Awesome RC and setup, cool run, have a great weekend brother

@RCKnockout

2 жыл бұрын

Thanks bro! You too!

Nice conversation to electric.

@RCKnockout

2 жыл бұрын

Thanks!

Cool build. At first I was like NO DONT DO IT! But now I'm like I want one so I can rip it in the park where I bash my slash 4x4.

@RCKnockout

2 жыл бұрын

Yeah this was the right way to go with this machine…..I’ve gotten so much more use out of it

@chrisjohnson4733

2 жыл бұрын

It looks like fun. Those 1/5 scale rc look awesome. One day I'll get to a level of control and I'll get one. Right now I'm not ready for it lol.

@RCKnockout

2 жыл бұрын

@@chrisjohnson4733 understandable…..they cost a lot and aren’t the most convenient to haul around either

I love this Red Bull body

@RCKnockout

Жыл бұрын

Thanks!

Cool big truck but 1/10th scale my favourite! They small enough not to break fast enough to be fun cool vid

@RCKnockout

2 жыл бұрын

Thanks! To all their own

Awesome run with your brushless LOSI 5T, I plan to start saving up for a 5T 2.0 and maybe have it by my 25th birthday.

@RCKnockout

Жыл бұрын

Thanks man! That’s a cool plan 😎

@cjchannel12RC

Жыл бұрын

@@RCKnockout You're welcome, i did the math and if i put back 125 bucks for 16 months i could have by August next year or i could keep saving until again my 25th birthday as a gift for myself.

@RCKnockout

Жыл бұрын

@@cjchannel12RC nice!

@cjchannel12RC

9 ай бұрын

@@RCKnockout I can't stop thinking about how cool these trucks are, Do you still have this truck?

@RCKnockout

9 ай бұрын

@@cjchannel12RC yep! I think this one’s a keeper!

5T owner here…been debating on going brushless because I’ve just had enough of trying to get my petrol engines started. Never owned a petrol engines Rc before and in the almost 3 years I’ve owned it, never actually driven it in anger…the few times I have started it, it’s other ppl that have managed to get it going…now just fed up with it, so this vid is really helping me to make my mind up on doing the electric conversion…thing is, I’m from the UK where I fear this may be pricey lol …..did you change your suspension oil at all, as it looks like it’s riding high (compared to other 5Ts that I’ve seen) and yet it seems to ‘belly-flop’ quite hard. Either way, great vid and great run 😎👍🤟

@RCKnockout

2 жыл бұрын

Thanks man! Actually the Top Tuning kit I believe comes from Germany…..it’s pricey though….I still have the stock oil in the shocks….I’m still glad I did the conversion

Love the losi, thanks for the rip stay safe bro

@RCKnockout

2 жыл бұрын

Yeah me too! Thanks bro!

Hi Nolan thanks for sharing man. I am doing my Rampage conversion to. I want to get some better wheels, not sure which ones yet though. Motor mount looks great.

@RCKnockout

2 жыл бұрын

Thanks! Best of luck with your conversion

Awesome Run Nolan I think if your lower arms were plastic that would have fused nicely for you and maybe save you a hinge pin I’m trying to work out what will cost you more at their sizes 😫 not like it’s an 8th scale😒🥲 Nice of you to share

@RCKnockout

2 жыл бұрын

That’s true it would have broken the arm but it wouldn’t have bent the hinge pin…..overall once the insert is replaced it should be all good though

Great rip on 8s when are you going to try 12s lol Stay safe on your travels

@RCKnockout

2 жыл бұрын

Thanks man! I don’t know about 12s……8s seems like plenty lol

Hey man, what did cases are you running on there. Don’t really want to spend $180 on Vitavon

@RCKnockout

8 ай бұрын

The brand is Ice rc I believe

Like the 1/5 scale electric content. I've been watching this kind of stuff lately to motivate myself to get my electric Baja 5B back into service. I managed to get it back on the bench to begin installing some upgrades purchased years ago before taking a break from the hobby! I'm surprised you are running aluminum arms...though I guess you pick your poison, broken arms vs bent pins and mashed inserts. Were you breaking a lot of arms when they were plastic? Yeah, chop that bit off the center diff top plate. It looks nasty and you'll never use it again now that you have that nicer motor mount. I think I would take enough material off to make it a close match to the opposite side...it would just be two small cuts instead of one then you can file it a little to make it look finished. The truck already looks great so that would clean things up nicely.

