Wow! How many "Firsts"?! We're all winners! Happy Birthday Kevin. Regular guys get a tie on their Birthday - Kevin gets Tie Rods! Brit wearing "Utah Lederhosen"..? Does this install count as a Chris "booty call"?! Color Country replaced my WK's front drive shaft after it broke on a trail with y'all a couple years ago. Great local shop. Those tie rods look amazing. LiteBriteNationBirthdayBroncoBash!

Saving up for the CWF set like those for my prerunner. Huge difference on dirt roads, that weird IFS wheel wobble goes away at higher and lower speeds!

You guys are awesome. The level of information is very educational to anyone interested in a wide range of vehicles, off-road or otherwise. How and why you might want to modify them and how to look at trails and make your way through, usually without an issue. However, I'm compelled to point out a couple of things you're not doing well. Shop safety is lacking! You're teaching that working under a vehicle without eye protection is OK. Be honest now, how often do objects or dirt fall on your face and unprotected eyes when under your rigs? The first rule you learn in shop is to have eye protection! I hope no one has an issue with losing an eye out of it. Using a floor jack is a common practice for most of us as we don't have a lift in our garage. But to not use jack stands to support the vehicle and then roll under it, is totally against safe jacking practice. OK, I know, rolling under a jacked-up off-road vehicle with the tires on maybe as there's so much clearance under it that you'd have to be under a tire before having an issue. But, take the tires off, your chest is now the high point when the jack decides to fail. As I said at the start, your content is VERY educational and I've learned a tremendous amount from your channel but falls short when it comes to shop safety.

Those look strong enough to handle even Kevin's driving! 😆 🤣 😂 Happy Trails to all at LBN!

@ZboeC5

11 ай бұрын

LOL (press X for doubt)

If there's a weak spot, Kevin will find it😂😂. Great video, those look great ❤️❤️💯🤙

Have a great and safe birthday trip you two😊

Finally a real tie rod solution not the funky sleeve blocks

Those should make the raptor pretty beefy. Look forward to seeing some Colorado wheeling videos. I’ll also add some tie rods to my list for the taco now just to carry. I saw my boots were torn on my ucas and lcas and was going to replace them myself but Toyota said to make an appointment so I’ll take free. I do plan to get the upper arms for the 3inch lift eventually.

Now that thick. Lol to cool love the overalls Brittney. God bless. Happy belated Birthday Kevin.

So cool to see the mods you're making to the BRaptor. Since I don't have a Jeep but a 22' Wildtrak I am watching intently to see what else I need to do. I did full NVM aluminum skids with UHMW as well as their rear shock skids. Right now just installed the Broncbuster braces and the bushing in the rack. Did Rock Slide Engineering step sliders for wife access to her ride but would have done NVM rock slider if I could have. Saw Kevins FB post about rear bumper damage curious to see what you have done there. Thats on my list to replace the big ugly plastic thing soon. Looking at DV8 comp rear bumper right now. Keep up the great content.

@LiteBrite

11 ай бұрын

Bumper carnage video will go up on YT next Wednesday! 😁🤙

Happy Birthday Kevin. Love your videos and your Bronco. Maybe someday I can join you in my Jeep Renegade Trailhawk.

I always carry axles, tie rods and tie rod ends with me in the 4Runner, about to prepare the Bronco the same for trip to Ouray next month.

Awesome 🎉🎉🎉love the bronco💙💙💙💙

We just missed you guys...seen the Jeep last year but knew ya'll were on vacation so did not hang around Ouray to bother you. Did stop by and get a pic with Andy at Burning Ass! Hope to see you out there next year.

The shop I’m at has the exact same alignment rack. I like those tie rods over the bronco I had in with some clamp on reinforcement. 12 Allen screws to remove before setting the toe 🤣.

I had a boot leak on the factory Badlands rack.. $1,500 repair. I put the HOSS 3.0 steering rack in instead of the factory rack and it's worked great.

GOLDDDDDDD, highly enjoy all yins wrenching in the day care. Stay fancy. #LiteBriteNation !!!

When I saw your cute outfit I thought to myself “is it October Fest 2023 already” ❤but it’s still only July :(. Plus, no huge glass of beer.

Knuckle now the weak link. Time for some 74 Weld portals!

THANKS FOR THE VIDEO

If you wanna be done with alignment issues you gotta get UCAs and lower arm lockouts… otherwise you’re just chasing issues. I usually lock them out or paint the ailment settings on the lower bolts so that we can reset them later after the trail . Raptors love to get out alignment off road. When you're ready to see what we do for raptors and building into the broncos shoot me a DM, our new shop is down the street from ya in south Utah 🤙

@LiteBrite

11 ай бұрын

Ya we have lockouts on the way with billet upper arm

What did y'all ever do..... before you got a Chris. Lol. Thank you Chris for the major efforts.

