This is what I was waiting for since 10 years - THANKS!

@BillysBikeAdventures

7 күн бұрын

Just make sure you have the bike software update to date to access all the software. Initially I could not access all the options due to out of date software on my bike. Had it updated and 💥 access to all the good stuff. Thanks for watching and your comment. Cheers. Billy

Mate thanks for that gave me a very clear and concise insight in how to use the 911. Mines coming tomorrow, great vid 👍🏻👍🏻

@BillysBikeAdventures

29 күн бұрын

Thanks for watching mate. It will prove useful I am sure. A great piece of tech.

Did not know this existed until finding your video. Just got one ordered through their website, Thanks!

@BillysBikeAdventures

10 күн бұрын

Thanks for watching and hope you find it useful 👍

Can u tell us which software virsion u are running on your bike?

It’s the total nuts Even on my 2015 gsa

@BillysBikeAdventures

29 күн бұрын

Great to hear that you have and continue to enjoy your the GS911. Thanks for watching. Cheers. Billy

Been around for a while now but like all hex stuff not cheap and doesn't fix any faults!

@BillysBikeAdventures

29 күн бұрын

True, so probably not the tool for you.

@philipparana9225

29 күн бұрын

Fault code was dash not.sending message to ecu. You need a tender to put 14v to do any programming safely. Clear the code you should be good.

How did you keep the battery voltage above 12.5V when programming? I could see on the screen it was only 12.2V when you were describing the process…

@BillysBikeAdventures

23 күн бұрын

Hi there. Well spotted. I have a Optimate charger plugged in to the bike so helps when doing things like that. Cheers. Billy

Nice video!! It's possible to change the TFT screeen with OBD lx diagnostic or only with GS 911? Thanks😊

@BillysBikeAdventures

12 сағат бұрын

Hi mate. Thanks for watching and your comment. I am not sure on that one. Its these tools are interfaces for the software on the bike so very much depends what the diagnostic tool has been set up to access and I don't know what that is for the OBD LX tool. If you have one worth trying. Let me know how you get on. Cheers. Billy

I'm wondering how important the hardware is in all of this. I do have a code/diagnostic app on my iphone for my BMW car. And a independent hardware dongle to connect to about the same port as shown here. The dongle just provides the wifi and of course the read/write capability. But the magic is all done by the software. I don't doubt that here the manufacturer takes care that you really have to buy the whole set, but does anybody know if this is all necessary?

@BillysBikeAdventures

8 күн бұрын

Agree that these devices are just the interface to thew software and in that respect again you are right that the software is where the magic happens. The GS911 does provide the ability to manipulate the softeware and probably others do as well. Can't do it without them. Cheers. Billy

Nice video! If you add the sport screen can you go back to the standard screen without connecting the gs911?

@BillysBikeAdventures

19 күн бұрын

Yes you can

@jpaul4595

19 күн бұрын

@@BillysBikeAdventures Thank you, do you change screen on TFT?

My R1250RS has the sport screen which is selectable by means of the TFT menu options. No need for a GS-911 to do this. Do you mean that with the GS-911 you can code the TFT so that the sport screen comes up as the default instead of the bar graph type rev counter screen when you switch on?

@BillysBikeAdventures

23 күн бұрын

Spot on, yes. But older bikes like my 2018, will require that software update to access that 'sports' display that is an option is settings without the GS911. Cheers. Billy

@michaellowlow5802

4 күн бұрын

⁠

So only the latest software from bmw will work? Can you share your software version please? I just got the bike and don't know wich version I?have!

@BillysBikeAdventures

7 күн бұрын

023-012-030 is the software version on my GSA. Cheers. Billy

Does It come in Spanish as well? I have a s1000rr, I don't know if there IS a versión suitable for my bike.

