Greatest tip ever. I have searched all over to find out how to adjust the coffee dose on my Oracle. The point about "popcorning" was fantastic bonus information I didn´t know I needed. Thank You very much 😊😊🙏🙏

On the later production runs, you do not unscrew the tamper but just pull down and it slides off. The adjustment screw also just pulls off downwards. The view on the manufacturers website is quite helpful.

@tackoo

10 ай бұрын

Can you mention which view? I’m having hard time understanding how I will pull down the tamper each time by a consistent amount.

@crimzdad

Ай бұрын

Thanks! So easy to pull down😊 glad you let us know.

@paulbarham7083

21 күн бұрын

And there is a magnetic tool to remove the tamping fan in the tools drawer!

@nabilhelmy7007

13 күн бұрын

Awesome! You really helped me. I would have stayed screwing it infinitely without your comment 😂

Thank you! I didn't realize changing the tamp height was so easy.

this was really helpful. Had my none touch oracle for just over a year now and ive never twiddled with the tamping fan setting but i think i will have a look at it now

Moreee moreeee on this machine...... I just got it and that was brilliant Thank you

Thanks for the tips. I’m looking at getting the Touch this weekend and from what I have seen other new users complain about, these tips would fix them. I look forward to checking out your other videos. 👊🏻

The pros who reviewed this machine were NOT aware of the dosage calibration, and it was one of the things that bummed them the most - aside from not being able to see pressures and stuff, but that really wouldn't be useful for the target audience of this machine. I got one refurbished off of eBay and I hope to get good at using it and enjoy it for as long as possible. Thank you for this great video!

Wow! I just bought this machine. Your tips are so valuable and clear! Thank you sooo much!! 🙏🙏

Wow, I’ve had my barista for over five years and never dialed in my machine. This made a good difference! Thank you!!

Thanks Very much , BEST info i have ever seen on this product.

Thank you SO much for this video! I've had my Oracle Touch for a little over a year now and I've basically stopped using it because I could never pull the perfect shot. I followed your steps and reduced the dose by 4 grams. I'm excited to try it again. Maybe I should've have called you for tips a long time ago, but had given up all hope. Thanks again!

@op14435

Жыл бұрын

Did you create better coffee?

Thx for the tips, i have been concerning the reasons my oracle touch having inconsistent issue. You made the good point about the pop corn issue at the hopper when there is not enough beans. Also thanks for the tip for adjusting the dose! It does save me some beans !!😊

awesome tips, can't wait to setup my Oracle touch from Seattle Coffee Gear👍👍

Thank you very much for sharing this info, greatly appreciated!!!! 🤗

Great tip on changing the dosage! I’ve had the regular Oracle for 10 years and didn’t know this…getting the Touch next week, and we’ll make sure to calibrate that when setting it up!

@op14435

Жыл бұрын

Did you do any adjustments? Did it produce better coffee?

Awesome tips and tricks, thanks!

Thank you so much for this video! I was increasingly needing to use all my strength to get the portafilter on the grouphead. Took less than five nineties to fix it. ❤

Thank you. Very informative

Ty for your clear explanation. I believe newer models now have a magnetic fan that needs to be removed with magnet tool, then inner tip removed and adjusted accordingly. Thanks!

Auch great tips and Tricks! Thanks a lot

this helped a lot, thank you very much. I was struggling with dialing in the machine for a while now and adjusting the tamp fans distance made a world of difference. The other tips were walso sueful, though grinding at 15~20 gives me like 3g out after 30s, I wonder what kind of beans you have that allow for that low of a setting I usually haveto play in the 23~30 range

Great advice & tips , thanks. 👍🇬🇧

Excellent video. I was surprised you didn't mention the burr adjustment under the hopper. I set mine to 4 (factory is 6), I usually run grind between 21 and 24 for my current bean and as low as 17 in the past (if I use filter paper). I do like the dose control you mentioned and may try that. I have just bought the IMS shower screen. I'm on my second Oracle and both suffer from poor first shots, even with the portafilter left in the machine. Hopefully that helps with a better first shot. I was going to buy an IMS precision basket also after seeing some other videos.