@LiteBrite

11 ай бұрын

We did our own work, or paid shops/mechanics around the country for their skills & expertise. 😅

@MrJuly151995

11 ай бұрын

Y'all are very blessed to have Chris, keep up the great work. See y'all at Jeep Invasion at Pigeon Forge,Tn.

Great content. Hope to be able to get brapter or new 392 soon. Question off subject, where has Bec been? Is she still part of your team?

Happy Birthday Kevin! :)

Damn, I missed you coming to CO! 😢😢

I haven’t watched the videos in a minute. But Kevin is looking super fit.

@LiteBrite

11 ай бұрын

He’s definitely been trying!

Love the Braptor upgrades! Planning a trip to the Rubicon this year?

@LiteBrite

11 ай бұрын

We are, for the Jeepers Jamboree! But if the Stepchild is finished by then, we’ll be taking her. If not, we’ll have to take the Braptor.

@GoldCountryBroncos

11 ай бұрын

Very cool! Hope that our Gold Country Bronco group will be able to meet you all!

I'll say toe plate are still only so close. I found four point string got me even closer on the JK. You all doing Chinamans when you visit back here in CO

Sum bubble what brit ??? Chris caught it ! 🤣

Hmmm, a Braptor with the 7.3l Godzilla engine. That could be fun!

@Reecesavage-Alwayswin

11 ай бұрын

Too heavy

Happy pre-birthday!

Kevin so funny about alignment come on guy rock crawling the culprit !!!

Nice overalls their brittney

that has got to be the biggest downfall of that rack system the electronics being able to get wet where i live in ohio we wheel in old strip mines and it would get destroyed

Nice!

Where did bec go. Also, Britt, I love it when you say rack

Great video, thank you for all the information and looking hot and beautiful B. LOL Don't you think it would be easier to just bring the parts in case they break? Thank you

3:20 My wife used to have an older Husqvarna ride on lawnmower, and it seemed every time you’d mow the lawn you’d hit something in the ground and break one of the alloy spindle towers. I soon got sick of that, so I got some round steel bar and machined, not one, but two spindle towers out of steel (I don’t know how I did it, mimicked them perfectly) and installed them with a ‘now take that you MoFo’, kind of attitude! Well, the very next time my wife used that mower she hit something bad ‘mower no go’ she cried. Upon close inspection, the spindle towers that I made were perfectly fine, but the shock had transferred up the chain of command and snapped the con rod and destroyed the piston… we buried the mower several days later!

I did not realize you was on hyperdrive I've watched that entire show beginning to end

Now to find the next weak point that the tie rod failures were masking.

@FlawedOffroad

11 ай бұрын

gonna be the aluminum knuckles

@mattb.2359

11 ай бұрын

willling to bet is a cv that's going to go next.

@buysncharge

11 ай бұрын

The truck isn't up to the task. Shouldn't exist. Sorry Ford. It's a turd.

@MX304

11 ай бұрын

@@mattb.2359 That's my guess as well. Or possibly the transfer case.

@KN-jw7ts

11 ай бұрын

Really huh? Odd that they love it so much.

Can you epoxy/silicone/something to the electronics inside the rack to protect them from water?

Those look super high quality. The age old question, make the tie rods stronger and grenade your steering rack or let the tie rods be your fuse and change them on the trail. Those are beefy as hell. I’m anxious to see how your rack holds up. Id love to see a tie rod as strong as the factory unit but make them easily trail swappable.

@LiteBrite

8 ай бұрын

We have a 74weld billet aluminum steering rack. 🙂

I've seen the option for the bronco it lists the top option model with 37 inch tires compared to like a 32 on the base my curiosity is what upgrades drivetrain wise does Ford employ with the vast difference in off-road options since there's quite a difference between a 31.8 inch tire and a 37x12.50 . I'm just wondering if the 37 inch tire set factory is about as stout as someone just buying a Rubicon and slapping 37s on it or if it's really able to take real abuse with any wiggle room for a larger tire . I've seen these newer broncos on the road honestly I like their looks better than a Wrangler just wondering how the drivetrain actually stacks up ?

10:14 her explaining diameter is pretty exciting!

Do you have a video that explains your background? You two are very knowledgeable

@LiteBrite

9 ай бұрын

We do! There are a couple different ones. AMW4X4 did an interview that covers a lot of it. 😊

I wonder if KibbieTech has plans for making Braptor parts. You guys should reach out to him. Custom billet uniball J-arms would be dope af.