@RCKnockout

2 жыл бұрын

I built this before I knew what was best for bashing…..so I bought the aluminum arms and always ran it that way…..never actually ran it with the plastic arms…..I should consider switching them over….yeah I might chop that off

@s13kuminachu

2 жыл бұрын

Get that thing outside! I just got my Rovan Brushless from 2014 out. Forgot how huge it is. Going with a Max5 on 8s. It came with a 6s esc back when it was new. Let er rip tater chip!

1:26 you SHOULD chop that off. You dont want it to break and get in the middle of the spur and pinion u kno...:) Stay safe!

@RCKnockout

2 жыл бұрын

I think that would be highly unlikely to happen but I still might chop it off to make it look a bit cleaner

@madhuram2313

2 жыл бұрын

@@RCKnockout i mean, you never know... Altough it will look a lot cleaner if you chop it off anyway.

@RCKnockout

2 жыл бұрын

@@madhuram2313 yeah that would be the main reason I’d do it

Hi hope your well Is there anyway of adjusting the gearmesh if wanting to change pinion or can only one size be used Thanks

@RCKnockout

Жыл бұрын

Yeah you can adjust the gear mesh….the whole motor mount moves

@sufyaankhan232

Жыл бұрын

@@RCKnockout thank you for the quick reply never had someone reply to me yet alone that quick Btw your vids are awesome and you are very informative I have a rovan lt360 and looking to convert to electric Hoping the top tuning kit should be fine for me Any idea on where the esc sits Also could i use my mechanical servo brake with this kit? Thanks once again

@RCKnockout

Жыл бұрын

@@sufyaankhan232 No problem man! Glad you like them! Mines a mismatched kit so my Esc sits above the brake mount which I like Not sure where the top tuning esc mount actually sits 🤔

@sufyaankhan232

Жыл бұрын

@@RCKnockout i reckon behind the motor maybe Im new to the whole 1/5 scale and now will be looking at electric I don’t suppose you have WhatsApp or messenger i could maybe message you on along my journey for any info and help seting esc and motor up

@RCKnockout

Жыл бұрын

@@sufyaankhan232 yeah that’s probably a good guess….no I don’t have either of those

Where can I pick one of those Kit Up at

@RCKnockout

2 жыл бұрын

I’ve seen them on Ebay before

My E kit comes with 16t pinion only but i got a saga 32t to let her fly. Or am i pushing it?🤣12s too

@RCKnockout

Жыл бұрын

12s is a whole other animal! 32t might be pushing it though lol 😂

@Openthrottlerc

Жыл бұрын

@@RCKnockout also got a 29t

@RCKnockout

Жыл бұрын

@@Openthrottlerc that might work better

@Openthrottlerc

Жыл бұрын

@@RCKnockout ill watch temps see what it does

@RCKnockout

Жыл бұрын

@@Openthrottlerc good plan 👍😉

Get on Detroit performance and check out the fonzie engine mount they won't move if them screws are the same size

@RCKnockout

Жыл бұрын

I’ll have to check it out…..thanks!

@wades5thscaleforlife872

Жыл бұрын

@@RCKnockout them mount hold big bore in place they should work fine for yours

@RCKnockout

Жыл бұрын

@@wades5thscaleforlife872 ok thanks!

Christ, my DBXL 2 Brushless would of smoked this on 8s

shame you cant buy the conversion parts separately

@RCKnockout

2 жыл бұрын

Yeah it is…..but it makes sense from the companies standpoint

@will_z

2 жыл бұрын

@@RCKnockout StupidRC live in my neighborhood in Brazil

@mikellewis2346

Жыл бұрын

You can find a few companies selling 5t electric part's. I've got part's like these in this video and that guy sold anything u wanted to convert the 5t. Even had motors and esc.

That was my buddy's it is new

@RCKnockout

2 жыл бұрын

The kit?

@nickhathaway4617

2 жыл бұрын

@@RCKnockout yes The motor mount and the battery tray

@RCKnockout

2 жыл бұрын

@@nickhathaway4617 oh nice!

Using aluminum suspension arms destroys the ability of this size truck to absorb impacts. The aluminum should only be used for display purposes, or smooth tracks where the chance of severe impacts is almost none. Never use aluminum arms for bashing. You will break things more often and spend more money.

@RCKnockout

2 жыл бұрын

Yeah I realize that

Car