFTICKVIDEOS

4 жыл бұрын

Cool man I watched the video, thanks for the update:) Hope i get some life out of them as well, hope on putting some on other bikes if thats the case

Hope your finger heals. Love the 'real world' install in this vid, fraught with the usual oops'es, injuries and 'which ways.' I fitted my IXF (red also) with the chain ring on the inside as well. Only comment I have about this product is that no two weights of any crank arm pairs are identical; I've purchased four. They range from 643 g (silver) to 696 g (gold).

@WOLFTICKVIDEOS

4 жыл бұрын

Well thanks man! Love to try and show people what to expectLOL But thank you very much and I now have a scale and need to weigh everything like you! Ha Ha Bill hope you stick around a while man:)

Purple for the crank! :) Recently had to remove a steel without spider cassette off an Aluminum light weight hub. After the normal chain whip, the rivets holding cassette together had to be drilled out (the cogs had sunk in at different depths. Then remove freewheel with cassette on, place upwards on two peices of wood, and hammer the top of the freehub with another peice of wood to remove cog. Turns out the plastic spacers were also melted a bit too. After a little gap was made, each cog had to be pried off with a flat head screwdriver.

@WOLFTICKVIDEOS

2 жыл бұрын

OH MY GOD!! I can totally see myself tearing into a cassette like that too!!🤣🤣 Thanks for the story and input brother.

Love the content guys :) you guys are always talking shit to each other which is hilarious and then all the sweet sweet upgrades u put on :) I mess around with my bike like that too. Very cool

@WOLFTICKVIDEOS

3 жыл бұрын

Well thanks Grudzien, its a working relationship between father and son and most of the time we do not get along!!!!LOL But glad you appreciate that, oh and the upgrades too😁😁😁

@grudzien9784

3 жыл бұрын

@@WOLFTICKVIDEOS absolutely:) I will make sure to talk to my buddies about your channel and get everyone to subscribe! I think what you’re doing is awesome and I wish u guys the best of luck. Thanks for the awesome content. Later

Awesome vid thanks I’m going to buy this Crankset for my mtb 27.5

@WOLFTICKVIDEOS

3 жыл бұрын

Right on man! Its a very smooth conversion, hope it goes well for ya:) And also hope you use the link;);) Thanks for watching man

You guys really need a sitcom

@WOLFTICKVIDEOS

3 жыл бұрын

Would you watch it hahaha? Thanks man🙏👍😎

Hint of red cause it matches the lockout on the shocks 👍🏻

@WOLFTICKVIDEOS

4 жыл бұрын

Yeah, yeah, I can see that, good thinking. Hmmmmm...

I used a C clamp to install my lower headset on my Schwinn Al Comp, and use it for other headsets, I also use Electrical tape for the chain slap....LOL... ( don't try this at home)... You and your dad make me laugh specially when Wolf is ranting about stuff . lol Keep it up!

@WOLFTICKVIDEOS

3 жыл бұрын

Lol that's great creativity man!! Ha ha I love it sounds WOLFTICK THRU and THRU😂🤣🤣💯 Appreciate the love and see you around man!!

Hi my name is Jhayz from toronto i really love watching ur video i learn a lot.. i have same gt aggressor you have and i upgrade my crank on same color that you have red.. I had a really bad day on taking out the old crankset that is square i have to use my electric cutter to cut the arms just to take it out.. its worth it on all the hard job that i did thanks to ur video hope u have a lot of video to come for gt aggressor... God bless always and safe ride....

@WOLFTICKVIDEOS

3 жыл бұрын

Well Joseph we know all about struggling to get the old crankset and bb off🤣. I'm glad you found us don't be a stranger man. We have a whole playlist for the GT you might want to check out.

nice vid my man !! you earned my subscription

@WOLFTICKVIDEOS

3 жыл бұрын

Hey man we appreciate that👍. Welcome to the #wolfticknation 🥰😂

Always the best introduction videos ever. 💀😂😂

@WOLFTICKVIDEOS

4 жыл бұрын

Thats what im talking about!!! Makes us feel good about going through all that footage we film and hope theres something LOL thanks alot brother!

Nice look in your bike, I have it in the same way you installed chainring behind the crank pedals, I have the same brand but mine are purple and to give a little match I bought the handlebar stem in purple also. Nice video my friend , keep them coming 👏👏

@WOLFTICKVIDEOS

4 жыл бұрын

Good to know man. I was wondering you told me that the "pedals didnt match the purple", and i was thinking what purple?lol That explains it! Thanks alot brother i appreciate you man.

@magnum.357mtb5

4 жыл бұрын

@@WOLFTICKVIDEOS anytime my friend

Y’all are a hoot. !!Now back to the cranks.

@WOLFTICKVIDEOS

4 жыл бұрын

Appreciate that Burke, never planned on recording our encounters but ever since we have had our channel, we just hit record and go about our day. Glad you like the openers I know alot of people do and dont.

Great job man have the same bike upgrading mine as well

@WOLFTICKVIDEOS

4 жыл бұрын

Cool man! Glad to hear another GT rider well man hope you have subbed and continue to watch for more aggressor videos!!!

Loving the videos man🤙🏼 Hot springs real soon!!