I stumbled across her I mean this and good god. I’m here for it 😅

Should bring the other set with you just in case.

@LiteBrite

11 ай бұрын

If we somehow break these tie rods, there’s likely significant other damage to the Braptor & a spare tie rod won’t be enough to help. 😅

So it sounds like everyone needs to build there Bronco old school 🏫 and put a Dana 60 front and rear and put a supercharged Cobra engine while there.

Coyote V8 swap has to be in the near future. Another YT video shows that the motor drops right in. Gotta figure out the wiring part.

The 3.0 Liter can be tuned to handle all the mods you stated! Just ask the Explore ST guys. No need for v8 swap.

Amazing product!! I follow and subscribed to Foutz Motorsports channel!!

Regarding the soon to be too anemic 3.0, get ahold of Jeff C, your crawler friend in Hurricane (toukerville actually). Jeff uses a company called Montune in LA to build the Ford 2.3 capable of 900HP with the right tune, fueling and turbo. He's been having these 2.3's built for many of the top crawler guys in the area. I'm sure you know them all. I won't put all their names on blast here. I'd ask Jeff what he thinks about Montune building out a 3.0. If they can get the 2.3 to output 900HP in race form imagine what they can do with a 3 liter. I may be way off here, but it's worth a phone call. I know there's nothing like a big bruiser v8 under the hood, but a built 3.0 could be a really good option. Woody has his # if you guys don't.

When are you getting a winch bumper

She said rack ! Haha . Nice work . Do some bolt stuff before going to V8.

Hi! Will these TIE RODS fit 23 Wildtrak? Thanks!!

I know Greg. We used to race him in SCORE and BITD.

Should have used those jack stands that were sitting in the background!

@arag7023

11 ай бұрын

Nah, not with these guys who needs them.

What are the weak points on the JKUs??? I heard ball joints but otherwise

As nice video. Btw, were you guys were on one of the popular Colorado passes today (07/14) afternoon?

@LiteBrite

11 ай бұрын

We were! 😊 Our videos generally upload 1-2 weeks behind.

@zgh9012

11 ай бұрын

@@LiteBrite awesome. btw, much thanks for your help on right spot. I think it was Kevin who was hugging Raptor to the wall. 👍 Also Happy Birthday to Kevin!!!

Time for a Godzilla!

28th inside 30 mins 👊🏻💪🏻

Why didn’t you save the extra tie rod you didn’t use, as a spare, for when (if?) the other one breaks? Just a thought? Like the trophy trucks bring extra parts all over the place.

@LiteBrite

11 ай бұрын

Mostly because if we break these, the damage is likely more extensive than just the tie rod.

I would like to see you guys do a collaboration with Matt’s Off Road Recovery.

@RyanRKJ

11 ай бұрын

They have.

@J-P88

11 ай бұрын

They have, if I remember correctly they are the ones that encouraged him to start a You Tube Channel. A few months ago they done a Video with Matt as well as Mischief Maker

@LiteBrite

11 ай бұрын

We’ve done several. 🙂

@trjnsd6874

11 ай бұрын

I first found Kevin & Brit when watching a Matt's video, several years ago.

@paulnance4759

11 ай бұрын

@@LiteBrite I should have worded that better. I do know that you have and I enjoyed all the past collaborations that you’ve done. I always enjoy them and I hope to see another one. Maybe with Matt’s wrecker? Can Matts off road wrecker off road better that the step-child 3.0?

Can you do this job without an alignment?

I m actually saddened that they sold the demon child.

You need to do a supercharged godzilla engine swap

Pretty sorry that Ford would build such weakness into the steering of a vehicle at that price point.

@arag7023

11 ай бұрын

Hey they've got lots of money to burn why not.

Why do I see fox shocks on the stepchild not Bilstein?

You're crazy!

Getting @sarah n tuned vibes

Kevin show her his new thicker rod. Steering that is.

What happened to the Super Hot fabricator Bec?

@LiteBrite

11 ай бұрын

She’s gone. There’s was no future for Bec on the channel. She was an apprentice, and has taken what she’s learned and now has a good paying job. We’re no longer taking in any builds so there’s no way for her to make money. We will be focusing on our own personal builds which was always the original plan. We had to take customer builds in so she could get paid and during that time ALL of our vehicles got neglected and that’s not acceptable. So we went back to the original plan of just having chris as our friend and personal fabricator. Bec was never in the plans and we tried to adapt to make it work with 2 people but that didn’t end up working out, so now back to the original plan. Bec had 4+ months notice of this change and that time has now come and gone.