Thank you for the awesome review

That first tip is life changing! I was getting 22-23grams with default settings. Now I am at 20.6grams with 4 threads showing. With such a high dose, I had to set grind setting to 26 sometimes up to 36 depending on the coffee. Sometimes I would just weight the desired dose of coffee and throw it in the hopper and just stop the grinder when it starts spinning empty. Now I am getting much better extraction. More tips please!

Amazing video. Thank you.

This was very helpful. I have the earlier non-touch Oracle and this adjustment worked perfectly. After around 6 years of use, I am getting my machine dialed in. Not bad before by the way.

@payannn

21 күн бұрын

Did you went finer grind and less dose ?? Oe coarser with bigger dose??

Awesome video!!

thanks mate, great over view.

Brilliant, thank-you!

Fantastic video! Thank you!

@SeattleCoffeeGear

Ай бұрын

Glad you liked it!

Latest update after receiving my Breville Oracle Touch in September 2021, the connector piece does not need to be "unscrewed" to be removed, but rather pulled out directly. Use the provided magnet in the grind chute brush to remove the tamper fan, reach in to the connector piece and pull it straight out. Do the adjustment exactly as per video (that part does not change). Installation of the connector piece is as simple as push the assembly back onto the shaft in the grinding chamber. Feel for a slight click when the detent on the shaft engages with the ball bearing lock on the connector piece.

@DDDarkz

2 жыл бұрын

Glad I found your comment, got mine a few weeks ago and I can't turn it out like the vid said, lol, now I will go try the pull down version.

@kktmg

2 жыл бұрын

@@DDDarkz Glad that my feedback helped! How's your Oracle Touch so far?

@DDDarkz

2 жыл бұрын

@@kktmg Machine has been great, can't complaint much. I kept seeing ppl commenting this machine as a good entry level machine, so I didn't set high expectation of it. lol

@kktmg

2 жыл бұрын

@@DDDarkz I would look at the Breville Oracle Touch in another way. My skills as a "barista" is definitely nowhere near there yet. The level of assistance that this machine gives me prevent me for screwing up that badly, every morning. Same reason why people start off with point and shoot compact cameras before they go full DSLR. Except for coffee, you start expensive, and then you reach for even more expensive .. hahahahhaha

@yc5878

Жыл бұрын

I have fixed tamping issue on my brand new machine thanks to your comment and this video! My one comes with an instruction book saying rotat it counterclockwise, but doesn't work on my machine. Pulling the connector works!

Really helpful, thank you so much.

@SeattleCoffeeGear

2 ай бұрын

You're very welcome!

thank you great stuff

This was GREAT!!

Nice video fun and informative thank you

Really helpful, thanks

Good video. i had a barista express a dual boiler and an oracle, and now i have owned an oracle touch for 1 year or so... great machines... I would say that, in my opinion, the oracle touch has fewer practical options in the menu settings and while working... just looks fancier but not really big improvements like putting a pressure gauge, a better steam wand regulating the amount of coffee, more consistency on shots ...not to mention on the base oracle you can regulate the steam temperature air pump delay tamp pressure(hidden on the touch version) and many other settings...i know these machines like my pockets 😅

Thank you so much! It’s really my only complaint with the machine so far and now it should be fixed

Hi, I’m using the Oracle, and wondering about this Dose issue. The single shot basket produces a much smaller dose without any “engineering” changes. The double basket that is supplied doses about 22-24g. Would it not be possible to purchase a smaller say 18g basket to make a smaller double dose? Really be interested if you could check out this theory. Thanks for the Great videos

Thanks! This has been very helpful. One thing though, the Oracle Touch comes with a tamper fan remover that uses magnet. It makes it a bit easier.