@WOLFTICKVIDEOS

4 жыл бұрын

For sure man! Glad you are watching and hope to hit Hot Springs up soon. You busy this weekend?Might otta take a trip saturday! Let me know man

@tb23

4 жыл бұрын

WOLFTICK VIDEOS dude I’m down for Saturday! I’ll give you a call this evening

@WOLFTICKVIDEOS

4 жыл бұрын

WWWOOOOOHOOOOOO!!!!! SEND IT SON!!! IMMA LEARN YA

Definitely going to have to get these for my 2017 aggressor

@WOLFTICKVIDEOS

4 жыл бұрын

Heck yeah man at that price! I'm heading to try them out now! That and my new derailleur, thanks for the comment man!

Keep up the good work!!! 🤙

@WOLFTICKVIDEOS

4 жыл бұрын

Hell yeah man gotta get that stuff in the mail coming sooner than late!

Yeah I just ordered this... the links you posted in the other video didn't work I got the blue for my grey and blue GT (same bike) don't see you posted an update but I still see it still on the bike... so It can't be that bad thx for being real dude and taking ur time... coffee beer coming ur way 🍻

@WOLFTICKVIDEOS

2 жыл бұрын

Awesome to hear Rj-sent you some affiliate links on the last comment. Thanks for the heads up and good luck;) Also we have 5?? Or so updates on the GT, be sure to check them out in order, LATER MAN!! IXF CRANKSET- amzn.to/3mRIOx5 RISK 34-34MM HEADSET- amzn.to/3v73TYc

@rjbee8533

2 жыл бұрын

@@WOLFTICKVIDEOS I don't know maybe it's my phone I had no problem opening the ebay link and this looks like a good package deal but the links aren't working... Idk 🤔 and I've seen the update on the bike at least one or two videos I haven't heard anything about the crank being bad from this set

@WOLFTICKVIDEOS

2 жыл бұрын

Hmm....Maybe the user;) Now the IXF has been solid man, its nice

Hey man...love the videos!!! I got a few hardtail bikes too...I have a 2019 Giant talon 1 and a GT aggressor comp! 😁👍👍

@WOLFTICKVIDEOS

4 жыл бұрын

Nice man! You ever wanna sell that comp let me know I need another project bike!lol Thanks for watching man and hope you get something out of it, if you havent subbed be sure to please! Be safe and ride on man:)

@jasonkennethshonwise3850

4 жыл бұрын

Lmao nahhh it’s my new project lol...it’s pretty nice bike...I got in the satin black.

@WOLFTICKVIDEOS

4 жыл бұрын

Sweeeet! Im jealous man, looking for my next as well!LOL:)

That is my favorite of all your bikes .

@WOLFTICKVIDEOS

Жыл бұрын

It's a good one man, the bike that built the channel 🤣🤣🤣

That's a cool tutorial dude! Iam changing my crankset for the third time now and I just bought a ZTTO SLR2, I just wait to recieve in few days. I'm going to upgrade my 3/9 crankset to a 1/11, I think it's gonna be cool! And by the way, I used a blowtorch for my crankset's bearing ;)

@WOLFTICKVIDEOS

3 жыл бұрын

Dude that sounds like a great build!! Thanks for checking us out and we will check yours out as well:) Very interesting on the BLOWTORCH!!!!LOL Very cool as well man thanks for sharing ha ha ha😂😂😂😂 Let us know how it goes brother:)

@willmountainbike8362

3 жыл бұрын

@@WOLFTICKVIDEOS I will make a video when I recieve my Gear. You can even check other video on my channel where I rebuild entire bikes if you want. 😉

@WOLFTICKVIDEOS

3 жыл бұрын

Sounds good man!Will do, thanks man

Arrow is supposed to be lined up with the crank arm on the oval

@WOLFTICKVIDEOS

4 жыл бұрын

OK ok. I just got that in the comments and asked where its supposed to go so thank you!And of course completely bassackwards

@anthonys.6462

4 жыл бұрын

So is the arrow supposed to be parallel to the crank arm? I just got this set up in the mail all black. Am going to try and do it myself. Hopefully I get it done correctly. Thanks for posting all your videos. It’s made me consider them for my GT aggressor pro as well!

@WOLFTICKVIDEOS

4 жыл бұрын

Hey man did you ever get stuff answered? Sorry man you just showed up and it shows 3 weeks ago? But to answer your question the arrow is supposed to be parallel with the crank arm. Glad you got the same bike and glad our videos are giving you the upgrade bug! Hope all is well brother and again sorry to respond so late late:( love the name by the way

@anthonys.6462

4 жыл бұрын

Yes, that’s what I ended up doing at the end. Paired it with the same crank arms and a 11-46t sunrace 10 speed cassette and shimano deore derailleur feels like a new bike!

@anthonys.6462

4 жыл бұрын

But you’ve been doing all the leg work and discovering all the measurements. I’ve sort of just been following your build to par but trying to keep it all black. I’d love to send in a photo of it once it’s all done. Maybe you can feature it on your channel? I’ve seen a few other bike channels feature follower submissions. Might be something cool to add to your videos !

Just ordered to change out my old square taper still gotta get the proper tools hopefully it goes smoothly

@WOLFTICKVIDEOS

2 жыл бұрын

"PROPER" is the key!! HA HA GOOD LUCK!

