My friend I just wanted to say that you’re a genius and a very hard worker. Here in the United States where these cars are common you would make a very good living selling this things on the side. Good job on the work. You did great!!

@_demon1k_

4 ай бұрын

Thank you for such an appreciation of my work

Need to get some Rust prevention spray going on there my man. If you plan on keeping it of course, but yeah those 6 Pot Brembos just transform the cars spotting power....Need to get my Brakes done in another week or two pending my mechanic lol.

@_demon1k_

Жыл бұрын

Of course, but I plan to make a new set of transition plates with anodizing, without a protective coating the aluminum parts won't live long. Power brakes are probably the best upgrade for the car, I enjoy it every time I drive

Man your a Legend for this.

@_demon1k_

Жыл бұрын

Thanks bro, I will be glad if my video helps you and others to improve car brakes

Outstanding work. You should be selling these.

@_demon1k_

5 ай бұрын

Thanks

@jeremymcclain891

4 ай бұрын

What are they? I have a 2006 dodge magnum srt8 and just got 2016 hellcat 6 piston calipers and 2 piece rotors. Could I use this product? It looks just like yours.

@_demon1k_

4 ай бұрын

@@jeremymcclain891 If you have the magnum version of the srt8, you don't need additional adapters, you already have the srt front steering knuckles that the 6 piston calipers from hellcat mount to

Круто огонь

So i have a 2015 rt i want to do a conversion like this what’s the disk that you say infront of the rotor and where can i get the bracket adapters like that so i can fit the front calipers on?

@_demon1k_

Жыл бұрын

To install such a set you need: front brake disc from Hellcat 390/34mm, brake calipers Brembo GT series with guides and shoe stop plate, pads from Hellcat, brake hoses to the caliper from Hellcat or 392 and the adapter plate. You can't buy a ready made plate right now. I can only help with a 3D model or drawing for you to make it in your country on a milling machine or CNC machine

Outstanding work! I have a 2016 Challenger R/T, RWD with Scat Pack package and 4 piston Brembo brakes and want to upgrade to a 6 piston Brembo kit. Brembo tech support said it will not fit. The brackets in this video would help to install the 6 piston Brembo kit? If, yes, I am interested in the blue prints of the brackets. Thank you for your help.

@_demon1k_

3 ай бұрын

If you have 4 piston brembo calipers, you don't need adapters because you have SRT knuckles. Just buy 6-piston calipers and hellcat brake disks.

@christianhardwick6530

6 күн бұрын

$1340 for rotors.

@_demon1k_

6 күн бұрын

@@christianhardwick6530 price depends on the supplier and condition, this price is for new, but you can always buy used in excellent condition for half price or even cheaper. But the point is that the difference in braking is enormous, they are worth their money

My 2019 RT Daytona came with them I thought Daytonas came with brembos but I guess not. Dealer add on when it’s a 5.7?

@_demon1k_

5 ай бұрын

Yes, on all v8 you can add the performance brake package as an option and then you have brakes like a hellcat

Man great video. Do yo sell them Caliper adapters i need a pair asap.

@_demon1k_

Ай бұрын

I don’t sell ready-made adapters, I can only sell a 3d model for manufacturing in your city

@345Jo

Ай бұрын

@@_demon1k_how much for the 3d model?

@_demon1k_

Ай бұрын

@@345Jo The cost of the model is 50€=55$=75CA$

Please explain to me what I need to do mine. Its a 2017 RT. I’d really appreciate it

@_demon1k_

9 ай бұрын

The adapter presented in the video is intended for models with non-SRT steering knuckles and rear-wheel drive from 2014. I also have an adapter for models with all-wheel drive, it is different. To install these or similar brakes you will need: - 4, 6 or 8 piston calipers of the Brembo GT series with pad guides and a pressure plate; - brake pads from hellcat (any company you like) - brake discs from hellcat - flexible brake hoses from hellcat or I would recommend reinforced ones from Stoptech or Goodridge - make an adapter according to my 3D model on a milling or CNC machine in any parts manufacturing workshop in your city.

Hi , it’s possible contact with you for this thing but just for the 4 piston calipers??

