Love the indicators!😍

@MotoWrenchers

3 жыл бұрын

Thanks bro 😍👊

I really like the northern German landscape.... nice intro! 🫠 And having some Punks like Andi around the corner is definitely a plus..... although when he plays with brake cleaner, things can escalate...😎🤣 Dear Joshua, forgive me for asking a stupid question: is it seriously motogadget's intention to drill out the handlebars for these extremely stylish indicators? 🤔.....

@MotoWrenchers

Ай бұрын

Northern Germany definitely has it's pros and cons. At the moment (late spring) it is beautiful. The rain from the side is something I could have a little bit less of hahaha :D Andi is a unique character that often comes up with explosive ideas. Great to have him living just around the corner. I've learned a lot from him already. Regarding the handlebars' ID...no, that was my mistake. I can't imagine that that is the right way to do it. You are supposed to use handlebars made of steel. Then the indicators and the mo.button fit. At some point I ordered a new one. Already after the first project, my parts collection is growing...which I very much like. At some point I'd like to have a spare parts collection like Andi. He can probably build not just one but multiple custom bikes just from his parts collection :D

Really great video, the problems you encounter are extremely recognizable. Nice that you also go into what happens in your head/mood when you encounter them. Keep it up!

@MotoWrenchers

Жыл бұрын

Thank you so much for you comment, Luc. I had to take a break to finish my master's program but will be back with new videos in October. Are you also building a custom bike at the moment?

Joshua, this series is really appreciated! Your sincerity and the will to figure things out, while documenting the process, is inspiring! I'm checking out an '83 R80RT tomorrow! Best regards from the West Coast of Canada!

@MotoWrenchers

Жыл бұрын

Thank you so much for your encouraging words. How did you like the R80RT you checked out? I'll continue posting new videos from October onwards. Had to take a little time off to finish my studies. All the best to Canada!!

@ceperformance

Жыл бұрын

@@MotoWrenchers Thank you so much for your reply. I bought the R80! It's a brilliant and beautiful bike. I look forward to your continued series. Best wishes returned.

@MotoWrenchers

Жыл бұрын

That's awesome!! Congrats on the new bike 🙌 Are you keeping it stock or will you customize it?

@ceperformance

Жыл бұрын

​@@MotoWrenchers Thank you! So far, I've had to go through the carburettors, and am waiting for a wider and slightly taller handlebar to arrive. Some of the Siebenrock kits have caught my attention. I like the idea of greater engine oil capacity, and the big bore kit-that will come later:) Did you get new tires/tyres mounted and balanced? If so, what size? Thank you, and best regards!

@MotoWrenchers

Жыл бұрын

Thanks for the update. The big bore conversion sounds amazing. I don't know if you already have considered it but a nice little upgrade that isn't too expensive and would go very well with the increased power are progressive fork springs. I haven't installed my but I've heard from multiple people that they are a game changer. Regarding tires, I went with Heidenau K60. Here are the sizes: 130/80/18 S & 100/90/19 S Unfortunately, 130 is the widest that fits in the back (I would have liked a slightly wider tire). Are you also thinking about changing the looks of the bike? Keep me updated regarding your progress if you like :)

Literally purchased a 88 R80 today and expecting delivery in a few days. Will be starting my own journey in the near future so I look forward watching yours first. Keep it up!

@MotoWrenchers

3 жыл бұрын

Hi! That sounds great. Congrats my friend :) Do you already know which style you'll go for? Let me know once it has arrived 😍

@silvertrust32

3 жыл бұрын

@@MotoWrenchers I'm not 100% but I keep coming back to look at the ROA R80 build. Just looks like Perfection

@MotoWrenchers

3 жыл бұрын

Nice :) The color on that one is amazing 😍

Seriously enjoying this series! I just bought a bmw R80RT and finding great inspiration from you! Good luck with the build! Cheers :)

@MotoWrenchers

3 жыл бұрын

Hi! Your comment just made my day :) Thanks for the great feedback. Really appreciate it. Congrats on your new bike! What are your plans for it? Have fun and enjoy you RT. Cheers - Joshua :)

@RestoreMore

3 жыл бұрын

@@MotoWrenchers Hey Joshua :) No problem keep it up! I’m going for the bobber style so will remove the subframe and install a pan seat and 450mm shocks! Going for a metallic baby bluish tank and leather accents 😎 Need to work some overtime to pay for it all tho! Haha Cheers Drew

@MotoWrenchers

3 жыл бұрын

Sounds amazing!! Enjoy the process. Haha I know the struggle...I do gardening as a side hustle to pay for all the tools and parts. But it's the struggle that makes it interesting :) What's your job? Is it one where you like putting the extra time in? Good luck with your build! Keep me posted if you like 👌

@RestoreMore

3 жыл бұрын

@@MotoWrenchers I’ll keep you up to date on how it comes along bro! Hahaha we all hustlin man 😎 I’m a mechanical technician, yeah they are always asking to cover shifts but it gives me next to no time off! 36 hours working this Friday Saturday Sunday nights :(

@MotoWrenchers

3 жыл бұрын

Damn bro! That's quite a lot - stay strong! I guess being a mechanical technician helps when building bikes, am I right? At least when the job leaves time to do so...

