✨ Bosch Dishwasher Doesn’t Dry Dishes - (FIXED) ✨
✨ Bosch Dishwasher Doesn’t Dry Dishes - (FIXED) ✨
Bosch Dishwasher doesn’t dry dishes due to a faulty solder joint on the heater relay.
CLICK HERE TO ORDER A NEW CONTROLLER: amzn.to/3p2G680
This video shows how to re-solder the heater relay and you get the dishwasher heating up again.
✨ If the video was helpful, remember to give it a Thumbs Up 👍 and consider Subscribing. New videos every Saturday ✨
▶️-Subscribe Here: / @quickandeasy5minuteap...
🛠-Do You Need Any Additional Help? Become A Member of Our Channel Today and Get LIVE HELP from Scott With Your Appliance Repair. Pick #1 FIX-IT FAN for Just $4.99 and get Text, Zoom, Email or FaceTime Live Help. Non-Members pay $45.00 for Live Help. Just $4.99 for Channel Members. Click Here to Join Today: / @quickandeasy5minuteap...
💻-Website: www.ScottTheFi...
📖-Like us on Facebook: / scottthefixitguy
🐥 -Follow us on Twitter: / scottthefixitgy
🌎-Instagram: / scottthefixitguy
-👀See our KZread Channel: / quickandeasy5minuteapp...
🙏-If My Advice Has Helped You…
Please Click Here To Donate: www.paypal.com...
Donate with Venmo - Click Here:venmo/u/Scott-Flint-1
🔌-GREAT PLACE TO ORDER O.E.M. Genuine Parts for Your Appliance - Click Here: fix.pxf.io/MmrxYY"
Need Extra Help with Your Appliance Today - Click Here:asqme.com/@sco...
⚙️-Good Place to Buy Parts: bit.ly/3wD4L5W
🧰-List of Tools used by Scottthefixitguy: • ✨ Scott The Fix-It Guy...
- You Can Fix Your Appliance Yourself and Save $$
Disclaimer:
Because factors beyond the control of Scottthefixitguy, I cannot guarantee against improper use or unauthorized modifications of this information. Scottthefixitguy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Scottthefixitguy recommends safe practices when working on appliances and vehicles and or with tools seen or implied in this video. Due to factors beyond the control of Scottthefixitguy, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Scottthefixitguy.
Thank you 😊 I’d Like To Thank All The Awesome Viewers That Have Supported This Channel By Subscribing or Joining as a Channel Member.
Thank You for Your Very Meaningful Support😊🙏 🐔 Check Out Our New Channel Dedicated To Showing How To Raise Your Own Backyard Chickens: / @raisingbackyardchickens ***
***
Quick and Easy - 5 Minute Appliance Fixes Do you need More Appliance Repair Direct Help from Me? Visit me at: AsqMe.com@ScottTheFixItGu
Пікірлер: 77
5:14 if your son grows up having seen you take apart a dish washer and replace a circuit board in it he is going to think you are super man.
@QuickAndEasy5MinuteAppliance
4 ай бұрын
So true😂👍
I've been an appliance repair tech for 10 or 12 years don't even know anymore and I thought I was the only one who repairs PCBs. It is nice to see someone actually repair a PCB and give all the right information despite the fact that most people (even techs) will just replace.
@QuickAndEasy5MinuteAppliance
2 жыл бұрын
Thanks so much Ian. We’re doing it “old school”. The right way😊👍
Wow man you saved me the cost of a new dishwasher You’re exact steps fixed my dishwasher. Can’t say thanks enough!
@QuickAndEasy5MinuteAppliance
3 жыл бұрын
Awesome, Thanks so much Brian👍
Great video, I was prepared to order a new heating element or just replace the dishwasher. This video helped me troubleshoot and repair the problem. 20 minutes work and it’s as good as new.
@QuickAndEasy5MinuteAppliance
4 жыл бұрын
Thanks Mick😊
Thanks, your video was really helpful in showing how it all came apart without breaking the delicate plastic parts. This was the problem on my Bosch model shx43m05uc/50. I got it fixed in about 30 minutes, plus cleaned up the buttons while I had it apart.
@QuickAndEasy5MinuteAppliance
3 жыл бұрын
Awesome Luke, thank you
Thank you my friend. I started with the service manual. I got the machine out of the cabinet, the door off and was ready to remove the sides per the manual's instructions to access and test the heater itself. Then i decided to do an internet search....just to see. Turns out the Bosch service manual is severely lacking when it comes to verifying the root cause. Hey Bosch..KISS.
@QuickAndEasy5MinuteAppliance
4 жыл бұрын
Nice job😊
Worked perfect just as you showed on the video!!! Had a burn mark on the plastic cover. First cycle was one hour and it was very hot like before. The clean and sanitized were lit!!! Big Thank You!!!!
This worked exactly as described on my eleven year old Bosch SHV45M dishwasher. Thank you.
