Looks good but the details on the face of the woman are basically invisible ( talking about those cheek lines ) why is that? Those lines seem dark enough to be read by the printer yet they don't appear on the stencil
@ZaCrow
9 ай бұрын
I didn’t make the stencil dark enough in the app. And also you can edit it in the photo app of the ipad to put the brilliance at 100% and it should have no problem printing them😊
@eduki Жыл бұрын
Can you also print shadows and not only the outlining? I think that I read that this model is able to differentiate tones and shadows and print them, so if you prefer to have them on the stencil, as for example doing realism, this can be useful
@ZaCrow
Жыл бұрын
It doesn’t do a good job with shadows. I wouldn’t recommend it for that.
@patraulea84 Жыл бұрын
Uitandu-ma la clip am realizat ca esti Roman,printre pozele din galerie era Mihai viteazul,Decebal😂😂✌️
@ZaCrow
Жыл бұрын
da sunt roman:)
@bogdanciobanu2136
8 ай бұрын
Dupa accent, acronim... 😊
@kur0yurei2 жыл бұрын
I recently got the brother pj 723 and have issues with printing the stencil paper. in the process of printing the paper gets stuck and the little printer sucks in the paper from both ends. any tips of how to fix it? unfortunately I cannot find anything useful on the web. have been trying various things like re-installing, updating, adjusting the paper. just SOMETIMES it seems to work perfectly.
@ZaCrow
2 жыл бұрын
Ajust the density if it gets stuck set it to 6 or 7 and dont print before you put the paper in !
@BrunoVenedig
4 ай бұрын
i got the same problems. i got the pj 623 and its printed the stencil slow but without rolling the paper off. my new one pj723 prits so much faster than the older on. the new one had an akku. my old 623 rc cabel. could be this problem?
@eyygurke6081 Жыл бұрын
One of the most affordable wireless printers
@durgagurung7946 Жыл бұрын
What tech is use inside the printer for print?! I bought hprt mt800q said thermal too but does not works on stencil paper..only print on a4 paper. No use for tattoo. It has cartridge ribbon in it. So.. What is in brother printer?! Do you need to change after a certain period of time?!
@ZaCrow
Жыл бұрын
All i know it’s based on heat ! It heats up the part of the stencil only where the drawing is.. it has no cartridges.. you don’t need to change anything in it ! If you take good care of it it works for life
@icusmarkavelly1372 Жыл бұрын
Watching this amazing video on my iPad Pro 12.9 just like yours, awesome job 🎉
@jessyysm2 жыл бұрын
hello, I'm not able to print with my brother pj763mfi through ipad. can you help me?
@ZaCrow
2 жыл бұрын
if you have it connected to your iphone or other device you need to disconnect it from it so you can connect it to another..hope this is useful
@troibeach Жыл бұрын
i have one with a battery and it lasts pretty damn long, it usually turns off on its own after no use
@Timmy45182 жыл бұрын
Hi! Assuming it is fully charged and that you haven't printed yet, how long does the printer stay on for when not connected to wall power?
@ZaCrow
2 жыл бұрын
I don’t have a battery on mine because there sold separately and they are like 100£ ! I don’t really need one 🙂
@user-do3jd4hy5j Жыл бұрын
Is it copied only by Usb communication? Is it not possible to make a copy of the print method of printing?
@kadenhargett562 Жыл бұрын
I'm trying to be a self taught tattoo artist so this honestly goes a long way for me thank you so much and if you ever see this comment I'd like to pick your brain a little bit about some of the things you had to do before you become a tattoo artist. If you're willing ofc.
@Tony-df5rs
Жыл бұрын
Get an apprenticeship.
@Natyguis8 ай бұрын
Hello … what’s it the app ??? thanks
@ZaCrow
8 ай бұрын
pencil sketch pro...and you can also get Tattoo stencil app on IOS :)
@p.s.54162 жыл бұрын
I’m having trouble connecting to Bluetooth on my iPhone and iPad with a pj-763. It’s not showing up.
@ZaCrow
2 жыл бұрын
try to watch paul talbot`s videos about the printers ,,he knows all the information about them ..idk what to say sorry
@DanielCastillo-vg6xy
2 жыл бұрын
i’m having the same issue! did you ever figure it out?