@DorisR184

3 жыл бұрын

Yes! I struggled for way too long trying to get the fan off before I opened up my manual and realized what I was doing wrong lol 🤦‍♀️

@MarcesAurelius

3 жыл бұрын

MrExitStrategy that is to remove the fan only, leaving the tamper fan connector in place, best method to remove the tamper fan connector is as shown in this video

@DorisR184

3 жыл бұрын

@@MarcesAurelius I couldn't get the fan off using the method in the video. I used the magnet to remove the fan then I pulled down on the fan connector and it came off easily.

@MarcesAurelius

3 жыл бұрын

@@DorisR184 while the fan is magnetically coupled and very easy to remove with provided tool, the fan connector is screwed in, and the fan itself helps as a “tool” to apply leverage to the screwed in fan coupling And yes, I too had lots difficultly with my 5 yo Oracle*, several emails with Breville tech, and finally Breville tech suggested to “quickly flick the fan”, which worked on first try *fyi - Breville amazing replaced my 5 yo Oracle with a new one for free, even paid all shipping! My 5 yo Oracle developed leaks, which on inspection and research was from a Breville tech telling me white vinegar was good to use as a de-scaling solution... it breaks down the seals, primarily on the steam boiler, which I saw for myself when attempting to repair myself

@mikehardcastle4618

3 жыл бұрын

I found on my machine that it’s not more than a single turn on the thread for the adjusted spindle locked it in. Not sure if this is an update I got machine in Jan 21.

Great information -- you know that machine.

thanks for info on popcorning... hoping this is why I'll have a perfect double shot in the afternoon and next morning wife gets 15 ml (she never changes any settings)

great video

what I found - easier to screw the tamper fan's connector in first, without the fan connected, then the tamper fan

Great information and I really love this machine and am getting my mind ready for this purchase

@justicebeaver1882

3 жыл бұрын

Hey Troy, if you’re interested in a slightly used unit (less than 2 months old) and are around the Chicago area, let me know!

@troygreen9321

3 жыл бұрын

@@justicebeaver1882 Hey Mr. Beaver thanks for the offer but I'm in Va.😒

Thanks. How can popcorning effect dose size if the temp fan controls it?

Do you by chance have a video on the difference grams of ground coffee make in a shot of espresso? I’m new to the espresso world and have only had a super automatic before this

Any tips on Upper Bur settings? Sage Support advised me to change it. Now I'm always grinding above the 15-20 range (I'm in the 21 - 24 range and can't recall it's initial setting).

OK Everyone - If you’ve struggle following these (and other video) instructions and have the NEW version of the oracle touch, don’t do what he says as it’s changed. Use the TAMP MAGNET to remove the fan and then just PULL DOWN on the little knob that is left behind. It will pop right out. I turned clockwise and counter clockwise for probably 10 minutes, used wrenches, all to no avail. The new design is different and easier!!

@ystebadvonschlegel3295

2 жыл бұрын

And to reinstall you have to push back in until you feel a little pop as there is a small ball/spring that holds pressure

@sofiawang7312

Жыл бұрын

Omg thank you I knew I wasn’t the only one who can’t get the knob out!

@KallMeKG

10 ай бұрын

Thanks I was trying to unscrew too but you just pull down! I got the oracle touch off Facebook marketplace and only paid 1700

nothing beats the dual boiler!

I wondering about single cup grinding and tamping, how the grinder will know I use the single, which no option for choosing single or double shots ?

Does it matter what size basket is used when adjusting the dose? On my machine if I use a smaller basket it seems to still dose 28 grams no matter what height I set the fan.

how does this work on the non-touch version. My older non-touch has the magnetic fan.. when you pull it out, there is no "stem with set screw".. maybe there is something in the machine that unscrews with the screw?