@BillysBikeAdventures

10 күн бұрын

Yes, the HEX GS-911 is fully supported in many languages. The thing is that the language translation is done by their global network of distributors... so some languages are more UpToDate than others... especially for the sections of the GS-911 which are new (like new features from an update). These sections might still be in English... awaiting translation, depending on the language. 😁 The language selection is in the GS-911/Setup/Options page, within the Device software interface. Hope that helps 👍. Cheers. Billy

I don’t have a laptop only and apple phone and apple iPad so how could I update the software?

@BillysBikeAdventures

23 күн бұрын

Hey there. Thanks for watching and your question. The software update has to be done at a Motorrad dealer. Ask for that at your next service or see if they can do it as a stand alone request. Once that is done, the GS911 is the interface to access the functionality of that software. You don't need a laptop or computer. You can use a tablet or smart phone. Same info will be displayed as a laptop just on a smaller screen. You will need the GS911 app to do that. Hope that makes sense. let me know if you still have questions. Cheers. Billy

Can I use this in a 2016 GSA? Is it possible to activate hillholder?

@BillysBikeAdventures

29 күн бұрын

Hey there thanks for watching and your question. Click on the link below and enter your bike VIN, this will tell you which GS911 is the right one for your bike if Hex have one for that model. Ensure the latest software update to your bike so that the tool can access as much as your model software allows. www.hexgs911.com/vin-decoder/ref/BillysBikeAdventures/ Cheers. Billy

@BillysBikeAdventures

29 күн бұрын

I just tried the link but not working. Try this one www.hexgs911.com/vin-decoder/

@paulgibson490

28 күн бұрын

You talked about software updates at the dealers I was told they bmw only allow updates now if there is a problem with your particular bike? Not on demand.

@BillysBikeAdventures

28 күн бұрын

I am not sure that is accurate. I asked my dealer and no problem. May be a dealership thing but you are entitled to ask for it. If not doing it for you, poor service. Cheers. Billy

Would it work for 1 R1150GS

@BillysBikeAdventures

29 күн бұрын

Hey there thanks for watching and your question. Click on the link below and enter your bike VIN, this will tell you which GS911 is the right one for your bike if Hex have one for that model www.hexgs911.com/vin-decoder/ref/BillysBikeAdventures/ Good luck. Cheers. Billy

@OARotifa

29 күн бұрын

@@BillysBikeAdventures many thanks Billy… will surely do now.

@BillysBikeAdventures

29 күн бұрын

I just tried the link but not working. Try this one www.hexgs911.com/vin-decoder/

@OARotifa

29 күн бұрын

@@BillysBikeAdventures I tried it myself and it didn’t work, so I was trying to find my way round. Many thanks once again. With this, u have just made me committed to the channel.

Didn't work well on my R18B

@BillysBikeAdventures

23 күн бұрын

Oh no really. What was the problem?

None of this works on a K1600...

@BillysBikeAdventures

8 күн бұрын

Have you got one and tried or experience elsewhere?

@reubinthornton

8 күн бұрын

@@BillysBikeAdventures Yes, I was on the pre-order for a GS911wifi Pro. The Hex GS911 Forum has several others reporting the same as me, the features you describe do no work on any K600 '22 or newer with a TFT. I've opened a ticket with Hex code and there has been no response/fix.

Thanks for that i was wondering if i can change the display on my bikes! I can't even begin to say enough great things about the GS911 it has saved me over 1000$usd since i bought it ...I had a throttle go out and i was able to program it without the dealer . I had to take apart my 2019gs engine and fix a 1-way starter clutch bearing issue and re program 2 sensors in the process it is the #1 must have tool for BMW GS owners, if anyone wants to know what its like to take a BMW 1250 Engine apart check out this video kzread.info/dash/bejne/nYOKtcymhZmog6g.html

Not sure why its called a 'Display Upgrade' rather than 'Display Option'. Still, thanks for the display but not for me.

@BillysBikeAdventures

28 күн бұрын

Hey mate. Thanks for watching. Just a play on words. Cheers. Billy