I used a tool for removing plastic caps in cars to remove a crank arm. You should put in a spacer on the drive side of your bottom bracket it just gives a small amount of clearance and it gives you a better chain line. On the chainring, I don't think it should matter just set it the way it feels comfortable.

@WOLFTICKVIDEOS

4 жыл бұрын

For sure brother and thanks for the comment! A clip tool huh? I got a budget tool video coming out Friday I hope you watch, some pretty cheap good stuff. Got some good buys from harbor freight speaking of cars tools. But I tried to add a spacer and it made a funny sound, right after i did the video as a matter of fact. Then took her out and very clicky sound from the back, i removed then very quiet. So I think i will leave it for now , but thanks for looking out :)brother

i think it to buy this for my new ns bikes bike wich now i made up ,did this crankset will be good for dirt jump or hard drive ?

Haha I use a strap wrench to put my bottom bracket on .just food for thought I would leave one spacer on the drive side I noticed there was a bit of a chain alignment issue with my bike

@djayekco

4 жыл бұрын

This video was a thousand laughs.

@WOLFTICKVIDEOS

4 жыл бұрын

Damb and i thought i was country!HA HA And as far as the bb goes its ok to have space between the inner pipe thing?Please explain

@djayekco

4 жыл бұрын

Are you asking if ok to have space between the bb shell the bb .if that's what you mean then it fine it's just mm my friend Or maybe I'm not understanding your question.

@WOLFTICKVIDEOS

4 жыл бұрын

The inner shell that sits between and inside the big bearings. Its ok if the inner piece is not completely equal? picture this 0=0 compared to this 0I=0.Does that make sense? lol We may just have to go on a conference call!:)

@djayekco

4 жыл бұрын

Does a 🐻 shit in the woods . That's fine . That plastic tube is only serves the purpose of keep out moisture and debris but I feel as long as you have enough Grease you should have no worries 😁

If I do this upgraded crank arm do I need to change out the original cassette?

Hello.. question. I have the same Gt aggressor pro. so when you changed the cranks and went from 175mm crank arm to 170mm did you notice the difference? I'm thinking of upgrading cranks.. thanks for your time

@WOLFTICKVIDEOS

4 жыл бұрын

Hey man well get this, I thought GT's crankarms were 170mm and i went to measure them side by side with my old 170mm crankarms and guess what? The GT's are actually about 1/4 inch shorter! So to answer your question not that big of a change up. Couldent feel it at all.LOL

I got this chainset in China (cheap here) because my heavy square taper oem chainset on a cheap bike gave up. The left crank arm was bent. It took two rides and about 25km to "straighten" it 😂 Approx 600km of road/commuting later, with nothing bigger than jumping off kerbs, the bearings in the bottom bracket are starting to make little clicking sounds. I'd say it was value for money compared to the cost of Shimano back home in the West. And I'd also not want to be leaving the ground off road unless I was the weight of an xc whippet.

@WOLFTICKVIDEOS

3 жыл бұрын

For sure man, glad you gave it a chance and its worth the money, mine has been flawless so far and it is def cheaper than the alternative cranksets, well as far as hollow goes. Thanks for commenting and watching man, stay safe in CHINA

Hi, my bottom bracket is clicking alot.. and im guessing it will need replacing.. are these new bottom brackets better than the square one that it comes with? becuase i am having a hard time finding the right size and was thinking of just getting the new type..

@WOLFTICKVIDEOS

2 жыл бұрын

Will def have to be replaced, the newer style is a lot lighter and usually lasts a while when it comes to the bearings.People do not like the square tapered cranks because they usually strip out...Here is an affiliate link and hope it helps!! Good Luck and thank you for watching- amzn.to/3mfIkBQ

I'm looking at these cranks with a 32t to replace my factory 28t 1X10. Will I need to lengthen the chain to go up 4 teeth in the front ?

@WOLFTICKVIDEOS

3 жыл бұрын

Most likely yes, but if it were me I would that minimal of a tooth count I would get an oval and see of you can get away with that. Good luck man and let us know how it goes, I am curious!

Were you get the bottom hollow bracket at? What brand is it? My tapered bracket sucks crank arm keeps falling off . It’s all jack up

@WOLFTICKVIDEOS

4 жыл бұрын

There should be a link in the description. I think the option of the crankset with the BB sold out, but thats how I got mine is with the set. Make sure that it all comes together if you order them. Let me know what you find and I will try to help if you need it.

So what was the consensus on how the chain ring should be I bought an oval one as well and curious which way is best...

@WOLFTICKVIDEOS

3 жыл бұрын

LOL the CONSENSUS IS IN!! The chainring has a small arrow showing were to align it on the spider:) But long side with parrallel with the crankarm.

Hope they last looong distancies.. have fun!

@WOLFTICKVIDEOS

4 жыл бұрын

Hey me too man! Thank and wish me luck ha ha, you will find out i know.

used a can opener to tighten a seat once hahahaha....I think I need a new crank on my bike it's starting to make some wicked noises on the hills....

@WOLFTICKVIDEOS

4 жыл бұрын

😂😆Now how in the world did you do that???? Can Opener! HA, and for the crankset OUCH! Gotta get you something built one day these days especially with that sweet little bit your work throws in $$$

@wolftick what pedals are on this bike in the video, are the neon green or yellow, i want to put them on my huffy scout that has the neon green brake calipers

@WOLFTICKVIDEOS

Жыл бұрын

Here you go brother, good luck and sorry it took so long to answer!!! Affiliate Link amzn.to/3PN1r3w

I just installed those last weekend in black, I love the way my GT feels now vs the 3x. Red looks good but maybe I’d do black or light blue flat pedals.

