BMW Z4 Windshield Trim / Molding Replacement E85 E86
I replace the brittle old windshield molding on a 2005 BMW Z4. Dealerships will tell you they must pull off the windshield to replace this, and charge you around $600. This cost me 45 dollars and 15 minutes to replace.
Пікірлер: 57
Just noticed my window stripping is cracking in multiple places. Thanks for making the video, looks easier than I imagined.
@JohnEngel
4 жыл бұрын
Rich Tarquini thank you for the comment. You are 100% correct. I was worried that the windshield would need to come out but the actual process was much easier than expected. Make sure to like and subscribe.
Thanks so much for this. I have just replaced mine for £34 and it was stress free. I cleaned the roof fabric too and now it's looking like new :D
@JohnEngel
3 жыл бұрын
Awesome. So glad that this helped.
Thank you so much for this! I just noticed that mine was all cracked up today. So glad that I don't have to spend $600 now. So easy!
@JohnEngel
4 жыл бұрын
Lisa Lisa Thank you and I’m so glad that this has helped. Make sure to subscribe and check out some other videos. :)
@SoulConsession
4 жыл бұрын
@@JohnEngel i will for sure!
Enjoying the videos John! Keep it up
@JohnEngel
6 жыл бұрын
Chris Finnegan Hey Chris. Thank you so much. I have been having a blast with these.
Extremely well done, like having a neighbor show you how to replace your windshield trim. Thank you very much for the time and effort in making this video, and the info of course.
@JohnEngel
3 жыл бұрын
Thank you so much for that. It made my night. Thank you again.
An enthusiast that SITS ON HIS CAR!
@JohnEngel
6 жыл бұрын
Philip Cleobury lol. I don't do that to all my cars. This is a daily so I take a little leeway with this one.
Thank you for the video. I commented about a week or two ago, asking you if you've sold your z4 or not. Yes, I believe I am still suffering from some water leak. According to realoem, the trim you just replaced, probably doesn't prevent water entering the front of the cabin. There are two separate windshield seals underneath the trim: one for driver and one for passenger side.
@JohnEngel
2 жыл бұрын
Thank you for the comment. I did sell my Z4. It was a great car but lots of little issues. I hate that you are still having water issues. You might need to have your windshield resealed.
@hiiamyu
2 жыл бұрын
@@JohnEngel Thank you for the response again. Yea.... most likely the windshield or the doors (from the windows) since I took out the entire back carpet and seats to observe water leak.
thanks for the info
Thanks! Doing it tonight.
@JohnEngel
Жыл бұрын
Hopefully it will be super easy.
subscriber 99!
@JohnEngel
6 жыл бұрын
Thank you so much. Can't wait to hit 100 and give some stuff away. Also on the Bentley video its not an automatic but I have added a leather shift boot for looks.
Also, did your new part have some glue on it already?
Do I need the adhesive for the molding?
Having a hard time snapping in the top section. Can't tell if the what I am seeing is just the old trim that has broken apart and has stuck there. Should the new trim snap onto the body directly like the side trim does? Any advice is much appreciated. Thanks
@JohnEngel
6 жыл бұрын
JP Dizon you want to make sure that all of the old molding is out of the groove. If it's not then it will not seat itself. The molding should snap into place fairly easily.
@zzzzondi
6 жыл бұрын
Great thanks, so the trim should snap directly onto the body and not onto a black rubbery surface (that is prob old trim). Appreciate your help.
@JohnEngel
6 жыл бұрын
JP Dizon correct. Once you clean it out you will see the painted body. :)
@markwhite9295
Жыл бұрын
Go under the top molding lip
1. What is the blue plastic tool that you didn't use? 2. I have a Z4M coupe. Does anyone have experience replacing this weatherstripping on a coupe? Thanks in advance.
@JohnEngel
2 жыл бұрын
Those are called trim removal tools. The coupe has a different style gasket from what I have been told.
I just unsub'd than resub'd but I still wasn't number 100, dang! Anyways, keep um coming John.
@JohnEngel
6 жыл бұрын
Thank you and keep an eye out for my 100 subscriber drawing. I am going to put all 100 names into a bucket, or something, and pull one lucky winner. :)
You only used windex to remove the melted old adhesive?
@JohnEngel
6 жыл бұрын
Chabacano Maximus I removed the extra adhesive that got on the window with windex. The adhesive that was still in the grove was left there as I didn't add any new adhesive. There is enough pressure to hold the trim in place but a little leftover adhesive never hurt.
@cmaximus7627
6 жыл бұрын
John Engel hey thanks John. I am gonna give it a go today.
Never do this to a Z4 Coupe (E86). You'll break the windshield or at least will be unable to insert the new gasket.
@JohnEngel
2 жыл бұрын
Sounds good.
@kopiwerks
2 жыл бұрын
finding out the hard way....I didn't crack the windshield but the new one is really hard to go back in. waiting to get the plastic molding tools to see if that works
Didn't seem to work for me as the corners wouldn't fit properly so I ended up cutting it which wasn't the right answer. Any advice?
@JohnEngel
Жыл бұрын
The only other option is to use a heat gun. This should allow you to make the seal more flexible.
@clumpmonk
Жыл бұрын
@@JohnEngel hairdryer and it was in!
@JohnEngel
Жыл бұрын
@@clumpmonk very nice.
Does this require any adhesive or is strictly a friction mount?
@JohnEngel
Жыл бұрын
It’s strictly friction.
@paultavenner6464
Жыл бұрын
Thanks!! I just ordered it! Do you have a recommendation for where to buy the cowling? Mine is utterly destroyed. haha
@paultavenner6464
Жыл бұрын
@@JohnEngel Just subscribed to your channel, too. Your car looks great. I just bought a 2005 and just getting started on cleaning it up.
@JohnEngel
Жыл бұрын
@@paultavenner6464 awesome and thank you. Funny, you should mention that I looked at my cowl today and it also needs to be replaced. I haven’t searched yet but that will be soon.
@paultavenner6464
Жыл бұрын
@@JohnEngel It seems OEM is the way to go and they're not cheap parts, but important... It'll cost about $250 or so with shipping/tax.
Do you have a part number by chance?
@JohnEngel
Жыл бұрын
I do not. I ended up just buying the one off Amazon.
@studiowizard6286
Жыл бұрын
@@JohnEngel OK, good to know!
You didn't have to glue the trim in? ... really?
@JohnEngel
6 жыл бұрын
patryk996 when I removed the original trim there was the black adhesive. When I put the new trim back in, I did not add any more.