Bosch Self-Leveling Cross-Line Laser Level GLL 30
Тәжірибелік нұсқаулар және стиль
This video is about the Bosch Self-Leveling Cross-Line Laser Level GLL 30. To see a little higher end multifunction laser level - • Kaiweets KT360A Laser ... . This video includes basic operating instructions of the Bosch Self-Leveling Cross-Line Laser Level GLL 30 as well as some dos and don'ts. The video also includes some handy tips when using the Bosch Self-Leveling Cross-Line Laser Level GLL 30.
Bosch Self-Leveling Cross-Line Laser Level GLL 30 amzn.to/33zRj6X
#FieldGuidetoDIY
FieldGuidetoDIY.com
/ fieldguidetodiy
Пікірлер: 50
I have one and have used it in a few applications, tile being one of them. I find it really useful in flooring. Once you dry fit and figure out what corner your starting in the laser is handy for a straight & level start line.
@FieldGuidetoDIY
3 жыл бұрын
GREAT idea. Thanks so much for sharing!
Thank you for making this video! Definitely helped me out!
@FieldGuidetoDIY
Жыл бұрын
You are so very welcome. I’m so glad it helped. Please let me know if you have any other questions.
Thanks. Just bought one. Nice tips
@FieldGuidetoDIY
4 ай бұрын
Nice!
@Brazill253
4 ай бұрын
@@FieldGuidetoDIY I have no idea what these whinging Muppets are talking about in some of these comments...a lot of user error going on it seems! Great device
Thank you sir
@FieldGuidetoDIY
Жыл бұрын
You are quite welcome!
Muchas gracias amigo !!$
@FieldGuidetoDIY
Жыл бұрын
De nada.
What projects do you think this laser level would be best for? Wallpapering? Tiling? Paneling an accent wall? What are your thoughts?
@yongyea4147
Жыл бұрын
Wallpaper should be illegal.
@Brazill253
4 ай бұрын
@@yongyea4147Correct
Nice video, mate! I have this laser level and i'm looking for a hard case for it, such as ones made by Pelican or Plano... any ideas?
@FieldGuidetoDIY
Жыл бұрын
I’m so cheap i would be tempted to buy some foam rubber and one of the hard plastic ammo boxes they sell at Harbor Freight. That would protect it for a fraction of the cost of a Pelican.
Thank you for the review. 😊
@FieldGuidetoDIY
8 ай бұрын
Absolutely. I’m so glad it helped.
Self levels? Only it’s perfectly level itself. It can’t attach to the ladder rungs like some reviewers demonstrate. We must have a bad ladder. We can’t get a horizontal line up above where the laser level is sitting. Well what good is that? Someone please explain how do a get a horizontal line about a foot down from the ceiling?
@FieldGuidetoDIY
Жыл бұрын
Great question, Wendy. Let me think on that. If anybody else has any suggestions, chime in.
@yongyea4147
Жыл бұрын
@@FieldGuidetoDIY put the tripod on a table. I don't know why people can't grasp this concept. I stack boxes. Wood. Whatever you get it higher.
@yongyea4147
Жыл бұрын
This Lazer is amazing and I use it as a professional high-end remodeler. Almost every day. There is nothing is wrong with it. Stack thing up and then set your tripod on that or just the Lazer on top of little things for baseboard height (low heights)
@yongyea4147
Жыл бұрын
@@FieldGuidetoDIY i think you need to show people how to use it with a tripod and keep it level. Using the bracket it comes with showing the step of actually leveling the Lazer first. Show how to do this high and low.
Is it magnetic? Can i attach it to metal?
@FieldGuidetoDIY
2 жыл бұрын
Anderson, it is NOT magnetic as other self-leveling laser levels are. You can use the included mount or put it on a tripod. Thanks so much for watching. Please let me know if you have other questions or any suggestions.
The problem with this laser, it can not tilt. you always have to bring it to the same height as the horizontal line.
@FieldGuidetoDIY
8 ай бұрын
Very true. So if you want to cast a line to do a chevron pattern for example, this one would not work.
@lalievigi7596
8 ай бұрын
Which laser can tilt ?
@Align700nitro
8 ай бұрын
@@lalievigi7596 The GCL-2 with lock mode let you position it anyway you want. however, the idiots design the thing makes the laser blink in lock mode which annoy the heck out of me. Pretty much all the laser I could find in store bosch, dewalt you name it blinks in lock mode, probably shares the same shit logic board the idiot designed.
Mine just blinks acywr 5 seconds.
Is the Lazer supposed to flash?
@FieldGuidetoDIY
Жыл бұрын
The laser flashes while it calibrates. Once it is steady, it should stop flashing. Let me know if that helps.
@TheHugsvilleHorror
Жыл бұрын
@@FieldGuidetoDIY works like a charm. Have a sub you glorious bastard.
I must be doing something wrong because I find this leveler does not work above the height of the tripod. So it has been pointless to me, it won't even get high enough for hanging a picture.
@DZ-fx1vv
Жыл бұрын
Same, I can’t tilt it up or else it keeps blinking and won’t level
@littlebopeep3377
Жыл бұрын
This laser level is garbage. Going to return.
@yongyea4147
Жыл бұрын
@@DZ-fx1vv you have to have it level. You can't angle it up. Set your tripod on top of a table or a box to get it up higher.
@dw.imaging
Жыл бұрын
I bought it this week and immediately returning it for the same working height reason. I don’t have the time to rig up something higher than my tripod. I can use a measuring tape and a level at a fraction of the time to deal with this thing.
@dogmo3796
10 ай бұрын
It's junk
Does it put a line in the ground too?
@FieldGuidetoDIY
Ай бұрын
Negative. This model only does the wall.
Wjy does mine just keep blinking? The line never stays solid
@FieldGuidetoDIY
6 ай бұрын
It is not calibrated. Turn it on and set it on a table to see if it will ever calibrate.
Why does my level indicate angles that are level after 4 seconds? Nothing is straight, only me.
@FieldGuidetoDIY
9 ай бұрын
I don’t know. I have not experienced that. I know it needs to sit perfectly still to calibrate.
A joke, I’m bringing mine back if a new battery doesn’t keep it from flashing
I’m here because I hate reading directions lol…. Just show me what to do
@FieldGuidetoDIY
6 күн бұрын
I am totally the same way!