Great video. As a sheet metal mech, I can really appreciate this. Excellent work. Thanks
@tondegens24219 күн бұрын
Een aantal keren erbij geweest voor assistentie. Het is inderdaad een hele mooie job. Geweldig om die jongens weer te zien op deze opnamen nu ik zelf met pensioen bent.
@hensonchan61792 жыл бұрын
Thanks for the video we will going to do this kind of modification in a few days
@GE-gg5vs Жыл бұрын
I am amazed at the high level of skill of KLM mechanics.
@douglasames6495
Жыл бұрын
I work for American as an AMT/Inspector. We're just as good.. 😉
@muqtadaelriza
7 ай бұрын
@@douglasames6495 I work at building the airplanes at Boeing, specifically on the 777 line. We are just as good 😉
@ronaldr.89112 жыл бұрын
Mooi staaltje vakmanschap waar we trots op mogen zijn. Prachtig gefilmd Henk!
@germenmolenaar372 жыл бұрын
Leuk en interessant om te zien , wederom weer prachtig gefilmd 😉
@nubery1002 жыл бұрын
very seasoned professionals here,i can tell .gj, nice sheetmetal work
@balderwijnands88972 жыл бұрын
Leuk, mooi om te zien!!
@pixelgunboy7244 Жыл бұрын
Great Video, Massive Effort, top job by KLM Engrg!
@knotessential Жыл бұрын
Beautiful work. Thanks for sharing!
@kashifanjum50152 жыл бұрын
Huge Job, explained well Good job guys
@AlexKoltsov Жыл бұрын
We did a similar task - replacing the mounting bolts of the consoles to the center section.
@jurrien752 жыл бұрын
Bekende gezichten en een mooie klus!
@undresss_b Жыл бұрын
Beautiful work
@sandalvinokurov124 Жыл бұрын
Very clean aircraft)
@metalmonster34 Жыл бұрын
Awesome job
@michelhoutop92802 жыл бұрын
Mug weer een toppertje 👊🏻
@juwelmirza15952 жыл бұрын
Excellent
@friedchicken19 ай бұрын
I work on smaller aircraft and this is amazing
@ricarenado Жыл бұрын
Amazing!
@praharsh638 Жыл бұрын
Phenomenal job done
@cristianocristofolini79632 ай бұрын
Fantastic!
@grupsio2 жыл бұрын
Mooi gemaakt henk!!
@iljakiel12112 жыл бұрын
Complimenten Henk 👌👌👌
@milesbrown8016 Жыл бұрын
Awesome 😎
@khalledabuomar5930 Жыл бұрын
How long did this work take? And how many people worked with it
@ibnhakchannel7096Ай бұрын
At what flight hour this longeron requires replacement?
@Triple259772 Жыл бұрын
What nightmares having to remove all that seal. Didn’t know you could cut out pieces of the plane like that though.
@Failure_Is_An_Option
3 күн бұрын
Seal? Steal? Clown...
@singleproppilot Жыл бұрын
That’s a huge job. I wonder what was wrong with the old longeron they removed.
@TheGreenharm
Жыл бұрын
At 1:50 you can see that there are cracks in the longeron holes.
@MiturBinEsderty11 ай бұрын
Why didn’t they just replace the liongeron? I understand the is an AD about them cracking . Why the need for a doubler.
@MeMo344792 жыл бұрын
How long does it take to replace the longeron ? The entire process?
@TheGreenharm
2 жыл бұрын
It takes about 3 weeks for both sides. Not working in night shifts and also not in weekends.
@thefungusshow2535
Жыл бұрын
@@TheGreenharm What is the reason for replacement?
@TheGreenharm
Жыл бұрын
@@thefungusshow2535 See the crack inspection around the holes at 1:50...
@SaidAlkailani10 ай бұрын
We did 7 A/cs in our facility
@prithvinayak84436 ай бұрын
What are the probes that are sticking out at 1:58 & 4:05 ?
@Failure_Is_An_Option
3 күн бұрын
Not probes. Cleco fasteners.
@prithvinayak8443
3 күн бұрын
@@Failure_Is_An_Option Thank you very much!