Hi, I just found your video and I would just like to ask you a few questions if you don’t mind. I want to get an espresso machine. I have narrowed it down to three machines. Can you tell me if there is a big difference other than the touch screen in this machine and the original Oracle without the touch screen. Is it just as easy to make drinks with? The other machine I was considering is the Breville Barista Touch. Any thoughts on that machine? Thank you so much

I have seen so many reviews on KZread incorrectly claiming, you cannot adjust the dosage on a Breville Oracle and Oracle touch. I figured this out when I purchased the machine in 2016. Why didn't Breville include this in the instructions?

@iTubeYourFame

9 ай бұрын

I noticed that this only lets you adjust 1-4 grams if you need more than that you need to replace the basket

Any tips on how to get the best frothy milk ?

Thank you so much for the info on popcorning! Breville needs better instructions - Thanks for filling in the missing info

Hi - Do you know how to get the total coffee count readout on the machine? I am currently looking at used machines and can't see this information displayed anywhere in the menu. Thanks

I have the regular oracle and I’ve been wanting to bring the dosage down since I got it, thank you for finally showing how! Although it didn’t quite have the effect I had hoped, manage to get it down to just above 20 but then I’m almost at the end of the threads. Do you think it’s possible to change the piece out to a longer one to get it down further, or would that risk damaging my machine somehow?

@FlorFreu

3 жыл бұрын

Write Breville if they can send you something

Others have already noted, but the OP should edit his video: use the magnet provided on the cleaner brush to release the fan blade, then simply pull down on the threaded connector. When replacing, be sure to push the threaded connector in until you feel the click. I didn't one time, and so the tamper fan didn't tell the grinder to stop. What a mess! And a waste of beans! Also, the numbers on the grinder are relative. We have two Oracle Touch machines (different locations.) One is set at 24, the other at 14. You can't go with someone else's numbers. Dial your own result. And, yes, my amp goes up to 11!

awsome

The new models have a magnetic tamping blade. Can you just remove that and then does the screw just come off separately? I don't want to force it off and break my machine if it isn't supposed to come off now.

Just bought a Sage (as they are called in the UK) Oracle Touch. The magnet tool pulls the fan off and the spindle then pulls down it’s not screwed in.

@verweydc

3 жыл бұрын

I have a Sage Oracle in the UK. The fan can be removed with the magnetic tool, but that’s only for removing the fan to clean. If you follow the videos guidance, it will unscrew as per the video so you can adjust the fan height. The fan is attached to the ‘bolt/screw’ adjuster magnetically, but the whole unit is screwed in. I just did this 10min ago, and makes a huge difference. Went from 23 grams to 18 grams on my dosage. I’m also using a 15g VST basket in place of the standard basket.

@anthonym1899

3 жыл бұрын

@@verweydc I have also an Oracle touch but it's impossible to unscrew the unit. It's fixed on new version or screwed too hard... its force to the fan engine and turn indefinitely...

@pindajatt730

3 жыл бұрын

@@anthonym1899 same here. It's got a ball bearing fitting that you just pull down on. There's no thread. We must have a newer revised version

@taylorbuckner9553

3 жыл бұрын

@@anthonym1899 same

I am really confused whether I should get this machine or Lelit Mara x & good grinder.. it seems so many problems with this high end machine

for some it can be easier to screw in the tamper-fan-connector first, then snap in the fan which connects magnetically

Thank you. Your videos are extremely helpful. I am a bit frustrated with the Breville Oracle Touch that was delivered the day before yesterday. I am trying to find the correct grind setting for the beans that I am using. These are very fresh espresso beans (Redbird Blue Jaguar), medium roast, and were roasted only 4 days ago. I am using a gram scale to check both the dose used and the weight of the shot that is pulled. I am using all double shots using the default temperature, 30 second etc. etc. I am looking for a brew ratio of around 2. I am now wondering if the unit is defective and needs to be returned for a replacement? Or if I am doing something wrong. I have tried adjusting the grind setting 15 different times and have wasted a lot of good beans ... but that is to be expected. However, what was not expected is how variable the shots are even with the same settings!! The doses have been reasonably consistent in the 20 to 22 gm range. But the shots for the different grind settings have been ridiculously variable. Examples... Grind Setting 30 has yielded shot of 79 gm Grind Setting 28 has yielded shots of 52-gm, 43-gm, 29-gm in 3 different attempts Grind Setting 27 has yielded shots of 28gm-, 24gm-, and 51 gm Grind Setting 26 has yielded shots of 54gm, Grind Setting 25 has yielded shots of 22gm Grind setting 24 has yielded shots of 13 gm When I spoke with Breville “support” the agent told me this was normal and that the machine is designed to yield 2 ounces of volume for a double shot. Not helpful ...clearly not a coffee geek 1. Do you have any suggestions? 2. Should I send the machine back for a replacement? 3. Is there a Forum of Oracle users that you could refer me to so I can post this to perhaps get some insights, suggestions, and comparisons? Thank you. Larry Reinstein