@hateFM
2 жыл бұрын
763 isn't compatible with iOS. It is only for PC, OS, and Android.
@lilithdablo51529 ай бұрын
We bought such a printer and it doesn't work properly. The paper gets stacked there and it just doesn't go and the printer jawing it. What should we do?
@ZaCrow
9 ай бұрын
if it gets stuuck lower your density .. and don`t try to print shadows or large patches of black. i recommend using the tattoo stencil app from the app store and filter the designs with the app first before printing them. i will make a follow up video about all the issues that i get asked in the comment section..it will be out in 2 days at the most.. thank you for you`re support
@uman4556
7 ай бұрын
Usually it gets stuck when you put loose layers into the printer. Don't cut the yellow sheet off. Leave around a half inch at the end so it holds the other 2 layers together. That's what helped me.
@ulyssevargas22112 жыл бұрын
Hello thx for your video, i bought 763 moi last days but my stencil looks very lighter, some tinny lines disappear, fat lines too . Do you have the ‘ STENCIL MODE ´ enabled or disabled in the setting panel ? Thnx for your advice 🙏
@ZaCrow
2 жыл бұрын
Make sure your lines are full black in the drawing and than go to settings in the iprint and scan app and put you density all the way up to 10
@Misteralb326 Жыл бұрын
Hello the name of the app pls i couldnt hear it when u name it?!
@ZaCrow
Жыл бұрын
Pencil sketch pro is o e app and now I’m also using tattoo stencil app
@eric_bones2 жыл бұрын
Great video - are you using the Brother power supply, or a lower voltage one? Thanks!
@ZaCrow
2 жыл бұрын
Thank you! Im using the brother supply!
@eric_bones
2 жыл бұрын
@@ZaCrow Awesome thank you! I just ordered one, stoked to stop doing hand transfer stencils!
@freshface_2106
Жыл бұрын
@@eric_bones can you send me a link of where you ordered yours
@eric_bones
Жыл бұрын
@@freshface_2106 got mine used on eBay
@nathanaelshumate4607
Жыл бұрын
The lower voltage 12v works better for tattoo stencils
@Breenskii2 жыл бұрын
Can you also connect it to the procreate app? That’s what I primarily work with. Just curious
@ZaCrow
2 жыл бұрын
I use procreate to make my design, i save it as a jpeg or png and after i use tattoo stencil app or pencil sketch pro te make it in to a printable stencil and after i use brother iPrint and scan to print it out ! Now I don’t know if my way its the best way to do it but its what works for me best and it saves me a lot of time! Hope this is useful
@Artur-yy9qu Жыл бұрын
hello, what is the name of this white tablet on which you prepare patterns? thank you in advance for your answer ?
@ZaCrow
Жыл бұрын
It’s an ipad pro
@eduardomorona76662 жыл бұрын
Hi bro maybi know the apps you used
@rubenstoker9565 Жыл бұрын
Mine keeps jamming any tips ?
@j_demiguel_ink2343 Жыл бұрын
Why does my printer keep jamming? I have done everything exactly the same, all the way from same paper and printer and settings
@spakatron
Жыл бұрын
Watch the brother printer reviews with that pj guy , he uses his printer with a different power supply and not the brother one , he says that stops jammin
@alinkkootaishi3 жыл бұрын
Thanks for sharing 👌🏾
@martinkostal86412 жыл бұрын
Hello, can u help me with my problem with printer, please? 🙏🏼 When i put paper in to the printer and start printing, after that the print did not catch on paper, do u know why? Thanks for your answers 🤙🏼
@ZaCrow
2 жыл бұрын
If you are trying to print unedited photos directly it will not work! You need to edit them in pencil sketch pro or tattoo stencil app or do a line drawing of it in procreate! If not, lower your density in the printer app! Go to settings/density
@probodhmukherjeejeetun5685 Жыл бұрын
Hi, there. What is the name of the stencil app? Didn't find it on app store.
@ZaCrow
Жыл бұрын
Hello! The app in the video its called pencil sketch pro ..science then I’m using one more and it’s called tattoo stencil on the App Store..its a TS white logo with red background
@polagutierrez5085 Жыл бұрын
Hi there. So what is the model that is compatible with ios bluetooth?
