Get some actual operators to test them lmao

Where did they find these operators

@Tay710

4 жыл бұрын

that what i was thinking lol

@jorgedelossantos9651

4 жыл бұрын

Jajajaja give them a break . They are learning lol

@elviejon84ful

4 жыл бұрын

🤣🤣🤣 drunk drivers

@michaelmactavish1728

4 жыл бұрын

@@elviejon84ful bob cat pretty well copying off kubota skisteers

@shanksta81

4 жыл бұрын

John Galt That’s exactly what I was going to say! Worst operators ever.

About time they were redesigned!

They need to have more skill people testing this machines.

As their 'operator' dumps dirt back on himself haha...

@wesleylanier02

4 жыл бұрын

Yeah im just going on a long shot here but i think the "operator" doesn't know what curling the bucket is 😂

@Fiberglasser03

4 жыл бұрын

Actually that's a woman.....should explain it.

@Nothingtoya

4 жыл бұрын

Give them an open cab, if they're smart, that'll only happen once

I always drive with the bucket blocking my view lolol

I think the new design looks cool

We bought a brand new s770 in Sept of 2017 and it has never gone more than 6 weeks at a time without it going back to the dealer or the dealer coming up to work on it. We use it primarily to load and unload hay so it is never worked very hard. The machine itself is really nice in terms of responsive handling, good cab visibility, etc but we will never buy 1 again due to its extremely poor reliability. Several other farmers around me were considering buying bobcat but have changed their minds after seeing all the issues we have had with ours. Some issues we had for those interested are: multiple sensors going bad with the DEF/ emissions system causing the machine to only idle, ac malfunctioning (went to the dealer to be fixed 3 times and each time would only work for about a week afterwards) , hydraulic pump literally falling apart 3 times at around 500 hrs, and now at 1600 hours the lift and bucket cylinder seals are worn out. The boom will sink all the way to the ground in less than 10 min with a 1400lb bale. These are some of the issues we have had with our Bobcat s770 and have caused us to decide never to buy a Bobcat branded machine again.

@Nothingtoya

4 жыл бұрын

I have a Kubota SVL75-2, it just rolled over 2000 hours. The only problem its had is a hydraulic fitting broke because of my guys not cleaning out the belly pan. I've been absolutely amazed by this machine.

@bobcatron609

4 жыл бұрын

Problems with all def systems, should of bought s 740 no emissions. Less hp than 770 but nearly same torque, kubota is having problems with def systems also

@adambindar3048

4 жыл бұрын

@@bobcatron609 , yeah seems bobcat is having more trouble than some other brands though. Plus, half of the problems this s770 has had , has nothing to do with emissions. Just seems to be an all around lemon:(

@adambindar3048

4 жыл бұрын

I like the bobcat the best as far as comfort, visibility, cab, etc, but primarily need something that's not always breaking down. Being in the shop every 6 weeks gets old☹

@bobcatron609

4 жыл бұрын

@@adambindar3048 I hope you have better luck with another brand. Thanks for feedback. Happy new year

Hi guys. I am from Russia. I also love metalworking. I design and build skid steer loaders! I like America!

@jessep7943

4 жыл бұрын

Дмитрий Тростин good for you pal

Salesmen trying to run a skid steer....

Bobcat is the presidents choice of skid steers

Why not hire a good operator wen showing a new tractor ? 😀

@jennydeal812

3 жыл бұрын

ya

Wooow its really amazing .. they changed the design of well known Bobcat to something more futuristic

@tixqixd1318

4 жыл бұрын

Arabian Cars this is Trash what they have done i think

Keyless start sold me right there

@zb6618

4 жыл бұрын

Andrew Gaulton cat has keyless start too

@golfy808

4 жыл бұрын

@@zb6618 cool.. Was being sarcastic

@zb6618

4 жыл бұрын

Andrew Gaulton oh nice 😂

@nukinfuts6580

4 жыл бұрын

My New Holland is Keyless

the beast

Would love a response from someone that could help I’ve got the T66 R-series track machine with hand and foot controls (not pilot).. I’ve very upset with the way the food controls handle this year, when they were manual it was so much easier to control.. my main issue is the FLOAT control engages all the time and if I could just turn it off completely I’d be a lot happier and people would be a lot safer, it’s impossible to make nice movements (going down) with out the [float] just coming on at random. Can I turn [float] off completely?

does bobcat intend to come out with larger model loaders in the r series?? To match the t770 and t870?