Great video, I am very excited about your project. The brake cleaner suggestion is a very good one for installing rubber grips. Figuring out solutions and using new techniques is one of the most exciting aspects of any project for me. Stepped drill are one possible solution to the drill chuck capacity issue . The drill shanks are smaller than the drill bit size. Silver and deming drill bits can be very helpful. Keep up the great work, I eagerly await your next video!

@MotoWrenchers

3 жыл бұрын

Hi Mark! Thank you so much for your feedback. Really makes my day hearing something like that and the stepped drills are the ones I'll go for in the future. And at some point maybe get a stronger drilling machine...one day. :) Have a great weekend my friend! Thanks again for your tips. Really appreciate it.

@markmetzger5430

3 жыл бұрын

You too my Friend.@@MotoWrenchers

Die Reifen fahre ich auch, sind super :)

@MotoWrenchers

3 жыл бұрын

Nice, ich bin sehr gespannt :)

another step forward. Very Nice 🤟🏻 I am also taking the next steps, it may turn out that we will finish in a similar time 😀

@MotoWrenchers

3 жыл бұрын

Thanks bro! Sounds great. Slowly but steadily 😍 What are your next steps?

@panpieklo

3 жыл бұрын

@@MotoWrenchers I just finished assembling the USD front end and handlebars so now I will slowly do the whole cable connection. :) I suspect that you will also deal with it soon

@MotoWrenchers

3 жыл бұрын

Nice! How do you like the USD set up? Yeah, wiring will also be one of the next steps. Just got a call from a friend today, who said I should get a new handlebar with a bigger inner diameter because he thinks there won't be enough space for all the wires. Might need to do that first. Do you have any experience with that?

@panpieklo

3 жыл бұрын

@@MotoWrenchers I sent you a few photos on Instagram how it looks :) as for me it looks much better and it will definitely be better than the 35-year-old suspension, it will improve the quality of the front brakes :) I decided to clip on it will be my choice :)

@MotoWrenchers

3 жыл бұрын

Jo Bro, just checked my Instagram messages. Damn...your bike looks so sick! Really love the set up. The pipes, the usd and the black engine. So nice. Really good work! Consider me highly impressed.

It is at these points in the project that you have to make everything a custom fit. You could have created an adapter hollow cylinder that would have fit into the bar ends, and then becomes 13.5 mm ID on the outside of the bars to hold the turn indicator. Also, for the loose button switch, you can put an aluminum strap around the bare bars to increase its diameter, then screw down the button switch to hide it. Custom outer cable lengths need to be cut, and inner cables need to have the barrel ends soldered on to be the proper length and fit to each end. Measure twice. Good luck.

@MotoWrenchers

3 жыл бұрын

Hi Porter! Thanks for your tips. The adapter is a nice idea. I'm not yet at the point where I have mechanical creativity (I would call it). But constantly working on it...and really appreciating your tips. :) Regarding the loose button switch, I've called them and they said I might have to turn one of the two pieces because they are not 100% identical. Then it should work. Need to check that. Otherwise I'll try your solution. And I'll make sure to measure twice! I'm looking forward to that. I've just ordered kits from Vanhill. Thanks again bro!

For cabling check out 'The Long Way There' on youtube - he makes custom venhill cables work for his brembo / domino brake throttle clutch setup on a R80

@MotoWrenchers

3 жыл бұрын

Hi Davioo! Thanks for the tip. I'm gonna check it out :) Every help is welcome 🙏

Sehr gut, sieht gut aus, und nur das edle Zeug verbaut ;-) Ist die Lenkerklemme noch Serie? Mit den Tools geht mir genauso, aber ich denke, wenn man bzgl. schrauben mal Blut geleckt hat, werden die Tools auch in der Zukunft noch hilfreich sein. Hattest du in einem anderen Video schon erwähnt, welchen Lenker genau du da verbaut hast ?

@MotoWrenchers

3 жыл бұрын

Moin! Vielen Dank für drin Feedback 🙏 Die Lenkerklemmen waren auf jeden Fall von Anfang an am Bike. Ich glaube, dass die original sind aber ich kann's aus'm Kopf nicht garantieren. Der Lenker ist dieser hier: www.sport-evolution.de/bmw-boxer-spezial/bmw-fahrwerk/BMW-Zweiventiler-Gabelbruecken/BMW-R45-R65-R80-R100-Lenker.html?language=de von Sports Evolution. Die Tools werden sicher noch häufiger zum Einsatz kommen. Es soll ja nicht das letzte Bike sein ;) An was schraubst du zur Zeit oder was war dein letztes Projekt?