@ZaCrow
Жыл бұрын
PJ 763 MFI
@irinaeirene52 Жыл бұрын
Multumesc!
@ZaCrow
Жыл бұрын
Cu placere!
@user-go5bn4vc3x11 ай бұрын
Can u use phone?
@ZaCrow
11 ай бұрын
Only iPhone
@user-vv2zp7fv1k2 жыл бұрын
Привет как называется программа переводить в графику
@MidcyTV2 жыл бұрын
Can you put the link for the APP please?
@kayleeguerra5021
Жыл бұрын
You can find it on amazon
@marloniasty13 Жыл бұрын
How did you connect it to your ipad?
@ZaCrow
Жыл бұрын
It’s connecting via bluetooth . You just go to settings/bluetooth and it should be there!
@malninamesha3946 Жыл бұрын
I need to buy this.
@carlitokaya1292 Жыл бұрын
the other app don,t work too!!
@shakilbutt5456 Жыл бұрын
Price?
@vincentsimon-rp1ll10 ай бұрын
thank u!
@ZaCrow
9 ай бұрын
You’re welcome!
@LVGx22 жыл бұрын
Can you only get the pencil app on iPad?
@ZaCrow
2 жыл бұрын
I have it on my iPhone as well! I have no idea if it works on android but I don’t see why not!
@nikolaplesova5939
2 жыл бұрын
@@ZaCrow i cant find it in the app store on my iphone 😢
@SayWahWah2 жыл бұрын
What kind of iPad ya use
@ZaCrow
2 жыл бұрын
Ipad pro
@anarchytattoos76793 жыл бұрын
iPad app name ?. Mention app name please
@ZaCrow
3 жыл бұрын
Pencil sketch pro
@IraQNid
2 жыл бұрын
@@ZaCrow What would be the Windows version of that software?
@click1click1click2 жыл бұрын
What is the difference between this one and the S8?
@spalger
2 жыл бұрын
Same question
@craigtrexler1108
Жыл бұрын
The PJ-763MFi is an S8 model, there are 4 submodels. This is the Bluetooth enabled model
@iubitordetaratara89992 жыл бұрын
Salut, ce gen de tableta folosești?
@ZaCrow
2 жыл бұрын
salut! ipad pro
@Mike_E_DeShaman3 жыл бұрын
Which brother app are you using to print
@ZaCrow
3 жыл бұрын
Brother iPrint&Scan
@Mike_E_DeShaman
3 жыл бұрын
@@ZaCrow right on bro
@ferhatcldr65273 жыл бұрын
Hi im having problem like i dont know which paper settings i should use for ipad when im using iprint. Help please
@ZaCrow
3 жыл бұрын
My settings are set for A4, i have the density all the way up to 10 .. and feed mode-no feed (roll paper) I don’t think the last one matters
@ferhatcldr6527
3 жыл бұрын
@@ZaCrow its just like prints a very slight look even the density is on 10... but on PC it prints very good
@ferhatcldr6527
3 жыл бұрын
@@ZaCrow And no printing voice idk why thanks for answers still bro
@user-do3jd4hy5j Жыл бұрын
Is there any way I can print the finished picture myself? I'm waiting for your answer I beg you. 발음표기 확대보기 재번역
@benito0701 Жыл бұрын
configuration?
@NikoGuertler2 жыл бұрын
hey, which stencil paper do you use ?
@ZaCrow
2 жыл бұрын
Spirit
@gregpanasiuk5210
2 жыл бұрын
Spirit is sold out everywhere. Any other good stencil paper
@ZaCrow
2 жыл бұрын
@@gregpanasiuk5210 sorry I’ve only used spirit idk!!! I buy mine from killerink.co.uk or barberdts
@gregpanasiuk5210
2 жыл бұрын
Thank you brother. Yes spirit is sold out everywhere. You can preorder november batch on amazon right now. Sold out everywhere else
@gregpanasiuk5210
2 жыл бұрын
I thought there might be like a second choice
@ellya2oo73 жыл бұрын
Si se facu’ lumina 😅thx
@ZaCrow
3 жыл бұрын
Ce lumina?🤨
@ellya2oo7
3 жыл бұрын
@@ZaCrow acum stiu mai bine cum s-o folosesc ....😊era un mod de-a zice
@ZaCrow
3 жыл бұрын
@@ellya2oo7 😁
@lisatheecologist98 Жыл бұрын
hi can I use any transfer paper?