@WOLFTICKVIDEOS

4 жыл бұрын

Now that idea I like! But it kinda looks like a mess and it almost works. Probably will paint them, thanks for the thought man!

@jasonkennethshonwise3850

4 жыл бұрын

FordRacerForever Yup...just get some nice black crankbrothers stamp 1 flat pedals...there a decent price and look sharp!!! 😁👍

@WOLFTICKVIDEOS

4 жыл бұрын

Hell yeah all sonds good!

@MrForegrounds

4 жыл бұрын

Did you have any problems on the 8th gear?

@WOLFTICKVIDEOS

4 жыл бұрын

Well I didnt get a chance to run it with the 8spd. Planned on it but waiting on parts got me!lol So i can tell you I had problems after i upgraded to a 10 spd on the 10th gear with a spacer. So now i have removed the spacer and have not had a chance to ride yet. I think you will be fine with the 8. Thanks for the question and hope it was helpful. Watch the latest video if you havent already to see what im talking about. 159.00 budget drivetrain test.

Is there any chance to replace that bottom bracket with original Shimano Hollowtech II? Are they the same or is that crankset compatible only with their own bottom bracket? thanks! Also, can i use hollowtech || wrench to tighten bb?

@WOLFTICKVIDEOS

3 жыл бұрын

I would say it would fit, I am pretty sure it is compatible. It would be a risk I would take. Now as far as the wrench it looks like the same exact one?? :) I would go for it man, but I have never had it before. Good luck and I know the sram is the same as an IXF

What’s up guys! Love the vids, specially cause I ride the same bike lol would you happen to know the size specifications of the bottom bracket? I’ve looked everywhere to no luck. Keep up the great work 🤘🏼

@WOLFTICKVIDEOS

3 жыл бұрын

Hey Jonathan the BB is a 68-73mm and its right at 122.5mm anything 68-73 will fit and if you are looking at the IXF then it does come with spacers to make up for the alignment. (atleast the one we have an affiliate link to) Hope this helps man and good luck!!

I know you've updated since (been browsing through lots of your vids and they are awesome) but were you pairing this with the stock rear cassette and derailleur in this video? I'm getting ready to do this upgrade but probably won't upgrade anything at the back until next season. I'm curious of what chain legnth adjustments you had to do if any with this crankset. Thanks!

@DanDiMaggio

2 жыл бұрын

welp I guess I posted too soon lol. Just got to the end where you mentioned about the new derailleur.

@WOLFTICKVIDEOS

2 жыл бұрын

HA HA!! Thanks for doing a little more digging man:) If you plan on running this with your stock setup, it will not be a problem. Checkout one of our drivetrain videos were we shorten chains to fit:) You will need to but, lets see...Hang the chain around your chainring and around your biggest cog on the cassette, no derailleur. Then touch link to link, count 4 links down and BAM!! Oh and be sure to get some tools and a 8spd masterlink! Good Luck AFFILIATE LINKS CHAIN PLIERS-amzn.to/372Dik8 CHAIN BREAKER TOOL-amzn.to/3dLmNNo MASTER LINK-amzn.to/3p7MWIs CRANKSET TOOLS-amzn.to/3j6jDWW

Your dad is so funny in the beginning of the video

@WOLFTICKVIDEOS

3 жыл бұрын

He is a mess man!!!

Is that RTV on the lower chain guide to protect from chain slap?

@WOLFTICKVIDEOS

3 жыл бұрын

Silicone stuff? No brother that is eurathane, its a windshield soft adhesive. But yes it is for chainslap. Does very well

Hey brother love your channel and have learned a lot in a short time from you. To say the least.lol I have a question for you and I'm sorry to bother ya cause I reckon ppl are asking ya them all day. Anyway, I have the ixf crankset like you. Have had them for 6 months now n no problems til now.lol I took them apart tonight to check my bearings out and now I have these 2 bushing type things n have no idea where they go. I'll try n send a pic of them if I can. Any help would bw so appreciated buddy and Thank you!! Keep them videos coming n safe riding. Right On.

@WOLFTICKVIDEOS

2 жыл бұрын

Sounds good man, thank you for watching and hopefully we can get your question answered, the only bushing style things I can think of are like almost bronze style pieces that go over the shaft outside the bearings, but I could be wrong...

Ik wil deze ook gaan bestellen wat is de ervaring van u kant slijt het snel en blijft de ketting er mooi op zitten onder het fietsen

@WOLFTICKVIDEOS

3 жыл бұрын

Ervaring tot nu toe? Ik vind het geweldig en voor de prijs kun je niet fout gaan. De lagers zijn geweldig en het is heel gemakkelijk te onderhouden. Bedankt voor het kijken !!

