Our European Andrew Camarata

@boydmbangweta4784

6 ай бұрын

Hi Andrew Camarata fun?😂😂

@petrophaga8523

6 ай бұрын

I love Andrews videos, but this seems way more safe and professional. For instance: i would never buy any of Andrews "fixed" stuff

@glennbrown1961

6 ай бұрын

Hope he is not as rough on equipment as Andrew. He gets the job done no doubt but he could look after his stuff better. Not everything is built Andrew proof although some manufacturers could use him for testing if gear is strong enough for market!

@camelblue713

6 ай бұрын

Broke for no reason

@christianpierretrassard2376

5 ай бұрын

55

You and Andrew Camarata are by far the best youtubers on this niche right now! Love it!

@gnillut

6 ай бұрын

Diesel creek is up there as well. This guy is from Sweden though, deffo nr 1 :)

@tonyk0756

6 ай бұрын

FarmCraft101 is another one who gets up to interesting stuff

@TheGrimReaper1

6 ай бұрын

Aye and don’t forget Marty T from the south island .

@AW-Services

6 ай бұрын

Don't forget Donn DIY & Jesse Muller

@Bannimann2

6 ай бұрын

@@gnillut Diesel Creek - the guy that hardly never finish a project. lol He's all pumped up in the beginning, but he runs out of steam very fast, and then the "project at hand will be parked to rot in the woods like so many other "projects"

Both the breakers and the rock drill require an inline oiler using rock drill oil to keep them lubricated. You can also just squirt a little oil into the air inlet every few minutes. They are pretty simple to take apart clean and inspect. Anyone who is brave enough to repair a injector governor won't have any problem with this. I love your channel.

@M.BJOERNSTROEM

6 ай бұрын

Thank you, i actually do have an inline oiler for this i'm going to use.

@carlthor91

6 ай бұрын

@@M.BJOERNSTROEM Yep, North American miners refer to them as a football style oiler (Gardner Denver football). As they are shaped like a football, (think rugby ball, not soccer ball). Also double hose clamps per air fitting, preferably stainless punch locks, and whip checks, as one of the other commenters has posted.

@iaam117

6 ай бұрын

Chuck James from California?

@100gpdriver

6 ай бұрын

"An "

For me, it’s you and Andrew Camarata that are most enjoyable to watch on KZread. Keep it up brother 👍

@benwinstanley101

6 ай бұрын

This channel and Marty t

@timchiakress5271

6 ай бұрын

@@benwinstanley101 I like Marty’s channel too 👍

@timchiakress5271

6 ай бұрын

Ok, gotta also call out Cutting Edge Engineering Australia too. Good stuff on all four channels.

@benwinstanley101

6 ай бұрын

@@timchiakress5271 we’ll said ! 👍🤝

AMA kompressor. Norwegian manufactured compressor ordered and sold to the Swedish military and that's why the labels are in Swedish. (green inside)

Hello from the states, I work in the power generation field. On a generator with a mechanical governor, the frequency needs to be set to roughly 2.5 to 3 hz above your nominal frequency. Which in your case is 50 hz. The frequency will drop within the nominal range when generator is loaded to 80% or more. Hope this explanation helps. Peace.

Sir I have no idea about generators or compressors, but I have just watched you yet again solve all your problems. You have made a 70 year old woman happy 😊😊😊😊. Keep videos coming.

1:31:25 I am pretty sure that finnish road maintenance people will take notes from this how to create even bigger potholes.

Nearly 2 hours. Yes!! I'll save this one for tonight when the kids goto bed. Cheers 🏴󠁧󠁢󠁳󠁣󠁴󠁿🏴󠁧󠁢󠁳󠁣󠁴󠁿🏴󠁧󠁢󠁳󠁣󠁴󠁿

I would never compare Camarata to this guy. Camarata is good for watching on KZread but can probably not spell OSHA. This guy, yes he is entertaining and skilled in what he does. And he is sense, even has common sense. This guy I love watching, as I do Camarata, but this guy I would also hire to work in my shop…if I had a shop. I trust this guy.

I did not laugh when the oil spilled on the floor. I swear. Keep the vids coming. Good stuff.

This channel should have a million subscribers 👏🏻👏🏻👏🏻

Never have I been so excited to see a new video from someone on KZread. I've watched all yours multiple times... Outstanding!

@M.BJOERNSTROEM

6 ай бұрын

Oh, thank you. Good to hear!

White wheel rims and new stack make this compressor a real beast

I really enjoy your videos and comparing slight differences how you do things and how we do things in the US. Im from Minnesota and run a small excavation business. Doing the work can be plenty difficult I couldn’t imagine recording and editing it on top of things. Keep up the great work!

@urbankotto9685

6 ай бұрын

I can see by your lastname that you are Skandinavian.And most Skandinavian moved to Minnesota.Karl pålsson,Carl paulsen.You should change to 220 V it is better then 110 V.