@NickShirrell

2 жыл бұрын

Since no one has replied to you I figured I will. In using my Oracle Touch I found that it can take a few grinds for it to “settle” and that making large changes can make it take a few grinds at a particular setting before it starts consistently yielding the same dose. Either because grounds from the previous setting are still stuck in the grinder or that it just takes a good amount of grinding when it is changed. For instance if I have been getting doses consistently too high (ie 50+g out from 20g in at a grind setting of 33) I will only lower the grind setting by 1 or 2 MAX and not continue lower until I see that the dose is still consistently too high.

Amazon Basic Stainless Steel Electric Coffee Grinder- A Terrific Product

I"m unable to remove the shower screen, the hex screw kind of jammed. Appreciate if you could help. Many thanks.

@Swimmingforlife.

3 жыл бұрын

I hope you have managed to remove the shower screen by now, I live in Scotland but had the Sage Oracle (Breville) in the U.S. When I had my machine the hex screw turned clockwise to unscrew it, I was caught out with this as in the U.K. most screws turn clockwise to tighten. Please don’t be angry with me for answering your question. Kind regards from Scotland. Johnny

What setting do you have the upper burr at?

thanks for posting. BTW, you meant clockwise and counterclockwise, not the other way around, but obvious anyways.

@GregBalzer

3 жыл бұрын

Unless the fan has (everybody’s fear) “reverse” threads, right?

i did what you are saying with adjusting the tamper, but it stills grinds 22 gram regardless of how much i screw on it. what am i doing wrong?

Hi, please would you be able to tell me the height measurements from bottom to the flat area to the right of the grinder so I can see if that part fits under my cabinet? Grind it would fit on the outside area where my cabinets end. Thank you. Len.

@summergajewski9772

2 жыл бұрын

From bottom to top of the bean hopper it’s 45.4cm or 17.87in.

I turn it but it doesnt unscrew: i took the blade off but not the part where i need to use the hex key, any suggestions. Im unable to get that other piece out

Thanks for the tips. So which is better?? Finer and lower dose or coarser with higher dose??? Thank you

@SeattleCoffeeGear

Күн бұрын

Hello! This all depends on your beans and conditions. If your shot is pulling too fast, you'll want to grind finer, if its pulling too slowly, go coarser. Volume is always determined by the ratio you're looking to brew. 2:1 water to coffee is a good place to start with this machine.

Turning the fan doesn't remove it on the new version, on the newer one the fan just pulls off. Adjusting the dose works the same though 👍

Doesnt having the beans in the hopper like that cause the beans to stale quicker?

Hey, I just got mine brand new, if I use fresh dark roasted beans, I'm still having to set the grinder to a 7 or an 8 otherwise I find the shot flows way too fast and overextracts. Am I doing something wrong? I was thinking maybe set the dose higher, but I'm already getting 24g shots.

@mipa940

2 жыл бұрын

I just got mine and have a similar issue. I lower it down to 15 as he mentioned, it is improved but I still get triple the amount in grams in 25s.