Did they change the window design.? If the a/c goes out those things are a hotbox.

Still no protection on the front bucket cylinders either.

@dillongrimm8560

4 жыл бұрын

yes there is. The fittings are now on the back side of the tilt cylinders

@zb6618

4 жыл бұрын

Dillon Grimm what about the rams?

@nickestes1839

4 жыл бұрын

In demolition, I have never had any issues hitting the tilt cylinders. I just hope there is better protection for the quick couplers.

@michaelmactavish1728

4 жыл бұрын

kubota svls and ssv's has cylinder protecton on all theres

This is an exactly what it would look like if I let my wife run the skid loader.

Hmmm...one piece cab like a Cat SSL, air flow strategy through the engine compartment like a Cat, rear loader linkage very similar to a Cat...very interesting.

@animenut69

4 жыл бұрын

Looks like they went out and bought some cats then painted them white / slapped some decals on and called it done lol

@joenobody2580

4 жыл бұрын

@@animenut69 and lowered them to hang up in mud and everything else. They missed the entire concept of using torsion bars for more ground clearance.

And they ruined their brand. Fire the idiot that decided it was best to draw clean air from behind you as you create dust.

@IndependenceIron

4 жыл бұрын

Agree not the best idea. Not only dust but also collects a lot of debris when in wooded areas. Great way to cause a fire.

@nickestes1839

4 жыл бұрын

My concern is in demolition, you can now have debris enter through the rear door and damage internal components.

@tixqixd1318

4 жыл бұрын

They Build Over one Million loaders with this Design or whatever and than After this Long Time they create an trashcat no bobcat

@mr5039

4 жыл бұрын

Are they AWD?

Did Bobcat buy out AVANT?

What's the reason why the buckets are shaped like that as opposed to a bucket on a normal sized loader? Just curious.

@zb6618

4 жыл бұрын

cnote4461 which way are you taking about? Because they are longer so that you can see the front of them to so your grade, and they are at a corner on the back so that you can use the back of the bucket to grade if you have teeth on the front, it’s pretty standard for all skid loaders

@cnote4461

4 жыл бұрын

@@zb6618 yes... Thats what I've always wondered. My son once asked me why their shaped like a wedge instead of like a bucket on a full sized loader, and I couldn't answer his question - but wondered that myself.

@tinknal6449

3 жыл бұрын

Ignore the buckets. They ARE interchangeable....

The operators are an embarrassment to Bobcat

This just shows that Caterpillar is the leader in innovation. The new bobcat skid steer(2019) arm linkage, engine intake placement, and exhaust placement is copied from the Caterpillar D2 series(2013).

Bobcat looks better than my New Holland. Some say they are better yada yada. I buy for the local service. To me that has a lot to do with the machines I add to my fleet. Sweet look though.

Muy buena maquina bobcat yo soy operador y los bobcat son lo mejor saludos desde colombia my name is edwin

@reikonr7173

4 жыл бұрын

Que modelo usas?

Lolololol. My Hydra-Mac 20C Will still out Run & Live these machines! #HydraMacForever

The problem I have with bobcat is ground clearance ,and The track loaders are just skid steer’s with the wheels taken off, doesn’t have independent suspension. You can keep the bobcats.

@bobcatron609

4 жыл бұрын

Since 2015 bobcat under carriage frame is fully welded, not bolted. Ground clearance is absolutely perfect. I have 2. 2018 bobcat t595. Roller suspension. Air heated seat, ride control, sjc . Rides like a caddy . 8500 ibs machine lifts more and has more reach than cat 259d being 9000 lbs. 74 hp doosan engine has great power , quiter and better on fuel than my older t650 with kubota engine, visibility is great , heat and ac is great .

Basically copied what CAT has been doing for years. Torsion axle suspended u/c, air flow out the top and traditional inline mounted engine. The cast arms take away the ability to easily fix with welding like you can in a fabricated steel arm. All of this goes against what bobcat has designed and marketed as the best design in the industry in the past. Seems to be going against what they have been doing since their inception. What I see is Doosan has taken over and completely changed what people like about Bobcat.