@_demon1k_

Жыл бұрын

Hi, send me a message on instagram and attach a photo of the calipers you want to install

Как с расчётом металла на прочность? Делали какой то тест? Как он выдержит суровую жизнь тормозной системы? Если ошибиться в расчётах можно дорого заплатить. Тормозная система это одна из тех с которой не то что семь раз отмерь один раз режь. Просчитывали все? Видос огонь, не вижу смысла ставить рычаги от срт если можно с переходника поставить любой суппорт. ❤

@_demon1k_

Жыл бұрын

Да, производилась проверка на прочность (изгибающее усилие, крутящий момент и ударную нагрузку) переходной пластины, в соответствии с нагрузками был выбран материал изготовления и толщины элементов. Этот вариант (на видео) переходной пластины имеет слишком большой запас прочности и соответственно лишний вес поэтому позже будет облегченный вариант.

@apesintanks162

Жыл бұрын

@@_demon1k_ браво. Это шедевр. 👍👍👍👍

only site ik that sells these are for 600 front 600 in the back

@_demon1k_

9 ай бұрын

Brembo GT series in Ukraine at the official suppliers costs $ 600 for one caliper without pads, guide pads and pressure plate. Since this series of brakes is relatively new on the sites are sold only sets with brake discs, hoses, pads, etc. at a price of 7k-8k$. But kits for Challenger have maximum 380mm brake disc and unreasonably expensive price. You need to order calipers, pad guides and pad pressure plates as spare parts from an official representative or dealer in your country, then the price will be adequate. Also it is not necessary to use this series of calipers, you can choose almost any brembo caliper suitable for brake discs 390mm and more. All prices are for new parts, if you buy used, the price will be much cheaper

Can we buy these brackets or did you have them made ? And what caliper is that from scat?

@_demon1k_

4 ай бұрын

I can sell 3D model or blueprints to make the adapter. The adapter can be made on any CNC or milling machine in your city. I used new generation Brembo GT series calipers with radial mounts. You can buy them from a Brembo dealer: www.brembo.com/en/car/sporting-use/gt-braking-systems

hey man, I've been looking for something like this for a long time. Can I please get the bracket file from you? I have a 2015 RT challenger and I am looking to upgrade the front brakes. thanks

@_demon1k_

6 ай бұрын

wrote a reply on instagram

I just bought the srt-8 4 piston set up for my 2015 rt Would you by chance know the measurements for that ? Because I’ve been looking everywhere and cant find a bracket system for them

@_demon1k_

Жыл бұрын

Yes, I know this brake system, it's called BR4 with good brake calipers but weak brake discs, they are 360/32mm. You will need SRT rotary knuckles to install them, as these calipers have "ears" for side mounting, and the brake disc diameter is almost the same as the RT brake disc (345/28mm).

@CrazyBigLuu

Жыл бұрын

@@_demon1k_ ok so a bracket wouldnt work for me and i actually have to get the knuckles . good to know , do you by chance know what years are compatible , because i think these were from a Chrysler srt-8 and i have the newer 2015 rt not sure if it will be a direct bolt on

@_demon1k_

Жыл бұрын

@@CrazyBigLuu The SRT8 knuckles were the same on all models of the Chrysler family (Chrysler 300C, Challenger, Charger) but you only need the SRT knuckles from models manufactured after 2008, the earlier knuckles will not fit your 2015 R/T

@CastroLTZ71

6 ай бұрын

So 2008+ srt model spindles work with the 15+ style ? I did not know that.

Sir how much do you charge for this bracket??? I can’t justify spending I shit ton spindles

@_demon1k_

9 ай бұрын

Right now I'm only selling 3D models for making adapters for GT series brembo calipers or similar radial mount calipers. The price and how you can buy a model in any convenient format for you I can send you in private messages in instagram. The price of making the adapter depends on the price of material and the price of work in your city - usually it is 100-300$

I have a Dodge Durango 2015 RT 5.7 V8 and I want to installed the brembo caliper with the bracket where I can buy the same you installed in the video. My car is a rear traction . Thank you

@_demon1k_

4 ай бұрын

I need to understand what kind of steering knuckle is used on your car, if the same as on a rear wheel drive Challenger or Charger then my adapter will work for you and I can sell you a 3d model or drawings for fabrication. If you are using a different knuckle then you will need to design a different adapter, but I don't have data on the Durango range of knuckles at this time.

@JulioHernandez-zx1sv

4 ай бұрын

I have a charger 6 Piston front caliper for my Dodge Durango RT V8 2015 5.7 and my knuckle number is PSA46700. I want to adapt that brembo calipers to my Durango you think that is possible. Thank you for your help.