@ex0ja

2 жыл бұрын

@@mipa940 I never resolved this, just kept grinding at a really low setting

Wait a minute, does the Oracle have a warm up time? In this video he says 10 mins. I have a Breville Barista Pro and it doesn't have a warm-up time. Oh it's more like a traditional system, where everything heats up (boilders, etc.) unlike the Pro which is fundamentally different? Pros/cons, I guess. Though I do like the speed of the Pro...

If the machine determines dose by checking when the basket is full, wouldn't using a smaller basket result in lower doses?

@nathanhanks4715

2 жыл бұрын

That’s what I did and it seemed to work

Adjusting the tamper to hit 18 grams of coffee into the portafilter will not affect the pressure of the tamper, correct? After adjusting my machine to 18 grams of ground beans at 15 grinder setting, the espresso came out faster, meaning a lot more in the cup with the same amount of time extracting and the taste suffered. So to adjust this I assume to grind at a lower number like 13/14. Is this correct?

@SeattleCoffeeGear

4 ай бұрын

Hi there, that's correct! You'll want a finer grind.

OK, so after realizing you just pull on the fan not screwing etc... I got the 4-5 ridges showing on the little screw piece, but when grinding at 20 (as advised), the machine leaves a terrible tamp... Why is that? I then adjusted the height again back to the original setting and I got a better tamp (still not clean, not flat at all), so how do I get the 18g -20g of coffee and a clean tamp if when I adjust the height I lose the tamp?... HEEEEELLLLP please!

@teewunz

Жыл бұрын

I did exactly as he described and my results were the same as yours. Tamp was all messed up. Best setting while the screw can still lock back in is about 4 threads as he mentioned but it still provides a 20g dose. I cannot get it lower than that no matter what.

Mine is at the max before it falls off, I'm still getting 21g doses

Thank you so much for the info.I have the Breville oracle (not the touch) & I have actually diminish the tamper fan with 4 threads and got 20grs of coffee which sound good result for me.However after few days without changing the coffee beans I started to get soupy puck after brewing the shot. do you have any explanation and how can I fix it. Thanks

@DubaiVoice1

2 жыл бұрын

I am facing the same issue!

@MichaelArthur4eva

2 жыл бұрын

Adjust your grind setting

5:10. It is actually counterclockwise.

I find it easier to screw in the connector then install fan

Hi. After reducing the dose, my Oracle began to tamp badly. The tablet is no longer flat and shows fan marks on it. Help me fix this please. Thanks

@EnderWigginTheThird

2 жыл бұрын

Wet the portafilter basket before putting it in for grinding. Use damp cloth perhaps. It's to prevent the whole coffee puck from spinning in the basket with the tamping blade.

Just bought this machine. Interestingly our method for removing the adjusting piece differs. I couldn't figure out what I was doing wrong based on your description until I came across this video. kzread.info/dash/bejne/aX9_l7KGiciTl5M.html It appears Breville tweaked it at some point. On my machine you have to remove the fan and then pull the adjuster straight down. Also the factory setting yields 21g. Thanks for putting us on the right track with all your tips.

@Etaripamai47

2 жыл бұрын

This 100%. Just got mine and was spinning it like a dummy for 20 minutes.

Not true.. I tried to unwrap that piece.. And it doesn't go undone

Ah yes, dropping the grub screw, classic move I make every time I pull out a screw. . . literally every time. :'-(

I’m surprised Breville didn’t design this machine with a dosing dial / or a setting to change... very strange lol - imagine changing that screw all the time! Hahaha

@MarcesAurelius

3 жыл бұрын

James Robert that would be nice... additionally use a 15g Baristapro basket making a 1:2 to 1:2.5

@29mailman

3 жыл бұрын

Yes and the non-touch oracle lets you change the dose

@MarcesAurelius

3 жыл бұрын

@@29mailman the Oracle Touch doesn’t have an adjustable fan connector to adjust the dose?