Kevin are you listening to Dance Monkey? Bottom middle of instrument cluster

Das Boot!

What happened to Bec, we haven't seen her in a while

@LiteBrite

11 ай бұрын

She’s gone. There’s was no future for Bec on the channel. She was an apprentice, and has taken what she’s learned and now has a good paying job. We’re no longer taking in any builds so there’s no way for her to make money. We will be focusing on our own personal builds which was always the original plan. We had to take customer builds in so she could get paid and during that time ALL of our vehicles got neglected and that’s not acceptable. So we went back to the original plan of just having chris as our friend and personal fabricator. Bec was never in the plans and we tried to adapt to make it work with 2 people but that didn’t end up working out, so now back to the original plan. Bec had 4+ months notice of this change and that time has now come and gone.

@jimwiseman2427

11 ай бұрын

I was going to ask the same thing. It was cool of you guys giving her the opportunity to learn, but she will be missed. I would have liked to have seen the finished build of her jeep.

Maybe someday the step sister will know what its like to crest cleavland rock without a winch diaper 😅

I wouldn’t trust it either 😂😂

How you gonna get a 74weld rack and not portals?! Almost offensive lol

@LiteBrite

11 ай бұрын

They currently don’t make portals for the Raptor.

👍

That 1mm can make the difference 😂

Where's Bec??

@LiteBrite

11 ай бұрын

She’s gone. There’s was no future for Bec on the channel. She was an apprentice, and has taken what she’s learned and now has a good paying job. We’re no longer taking in any builds so there’s no way for her to make money. We will be focusing on our own personal builds which was always the original plan. We had to take customer builds in so she could get paid and during that time ALL of our vehicles got neglected and that’s not acceptable. So we went back to the original plan of just having chris as our friend and personal fabricator. Bec was never in the plans and we tried to adapt to make it work with 2 people but that didn’t end up working out, so now back to the original plan. Bec had 4+ months notice of this change and that time has now come and gone.

Where has Bec Gone she is an asset to the show...

@LiteBrite

11 ай бұрын

She’s gone. There’s was no future for Bec on the channel. She was an apprentice, and has taken what she’s learned and now has a good paying job. We’re no longer taking in any builds so there’s no way for her to make money. We will be focusing on our own personal builds which was always the original plan. We had to take customer builds in so she could get paid and during that time ALL of our vehicles got neglected and that’s not acceptable. So we went back to the original plan of just having chris as our friend and personal fabricator. Bec was never in the plans and we tried to adapt to make it work with 2 people but that didn’t end up working out, so now back to the original plan. Bec had 4+ months notice of this change and that time has now come and gone.

No link to the tie rods in the description?

@LiteBrite

11 ай бұрын

That’s why we showed their website in the video itself & provided all of their social media. 😊

@swooshdave

11 ай бұрын

@@LiteBrite I guess that’s one way to do it.

You're in Moab though just called Rory or matt

@LiteBrite

11 ай бұрын

This is prepping for a Colorado trip, they wouldn’t be much help. Lol And still wouldn’t solve the issue of getting the rig repaired with unavailable parts.

@stevencherrett-eb6zh

11 ай бұрын

Fair enough

@stevencherrett-eb6zh

11 ай бұрын

Love your videos

(factory alignment) give a blind man a wrench and a broken alignment machine. down the road

What happened to Bec?

@LiteBrite

11 ай бұрын

She’s gone. There was no future for Bec on the channel. She was an apprentice, and has taken what she’s learned and now has a good paying job. We’re no longer taking in any builds so there’s no way for her to make money. We will be focusing on our own personal builds which was always the original plan. We had to take customer builds in so she could get paid and during that time ALL of our vehicles got neglected and that’s not acceptable. So we went back to the original plan of just having chris as our friend and personal fabricator. Bec was never in the plans and we tried to adapt to make it work with 2 people but that didn’t end up working out, so now back to the original plan. Bec had 4+ months notice of this change and that time has now come and gone.

@Golden-69

11 ай бұрын

Well, that sucks. She will be miss. Did she finish her jeep? Wish her the best in her new chapter.

@brians5791

11 ай бұрын

Hopefully she starts producing more KZread for her channel. She has what it takes for success, not afraid to get her hands dirty and definitely appealing for viewers. I wish her success.

@LiteBrite

11 ай бұрын

She doesn’t have her own KZread channel, and likely won’t make one. It’s too much work.

@goffroad8979

10 ай бұрын

Wow!

Source a Coyote motor and do a build on it.......then slip it into the Raptor.

Great improvement but I didn’t see any jack stands!