@londen3547

6 ай бұрын

@@urbankotto9685 In the US both 110 and 220 volts are present in the service panel. 220 volt wiring in a typical home is well pump, dryer, range, in-floor heating and possibly a water heater. A shop might have 220 volt outlets for welders, heaters, planers.

@carlthor91

6 ай бұрын

@@urbankotto9685For movement of Baltic group. Think of extending the top width of Minnesota, straight North into Ontario and Manitoba. My grand parents immigrated to NW Ontario. Then to SE Manitoba. The area I grew up in in Manitoba had mostly Baltic Country immigrants. Best wishes from Northern Manitoba.

@urbankotto9685

6 ай бұрын

Carl=karl=Man.Thor=Tor,the god ,Tor.Baltic sea is on our doorstep and not that far away is our neibours.Estonia,Latvia and Lituania.The baltic contrys.Sweden and Finland,over and out.@@carlthor91

@nilsgjefsjo

6 ай бұрын

@@londen3547sounds horrible to use 110, all that amperage… life is good with 400/230!!

We sent down a generator similar to this one to Ukraine (from Sweden), works great from what i have heard. Now it is a backup at a field hospital.

@frank-t6857

6 ай бұрын

Thank you for the contribution to Ukraine ❤️

A good generator is equipped with an isochronous governor. The isochronous governor controls the rpm, and keeps it steady, no matter what the load on the generator is. Otherwise you will need to adjust the rpm's to maintain the 50 HZ desired depending on the load. Either way you got a great deal on both pieces of equipment.

this channel should have waaay more subscribers!!

When the oil missed the bucket I shouted but you didn’t hear me 😉

@EWasteJILL

6 ай бұрын

I LOL when oil missed bucket 😂 it's what cat litter is really for.

MM77 Approved 👍🏻👍🏻………………………………….I really enjoyed this video. I like how you think, sometimes cool and practical go hand in hand. The bigger pipe with the cool flapper was the right choice! LOL

tech tip,pump up the tyre with it still jacked up LOL

love the channel mate! Big ups from Australia

I like your videos so much! Miss my time in Sweden back when I worked with CNC machining. Greetings from Ukraine!

@bobbruin44

6 ай бұрын

Keep your head down brother

Any one who likes Andrew Camarata will love this channel. You have a lot of common sense, and you're not afraid to handle a project that you have limited knowledge on. Your content is diverse and fun to watch. You would make a great maintenance technician in the petroleum/gas or heavy production industry, which is what I retired from as a Maint. Electrical and Mech. Tech. Don't know much about your back story, but it seems like you are already successful in mining and processing rock.

@skycarp2002

6 ай бұрын

This guy respects his equipment, unlike AC.

@pcmiller2710

6 ай бұрын

You definitely have a valid point there!

@Spitter-ud8jd

6 ай бұрын

Comparing him to AC is like comparing a Rocket Scientist to a Kindergartener🍻.

@troyfortune4124

6 ай бұрын

I don’t see this guy taking a chainsaw to his dash for a radio install but I dig what your saying. Been a long time Andrew fan but he can be reckless at times. This dude seems a little more thorough.

@ZacharyCillo

6 ай бұрын

Yes totally agree, I like this channel because he is based in europe so I was interested in the video where he bought that 6x2 volvo hooklift which prompted me to watch his other videos ,so yes great channel and definately like AC too.

you got a hell of a deal on both of them.

Another great video. Glad to see that you still have two feet after the drill bounced around like that ! 😂

Great watching you at work you now have a new fan Thank you keep them coming

A Swedish Andrew Camarata !! I love it! 😀

First time I see a Fluke remote display. Neat!

The two plastic "cones" in the tool box are for the original fuel filter housings - for the filters you initially purchased.

@carlthor91

6 ай бұрын

Nope. Those are for the air pre-filter dust cups, on the missing intake snorkles, that would poke up out of the engine cover. That's why he found a dead rat in the one air filter bowl. I had to service them often, back in the 70's. Those where a common air filtration system on mining equipment. Best wishes from Northern Manitoba.

@nickhorne5135

6 ай бұрын

There are similar in the original fuel filter arrangements too - trust me lol!!@@carlthor91

Please get some welding goggles...well a lens or mask for camera so we can admire the beads you are laying down while welding? Its just a bright light. THANK YOU! 💖 FROM Minnesota 🇺🇲 😊

Thank you for showing the prices of the things you buy.

KZread recommended you, now a subscriber. A lot like Diesel Creek channel from Pennsylvania!

This was another great video. As an equipment operator, I have to suggest this: If you tie a tagline onto the load you are lifting, you can control the swing or spin of the load from the cab of your tractor by pulling or loosening the tagline, which is normally just a length of nylon ski rope. That would certainly make life easier while lining things up to drop them into place or to keep them from spinning while lifting. Once again, great video!

