Sorry about the abrupt ending. I forgot to add the outro song. Been hectic around here. Waiting in parts now.

@john242ti

Жыл бұрын

No worries. Nothing like some speed holes in suspension hardware, tho.

@michaels.8663

Жыл бұрын

It's cool, it's playing in my head right now lol

@H4rleyBoy

Жыл бұрын

Don't be sorry, I stop there anyway ;) ;)

@WesAKAthemilkman

Жыл бұрын

No need for an apology, thanks for the entertainment/doing what you do brother.

@thekingsilverado3266

Жыл бұрын

That old dinosaur is in amazing condition on the outside. The aluminum isn't all dented up looking like crap.

I'm a building maintenance supervisor at a wv prison. I had a heart attack in September and have been home, bored out of my mind. I stumbled onto your channel and have been binge watching since. Makes me feel better watching actual work being done. I Like the way the videos are done and I'm actually learning a good bit. Thanks for the therapy, I'm sure you didn't have that planned, but it helps me want to get back to work. Stay safe...

After seeing how you used to suffer beating out kingpins, that press tool was a wise investment.

After all the years of watching your channel I finally understand where you got the title “Bus Grease Monkey” from. Man you guys swim in grease! Must take you a while to clean up at the end of the day!

Had a customer who loaned her VW Bug to some friends. They drove it onto a dolley ,towed behind their M/H, and left it in gear! Locked-up crankshaft in engine and fried the transaxle. Input shaft was welded into the flywheel gland nut, and was nearly impossible to get them separated. Choking clutch stench. Required two new rear tires also, that was the cheap part.

my dad was a bus diesel tractor trailer mechanic i never got to see that so it is fun for me at 66 to watch it be done.

Them taperd king pins were the best ,no wedge bolts to let water in and rust to begin!

G'day Scott, Awesome video. Great you being behind the camera explaining what the young bucks have found and what their doing. Any chance of a quick peek inside I know is stripped but it's always interesting getting a look at the entire bus. Thanks for sharing . ✌️Peace from Melbourne Australia.

Man I would like to have got that one. I'm dumping a bunch of things I either lost interest in or I simply don't Need. We seem to think we have to have everything when we're young and later find our solitude in returning back to a simpler life. I'm not saying I'm going to get a grey dog for sure "but" I catch myself dreaming about it since I've been watching your Platform. Just a young old truck driver that's been in love with the sound of the two stroke Detroit my whole life and I'm thinking maybe this is the next adventure, besides you're now between me and Nashville so I wouldn't have that far to go for whatever the bus needed. I really enjoy the Platform.👍

Hunter is certainly coming on - the way he grunted those main cap bolts up was nearly perfect, he's just got to get the volume right - another twenty years of practice required ;-)

@Bus Grease Monkey , Come across your page while viewing either @Diesel Creek or @Bruce Wilson . Love your video's lot of info into what your doing. Viewing from NewZealand

These guys have a GREAT teacher! Young people are not bad! They just need someone who will teach them! As a retired college administrator, I have much respect for young people! They are NOT all bad!

Wow !! you guys make that look easy .🤠😎

I'm getting warm fuzzies about the incredible education Hunter is getting -- presumably while getting paid for it. Props to the master educator.

Your team work hard and effective as well!

Hei Scott, Very good that you have three young men willing to be a helping hand and fix the buses.

Great video guy's

Your so awesome,u know attention to detail that's y u r top knotch

Pressure Washer Tips Turbo Nozzle Pressure Washer 3000 PSI Max Rotating Pressure Washer Nozzle with 2PCS 1/4'' Quick Connect for Cleaning Brick, Concrete, and Vinyl Surfaces. And will never go back. Works so good.$17.00

Cool looking bus

ABSOLUTELY-----> AWESOME!!!!!!!!!!. 🙂

My old double deck 1970s city bus engine used to hunt bad until she was up to temperature and then purred like a kitty. Mechanical pump an engineer let her get hot then set the pump. Put her in 2nd gear (fluid flywheel semi automatic 1st was crawler for full load on a hill start) slight dip then she would purr. Llet off the brake and purrs wait for traffic light to go green. In crawler 1st go to 8mph shift to 2nd and off we went. Lovely old British Gardner engine. Not fast but will go up any hill. 5 speed semi automatic with air shifter on 5 brake bands.