@kojokwame5201 Жыл бұрын
What Kind of CAD applications are are normally used for such designs. I want to specialize in CAD/CAM
@leewilliam34179 ай бұрын
Mmmm😊
@DaniloVillaruben-kl8mx Жыл бұрын
Good day sir! Im very interested to apply. But how?
@TheGreenharm
Жыл бұрын
Where do you live? Because this work is done at KLM E&M at Amsterdam SPL
@MeaHeaR7 ай бұрын
HidéDraawŁicķs
@Mike444602 жыл бұрын
You guys over there ever hear of fall protection and confined space. Yikes.
@FirstLast-ve6jg2 жыл бұрын
KLM stuck with Boeing and paid the price
@tomatosoupwoo
Жыл бұрын
Really sad to hear, but Boeing maintenance is almost always cheaper than airbus..
@MeaHeaR7 ай бұрын
Eié Dothé wondéf if this is samé mans thatt bé fixéd JÁŁ 123 747 ¿¿¿¿
Пікірлер: 51
Great video. As a sheet metal mech, I can really appreciate this. Excellent work. Thanks
Een aantal keren erbij geweest voor assistentie. Het is inderdaad een hele mooie job. Geweldig om die jongens weer te zien op deze opnamen nu ik zelf met pensioen bent.
Thanks for the video we will going to do this kind of modification in a few days
I am amazed at the high level of skill of KLM mechanics.
@douglasames6495
Жыл бұрын
I work for American as an AMT/Inspector. We're just as good.. 😉
@muqtadaelriza
7 ай бұрын
@@douglasames6495 I work at building the airplanes at Boeing, specifically on the 777 line. We are just as good 😉
Mooi staaltje vakmanschap waar we trots op mogen zijn. Prachtig gefilmd Henk!
Leuk en interessant om te zien , wederom weer prachtig gefilmd 😉
very seasoned professionals here,i can tell .gj, nice sheetmetal work
Leuk, mooi om te zien!!
Great Video, Massive Effort, top job by KLM Engrg!
Beautiful work. Thanks for sharing!
Huge Job, explained well Good job guys
We did a similar task - replacing the mounting bolts of the consoles to the center section.
Bekende gezichten en een mooie klus!
Beautiful work
Very clean aircraft)
Awesome job
Mug weer een toppertje 👊🏻
Excellent
I work on smaller aircraft and this is amazing
Amazing!
Phenomenal job done
Fantastic!
Mooi gemaakt henk!!
Complimenten Henk 👌👌👌
Awesome 😎
How long did this work take? And how many people worked with it
At what flight hour this longeron requires replacement?
What nightmares having to remove all that seal. Didn’t know you could cut out pieces of the plane like that though.
@Failure_Is_An_Option
3 күн бұрын
Seal? Steal? Clown...
That’s a huge job. I wonder what was wrong with the old longeron they removed.
@TheGreenharm
Жыл бұрын
At 1:50 you can see that there are cracks in the longeron holes.
Why didn’t they just replace the liongeron? I understand the is an AD about them cracking . Why the need for a doubler.
How long does it take to replace the longeron ? The entire process?
@TheGreenharm
2 жыл бұрын
It takes about 3 weeks for both sides. Not working in night shifts and also not in weekends.
@thefungusshow2535
Жыл бұрын
@@TheGreenharm What is the reason for replacement?
@TheGreenharm
Жыл бұрын
@@thefungusshow2535 See the crack inspection around the holes at 1:50...
We did 7 A/cs in our facility
What are the probes that are sticking out at 1:58 & 4:05 ?
@Failure_Is_An_Option
3 күн бұрын
Not probes. Cleco fasteners.
@prithvinayak8443
3 күн бұрын
@@Failure_Is_An_Option Thank you very much!
What Kind of CAD applications are are normally used for such designs. I want to specialize in CAD/CAM
Mmmm😊
Good day sir! Im very interested to apply. But how?
@TheGreenharm
Жыл бұрын
Where do you live? Because this work is done at KLM E&M at Amsterdam SPL
HidéDraawŁicķs
You guys over there ever hear of fall protection and confined space. Yikes.
KLM stuck with Boeing and paid the price
@tomatosoupwoo
Жыл бұрын
Really sad to hear, but Boeing maintenance is almost always cheaper than airbus..
Eié Dothé wondéf if this is samé mans thatt bé fixéd JÁŁ 123 747 ¿¿¿¿