@QuickAndEasy5MinuteAppliance
4 жыл бұрын
You’re very welcome😊
You have just saved me a small fortune, great vid and easy fix. THANK YOU SO MUCH! The wife is very happy :)
@QuickAndEasy5MinuteAppliance
6 жыл бұрын
Excellent , Thank you😊
I have a Bosch SHP65T55UC. All the controls are on top of the door. Is the fix on the board the same with this unit? I couldn't see your soldering because the camera was aimed too high. Thank you.
Great video. Thanks. Only one request. Could you revideo the soldering section and zoom in on before and after? Right now it's hidden or too far away to see detail. Really great, please keep it up!
@dwgorgeous
6 жыл бұрын
I agree! The camera was aimed too high to see the most important part!
You are the man!! Going to go try this repair on my Bosch tommorow
Our SHE3ARF2UC/21 had the same kind of problem, almost. It was throwing an E:02 error which is a heater problem towards the end of the cycle and it wasn't heating the water so it wasn't drying well. It was NOT the overheated solder connection which is caused by the relay contact developing a high resistance connection due to pitting from arcing, so better to actually change the relay after you have verified the problem by resoldering the pin. But back to the other failure case. On our controller there was no issue with the solder connections on the relay, but the relay coil was open so the relay will not engage. For the 12V relay that our controller board uses the coil resistance should be about 400 ohms or so. And the heater relay was open (infinity). Replacing the relay got the DW working like new again. So keep in mind if you don't have the overheated solder connection problem then you should check the relay coil resistance to make sure that the coil is not open.
@QuickAndEasy5MinuteAppliance
3 жыл бұрын
Thanks so much for the fix detail😊
Amazing, this worked like a charm on my Bosch. Everything was exactly as shown in the video. Thank you!
@QuickAndEasy5MinuteAppliance
5 жыл бұрын
Thank you 😊
My dishwasher filled fine, but the sanitize light would not come on indicating that it did not reach 150° and the dishes would not fully dry. When I first looked at the board, I didn't notice breaks in the solder that were only an extremely faint ring around two posts with no corresponding burn marks or other signs of heat. Therefore, I bought a replacement Bosch heating element. So to save yourself the expense and effort of a much more involved (and fruitless) repair, be meticulous in your examination of your board. And I wish you good luck in all your repairs!
@QuickAndEasy5MinuteAppliance
3 жыл бұрын
Nice job John😊😊😊
Great video! Thank you for making it. I have a Bosch SHU43C0x/22 showing the exact same problem. Just two quick question: 1) when the fix is done, is there a quick way to verify the fix rather than running through the 35-minute quick wash program? 2) If the heater relay itself is broken, do you know where I can buy one to replace it? Thank you again.
@QuickAndEasy5MinuteAppliance
2 ай бұрын
Hi Brad, The relay on that model is built into the controller.
@bradchen4369
2 ай бұрын
@@QuickAndEasy5MinuteAppliance Thank you!
@bradchen4369
2 ай бұрын
@@QuickAndEasy5MinuteAppliance I fixed my dishwasher today. It was exactly the same problem as shown in this video. I can't express how happy I was when I opened the control board and saw that meltdown spot. Thank you for saving me a fortune and for the happiness this fix brought me.
I miss my old school dishwasher amongst many other old school appliances.
@QuickAndEasy5MinuteAppliance
2 жыл бұрын
You speak the truth👍😊
It certainly does NOT Dry Dishes and the smaller one doesn’t have the simple cycle Rinse then hold So you rinse dishes so they clean easily later when you can fill it full and run it then. Even the Hotpoint Dishwasher has rinse and hold. And Dries the dishes
@QuickAndEasy5MinuteAppliance
Ай бұрын
Hi Kathy, Does the water get as high as the top of the round plastic filter handle?
Hello. If you're not getting enough water what should you be looking for to get the water level up higher?
@QuickAndEasy5MinuteAppliance
3 жыл бұрын
Great question, You just need to replace the fill valve. It’s actually pretty easy to do.
Will this work on model SHXM78W55N/10
@QuickAndEasy5MinuteAppliance
5 ай бұрын
It should work👍
Unfortunately, I saw your video after a 1st repairman charged me $50 and said he couldn’t fix it. A 2nd repairman said the board was bad and ordered a new one. He charged me $235 for the new board and after labor and taxes my bill was $397.00! Total paid out $447.00!! He left the old board. After watching your video, I opened the case from the old board and identified the same issue when opening the board case. Even being technologically-challenged I believe I could have repaired the problem and saved just under a half a grand.
@QuickAndEasy5MinuteAppliance
5 жыл бұрын
Gotcha, Next time you’ll be ready👍
Our dishwasher seems to wash fine and the dishes are clean after running it, but this morning, the dishes weren't warm/hot like they usually are when we open the door. There's no error code, but it says "Add Rinse-Aid Call for Service" in the Cycle Status display window. Also, we always use the "Sanitize" setting. Any ideas? Thanks!
@QuickAndEasy5MinuteAppliance
2 жыл бұрын
Hi Paige, Can you send me the model number?