@michigandon

Жыл бұрын

I've learned quite a bit about British buses and AEC diesel engines from watching the Routemaster 4 Hire channel.

Thanks good information

Always crazy to me how its the guys that look like they're working slowly, & get a ton of stuff done.

@wallacegrommet9343

Жыл бұрын

Thats called craftsmanship

@HuskyGamersUNITE

Жыл бұрын

do it right, do it once.

At about 23:27 I heard the dinner bell ring but I didn't see anything to eat!

awesome vida

@paulpavilions

Жыл бұрын

what tool pulled that kingpin?

@BusGreaseMonkey

Жыл бұрын

Tiger tool king pin press

Them radius arm bushings look alot like Chalmers rear suspension bushings ,they are available in poly ,2 piece for each end

KY jelly does a better job lubing rubber bushings than dishsoap. Incredibly better. Astrolube also.

Hi from the UK. Thank you, Scott and Tyler for your usual informative and interesting video. I'm never going to own a bus, still less a US one, but I really enjoy your KZread channel which I have followed since inception. At 21:09 I noticed that the bolts holding the wheel arch shroud appear to be rusty although the shroud itself and the main body of the bus, being aluminium, are not. Is the rust on the bolts a consequence of non-standard (i.e. steel) bolts having been retrofitted, or because of salt on the winter roads? Alternatively, is that the way they came out of the factory? Have you heard of Ben Hamper's book, 'Rivet-head' (It's a tale of his life working on the assembly line at GM Truck and Bus). If not, I think you'd enjoy it. Maybe a Christmas Gift...... .

@hgone7221

Жыл бұрын

Thanks for the book suggestion. I was a maintenance mechanic/ammonia refrigeration Tech for the big G for many years. I will enjoy this read.

keep the clips coming

I have been wondering about this bus. It has been sitting on the pad for awhile.

I hate when people blank out window using flat sheet metal, it would not be hard to make proper ribbed filler panels that would blend right in. It's actually easy to make any body panels needed for a bus by making a simple dies and running sheets through a pullmax.

Do yourself a huge favor and get a good 50-100' pressure washer hose and live swivel for the wand end. Makes cleaning big vehicles so much easier then having to move he pressure washer around all the time.

I witnessed someone towing a VW bug with a U-Haul truck that pulled out in front of me with the VW in gear. It was dusk and despite flashing my headlights repeatedly the driver never stopped. I could here the engine on the bug turning over at a pretty high RPM. It took about a mile and there was a very loud hammering "Clunk" and the tires locked up on the bug. Driver kept going with the back tires locked up and smoking with the bug swaying side to side. I turned off at my exit since it was too late to try to help any further.

Short of that drum not being balanced at the manufacture I don't know how it could get so far out of balance in operation. Man is that hard on everything.

"The 4104 with the propped up engine door."

wish you guys were in the uk id trust you to replace my rear wishbone bushes on my car

Would be cool to Restore back to Grayhound bus

The 4104 with the propped up engine door.

Too hot in November? WTF? Anyways... Love how that Vintage Detroit aluminum cleans up. 4014 /w 6-71 is a great machine! Find me one like this and I'll buy it! Tyler, where the F are your safety glasses when you are knocking down that nut with your cutoff wheel. You crazy!

@BusGreaseMonkey

Жыл бұрын

That was not November. Did you see the green trees and hear the cicadas

Really makes you wonder just who they have working on those units,,,,sure aint rocket scientist,,😳

@Phiyedough

Жыл бұрын

Yes, I often think that. I suppose these days if it can't be fixed using a laptop they don't have a clue.