Hello there , I just bought my bike today already going to do some upgrades, I want the 1/x drive. I went through the comments to find a link to the product ebay link was broken but I found one on Amazon, but my question is about the oval ring, are the hole spacing the same and can I run stock chain with the oval ring ? , sorry I'm new to the cycling world , and where I bought the bike I was explicitly told not to modify the bike in any way

@WOLFTICKVIDEOS

2 жыл бұрын

Hey brother, thank you for letting is know the links are dead. We will fix that, now regarding the chain, it will work with an oval without issue. Just make sure to size the chain. We have a video on that 😉

hi how is the IXF crank and the bottom bracket is it still holding since May 2020? I am about to get one too thank you

@WOLFTICKVIDEOS

3 жыл бұрын

Hey brother, the IXF and all its parts are still alive and kicking!! LOL Its a great set that I have not serviced since we installed them. Thank you!

Good video man I have a GT Aggressor Pro and I want to change de crankset but I read is not easy at all to take off the old one and I don’t have the tools either. How much it cost in a shop to do that? Or you recommend to me buy the tools and do it my my self? Thanks

@WOLFTICKVIDEOS

3 жыл бұрын

Hey thanks alot Fidel, the GT is a great bike of ours and happy we can share it man!!!:) It is difficult to take off and you may look at a a bike shop doing it for you, that way you can hold them accountable if something is to go wrong. Wouldent think it would be over $20??? But really no clue on that brother. Thanks for watching and hope you can get it done!!!Good luck

craziest thing i used to take the main front crank and chainring off was yesterday, cutoff disc on my angle grinder, it was super seized up.

@WOLFTICKVIDEOS

3 жыл бұрын

LOL!!! Dude I totally did that with the Temissor!! HA HA Thanks

Before i have used for one year Chinese crankset named Goldix, for about 5k km it was fine and then arm broken. Now I have found many good reviews about IXF crank and decided to try, maybe it will be stronger. I made weight comparision to old Goldix broken crank when IXF crank arrived and IXF crank seems to be stronger, arm is a little thicker. One IXF crank weight about 250 grams and Goldix arm is 210 grams or something like that so i'm happy that IXF has more material so it might be stronger. I will see how IXF works with time. Here you can see video of Chinese Goldix crank broken, my weight is about 70 kg and it looks like it broken with fatigue, i noticed on second arm that wasn't broken yet a crack in the same place where another arm broken so it wasn't problem with one arm only and after some time second arm would be broken too, Goldix crank is just too weak. I hope IXF will be better --> kzread.info/dash/bejne/eIKG0KilhpXHl7Q.html

I got the same ones but I got plastic spacers do I have to use them

@WOLFTICKVIDEOS

2 жыл бұрын

Man you don't have to, but make sure your chainring is aligned with the middle of your cassette. So if you got an 8 speed chain should be pretty straight inline in 4th gear. If not add a spacer.

Hey man my bike has shimano crank but I want to put a single one ifx it fits in my bike

@WOLFTICKVIDEOS

3 жыл бұрын

Hey brother the IXF is very universal, so chances are it will fit with ease....But if not let us know and maybe we will buy it from you if it doesnt fit:) lol

Does the ixf crankset come with the bottom bracket and will it fit my GT Pro Aggressor

@WOLFTICKVIDEOS

3 жыл бұрын

Yes and should! Good luck and checkout the affiliate link please:) It fit mine and still use it today:)

nice video bro, so inspiring. I just bought a GT agressor comp while watching your videos I don't even have idea we can do some budget upgrades, I try to go to a bike shop and ask how much does it cost for a conversion to a 1 x drivetrain but just telling me theres no need to do it coz it cost almost the same price of the bike, hehehe.

@WOLFTICKVIDEOS

4 жыл бұрын

Well man glad you found us! We are all about trying to find that diamond in the rough! Thanks for the comment and hope you continue to watch

Hey guy I work in a bike shop and recently we have had to use a blow torch to melt out the bb style square taper bottom brackets with plastic cups as they get stripped out also we had to do it after a customer went at one with a chisel

@WOLFTICKVIDEOS

2 жыл бұрын

LOL!!! Man I bet you could tell some storys!!!! Thanks for watching and commenting brother:)

Everyone should have a Frankenstein bike in their garage.

@WOLFTICKVIDEOS

2 жыл бұрын

We AGREE!! LOL 😆

I used a piece if cardboard with an adjustable wrench to tighten a race face bb because of course I didn’t have the right size bb tool! I mean even Seth did it in one of his videos!

@WOLFTICKVIDEOS

4 жыл бұрын

Dude thats a great ideaLOL. When you dont got the stuff make do!

@samfisher930

4 жыл бұрын

It’s look good keep it red

@WOLFTICKVIDEOS

4 жыл бұрын

Ehhh? I might lets see what the total is after a while so far black. Thanks for the opinion man, red isnt so bad?lol

I think you should paint them black and I think that the way you have the chairing is correct. The craziest thing I’ve done to my bike is probably is my stock crank fell off so I just bashed it back on with a rock.

@WOLFTICKVIDEOS

4 жыл бұрын

LOL! Same here man the woods were loud that day. I think I otta go with black as well maybe a matte. I dont know lets see what everyone else says. Oh and im with you on the chainring brother, you wouldent believe the amount of comments it has stirred up, maybe were wrong?

Watching this at the end of August, 2020, but have used a 4" cordless grinder with a cutoff wheel to remove some cranks, after stripping the threads on the crankarms removing them from a square taper BB...

@WOLFTICKVIDEOS

4 жыл бұрын

Ouch!!!! Just went through this back and forth with a guy who did the exact same thing!!!! LOL Thnaks man for the comment no matter how late we still appreciate it!!