@_demon1k_

4 ай бұрын

@@JulioHernandez-zx1sv There is not much place to mount the hellcat caliper to the steering knuckle via an adapter, as the hellcat caliper is laterally mounted to the steering knuckle . So I used a caliper with a radial mount so that an adapter of sufficient strength could be made. In your case, it would be easiest to mount the caliper without an adapter to the steering knuckle and use a two-piece brake disc like on a Charger or Challenger Hellcat, but fabricate a new center section to fit the required caliper outreach. I think that would be the easiest way to install these calipers.

Do u Sell 2 of These Adapters? I have a 2012er r/t, and want 4-6 piston calipers…. But its impossible to get srt knuckle in Germany … if u Sell These Adapters…. Which calipers i will need? Great work btw!❤

@_demon1k_

4 ай бұрын

I can sell you a 3D model of the adapter and you make it in your city on any milling or CNC machine. You will need Brembo GT calipers 6 or 8 piston calipers for 380-410mm/34mm brake disk (for today it is the newest model) or any available in your country Brembo calipers with radial mount for such disk, for example from Audi, Porsche, Mercedes or Bmw.

@dominikgsell469

4 ай бұрын

@@_demon1k_ what do you want for this? The idea with Porsche calipers Sounds wonderful, i only have to Look what Modell These calipers use (have no idea of Porsche 😌) are the screw holes of all brembo caliper are the same ?

@_demon1k_

3 ай бұрын

@@dominikgsell469 For example, calipers like the ones in the photo forums.quattroworld.com/rs4b7/msgs/98644.phtml It is important that they can be installed on large brake disks, because the disk from the hellcat is 390/34mm. It is important that the mounting holes are 200mm and the distance from the holes to the caliper axle is 55mm I used this caliper, its price in Europe is 450 euros a piece www.brembo.com/en/car/sporting-use/gt-braking-systems

@_demon1k_

3 ай бұрын

@@dominikgsell469 For 3D model cost, write me on instagram or better yet email me at slepushkin.oleg@gmail.com I will need to understand in what format you will need the model or drawings

@dominikgsell469

3 ай бұрын

@@_demon1k_ ok i will thx :-)

can you make me these adapters? i’d gladly pay for this asap

@_demon1k_

10 ай бұрын

I can sell you a 3d model or drawing for fabrication on any CNC or milling machine in your city. I can also develop an adapter for your existing components. Write me a message on instagram

Where can I find this bracket and would it work with the 4 pistons as well

@_demon1k_

Жыл бұрын

This bracket I designed for the new model 6-pistons caliper Brembo GT with radial mounting and a brake disk from Hellcat 390 to 34mm. The bracket was made from a my 3d model on a milling machine. If you want to use a 4-piston caliper from the SRT8 or R/T392 models this will not work, the caliper is mounted through the ears and has a 360 to 32mm brake disc, these discs also overheat if the brake is used intensively. I would recommend you to use a 4, 6 or 8-pistons caliper with radial mounting and minimum 390 to 34mm brake discs from Hellcat, then this bracket will fit and I can send you a model or help you develop a suitable bracket.

@kevindavis5311

Жыл бұрын

@@_demon1k_ this is what I need! Where can I get a bracket for 6 piston from?

@_demon1k_

Жыл бұрын

​@@kevindavis5311 The first thing you need to know, because you have a caliper on the AWD side of the bumper and the RWD it is on the door side, you need other calipers, as 6-piston calipers have different piston size from small to large and this change must be in the direction of rotation of the wheel when driving forward

Is there anyway I can contact you for your that CAD file, I believe I have the means to cnc the aluminum part

@_demon1k_

Жыл бұрын

Sure, email me on instagram and we'll discuss in what format a 3D model or drawing is needed.

@ODDfutureALLday1

Жыл бұрын

What is your instagram?

@_demon1k_

Жыл бұрын

@@ODDfutureALLday1 The same as the nickname of the channel @_demon1k_

Hey I just bought 4 piston brembos for my 2019 dodge charger RT what else do I need to install ?

@_demon1k_

Жыл бұрын

What kind of 4-piston calipers did you buy? If from the 392 version, then also the steering knuckles srt, brake rotors and hoses for this set

@user-dm1mm6ou1c

11 ай бұрын

@@_demon1k_hey there i also got brembo gt series 4 with 14 inch 2 pieces cross drilled rotors. is this gone be a drop in installation or i need other stuff

@_demon1k_

11 ай бұрын

@@user-dm1mm6ou1c This adapter will fit a 4-piston caliper but it needs to be modified for a 14" brake disk because it is designed for 390mm (15.35") and the thickness of the disk is also important.

