Brembo caliper install!!8th gen civic si/Acura tl type s brembo
Hey welcome back to my channel.in today’s video I installed Acura TL type s oem brembo calipers on my civic si.
Things you need for this conversion
1.Acura tl type s calipers
2.Acura tl type s brake pads
3.a 9/16 drill bit
4.new caliper bolts
5. Stainless steel brake lines
6.aerogenics 5mm hub centric shim
7.dot 3 or dot 4 brake fluid
8.clear hose to bleed the brakes
9. Also you need rotors from the Acura TL type s size 310mm
That’s all you need for this conversion I hope this video was helpful for people that are looking to do this conversion.the new brembo calipers feel amazing 4 piston makes a huge difference than a single piston calipers.I hope you enjoyed this video I will see you guys in the next video thank you for watching have a great day
Пікірлер: 60
Fire video bro super informative
🔥🔥🔥
@kingsuper9199
3 жыл бұрын
Thank you bro 🙏🏽💪🏽
🔥🔥🔥🔥🔥🔥
@kingsuper9199
3 жыл бұрын
Thank you bro 💪🏽🙏🏽
Wheels size 👌
@nasarethportillo3066
2 жыл бұрын
? Thanks
I have a question dont have to upgrade the master cylinder to the civic ?
what size spacer you use for the wheels
Isn’t the discs have to have have the ventilation lines facing forward??
Can you show me all links of parts you bought, please?
Does the brake pedal good feel good or it down then before
sweet video, just wanted to ask.....according to aerogenics website, the new rotors bore needs to be resized, did you do that prior to installation?? also they claim you need extended wheel studs, i didn't see you install any on the video, was that also done prior??
Hey man nice vid! Can you give the link where you got your spacers? And do they sit flush behind the tl type s rotors or you needed to shave them to fit. Thanks man!
@kingsuper9199
3 жыл бұрын
Hey thank you for watching.aerogenicsusa.com/collections/2006-2011-honda-civic/products/tl-s-brembo-kit-adapter-only...yes I did have to get the rotors Machined to fit the rotors with the spacer so it could sit flush and still be hub centric. If you have any other questions you could hit me up on ig:kin9_super
What size wheels you got
I enjoyed this video because I really do want to upgrade my calipers on my 8th gen bro but my question is can i get the link to the spacers please and did you have to buy longer studs?
@kingsuper9199
3 жыл бұрын
hey thank for watching my video.these calipers make a huge difference,you wan the link for the spacers that goes behind the rotor?and no I didn't need longer studs because I had a wheels spacer so it wasn't needed.if you have any questions you can hit me up on ig:kin9_super
Are you still using the stock master cylinder
Can you put the link for the pads
Idol hom many mm that big rotor?
Very nice job!I got the same car (eu) model ,dc5 brembo calipers and ep3 (eu) oem 17" wheels 7j wide.i didn't try to put it on the calipers because i don't know if they fit easy.You think that i will need spacers?
@onfirettv
8 ай бұрын
Yeh u need a 3 inch spacer
Yo will stock k20z3 stock brake lines fit?
What color is that
What are your wheel specs & offset? What tires specs will you be using?
@ToxicPs5
Жыл бұрын
Looks like 225’s
wait that rotors did you buy?
What happen if you use stock fa5 brake master cylinder? Its not gonna work?
@kingsuper9199
2 ай бұрын
Hey thank you for watching.the stock one wouldn’t work the brakes would be super spongy and they won’t work right
What tire size did you use to fit the rpf1s with the 25mm spacer? Thanks in advance
@kingsuper9199
3 жыл бұрын
Hey thank you for watching.the Rpf were size 17x9 +45 with 255/40/17 tires
@bustacrit
3 жыл бұрын
@@kingsuper9199 does it rub with the 255?
Wheel spec?
Looking good. What are the wheels offset and how much mm spacer are these ? I'm going to do this with +60 offset not sure how much mm i need to get ?
@kingsuper9199
2 ай бұрын
Hey thank you for watching.they were 17x9 +45 with a 1 inch spacer.you might need like 1.5 inch spacer or 2 inch
@boshanan1
2 ай бұрын
With 60+ offset I needed 25mm to clear perfectly.
@kingsuper9199
2 ай бұрын
That’s better how do you like your bbk kit?
Did you change brake master cylinder ?
@kingsuper9199
Жыл бұрын
Hey thank you for watching.yes I did tl type s brake master cylinder
Where did you buy the calipers. Can’t find Brembos anywhere
@kingsuper9199
3 жыл бұрын
Hey thank for watching.they are getting type hard to find them.I bought them from eBay you can check there they might have som prices have gone up on them
@RiQWitDaBliQ
2 жыл бұрын
@@kingsuper9199 do you know if this same drilling could be done for a tsx ?
You think a 18x9 35 offset will clear?
@ITSMINECRAFTTIME32
3 жыл бұрын
Nope I have a TL with brembos only wheel 18x9 that I fit was +20 and it barely cleared.
@kingsuper9199
3 жыл бұрын
Hey thank you for watching.they might not work also it depends on the wheels you got.my rpf1 were 17x9 +45 with a 25mm spacer so that made it a 20 offset
Do I need Acura TL type s rotors or I can use the civic si ones?
@brayancortez3212
2 жыл бұрын
@Cruz Ponce whic spacers u use?
Why used spacers for the rotors?
@kingsuper9199
Жыл бұрын
Hey thank you for watching.the spacers is needed to behind the rotor because then I wont a line with the brake pads it need even space
@kjcustomsauto
Жыл бұрын
@KING SUPER oh ok thanks for responding bro 👍
@krustycream2012
Жыл бұрын
You can machine the caliper bolt mount and trim off 5mm and should work perfectly fine, should be cheaper as well than buying the spacer.
What wheel specs will clear the calipers?
@kingsuper9199
3 жыл бұрын
daniel montoya hey thank you for watching my video.I believe that 17x9 with offset anything under 22 I believe not to sure my rpf1 were 17x9 +45 with a 25mm spacer so it made it around +20 offset
@danielmontoya925
3 жыл бұрын
@@kingsuper9199 so would a +22 fit?
@kingsuper9199
3 жыл бұрын
Yeah they might fit it also depends of the wheels but I seen people with Rpf1 17x9 +22 with like a 3mm spacer
@danielmontoya925
3 жыл бұрын
@@kingsuper9199 oh sweet thanks for getting back to me
@kingsuper9199
3 жыл бұрын
No problem if you got any other questions you can hit me up on ig:kin9_super
any website so i can order those brembo
@kingsuper9199
Жыл бұрын
Hey thank you for watching.yes dc5creations on ig