@ZaCrow
Жыл бұрын
It has to be thermal!! It doesn’t matter the brand
@topdawgownway39792 жыл бұрын
Which app you use to lighten that picture
@ZaCrow
2 жыл бұрын
Pencil sketch pro
@denisatngh67963 жыл бұрын
buna! poti sa mi zici si mie de unde ai luat o?
@denisatngh6796
3 жыл бұрын
si daca iti trebuie vreun acumulator ceva sau vine cu el in pachet
@ZaCrow
3 жыл бұрын
Salut! Killerink.co.uk ... da vine cu tot cu acumulator si cu softu pentru tattoo stencil direct instalat de ei.. e pregatita pentru tatuaje direct din cutie
@denisatngh6796
3 жыл бұрын
ok, deci nu trebuie sa ti iei nimic in plus? intreb ca pe unele site-uri spune ca nu vine cu acumulator.
@ZaCrow
3 жыл бұрын
@@denisatngh6796 nu trebuie nimic. e totul in cutie
@carlitokaya1292 Жыл бұрын
the app don,t work!
@ZaCrow
Жыл бұрын
Try tattoo stencil app ! Its a TS white logo on red background! Its better
@carlitokaya1292
Жыл бұрын
@@ZaCrow
@carlitokaya1292
Жыл бұрын
thanx i,m gonna try tomorrow!
@nickontonglagahit74373 жыл бұрын
New here".. how much the mchine printer??
@ZaCrow
3 жыл бұрын
I bought it from killerink.co.uk for 560£ I think it was
@nickontonglagahit7437
3 жыл бұрын
@@ZaCrow Can you convert it from dollars?? Thank you!!
@ZaCrow
3 жыл бұрын
795 US dollars
@nickontonglagahit7437
3 жыл бұрын
@@ZaCrow My god it is very expensive!! Anyway thank you so much!! I promise i will always support you!!! Im from philippines!!
@ZaCrow
3 жыл бұрын
Thank you for all your support 🙏🙏🙏
@roytumbelaka3 жыл бұрын
What is the name of the sketch app? To make a stencil?
@ZaCrow
3 жыл бұрын
It’s called pencil sketch pro
@roytumbelaka
3 жыл бұрын
@mariusCrow..there is no Pro version for this on the app store,only PencilSketch and its with a really big watermark across the drawing🥺🥺
@ZaCrow
3 жыл бұрын
@@roytumbelaka when you save a photo with the pencil sketch I think it’s going to ask you if you want to buy the pro version.. it costs 3 or 4£.. then when you click yes it takes you to the App Store.
@roytumbelaka
3 жыл бұрын
@@ZaCrow ah..cool thanks mate👍🏽
@roytumbelaka
3 жыл бұрын
@@ZaCrow i’m going to but the MFI version and if needed i will contact you if you dont mind 🙏🏽
@Comeriokid7 ай бұрын
Can we stop with the gloves already 🤦🏼♂️
@ZaCrow
7 ай бұрын
lol..don`t watch if you don`t like or press the dislike button . bye
@IraQNid2 жыл бұрын
Maybe you're not old enough to know that the stencil paper you're using used to be sold as carbon paper for carbon copies from typewriters!
Пікірлер: 133
Looks good but the details on the face of the woman are basically invisible ( talking about those cheek lines ) why is that? Those lines seem dark enough to be read by the printer yet they don't appear on the stencil
@ZaCrow
9 ай бұрын
I didn’t make the stencil dark enough in the app. And also you can edit it in the photo app of the ipad to put the brilliance at 100% and it should have no problem printing them😊
Can you also print shadows and not only the outlining? I think that I read that this model is able to differentiate tones and shadows and print them, so if you prefer to have them on the stencil, as for example doing realism, this can be useful
@ZaCrow
Жыл бұрын
It doesn’t do a good job with shadows. I wouldn’t recommend it for that.