@philiplogemann314

4 жыл бұрын

taylorstevens91 they have said it is cast steel not cast iron, which means you would be able to weld on them

@worktime8847

4 жыл бұрын

The old bobcats were lasting too long

@tommyw.9424

4 жыл бұрын

They even decided to go for the weird futuristic logo design on the machine too!

@joenobody2580

4 жыл бұрын

Cat uses ASV torsion bar high ground clearance design.

@guitarplayr1991

4 жыл бұрын

@@joenobody2580 on their MTL's they do (257, 277) but on their CTL's (259, 289) it's their own design loosely based on a traditional dozer u/c.

For real we’re did you find them. I been an operator for over 20 , currently I run gps for the 4 th largest construction company in North America and the only people that operate like that are not operators. I would definantly find a real operator for representing my product.

My next machine t76

The k series was the best

There taking alot of ideas from Cat

@jessep7943

4 жыл бұрын

Anthony Evers they’re**** and no they aren’t.

i still think the new series of cat are better. 289D3 is insane a skidsteer and dozer in one

Looks like a white Kubota

What about the doosan engine on them!!!!!!!

These operators stopped at the local pub first.

Cast breaks sorry when I heard that totally want to go another direction.

I dont care what it is. Lexan still won't stop a log from coming through like the cage will. I have experienced first hand what a careless guy on a excavator can do.

супер класс

Who in the world that has ever operated machinery thinks that a lighter machine is a good idea. I mean other than transport. Like Any most companies once they get a decent customer base get their reputation they start thinking of ways to make stuff cheaper and cheaper but it look cool.

@jessep7943

4 жыл бұрын

David Little The r-series loaders are actually heavier than the current m-series loaders.

@tinknal6449

3 жыл бұрын

What makes you think this is a lighter machine? The cast steel in the loader arms actually makes them heavier.

Bobcat sold to doosan in 2006 a Japanese company

@jjmiller1515

4 жыл бұрын

Doosan is Korean, not Japanese.

@transbam4502

4 жыл бұрын

And it was 2007 not 2006

Buy CASE

They look a lot like cat and asv

I don't like that the rear door isn't solid. Bobcat owned the demolition sector because of their durability and protection.

@brandoncrimmins6296

4 жыл бұрын

Durability? You're thinking of Caterpillar... Bobcat is, has and will always be crap. Far too many hoses to be "durable". Just yesterday our year old T630 blew the supply line to the hydraulic valve. And lost all of its fluid in the bottom of the chassis.

@nickestes1839

4 жыл бұрын

@@brandoncrimmins6296 yeah I'm talking about before bobcat got bought out by doosan

Who has the 5 year old in the operators seat?

Wow with the engine in the rear still ....instead of a well balanced machine

@jesseschultz6512

4 жыл бұрын

Counter weight, With a mid mount engine you would just need more plates for weight in the back otherwise a small load would tip you forward

@oscarballesterosguzman5345

4 жыл бұрын

@@jesseschultz6512 I know especially when dumping or having a breaker

@justinmitchuson8992

4 жыл бұрын

oh hell, can they just produce the t190 one more year so we can buy a decent machine.

Showcasing their one piece cab design (stolen from Caterpillar) by operator dumping dirt all over it. Nice!

Looks like a bunch of rookies running those machines, I love my 2011 t190.

Seems like a cat with white paint

The loader was taken from Caterpillar skid steers design, it's obvious.

@IndependenceIron

4 жыл бұрын

Looks more like Kubota copy. The arms don't look as weak and flimsy as the CAT loader arms are, and the cylinders are more vertical than Cat.

@CumminsCat

4 жыл бұрын

@@IndependenceIron our 262c2 cats have been put through their paces and have never had any issues out of the loader arms being weak or flimsy. They've had a rough 3k hour life so far.

@IndependenceIron

4 жыл бұрын

Glad they are holding up well and they should hold up. The C and C2 has a better loader arm design. The D series are the ones having issues.

@CumminsCat

4 жыл бұрын

@@IndependenceIron I would figure so since it's lack of arch support with it being so straight.

@tommyw.9424

4 жыл бұрын

@@IndependenceIron D series had issues when they first came out, they haven't since

Sure will works great with our grading blades!! www.grade-blade.com

obviously just random people at the facility trying the machines.

@torquiloers3966

4 жыл бұрын

and a women at that lol. I can't stand it. It's TORTURE!!