Where is this whole kit available?

@_demon1k_

Жыл бұрын

Right now, you can't buy a ready-made kit. But you can assemble it yourself, there's nothing complicated about it.

so hellcat brakes would fit on my RT with the bracket?

@_demon1k_

6 ай бұрын

No, hellcat calipers can be installed on RT only with SRT knuckles, because hellcat calipers are side mount (end mount). The adapter is designed to fit Brembo radial mount calipers without replacing the knuckles on RT, SXT, GT models

So with this method, you didn’t have to change your knuckle spindle?

@_demon1k_

Жыл бұрын

No, I did not change the knuckle, its price compared to making an adapter plate for the caliper with radial mounting is much higher

@jason305dallascowboysfan8

Жыл бұрын

@@_demon1k_ are you in the US, do you make and sell them

@_demon1k_

Жыл бұрын

@@jason305dallascowboysfan8 Now I am in Ukraine and can not send ready-made adapter plates. If you have the opportunity to make I can help with drawings or 3D model

@jason305dallascowboysfan8

Жыл бұрын

@@_demon1k_ ok. Man you can make lots of money if you was in the USA

What I need for my 8 pistons breaks I have a 2023 challenger rt

@_demon1k_

12 күн бұрын

If these calipers have a radial mount and the same parameters from the mount to the center of the caliper, adapter will definitely work for you

@KamGlobaI

12 күн бұрын

@@_demon1k_ I’m sorry about that I meant 6 pistons and I have the rotors that goes with them and break line

@_demon1k_

11 күн бұрын

@@KamGlobaI If you're talking about the 6 piston hellcat calipers you only need the srt steering knuckles, otherwise you can't install them, there is no adapter for those calipers

is there a way i can purchase front and rear set?

@_demon1k_

Жыл бұрын

Right now, I'm not yet selling finished kits because I've only developed a mount for the front calipers for a Hellcat 390/34 brake disc.

@kevindavis5311

Жыл бұрын

Is there anyway I can purchase the front set? I did a whole rear conversion for knuckle and it fits good just this AWD RT is rough for the front.

@_demon1k_

Жыл бұрын

@@kevindavis5311 Right now, I don't sell ready made caliper adapters, I can only help with a 3d model or blueprints to make them. These adapter plates are designed for RWD, I'm not sure if they will work for AWD because the knuckles and wheel hubs are different, so the 3d model needs to be adjusted to fit on AWD

@_demon1k_

Жыл бұрын

@@kevindavis5311 Yes, for the rear suspension, the easiest solution is to replace the knuckles and install calipers from the SRT version

bro how do i get that bracket

@_demon1k_

Ай бұрын

I don’t sell ready-made adapters, I can only sell a 3d model for manufacturing in your city

How much would you charge me to draw a plate?

@_demon1k_

8 ай бұрын

write me a message on Instagram (instagram.com/_demon1k_/) or email (slepushkin.oleg@gmail.com)

@ItsMLorenzo

8 ай бұрын

@@_demon1k_did you make a new ig account?

How can I purchase front set?

@_demon1k_

Жыл бұрын

You can assemble all the components yourself, if you need help I can tell you what you need to buy. The only problem you may have is making the adapter plate, you need to find a company that makes parts from 3d model

@kevindavis5311

Жыл бұрын

Ok great! I have a 2014 Dodge Charger AWD RT with 2018 Hellcat Rotors and Calipers. Everything is slightly off.

@kevindavis5311

Жыл бұрын

Seems like 1/4”

@_demon1k_

Жыл бұрын

@@kevindavis5311 I take it that you have already bought the hellcat calipers? If so, there will be difficulties with installing them, as the hellcat calipers are attached via side mounts that only fit the SRT knuckles. I'm not sure they will fit on your AWD. Can you take measurements of the knuckle and caliper so I can try to design an adapter plate?

@kevindavis5311

Жыл бұрын

@@_demon1k_ if you like u can email me and I can send the Hellcat knuckle and SRT knuckle that I currently am using that will not work for measurements. Once bolted the rotor is touching the caliper

hello mate, i will drop u an email soon

What’s your email need that asap

@_demon1k_

Жыл бұрын

slepushkin.oleg@gmail.com