Uitandu-ma la clip am realizat ca esti Roman,printre pozele din galerie era Mihai viteazul,Decebal😂😂✌️
@ZaCrow
Жыл бұрын
da sunt roman:)
@bogdanciobanu2136
8 ай бұрын
Dupa accent, acronim... 😊
I recently got the brother pj 723 and have issues with printing the stencil paper. in the process of printing the paper gets stuck and the little printer sucks in the paper from both ends. any tips of how to fix it? unfortunately I cannot find anything useful on the web. have been trying various things like re-installing, updating, adjusting the paper. just SOMETIMES it seems to work perfectly.
@ZaCrow
2 жыл бұрын
Ajust the density if it gets stuck set it to 6 or 7 and dont print before you put the paper in !
@BrunoVenedig
4 ай бұрын
i got the same problems. i got the pj 623 and its printed the stencil slow but without rolling the paper off. my new one pj723 prits so much faster than the older on. the new one had an akku. my old 623 rc cabel. could be this problem?
One of the most affordable wireless printers
What tech is use inside the printer for print?! I bought hprt mt800q said thermal too but does not works on stencil paper..only print on a4 paper. No use for tattoo. It has cartridge ribbon in it. So.. What is in brother printer?! Do you need to change after a certain period of time?!
@ZaCrow
Жыл бұрын
All i know it’s based on heat ! It heats up the part of the stencil only where the drawing is.. it has no cartridges.. you don’t need to change anything in it ! If you take good care of it it works for life
Watching this amazing video on my iPad Pro 12.9 just like yours, awesome job 🎉
hello, I'm not able to print with my brother pj763mfi through ipad. can you help me?
@ZaCrow
2 жыл бұрын
if you have it connected to your iphone or other device you need to disconnect it from it so you can connect it to another..hope this is useful
i have one with a battery and it lasts pretty damn long, it usually turns off on its own after no use
Hi! Assuming it is fully charged and that you haven't printed yet, how long does the printer stay on for when not connected to wall power?
@ZaCrow
2 жыл бұрын
I don’t have a battery on mine because there sold separately and they are like 100£ ! I don’t really need one 🙂
Is it copied only by Usb communication? Is it not possible to make a copy of the print method of printing?
I'm trying to be a self taught tattoo artist so this honestly goes a long way for me thank you so much and if you ever see this comment I'd like to pick your brain a little bit about some of the things you had to do before you become a tattoo artist. If you're willing ofc.
@Tony-df5rs
Жыл бұрын
Get an apprenticeship.
Hello … what’s it the app ??? thanks
@ZaCrow
8 ай бұрын
pencil sketch pro...and you can also get Tattoo stencil app on IOS :)
I’m having trouble connecting to Bluetooth on my iPhone and iPad with a pj-763. It’s not showing up.
@ZaCrow
2 жыл бұрын
try to watch paul talbot`s videos about the printers ,,he knows all the information about them ..idk what to say sorry
@DanielCastillo-vg6xy
2 жыл бұрын
i’m having the same issue! did you ever figure it out?
@hateFM
2 жыл бұрын
763 isn't compatible with iOS. It is only for PC, OS, and Android.
We bought such a printer and it doesn't work properly. The paper gets stacked there and it just doesn't go and the printer jawing it. What should we do?
@ZaCrow
9 ай бұрын
if it gets stuuck lower your density .. and don`t try to print shadows or large patches of black. i recommend using the tattoo stencil app from the app store and filter the designs with the app first before printing them. i will make a follow up video about all the issues that i get asked in the comment section..it will be out in 2 days at the most.. thank you for you`re support
@uman4556
7 ай бұрын
Usually it gets stuck when you put loose layers into the printer. Don't cut the yellow sheet off. Leave around a half inch at the end so it holds the other 2 layers together. That's what helped me.
Hello thx for your video, i bought 763 moi last days but my stencil looks very lighter, some tinny lines disappear, fat lines too . Do you have the ‘ STENCIL MODE ´ enabled or disabled in the setting panel ? Thnx for your advice 🙏
@ZaCrow
2 жыл бұрын
Make sure your lines are full black in the drawing and than go to settings in the iprint and scan app and put you density all the way up to 10
Hello the name of the app pls i couldnt hear it when u name it?!
@ZaCrow
Жыл бұрын
Pencil sketch pro is o e app and now I’m also using tattoo stencil app
Great video - are you using the Brother power supply, or a lower voltage one? Thanks!
@ZaCrow
2 жыл бұрын
Thank you! Im using the brother supply!