I’m in Houston there’s several dealerships around town if you want a part that the other one has they charge you to bring it and overpriced to begin with. Lansdown moody wich sells kubota does not savings of at least 50 bucks per whatever you want even the most inexpensive part they’ll just bring it

still do not have autoleveling......

Redesigned cooling system for the tier 4 garbage that’s runs hot as shit

Is the servicability any better? Or are they still a bitch to work on?

What about maintenance, have they made that easier? I mean -- if you cant say a few words about that, GTFO.

If they haven't brought me on to help, then I can assure you it's not even close to the best skid loader ever

Bobcat aka want to be Cat

The " operators " look like they have never operated a skid steer before, especially the guy driving across rough ground with his bucket raised above the cab, sloshing dirt all over himself. That is dangerous, as well as stupid.

Lol what are the chances that the place was built with a different skid steer

Cast steel arms eh ? Lets put a hammer on the front and start jackn concrete and rock. Hows about a mulching head. Does it come with a free winch to go with the 6" of ground clearance ? Im sure when the bucket is full and the torsion bar flexes its going to drop to 3". Your engineers missed the concept of using tosion bars to raise the ground clearance. I would fire them all and hire American mechanics to redesign it. Good thing you didnt show the engine compartment im sure it would scare anybody trying to work on it, or just trying to change filters and oil. I am interested in the air ride seat though, might try to adapt that to my 05 pre global obama emission cock suck ASV. Your gonna need that 50% extra cooling capacity to try and get through a day of sucking dust and all kinds of crap through the back of the machine instead of blowing it away helping clean air through the top. Does it have the hippie piss def fluid system where one spec of dirt from the environment the machine works in shuts the whole motor down ?

The interior overview ended abrubtly.

By "Bobcat Engine" of course they mean GUTLESS Doosan engine...

I was all into the new Bob cats until I saw the same pull out cab door why won’t they make it a pull up door? I’m out

@dirtmover6190

4 жыл бұрын

Cooper Wilkes Excaclty cat and bobcat need to copy Kubota slide up door I had to take the glass out of my 289D cat one time, it’s not fun trying to get it put back

@dillongrimm8560

4 жыл бұрын

@@dirtmover6190 If bobcat and CAT copied Kubota when it comes to the door they would lose a lot of customers. Kubotas doors loosen up with time and become VERY annoying with vibration. Glass falls out. Also, CAT and Bobcat have a very neat cab layout. Where as Kubota is very sloppy because they have the rail system for their door. Cat and Bobcat have everything laid out in front of the operator. I agree, they need to design an alternative. But not necessarily the same as Kubota.

I still wouldn't ever own a piece of Bobcat equipment.

@brandoncrimmins6296

4 жыл бұрын

Wise decision! They are terrible. Especially since Doosan took over.

My 13 year old Daughter could run that better lol

This makes Bobcat look bad 🤦🏻‍♂️

Oh i dont like this Design

Nice machines... terrible operators... LOL.

Looks cramped on the inside no place to put a drink or hold a cell phone poor design m

Wont buy a new one until def is gone

@bobcatron609

4 жыл бұрын

There is no def under 75 hp

I was watching the skid loader and I was thinking to myself what an idiot driving this level the fucking bucket. It’s a woman btw

They are ugly. Also what happened to the full cage along the side I do clearing which will break that glass in no time. Please tell me this is a joke.

@jesselowman6881

4 жыл бұрын

Its not glass. Its Lexan so it will not break.

@joedirte716

4 жыл бұрын

These machines are ugly

Over priced, over censored, over computerized and prone to computer failure @ $2k a pop. As a 30 year owner of several models these are garbage designed to steal your profit on service calls specifically to dealers only. The dealers are no longer open Saturdays or after hours service needs, Mon-fri 8-5 only and no parts in stock.

The operators on this video are horrible

Bobcat showing zero shame copying the design of the Cat. The Bobcat engineers are just glorified copy-CATS :)

What the f*** did you do to bobcat why are you messing with the machine go back to the old style start building more of them stop messing with the machine a t190 why are you messing around and building stupid machines like the new ones it's like a trash compactor now why mess with them they were selling so good back then why f*** with them keep on designing t190 was the best machine you ever had yes the bars need be welded a little better but the design was perfect why mess with it

This has to be the ugliest skidsteer i have ever seen. Never liked bobcat or running them. Takeuchi is what you need hands down have the best compact track loaders.