@29mailman

3 жыл бұрын

@@MarcesAurelius It does, what I am saying is the non touch version allows you to change the dose via its menu, not by disassembling part of the machine :)

@MarcesAurelius

3 жыл бұрын

@@29mailman please let me know how this is done? I had an Oracle for 5 years and just got a new one 4 months ago... I have not located an added option to control this dose my understanding is the grinder shuts off with the pressure of a full basket is sensed, so FORCE settings only slightly changes does amount, only about a gram

15-20 is like running water out of this machine and these beans are fresher, about 1 month roast date

Nice hire cut Jake

I have this unit... it is giving me 28 grams of grinds so I tried to remove the tamping fan per this video and it doesn't work. It just spins and spins and spins and spins in both directions. I cannot get it out. I am getting horrible extraction because of much coffee is in the Portifilter... I went the reddit and my thread was removed for some reason. I am desperate for a fix because this is currently a $2,500 paper weight with the terrible extraction I am getting

@firstnamelastname2014

3 жыл бұрын

it sounds like maybe the locking hex nut(the one he dropped in the video) is loose allowing the fan to spin freely. try to pull the fan down using a hook or strong magnet. hope this helps

@TyBardy

3 жыл бұрын

@@firstnamelastname2014 I've made every adjustment imaginable. I finally got it to the least amount of grounds it will allow but that is still 22 to 23 grams every time. The only way to get a decent extraction with this much coffee is to increase the coarseness and then extract for about 30 seconds which gives me 3 ounces. But at least this 3 ounces tastes correct. I am a little upset that this machine puts so much coffee in the portafilter.

@firstnamelastname2014

3 жыл бұрын

@@TyBardy it could also be the type of coffee you are using. have you tried a different brand/roast? fresh roasted? this machine also has a secret menu which can adjust tamping pressure as well. if all else fails, shoot an email to Breville and see what they suggest.

@firstnamelastname2014

3 жыл бұрын

forgot to add this tip. adjust the fan to the lowest possible, remove all previous beans, then MEASURE the EXACT amount of coffee you want. im doing 20g. the machine cant grind more coffee than you put in. see if that helps.

@TyBardy

3 жыл бұрын

@@firstnamelastname2014 yea I've used multiple roasts from a few local roasters to starbucks espresso roast to store bought beans.

I would rather buy a Bezzera Duo MN for the same price.

For such an expensive machine Im surprised you have to go through such trouble adjusting the dosage. On the entry level barista express it's just a dial away.

@FirstMM

3 жыл бұрын

No it isn't; you can choose single or double dose and you get what you get. You are probably talking about the ability to change the grind fineness which is also a dial on the side of this machine.

Such a shame that none of these super simple and small trick who make a huge difference, aren't even said in the big useless manual of Breville. Just like upgrading the "shower ring" from cheap plastic which is unacceptable at the machine price, for a stainless steel dispersion shower that's only like 45$ with a 5$ silicon gasket from Cafelat, that alone is gonna make a big difference just like getting a bottomless porterfilter with a (IMS BaristaPro Basket) instead of the crappy one they give. My mom used to have the older non-touch version, worst machine ever but when you know nothing... these tips could have made the machine back then not as bad but now I just got her a (Lelit Bianca V3) which is like 10x better easily, with a (Eureka Oro) grinder that's 200x better than the built-in trash from Breville. I'll foward that video to my cosin who still have that machine, as it's very good tips he prolly didn't know neither. Thanks!

@80krzemo

Жыл бұрын

Which size of IMS BaristaPro Basket do you prefer to bottomless portafilter in your case?

I fo

The instructions to remove the ramp fan, at least for my Oracle Touch, are wrong. Remove the fan with the magnet and then just pull straight down on the connector to remove it. Spinning it around does nothing.

Everything is good about this machine except the grinder

@speaknup8009

3 жыл бұрын

Agreed! The best tip and trick for this espresso machine is to abandon use of its built-in grinder and instead, buy and use a separate, quality, stand-alone grinder. That, and always weight your shots because they will vary. There's no such thing as a set and forget grind setting and unless you weigh your shots, you have no idea whether the grind is correctly set.