Well I’ve used a red a pipe wrench to remove a cassette from a HG Shimano free hub 🤷‍♂️. Through past experience & A lot of Aggro. I’d like to think Im a little bit older & a bit Wiser now, probably the best thing to do is to get the right tool for the job. It just makes life easier. I’ve got an IXF crankset on my bike too & up until now I’ve had No problems . I placed a spacer on the drive side because the bottom bracket if it’s 73 mm it will need a spacer , I also put the chain ring on the INSIDE of the crank set that’s where it goes.I can say that I’m happy with it for commuting but I probably wouldn’t recommend it for doing any Gnarly jumps with it. Anyways cheers for upload & stay safe.

@WOLFTICKVIDEOS

4 жыл бұрын

Hey thanks for the comments man, and a pipe wrench? What you think your me lol. I am hoping to hit that WISE stage someday instead of being frantic and scrambling for who knows what!LOL I just took my spacer off i think it will ride better and align better? Ill find out i guess and its been great so far man glad you watched and glad yours is holdin up. If you havent already checkout the 1x10 drivetrain video the XT derailleur and crankset do wonders you will dig it! Thanks again Andrew and hope to be hearing form you soon:)

@Andrew-dm8mk

4 жыл бұрын

WOLFTICK VIDEOS I’ve upgraded recently to a Shimano XT M8000 rear mech plus the XT 11 speed right shift lever. I went a bit more budget friendly on the cassette & installed a Sun Race CSMX8 11-46. I’ve had to completely replaced my sr suntour xct forks , I commute a lot to work & back so the winter plays havoc due to the roads being Salt gritted, the upper forks had totally rusted & pitted away , I ended up buying some Rockshox Recon silver Tk air 100 mm travel @ $200 Ouch!! but needs must they are AWSOME forks compared to the sr suntour’s . Mind you I’ve had the bike 5 years now so I’m having to invest to keep her going. That’s a nice GT Aggressor you’ve got they are Good bikes Anyways have a good one 👍🏴󠁧󠁢󠁳󠁣󠁴󠁿.

@WOLFTICKVIDEOS

4 жыл бұрын

Man that's crazy to know that your riding in weather that requires salt on the roads. I don't ride if it drops below 50 degrees lol. I got a new fork coming soon so make sure you watch for that and let me know what you think. Take care brother.

@Andrew-dm8mk

4 жыл бұрын

WOLFTICK VIDEOS will do 👍 Thanks stay safe

@WOLFTICKVIDEOS

4 жыл бұрын

Cool man and you as well!

Awesome bike and very helpful videos man. I have the same bike and I am following your upgrade path myself. Could you please share what bottom bracket do I need to get for our bike? I understand it is a 73x122.5mm based on what you said on an earlier video. I am just not sure what type or style do we have. Thank you very much for the help!

@WOLFTICKVIDEOS

4 жыл бұрын

yeah for sure man you want a measurment of 104 bcd. Thats pretty universal so it shouldent be hard to find. Thank you very much for watching our videos man. Heres a link this comes with everything including the chainring!!! I would go with this for sure. Thanks again man and if you ever have any questions please let me know. rover.ebay.com/rover/1/711-53200-19255-0/1?ff3=4&pub=5575588353&toolid=10001&campid=5338684594&customid=Crankset&mpre=https%3A%2F%2Fwww.ebay.com%2Fitm%2FBMX-Bike-IXF-Crankset-crank-arm-170mm-BB-Narrow-Wide-Round-32T-Chainring%2F114236773436%3Fhash%3Ditem1a990ad43c%3Am%3AmaL6J5bmxg1VrSb2PJQctSg

@colinfruend5537

4 жыл бұрын

@@WOLFTICKVIDEOS I'm about to make the switch from taper to that IXF set up on my Pantera. My only concern is that I'm an aggressive rider and I dont know how well it will take the abuse.

@WOLFTICKVIDEOS

4 жыл бұрын

Yeah brother like I said in the other response, hope it holds up for ya. I would give it a shot. Cheap enough

Did you end up using no spacers , I’m doing the same conversion on my aggressor pro. Thanks

@WOLFTICKVIDEOS

3 жыл бұрын

Yes sir, I ended up putting one on the drive side in the end.

I would think leaving the spacers in if it works would add more stability spreading the bearings out further and less twisting pressure when I pedal ape (chicken noise) up some steep hills.

@WOLFTICKVIDEOS

3 жыл бұрын

😂😂 Very good thinking!! Lol🐔😉😉

did that crankset come with the hollow bracket? I am looking to do the exact same upgrade on my GT Aggressor pro

@WOLFTICKVIDEOS

3 жыл бұрын

Yeas it did, there is also an option to order the chainring as well. Here is an affiliate link brother:https :) //ebay.us/BUTJWH

Hi ,thanks for the videos! I been working on my GT 27.5 also doing some upgrades ,I have a question regarding the Crankset IXF , is a 30T or 32 better? I think that i order the 32 do you recommend 30? Thanks so much

@WOLFTICKVIDEOS

Жыл бұрын

Hey brother, 32 will be fine. The 30t will have more climbing power but the 32t will be fine. Thank you for watching👍

@odxc2440

Жыл бұрын

@@WOLFTICKVIDEOS thanks for the immediate response!!💪

Do you know what size pedals you put on the Ixf cranks?