Oven cleaner to get all that dirt off😉👍

Try using blue Dawn dishwashing soap concentrate

@ 12:30 Pulling the lassoed bus inside -or- discovering the limitations of an all electric plug-in bus😉

You should check out Chem X here on the tube, he has some awesome cleaning chemicals.

Now that’s funny. Pre-trip. You can’t even get these people to do the simplest pre-trip in the world. It’s not even classified as a pre-trip. Well, maybe it is. A walk around. Just checking your lights looking for the obvious tires rims missing Lugnuts light covers missing lights not working. Been down look under the vehicle. When it’s running. See if somethings leaking or there’s a puddle forming underneath the vehicle from a leak. If so stick your finger in it and see what type of fluid it is. So you know what fluid to check. Maybe you need some if you can’t check it you know to stop at a garage.

Did you add a second mechanic helper to your crew (you, son and son-in-law?).

Have you seen what that KT3406E is doing to potential housing for the homeless?. It makes me sick.

Mr cool

They need to put in a grease pit it would be easier to work on the motors

@BusGreaseMonkey

9 ай бұрын

No it’s not easier. 90% of engine work is from the back, sides of top

The tool works good but is a pain in the butt "loosen tool: *pling* King pin falls out without ever swinging a hammer on it.."

@BusGreaseMonkey

Жыл бұрын

We always try a few hammer hits first. Sometimes it works quick and easy. The press takes about 7-8 min to get out and set up but it does work on getting it out in about 1 min. If the initial sledgehammer works it’s a quick easy But if it don’t the press is a dream

One of those axel nuts cost me an eye. Please wear safety glass while working on them. It’s not fun losing an sight

@BusGreaseMonkey

Жыл бұрын

Please explain how that happened? I can not figure out how an axle nut injury to the eye could happen.

@123turby

Жыл бұрын

@@BusGreaseMonkey I was using a chisel to take the axle nut off and a chip of steel penetrated my eye. Went to the hospital they examined me and sent me home. 9 months later sitting in a coffee shop I said to my buddy we have to get out of here there’s flies everywhere. He looked at me and said nope no flies here but you have one green eye and one blue eye. The piece of steel was floating in my eye for 9 months and they guess when I rubbed my eye the steel went trough my retina. Had major surgery and 10 years later totally blind in that eye. After another 10 years they had a procedure to replace some vision maybe 40% and I had that surgery. So long story yea. You only get two eyes. I hope I’m not preaching. Anyway love the Chanel and thank you for the content.

@BusGreaseMonkey

Жыл бұрын

We use axle nut sockets not chisels. As a matter of fact I’m always bitching about people using a damn chisel instead of the right tool. So this is more of a confirmation of don’t use a chisel to do the job of a socket. Eye protection is something that’s always a good eyedia for most tasks anyway.

@123turby

Жыл бұрын

@@BusGreaseMonkey totally agree. I’m an old timer and back in the day the shop was to cheap to buy them or they may not have been readily available.

@BusGreaseMonkey

Жыл бұрын

I see so many chiseled axle nuts I’d like to know how that became the acceptable practice to do that. Toque specs and caution just throw to the wind.

All that chisel damage on what were originally perfectly good, serviceable, carefully made parts which should otherwise still be that way.🤦‍♂ Reminded me of the old adage "if you have a hammer in your tool kit eventually everything might start to look like it should be bashed with it". Apparently it applies to chisels as well! Maybe people who do inexplicable, inexcusable stuff like that chisel damage should be referred to as 'part-time pounders'?

@kenore4003

Жыл бұрын

When the only tool you've have is a hammer then everything looks like a nail!

You forgot to play that song again at the end oops

Does anyone know what a pd4107 would worth no motor or tranny pretty solid though

@BusGreaseMonkey

Жыл бұрын

It’s probably worth $0 scrap value is about what it’s going to cost someone to haul it away.

I have missed something for sure. I Hunter your employee?

I'm interested in Tylers channel. Can you give me the name of it, please?

@john242ti

Жыл бұрын

Indiana Diesel is his...

Grease Termites strike again. Lol

You have some very hard working lads in your shop, not pleasant at all working under old rust and crud.