I want to connect my TV via the HDMI cable and I will use the optical digital outputs for my active speaker. However, I want to know if the application and settings have an equalization option for films and series. As my speaker is flat and does not have defined equalizations, there are times when some films have low voices and dialogue and explosions and loud music, is there any pre-defined voice or dialogue or film equalization that will help me?

Espieza muy dificil por cabeza

I am on my 3rd Arylic BP50 and they all are doing the same thing. Randomly no sound so I have to rest or turn off and back on then it is fine. Just never know when it will cut off sound. Funny thing the sub out still works when the sound goes out. Any Ideas ? This happens on all outputs.

@Arylic

5 ай бұрын

Hi Sir, please check if the cable is connect well or not. If the connection is good, please contact us by mail, our tech support will help you figure out the issue.

Hi! If I plug in a Chromecast Ultra in the HDMI port, will it allow me to listen to music being casted to the Chromecast?

@Arylic

5 ай бұрын

Hi Sir, you can check is Chromecast Ultra support to output PCM format. If yes, it may be available.

I am using a HP laptop I5 as source. HDMI out to tv HDMI in (non-smart tv). The Arylic connects from laptop by a USB C port to PC input on Arylic and Shows on unit display as DAC.

@arylic can i plug turntable into unit and out to passive speakers?

@Arylic

5 ай бұрын

Hi Michael, for this you can check B50: www.arylic.com/products/b50-bluetooth-stereo-amplifier . You may need an amplifier to connect to your passive speaker. BP50 is a preamp. Both B50 and BP50 have phono input, so B50 may be your better option!😁😁

How to Import REW Filter Sets Into acrylic bp50?

@Arylic

5 ай бұрын

Hi Sir, I think you mean the audio effect settings in ACPWorkbench tuing tool? Or you mean the EQ settings in GO CONTROL APP? You can save directly from GO CONTROL APP or use ACPWorkbench tuning tool, the save button is on the bottom right. And we are "Arylic" ! LOL...😂

@avia4281

5 ай бұрын

@@Arylic IM interested in a video tutorial from REW mic measuring to ACPWorkbench tuing tool. Thankyou.

can i adjust the volume thru the pre amp while using airpods?

@Arylic

10 ай бұрын

Yes, you can only do the volume control on our preamp. With the Volume knob, GO Control App or remote control. Base on your preference.

Hi. The subwoofer output is using RCA or coaxial? Analogue or digital?

@Arylic

10 ай бұрын

It is analogue output.

@dionisiocapois1318

9 ай бұрын

​@@Arylic k. .

can i connect with my airpods with the bluetooth?

@Arylic

10 ай бұрын

Of course😁😁 check this #shorts kzread.infoNSEq_IrHkFo?si=O7aS6zpiOf1iqX36 we use Airpods for example.

Does this allows control of the TV audio via HDMIarc through the TV remote?

@Arylic

10 ай бұрын

Yes:) we support CEC of volume and power on/off sync.

@Brazil10-xv9lc

7 ай бұрын

​@@Arylicض٢

Does it decode MQA?

@Arylic

10 ай бұрын

Support decoding but the output quality is 48kHZ/16bits.

@RickPollux

10 ай бұрын

To bad, It would be perfect if it could decode in full quality so we can listen to Tidal Masters in the livingroom.

Does the unit display the volume? Or do you have to check in the app?

@Arylic

8 ай бұрын

There is no display on the device, only LED indicator on the front panel. The volume is same with your play source like your phone, or you also can check the volume in our GO CONTROL APP.

É

Iisto