@WOLFTICKVIDEOS

4 жыл бұрын

Thread size is 9/16". Is that what you meant

Hey Wolftick. Been following your page for a long time now. Love seeing notifications for your videos. I was have been running the IXF ever since you posted this video. The bottom bracket occasionally loosens up on me after big jumps. I was wondering if you have had this issue and if so have you found a way to prevent it. Thanks!

@WOLFTICKVIDEOS

3 жыл бұрын

Well first of all thank you for watching when you get notified man, it really helps us out! Now I dont every have this problem, one thing I would do is take it apart and grease it well inside then licktite the threads?? I know you are supposed to add grease but that is what I would try? Especially if it was doing it constantly, either that or add grease to them so it would act as some kind of binder...

Can you provide a link to the wrench you used in the video please?

@WOLFTICKVIDEOS

2 жыл бұрын

BB Wrench (EBAY)ebay.us/CqtOfB (AMAZON)amzn.to/3nqm1cj BB Remover Tool + Crankarm Puller (EBAY)ebay.us/nNaceC (AMAZON)amzn.to/3udxZK9 These are affiliate links brother.

what's the advantage of having an oval chainring? thanks

@WOLFTICKVIDEOS

3 жыл бұрын

Hey brother, now I have ridden both round and oval for a bit now and I can say the oval has way more of a torque feel. When you are climbing with a round and you feel that weird dead pedal spot...well with the oval or simply doesn't happen!! I love mine 👍👍

This video was almost 2 years ago, do you have an update as to the wears and tears. Kinda wished you compared this to raceworks too. I'm looking to get one. And yeah the grease I was using one night I left the lid open, sort of like wide opening can. The next day I was using it, never even notice till I put it on turned from a brown color to greenish. Then my mom told me she saw the cat pee in it.

@WOLFTICKVIDEOS

2 жыл бұрын

Hey brother, 2 years and the ixf is still on the GT. Going strong 💪 if you watch the GT updates video you can find out for the future. We talk about everything, and as for the cat piss we have not had that problem!!!!🤣

I 3D printed a BB wrench for my IXF crankset installation. I already had the filament and figured, why spend 8 bucks for a tool I'll probably only use once? PLA+, worked like a charm. 6:15 I did the exact same thing, except my thumb was in the way and the edge of one of those holes on the inner side of the crank sliced me right open. =/

@WOLFTICKVIDEOS

3 жыл бұрын

awwww man 3d printed!!!!:) Thats way to cool lol. I would be so dangerous with something like that ha ha, I would build me a new bike!!! And man oh man does that suck with getting slit open, my hands I thing have enough wear and tear to sustain most dumb stuff but its always those little things that get you!!:) Later man and thanks for watching

@robertnolan638

Жыл бұрын

Can you share the file for that please?

is there no update video I searched for 30 minutes and can't find it. What size tooth do you recommend and what do I buy? Do i buy chainring + crank+ BB ... bought the handle bars, and stem and fork so far ill be getting them today. I rode today and When ever I do like a bunny hop of something my chain skips for a second so I want to change to the ixf. I also want to buy some maxis tires with the rockshox im getting you told me to buy do you know the size tire I can buy and also a good deal with and affiliate link?

@WOLFTICKVIDEOS

3 жыл бұрын

Hey brother first of all thank you for the Coffee:) We responded with email, now let me find some affiliate links as well. Thank you for using them!! Here is an IXF it comes with a 30T which will be perfect for the 1X so get the Crank-chianring and BB. It is also in the U.S.A IXF Crankset ebay.us/BUTJWH Maxxis Shorty Tires-all Maxxis are expensive and these look like a STEAL!! Good luckand a 2.5 is the widest I would feel comfortable sending someone a link to:) Maxxis Shorty ebay.us/pCQRgh Also you will have t shorten the chain as well:) Here are some tool links to;) ebay.us/rwIv5b

@ThisIsJoeyPops

3 жыл бұрын

@@WOLFTICKVIDEOS I seen you really like the oval. Do they sell the oval with the 3 peice deal if not do you have a link with the oval one.

@WOLFTICKVIDEOS

3 жыл бұрын

Here is an affiliate link to an oval. We can not find one with an IXF crankset that is in America-ebay.us/cWHQvq

Hey jere. How did you like the ixf crankset. I'm thinking of getting one. Any problems?

@WOLFTICKVIDEOS

2 жыл бұрын

I live live brother, please checkout the latest video of the GT Laguna were we install. They are bulletproof and I am a huge fan. Easy to install and you can save some weight 2!

Was your cap missing from drive side or should it not have one

@WOLFTICKVIDEOS

4 жыл бұрын

Ok well I learned some things! Now the (endcap) is actually a insert to put on your non drive side before you tighten the arm to help in setting the bearings. So screw it in, tight, then tighten the arms and remove cap or dont. But its supposed to come out:)

I put an IXF on my 73mm Axum BB this week. The spline is about 8-10mm shorter than it should be. I was not able to use a spacer to put the chain ring where I wanted and the left side was 6mm short of letting the crank arm all the way in. I sent a message to see if I can get one with a longer spline, have not heard back yet. The crank is working, but I want the correct one.