Next time please use jack stands so you don’t get crushed.

@gwood69

11 ай бұрын

I got 26 inch jack stands. And not sure if those would do well with that vehicle. Maybe they just don’t have them cause they have a lift? I got the 4 3in1 bottlejack jack stands. Not sure about the raptor but ifs vehicles usually end up being unibody and very hard to have a decent spot for a jack stand let alone a jack besides the control arms it’s just how they make the newer cars so people can’t work on them them selves

@jayj7681

11 ай бұрын

Exactly what I was thinking. Good spot.

@Evans-low_speed-high_drag

11 ай бұрын

@@gwood69 throw the wheels/tires under it, use some 6X6 wood blocks anything to safely work on a vehicle. Relying on just a floor jack alone is short sighted and hazardous.

Between the 4 of you Brittany, Kevin, Bec and Chris are any of you related?

I thought the weak point was Kevins right foot.

@LiteBrite

11 ай бұрын

Haha could be but the bronco doesn’t let you really beat it

Get 74 welds steering and PORTALS!

@LiteBrite

11 ай бұрын

They currently don’t make portals for the Raptor

@lennyross2813

11 ай бұрын

Sacrilege!

WHERE IS BECK AND HER JEEP BUILD!!!!!.?

@LiteBrite

11 ай бұрын

She’s gone. There was no future for Bec on the channel. She was an apprentice, and has taken what she’s learned and now has a good paying job. We’re no longer taking in any builds so there’s no way for her to make money. We will be focusing on our own personal builds which was always the original plan. We had to take customer builds in so she could get paid and during that time ALL of our vehicles got neglected and that’s not acceptable. So we went back to the original plan of just having chris as our friend and personal fabricator. Bec was never in the plans and we tried to adapt to make it work with 2 people but that didn’t end up working out, so now back to the original plan. Bec had 4+ months notice of this change and that time has now come and gone.

Where’s Bec? What ya do with her ?

@LiteBrite

11 ай бұрын

She’s gone. There was no future for Bec on the channel. She was an apprentice, and has taken what she’s learned and now has a good paying job. We’re no longer taking in any builds so there’s no way for her to make money. We will be focusing on our own personal builds which was always the original plan. We had to take customer builds in so she could get paid and during that time ALL of our vehicles got neglected and that’s not acceptable. So we went back to the original plan of just having chris as our friend and personal fabricator. Bec was never in the plans and we tried to adapt to make it work with 2 people but that didn’t end up working out, so now back to the original plan. Bec had 4+ months notice of this change and that time has now come and gone.

👍❤️ #Jellynation

Hey where's Bec?

@LiteBrite

11 ай бұрын

She’s gone. There’s was no future for Bec on the channel. She was an apprentice, and has taken what she’s learned and now has a good paying job. We’re no longer taking in any builds so there’s no way for her to make money. We will be focusing on our own personal builds which was always the original plan. We had to take customer builds in so she could get paid and during that time ALL of our vehicles got neglected and that’s not acceptable. So we went back to the original plan of just having chris as our friend and personal fabricator. Bec was never in the plans and we tried to adapt to make it work with 2 people but that didn’t end up working out, so now back to the original plan. Bec had 4+ months notice of this change and that time has now come and gone.

Where is Becca and her Jeep haven't seen anything about it lately.

@LiteBrite

11 ай бұрын

She’s gone. There was no future for Bec on the channel. She was an apprentice, and has taken what she’s learned and now has a good paying job. We’re no longer taking in any builds so there’s no way for her to make money. We will be focusing on our own personal builds which was always the original plan. We had to take customer builds in so she could get paid and during that time ALL of our vehicles got neglected and that’s not acceptable. So we went back to the original plan of just having chris as our friend and personal fabricator. Bec was never in the plans and we tried to adapt to make it work with 2 people but that didn’t end up working out, so now back to the original plan. Bec had 4+ months notice of this change and that time has now come and gone.

What if you’re already a Chris? I’d really hate to grab my self while trying to work it might get kinda weird lol I guess I could grab another Chris but that might be even weirder. Would we just grab each other? Seems redundant 🤣

@LiteBrite

11 ай бұрын

🤣🤣

@ 6:50... I'm in the commercial aviation industry, I work with strippers and dikes a lot... but like us aviation mechs, Chris needs to be a lil more PC... They are not "dikes" anymore... they are "alternative lifestyle pliers". 😆🤣😎

@LiteBrite

11 ай бұрын

Hahaha lmao 😂

@jeepinintexas6215

11 ай бұрын

Lol, I got one for you. For long nose pliers, I call them heeb (Hebrew) pliers.