@Juma-fw4jn

3 жыл бұрын

@@MotoWrenchers vielen Dank, ich denke, den Lenker werde ich mir auch bestellen, der sieht von der Breite und Kröpfung aus, als könnte das Bike damit gut zu fahren sein. Ich habe mir ne cx500 zum Caferacer aufgebaut, damit bin ich jetzt bis auf TÜV fertig. Und da hab ich noch Bammel, weil ich wie du gerne alles selbst probiere, und so auch den Heckrahmen selbst gekürzt und geschweißt hab. Für den nächsten Winter hab ich mir ne r65 Bj87 Monolever zum umbauen geholt, bis dahin fahr ich mit der und schauen dir zu und sammle Inspirationen:) D.h. es kann sein, dass ich noch öfters bei Teil xyz genauer nachfrage, woher du das hast :) mach weiter so, schaue dir gerne zu 👍

@MotoWrenchers

3 жыл бұрын

Ja, ich finde den Lenker auch sehr gut (ohne, dass ich ihn schon gefahren wäre). Mich hat am Wochenende ein Freund angerufen und meinte, dass der Innendurchmesser Probleme machen könnte beim Kabelverlegen. Ich habe dann direkt nach Alternativen mit gleichen Maßen aber größeren Innendurchmesser gesucht aber nicht wirklich was gefunden. Allerdings gibt es bei Louis welche, die ähnliche Maße haben (auch zum ähnlichen Preis) aber schon von Werk aus an den Enden auf 14mm aufgebohrt sind und auch so die ABE haben. Das könnte vielleicht interessant für dich sein. Wenn du willst, kann ich dir meine Teileliste per Mail schicken. Vielleicht hilft dir das :) Schreib mir gerne einfach ne Mail an motowrenchers.blog@gmail.com Wenn du das mit dem Lenker kurz erwähnst, dann packe ich dir auch die Links zu den Alternativen noch rein :) Ich finde es übrigens richtig nice, dass du dir auch alles selbst beibringst und einfach alles selbst ausprobierst. Ich drücke dir die Daumen für den TÜV! Wie hat das mit dem Schweißen beindir geklappt? Musstest du viel üben? Schöne Grüße und sorry für die verspätete Antwort - Joshua :)

Hello please send a link where you bought the gas lever and brake thanks

@MotoWrenchers

2 ай бұрын

Hi, you can find all of the parts, including all the relevant information and links where to buy, in the build sheet that’s linked in the description 👌👆

I see you have the three button switches. Did you drill a hole on both sides of the handle bar per switch (front and backside) Or only one hole per switch?

@MotoWrenchers

3 жыл бұрын

Until now I just drilled one hole in the front. I think it will be possible to run the backside cables through the same hole. I'll need to check whether it will be big enough. I'll definitely make a video about that.

@jordiuncle

3 жыл бұрын

@@MotoWrenchers thank you for your answer! Looking forward to the video and your experience with a single hole.

@MotoWrenchers

3 жыл бұрын

Sure 👌 Have a great day

What handlebar is that?

@MotoWrenchers

11 ай бұрын

It's this one: www.sport-evolution.de/de/BMW-R45-R65-R80-R100-Lenker.html In case the link doesn't work it's from sport-evolution.de, parts number: SE-40-17521-03-000

Moin, cooles Projekt mit der R 80. Aber warum machst du deinen Kanal auf Englisch soweit im hohen Norden von Deutschland. Und dann noch so einen berühmten Nachbarn wie Andi Feldmann cool 😎 den hätte ich auch gern als Nachbar. Viele Grüße aus Wolfsburg Enrico 😁👍🏍💨👊

@MotoWrenchers

3 жыл бұрын

Moin Enrico! Vielen Dank für dein Feedback 🙏😊 Ja, Andi ist echt Gold Wert. Er hat so unfassbar viel Wissen und ist so kreativ beim Schrauben. Und ich mache den Kanal auf Englisch, weil so eine größere Community entstehen kann. Es kamen schon so viele Nachrichten aus den verschiedensten Ländern über die jeweiligen Projekte, an denen dort geschraubt wird. Das finde ich extrem cool. Viele Grüße nach Wolfsburg 👋👊 und vielen Dank nochmal :)

@EK_Fish_Tank

3 жыл бұрын

Ich wünsche dir auf jeden Fall viel Erfolg mit deinem Kanal. Abo gab ich natürlich da gelassen weil ich ja wissen will wie es bei dir weitergeht 😉 Ach eine Frage hab ich noch. Ist der Andi wirklich so wie in seinen Videos. Ich finde ihn einfach nur Hammer. Bestell ihm mal schöne Grüße von mir 😁👍

@MotoWrenchers

3 жыл бұрын

Vielen Dank! Das freut mich sehr 😍 Und ja, Andi ist 1zu1 so, wie in seinen Videos. Er ist schon ein echt cooler Typ :) Richte ich aus 😉👍

Wait . . . you can't see us.

@MotoWrenchers

3 жыл бұрын

You just have to believe in it 🖖