@Mntbkr64

3 жыл бұрын

Correction: spindle

@WOLFTICKVIDEOS

3 жыл бұрын

Man that sounds like a pain in the a**, I understand you want the correct one but do you need a spacer? Hope they get back to you man, if I were you I would email EVERYDAY!! That is the only way we get stuff like that handled these days:)

Usually there is a little blip on the chainring that lines up with the crankarm. You want to be pulling more chain when the arm is at the 3 o'clock position.

@WOLFTICKVIDEOS

3 жыл бұрын

👍👍Thanks for the Input man:) Since then we have found an arrow/blip. Thanks for Looking out Charlie

@charliedevine6869

3 жыл бұрын

@@WOLFTICKVIDEOS I still have a tripple set of BioPace chainrings from my first mountain bike: a 1986 Univega

@WOLFTICKVIDEOS

3 жыл бұрын

JESUS!!! LOL 1986 :) I was not even born YET!!! ha ha "Damn kids, Ive got chainrings older than you!!"

I don’t hate the red cranks on the blue frame, but the pedals throw the color scheme off. Thanks for making these videos man. Love my Aggressor Pro so much that I bought my wife one too AND my daughter a GT Stomper (she’s 11 and has been bitten by the MTB bug). Take care bro.

@WOLFTICKVIDEOS

4 жыл бұрын

Hell yeah man thanks for the comment! And hope yall watch Wolftick Videos together! Just wait for my next bike my dad bought me!Budget Budget Budget its a backup bike should be out soon! Thanks again man stay safe

@keahicambra308

4 жыл бұрын

Can’t wait to see it.

@WOLFTICKVIDEOS

4 жыл бұрын

Cool dude, I can safely say "I CAN!"LOL

my craziest thing was to use my freezer. I pout a hex key in the freezer for few minutes, I put warm water on frame, and undid a bolt, which Trek over tightened, probably Giant cus they manufacturer Trek frames and build them. that thing just would not move, it should have been 10nm, but it probably was past 30 closer to 40 or 50 I guess. probably manual work no machine or torque wrench was used, just crazy torque by hand.

@WOLFTICKVIDEOS

4 жыл бұрын

Wow that sounds lika mess dude! lol Ive done similar stuff at the body shop, good thinking Johannes

hey man, have a GT agressor expert and was thinking of changing the bottom bracket. What is the size and dimensions of the bb you installed!! Thanks

@WOLFTICKVIDEOS

4 жыл бұрын

Hey man checkout the link in the description the whole set is in their if you order just make sure you add the BB for the complete package but the BB is a 68-73 mm english thread.

can you put 2 chainrings on that? to make it 2x

@WOLFTICKVIDEOS

3 жыл бұрын

Hey brother here is an affiliate link, I am not sure but ti looks just like the one I ordered and in fact the same seller. It shows 2 and a 3 chainring setup, not bad but ti looks the exact same good luck!:ebay.us/bmzpSB

where did you get the bottom bracket tool?

@WOLFTICKVIDEOS

3 жыл бұрын

Ebay brother, heres an affiliate link:)ebay.us/N2RK8b

How was the crankset held up, they have bad reviews online

@WOLFTICKVIDEOS

4 жыл бұрын

Well we have nothing but good things to say about the IXF crankset. I abuse the heck out of my cranks jumping and hitting the trails hard, and have never had a problem. Now remember I stand 5'5" tall and weigh 155lbs so if someone was a lot bigger maybe they fail I don't know. So hope this helps let us know if you need more info.

I’ve just down the exact same thing the spacer has pushed out the other side now I can’t get it back in!! What did you do!? 😭 needs to be in cause it’s wobbly otherwise

@WOLFTICKVIDEOS

4 жыл бұрын

LMAO!!!!!! Sorry but you had me in tears with that emoji. I can picture it, wow. But man i wish i could help, really its not that hard to put back in at all, i just picked that thang up off the floor spit on it and vwohla! Grease it up son! Let me know, damb you are hilarious.

@jameshicks498

4 жыл бұрын

WOLFTICK VIDEOS 😂😂😂 it didn’t help that I first put the crank arms on the wrong sides ffs! .... should not of had those beers. Anyway I fixed it/bodged it in the end all good (for now) lol!!

@WOLFTICKVIDEOS

4 жыл бұрын

Appreciate the update man!!!! And drink afterwords, i know i know not as much fun, but holysh** wrong sides ha. You may just have a problem?LOL

I used a screwdriver to socket adapter and a hammer on the rebound caps of my xct fork to service it

@WOLFTICKVIDEOS

4 жыл бұрын

Well now, that sounds like a good o'll budget mtb thing to do!LOL Sounds like something for the future for me.Later bud!

@purplegarage05

4 жыл бұрын

@@WOLFTICKVIDEOS eh sadly it only works for coil air shocks have hex bolts

@WOLFTICKVIDEOS

4 жыл бұрын

well maybe not :)

those yellow pedals are awesome with the red!

@WOLFTICKVIDEOS

3 жыл бұрын

Ha ha I'm glad someone else liked them yellowish pedals with the red crank arms. We were big on it as well, but some did not like it so much haha. Thanks man.

@crocsonletsgo9665

3 жыл бұрын

@@WOLFTICKVIDEOS sometimes you have to break the rules! Haha

@WOLFTICKVIDEOS

3 жыл бұрын

😎