Good video but the camera angles and all the movement next time maybe use a tri pod. I couldn’t see much of what you were doing. But thank you for the video you explained it well enough to where I feel confident enough to try the fix. So just add more solder and that’s it ? Does it connect to anything
It's VERY simple. If it doesn't have a heat element, it won't dry the dishes. We made the expensive mistake of buying one of these junk dishwashers. Now I have one that actually DRIES the dishes. Problem solved. Bosch is cheaply made crap.
@QuickAndEasy5MinuteAppliance
Жыл бұрын
Yeh, The new design of heating element built into the circulation pump is not good😬
Mine is brand-new. It just doesn't dry. I have a colleague who had the same experience. There do not seem to be any non-invasive diagnostics.
@QuickAndEasy5MinuteAppliance
2 жыл бұрын
It should dry the porcelain and metal really well but they will not be able to dry things made of plastic.
Thank you for the video. I have a thermador dishwasher and the water is not getting hot and getting an error 09. I took it apart thinking that its the Heat Pump. This was before I saw your video. Before I take apart the control panel I want to check if the heat pump is working. I'm getting no resistance Ohm reading between the two red terminals on the heat pump. I should be getting 15-30 ohms. Since I'm getting no resistance at all does that mean the heating pump is bad? If so can that be fixed or do I just replace the whole pump? thanks
@QuickAndEasy5MinuteAppliance
5 жыл бұрын
Hi Paul, I would also check the water level when it fills. It should almost reach the top of the round plastic filter handle. If it doesn’t fill with enough water the heater won’t activate.
What kind of flashlight is that? Seems to be super useful
Great video! You said it does this within the 8-10 year mark but we just bought ours new and it’s doing that. Dishes don’t dry. Less than 4 months of use. What’s your suggestion. The same?
@freeon240
5 жыл бұрын
New ones need drying agents. They dont use typical heating on new modles thanks to codes. Try jet dry of that doesnt help. Then you may have a venting issue or control board issue
Our Bosch dishwasher gets the water warm, but everything stays wet inside upon completion and there seems to be a large amount of water left in the bottom... would this fix be useful for these symptoms?
@QuickAndEasy5MinuteAppliance
3 жыл бұрын
Hi Mattison, Can you send me a picture of how much water is left at the end of the cycle to my email at Scottthefixitguy@yahoo.com
@mattson
3 жыл бұрын
@@QuickAndEasy5MinuteAppliance ok - will do, after I run it tonight, thanks for the reply!
Geez. Changed out the controller, which was straight forward. No improvement in the quality of the drying. Changed out the other controller located under the dishwasher. Still no improvement in the temperature of the drying cycle. Next step would be....? (I know...second to last step is call a repair person; last step is to replace the dishwasher)
@QuickAndEasy5MinuteAppliance
Жыл бұрын
Thanks Rick. Can you send me your model number?
@rickboswell9648
Жыл бұрын
@@QuickAndEasy5MinuteAppliance sure can! Bosch SHX3AR75UC/22
If the dishwasher is just luke warm, then I'm guessing it points to a different problem?
@QuickAndEasy5MinuteAppliance
3 жыл бұрын
Luke warm means that the dishwasher heater never kicked in. How high does the water get after 10 minutes into the cycle?
@Flashbax
3 жыл бұрын
@@QuickAndEasy5MinuteAppliance it gets quite warm throughout the cycle but I have to put it to hottest setting. Usually it would be piping on that setting
@QuickAndEasy5MinuteAppliance
3 жыл бұрын
Might be the heater relay soldering joint is loose and just needs to be resoldered to sent power to the heater.
You do a good job describing what you're doing, but half the time, the camera is not pointed at the part you are talking about.
Would this work about the same for a kitchenaid?
@QuickAndEasy5MinuteAppliance
6 жыл бұрын
I don’t think so.
My dishwashers upper tray is stuck
@QuickAndEasy5MinuteAppliance
2 жыл бұрын
Can you send me a video of what’s happening with your upper tray to Scottthefixitguy@yahoo.com
Great video , but I have a question , did the washer has a error code ?
@QuickAndEasy5MinuteAppliance
6 жыл бұрын
This one didn’t show a code, just not drying dishes.
@dr_920
5 жыл бұрын
Mine doesn't show the error code, but when it is in the programming mode, it shows E1, related to the heating issue. Extreme longer cycle time and not drying in the end.
Just got a brand new Bosch dishwasher not drying properly. Guess the extra money is not worth it. They are all made in Chinese factories with same parts . I thought it was made in Germany guess I was wrong
@QuickAndEasy5MinuteAppliance
3 жыл бұрын
Is it just the plastic items that aren’t drying well?
@thousandnations1soul450
3 жыл бұрын
@@QuickAndEasy5MinuteAppliance no everything
@QuickAndEasy5MinuteAppliance
3 жыл бұрын
Is there lots of water left at the end of the cycle?
Don't buy a Bosch...if you want dry clean dishes.