@eric_bones
2 жыл бұрын
@@ZaCrow Awesome thank you! I just ordered one, stoked to stop doing hand transfer stencils!
@freshface_2106
Жыл бұрын
@@eric_bones can you send me a link of where you ordered yours
@eric_bones
Жыл бұрын
@@freshface_2106 got mine used on eBay
@nathanaelshumate4607
Жыл бұрын
The lower voltage 12v works better for tattoo stencils
Can you also connect it to the procreate app? That’s what I primarily work with. Just curious
@ZaCrow
2 жыл бұрын
I use procreate to make my design, i save it as a jpeg or png and after i use tattoo stencil app or pencil sketch pro te make it in to a printable stencil and after i use brother iPrint and scan to print it out ! Now I don’t know if my way its the best way to do it but its what works for me best and it saves me a lot of time! Hope this is useful
hello, what is the name of this white tablet on which you prepare patterns? thank you in advance for your answer ?
@ZaCrow
Жыл бұрын
It’s an ipad pro
Hi bro maybi know the apps you used
Mine keeps jamming any tips ?
Why does my printer keep jamming? I have done everything exactly the same, all the way from same paper and printer and settings
@spakatron
Жыл бұрын
Watch the brother printer reviews with that pj guy , he uses his printer with a different power supply and not the brother one , he says that stops jammin
Thanks for sharing 👌🏾
Hello, can u help me with my problem with printer, please? 🙏🏼 When i put paper in to the printer and start printing, after that the print did not catch on paper, do u know why? Thanks for your answers 🤙🏼
@ZaCrow
2 жыл бұрын
If you are trying to print unedited photos directly it will not work! You need to edit them in pencil sketch pro or tattoo stencil app or do a line drawing of it in procreate! If not, lower your density in the printer app! Go to settings/density
Hi, there. What is the name of the stencil app? Didn't find it on app store.
@ZaCrow
Жыл бұрын
Hello! The app in the video its called pencil sketch pro ..science then I’m using one more and it’s called tattoo stencil on the App Store..its a TS white logo with red background
Hi there. So what is the model that is compatible with ios bluetooth?
@ZaCrow
Жыл бұрын
PJ 763 MFI
Multumesc!
@ZaCrow
Жыл бұрын
Cu placere!
Can u use phone?
@ZaCrow
11 ай бұрын
Only iPhone
Привет как называется программа переводить в графику
Can you put the link for the APP please?
@kayleeguerra5021
Жыл бұрын
You can find it on amazon
How did you connect it to your ipad?
@ZaCrow
Жыл бұрын
It’s connecting via bluetooth . You just go to settings/bluetooth and it should be there!
I need to buy this.
the other app don,t work too!!
Price?
thank u!
@ZaCrow
9 ай бұрын
You’re welcome!
Can you only get the pencil app on iPad?
@ZaCrow
2 жыл бұрын
I have it on my iPhone as well! I have no idea if it works on android but I don’t see why not!
@nikolaplesova5939
2 жыл бұрын
@@ZaCrow i cant find it in the app store on my iphone 😢
What kind of iPad ya use
@ZaCrow
2 жыл бұрын
Ipad pro
iPad app name ?. Mention app name please
@ZaCrow
3 жыл бұрын
Pencil sketch pro
@IraQNid
2 жыл бұрын
@@ZaCrow What would be the Windows version of that software?
What is the difference between this one and the S8?
@spalger
2 жыл бұрын
Same question
@craigtrexler1108
Жыл бұрын
The PJ-763MFi is an S8 model, there are 4 submodels. This is the Bluetooth enabled model
Salut, ce gen de tableta folosești?
@ZaCrow
2 жыл бұрын
salut! ipad pro
Which brother app are you using to print
@ZaCrow
3 жыл бұрын
Brother iPrint&Scan
@Mike_E_DeShaman
3 жыл бұрын
@@ZaCrow right on bro
Hi im having problem like i dont know which paper settings i should use for ipad when im using iprint. Help please
@ZaCrow
3 жыл бұрын
My settings are set for A4, i have the density all the way up to 10 .. and feed mode-no feed (roll paper) I don’t think the last one matters
@ferhatcldr6527
3 жыл бұрын
@@ZaCrow its just like prints a very slight look even the density is on 10... but on PC it prints very good
@ferhatcldr6527
3 жыл бұрын
@@ZaCrow And no printing voice idk why thanks for answers still bro
Is there any way I can print the finished picture myself? I'm waiting for your answer I beg you. 발음표기 확대보기 재번역
configuration?
hey, which stencil paper do you use ?