It looks like you live north of the Arctic Circle, which is much further north than any populated areas in northern Canada. Yellowknife, in the Northwest Territories is 400 km south of the Arctic Circle and most Canadians consider that very far north. Great videos, narration and editing. I expect many of your viewers are surprised to see that your daily driver is a front-wheel drive VW van. Much less snow in the far north than people expect, and good traction when it's packed and not heavily travelled.

Very good professional 👍

5106: I don't think I have ever seen an old vice like that one. Thats pretty cool.

Awesome as usual trying to catch up with you're videos regards from Scotland ⚒️🇬🇧🏴󠁧󠁢󠁳󠁣󠁴󠁿👍👍

Very cool new toys for a good price. The workshop is well stocked too. The small wheel at the front of a trailer is a jockey wheel.

Laughed my arse off when you moved the bucket then the oil spilled on the ground. It's always funny when it's not yourself.

Great videos Invest in a vacuum oil extractor Once you use one you’ll love it Cheers from Canada

1:03:34 it's funny that you bring an air compressor out to fill up the tires... on your air compressor!

46 minutes - laughed so much my tea came down my nose. We've all been there :D

Hello from Michigan USA! I've never seen a bench vise like you have, very unique!

Install a Big Ass flood light directly mounted to above the generator either by a steel pipe or wooden pole ...if its placed outside.. so you can see what you're doing at night.

59:03 Maybe they are caps for the compressor intakes to prevent more dead mice?😂

It looks like the two items in the compressor tool box are reflectors for lights or flashlights. Old School!!!!

Connected to both air filters, above the hood, there should be a "hat" which in fact is a centrifuge to remove heavy dirt. The 2 plastic parts you found in the tool box are the funnels that seeve the heavy dirt into a cup. I guess the filters were overfilled with oil because part of it was rain water. The air filters were open to the elements. Nice video, though, nice to see your work

90-inch oled, popcorn 🍿, cold drinks 🍸 🎉, greatest video to date❤😊

It’s amazing how giving a machine a little TLC makes all the difference in the world.

Ett tips för kommande oljebyten är att skaffa sig en oljesug. Bara att suga upp genom olje stickan. Mycket smidigt! Tack för bra filmer!

@petter5721

6 ай бұрын

Får man helt rent med en sug?

@patrikfalk5684

6 ай бұрын

Beror lite på hur tråget ser ut och hur noga man är när man suger. Många tråg har en liten förhöjning vid gängan till pluggen . Så dom tömmer inte heller tråget helt. På mina två bilar blir testade jag att ta ut pluggen efter första gången jag använde den. På ena vart det samma som via pluggen och den andra lite mer. Man måste dock vara lite försiktig och känna efter botten med sugslangen. Annars är det möjligt att trycka så den viker sig och börjar gå uppåt igen men det är ganska uppenbart när man känner botten. Med detta sagt är det beroende på motorer och oljekylare alltid kvar mellen några deciliter och nån liter i systemet ändå så några extra droppar i botten gör varken till eller från. Läser man i verkstadshandböcker står det ofta oljevolym vid byte och vid fullständig demontering pga detta. Mvh Patrik

Need an oil pump and pump out thru the dip stick tube. This is what we use in the marine business to change oil. Works perfect. A pump is mounted on top of a 3gal and 5 gallon bucket! 👍👍 A long rigid pvc tube goes down the dip stick tube.

Gotta love useful toys that go broom broom and have 1 kilometre long bolts! lol

Lots of comments on the generator and the compressor so I will just say Thank You for the drone and video of the beautiful place you live in. The neighbor was jealous and stacked up equipment on your property line ! 🤣😂

It's nice to look at the work of a person who knows everything and knows how to do everything)).

at 1.10.12 it is called a jockey wheel, good video

Neat trick with the multimeter there.

YOU HAVE LOTS OF GOOD MACHINARY. AND YOU WORK WELL. MIKE FROM CANADA.

Nice video. Thanks for sharing. This is Barry, 70 yr old from Middletown, Delaware USA.

That engine gives me flashbacks and fond memories of my old Ford 2000 😄

Of course you are excited. New toys to play with!

What a find! A fraction of what it would go for around here.

You are now becoming Swedish Andrew Camarata.

i have to realise that all your hands tools arent electric. thats what a real man does.

Good content dude keep up with the good work! Greetings from Romania

@M.BJOERNSTROEM

6 ай бұрын

Thanks!

The recording/editing is KING 🫡 Bra jobbat!

That multimeter looks awesome!

I am not sure what you do for a living but it all looks like a lot of fun. You are one hard working hombre in my book, young man. I have loads of respect for your tenacity.

From Denmark: quite impressed to see a young Swede who does not use all winter to tinkle with old us cars, but makes something a lot more profitable in the time between jobs…..kudos.

If you want clean power from the generator for some sensetive computer just get a "always on" UPS. It will rectify to dc and switch it back to really clean AC. Motors, heaters etc dont really care. Some clocks use line frequency to maintain time because it is extremely stable.

Nice work👍 I have an old compressor helical screw diesil . And an old Onan generator i rebuilt also. Nyc

we have 5 rototilts of different sizes,very nice!

Excellent video. You are a very hard working intelligent young man. God bless you...

To me the air compressor looks kinda like an IngersollRand from back in the 70´s or early 80´s 😊 Extremely interesting videos you put out here Mr! I really enjoy each and every one of them....Just wish you had time to post at least 1 video a week 😂

I like the fact that you have all these different tools for each job like untightening the filter at 39:25. Probably very common in a pretty complete workshop like yours lol, but I don't know shit

This is Mark APlus on all that U do!

Sjukt roligt att se vilka smarta lösningar du har på allt! Klarlack på etiketterna samt sprayfärgen för att få fram siffrorna på det gamla filtret för att nämna några

Thank you! I'm looking forward to the next video 🥰

Looks like you got a great deal!

Dear Mr. Bjoernstroem 👍👌👏 Very well done again (video and work). Congratulations 🎉 for two great purchases. Both are nice big sturdy machines. 2) Please kindly allow me to suggest several things: The tires/rims you put on the air compressor axle are wider than the fenders/mud guards. Therefore dirt/mud/water will spray all over the device. By the way: 2) Usually compressors like this have hinged, slotted side panels. Often they will be opened up when the engine runs. 3) The most important thing: Please consider to redo the air intake openings in the hood/roof. On a machine like yours, this kind of oilbath air filters usually have pre filters (looking a bit like fat mushrooms) above the hood/roof.. The pre filters can easily be taken off. They don't let water or snow into the pot below. Your solution can/will create problems because the air filters suck warm/hot air from the engine and dirty air into the engine/compressor compartment. As always: Thanks a lot for making teaching explaining recording editing uploading and sharing. Best regards, luck and health in particular.

@martinromerocintron6294

6 ай бұрын

Hi I am from The USA love what you did and it look good also good Buy BUT I Agree with @Chr.U.Cas2216‧ the air intake have to be put back to factory with the Correct air filter set up or you will have trouble with it also I think the Hole you have in the center is for inspection of the battery this can be cover with a round cover with a bottom holding bar that you can tie from the top be sure is water seal you can maybe also set up compressor to use regular garage air hose in the time you use a regulator it will be good if you get another tire damage or you on the field and need to do some regular mechanic work with air tools

I've just found your channel and have to say that I love your videos. Mechanic stuff, beautiful scenery, great commentary and informative, and of course the length. I'm all in for the longer videos. Thank you for your work!

Awesome content. Air compressor and generator what could be better.

As always, great video and perfect length!

Not sure if anyone suggested this, but just drill a large hole in your oil drain plug and tap it with whatever size fittings you have, then you can still put your valve on. May still have some residual oil in the pan, but you're going to have that anyways.

Always a good day when you post a video. Love watching you work through different projects. Nice job!

Hope that Volvo is serving you well, its a Swedish beast anyway!

You are getting things done, while the world watches new telly

Its important to use safety clips or wire to secure your hose connections. This keeps them from coming apart while in use. The tiny hole on the Chicago style couplers is where the clips or wire go.

@MakerMadness

6 ай бұрын

I believe they are called “Whip-Checks” in English. I was thinking the same thing. During the well drilling video he let those Chicago fitting/hose fly about which gave me actual anxiety

@K20XRL

6 ай бұрын

Yeah I used to always use whip checks at work on our compressors feeding air to our drilling rigs, definitely don’t want to be bitch slapped by a wild air line 😂 we have always called those air fittings crows feet didn’t know they where called Chicago style fittings

Knipex for the win!! Very nice!!

You are the Swedish Andrew Camarata. It's nice to watch you. Greetings from Poland

My grandfather from Sweden used a folding measure like that in the 1950s.

I’ll be just up the road from you in Feb, visiting Kilpisjarvi, only 275km north of you. 😂

I Love your videos. I check every day to see if you made a new one. Keep up the great work. I see a lot of people compare you to Andrew Camarata in NY. You are both the best.

This guy is the Swedish more civilized version of AC 😂

WOW Both Nice Machines and as Normal you have made them Great Machines Great Vlog Loved it thanks

Nice video! And No Guts No Glory concerning the pump/governor mishp.

Thank for video greetings from Slovakia. 😉😉😉😉

Love watching your videos. With the easy explanations, without rattling on like some KZreadrs do. Keep up the good work. Blessings from Aus.

You are very clean, Amazing!

I'm glad to see things that happen to me, also happen to other mechanics.