@ZaCrow
2 жыл бұрын
Spirit
@gregpanasiuk5210
2 жыл бұрын
Spirit is sold out everywhere. Any other good stencil paper
@ZaCrow
2 жыл бұрын
@@gregpanasiuk5210 sorry I’ve only used spirit idk!!! I buy mine from killerink.co.uk or barberdts
@gregpanasiuk5210
2 жыл бұрын
Thank you brother. Yes spirit is sold out everywhere. You can preorder november batch on amazon right now. Sold out everywhere else
@gregpanasiuk5210
2 жыл бұрын
I thought there might be like a second choice
Si se facu’ lumina 😅thx
@ZaCrow
3 жыл бұрын
Ce lumina?🤨
@ellya2oo7
3 жыл бұрын
@@ZaCrow acum stiu mai bine cum s-o folosesc ....😊era un mod de-a zice
@ZaCrow
3 жыл бұрын
@@ellya2oo7 😁
hi can I use any transfer paper?
@ZaCrow
Жыл бұрын
It has to be thermal!! It doesn’t matter the brand
Which app you use to lighten that picture
@ZaCrow
2 жыл бұрын
Pencil sketch pro
buna! poti sa mi zici si mie de unde ai luat o?
@denisatngh6796
3 жыл бұрын
si daca iti trebuie vreun acumulator ceva sau vine cu el in pachet
@ZaCrow
3 жыл бұрын
Salut! Killerink.co.uk ... da vine cu tot cu acumulator si cu softu pentru tattoo stencil direct instalat de ei.. e pregatita pentru tatuaje direct din cutie
@denisatngh6796
3 жыл бұрын
ok, deci nu trebuie sa ti iei nimic in plus? intreb ca pe unele site-uri spune ca nu vine cu acumulator.
@ZaCrow
3 жыл бұрын
@@denisatngh6796 nu trebuie nimic. e totul in cutie
the app don,t work!
@ZaCrow
Жыл бұрын
Try tattoo stencil app ! Its a TS white logo on red background! Its better
@carlitokaya1292
Жыл бұрын
@@ZaCrow
@carlitokaya1292
Жыл бұрын
thanx i,m gonna try tomorrow!
New here".. how much the mchine printer??
@ZaCrow
3 жыл бұрын
I bought it from killerink.co.uk for 560£ I think it was
@nickontonglagahit7437
3 жыл бұрын
@@ZaCrow Can you convert it from dollars?? Thank you!!
@ZaCrow
3 жыл бұрын
795 US dollars
@nickontonglagahit7437
3 жыл бұрын
@@ZaCrow My god it is very expensive!! Anyway thank you so much!! I promise i will always support you!!! Im from philippines!!
@ZaCrow
3 жыл бұрын
Thank you for all your support 🙏🙏🙏
What is the name of the sketch app? To make a stencil?
@ZaCrow
3 жыл бұрын
It’s called pencil sketch pro
@roytumbelaka
3 жыл бұрын
@mariusCrow..there is no Pro version for this on the app store,only PencilSketch and its with a really big watermark across the drawing🥺🥺
@ZaCrow
3 жыл бұрын
@@roytumbelaka when you save a photo with the pencil sketch I think it’s going to ask you if you want to buy the pro version.. it costs 3 or 4£.. then when you click yes it takes you to the App Store.
@roytumbelaka
3 жыл бұрын
@@ZaCrow ah..cool thanks mate👍🏽
@roytumbelaka
3 жыл бұрын
@@ZaCrow i’m going to but the MFI version and if needed i will contact you if you dont mind 🙏🏽
Can we stop with the gloves already 🤦🏼♂️
@ZaCrow
7 ай бұрын
lol..don`t watch if you don`t like or press the dislike button . bye
Maybe you're not old enough to know that the stencil paper you're using used to be sold as carbon paper for carbon copies from typewriters!
can you give me you ig
@ZaCrow
2 жыл бұрын
instagram.com/crowtattoos/