I actually like videos like these, where it's just plain regular noises without any obnoxious music over it! Good job!

@brayanrayan8384

5 жыл бұрын

Pourquoi like pour ipegle ou bien pour outre chose comme d'abitude

@worldhello1234

4 жыл бұрын

I miss the obnoxious music. :(

The Mechanic assembling the engine shows that has experience and knows what he's doing Very Nice

No music! YOU ROCK!

Old School: No time saving power tools used...Refreshing. Well Done !

@JorgeRodriguez-po7kx

4 жыл бұрын

Oh Yeah Definitely

Though already 'biased' towards beemers, have always been struck by the quality, elegance and design of even the simplest machined castings on these things. Harleys and Japanese bikes certainly 'do the job', though everything often seems much more 'crude' and mass-produced, while here it's easy to see how the quality and precision extends to every little well thought-out detail, right down to the guts, all built and assembled with watchmaker-like precision. Well done, thx!

That is an absolutely beautiful engine.

this is ...ART AIRHEAD engine is UNIQUE thank you for uploading

Офигенно!

Wow it's a nice engine

Thank you so much for this great video

Just like the engine, your video is clean, elegant, and direct.

Again, just brilliant

Шикарный мотор, а специалист то супер. Я хочу такой мотор.

@madmax5240

5 жыл бұрын

@@ramilgilm8626 есть два штуки. Один кастом с Днепр двигателем. Второй просто с коляской.

...I've worked on a lot of the M10 and M20 engines and it's always interesting that BMW uses the same type of engineering , tensioners etc , I wouldn't be surprised that some parts from the bike are interchangeable ... M20 and M10 are very similar and easy , fun almost intuitive

There is nothing better than a good airHEAD!!!

Crazy Engine. Salaam dari Indonesia

Your editing style is incredible. The video and audio are both very pleasing. I wish I could comment in German, I hope it translates!

@NilsHomann

5 жыл бұрын

Thank you very much. I'm working on English translation.

It's an art form! Very pleasing to watch.

You should replace or resurface all lifters, they showing damage.

Marvellous. Thank you for posting this video. Poetry in motion

A master of mechanic

@NilsHomann

5 жыл бұрын

: )

Complex in understatement for this engine.

A real proffesional...!

@NilsHomann

5 жыл бұрын

Thank you!!!

Oil filter, its a factory assembly? Or handmade?

Genau das habe ich jetzt gebraucht 😎

Just WOW!

The weak link in bmw airhead engines are the camshaft followers. The ones you re installed are well past their use by date. They will destroy the camshaft and eventually the crankshaft when enough metal is generated.

Sealant . It's everywhere. Such a beautiful design))

Hi Nils, Mir gefallen deine BMW Videos sehr gut! Kannst du mir verraten, mit welcher Paste du die Dichflächen vor dem einsetzen der Dichtungen behandelst? Viele Grüße Johannes

What was the extra piece you put on before you put the oil pan on???????

Super great!

nice.. its seem like engine artwork... beauty

svidja mi se sto ste obadvoje mutavi Poenta je kako se lepi silikon (za to je potrebna velika pamet ) a niste pokazali kako se stavlja druga bregasta u fazu i niste pokazali bar na koliko se steluju ventili Sve u svemu bolje ista nego nista ....moze jedna tanka dvojka ocena za video

Uh couple thangs! Was there an airbox? What started did you put on? What started cover? What about the trans?

Good job guys

Beautiful! Thank you for the great video!😍

I am using this engine to power a single seat locally made actual flying helicopter in Sierra Leone. Can some one help me with the direction of rotation of this enginr,s crankshaft? Tks

Where do you learn all of this ? Do you recommand some book or any support for seeing and understand all the process ?

@NilsHomann

4 жыл бұрын

Most of what you've seen here is years of experience. To be precise, 12 years of experience with exactly this engine. Unfortunately, I cannot recommend a specific book, because it is always important that you like and understand the explanatory style of the explanatory.

@crackPHI

4 жыл бұрын

thank you for your answer. And sorry for my approximate english. I’m really intersting to make some think like that with cars and bikes, I do some lot of manual work but I really don’t like make thing that I don’t understand. And video tutorial are in 90% case not enough. But, ok, 12 years.. nice work !

Very nicely done presentation throughout. Appreciate the lack of arm tattoos as well.

I'm on mechaniek and i new what you'r doing, but it was very very fast forward. Very nice done.

what amazing great work to see 😮

@NilsHomann

Жыл бұрын

Thanx!

What is the material in the tube you are applying under the gaskets? Thanks!

Hello Nils. Nice video. What pistonring compressor is that you use, and i also wonder about that white stuff for the gasket, what brand is that

Well, this guy is no slacker. You can just grab a coffee while he rebuilds your engine in a few minutes :P

Ich möchte nicht übertreiben aber dass könnte auch ein „Anfänger“ im Bereich Motoren schaffen oder? Natürlich mit 1 1/2 rechten Händen und einer halben linken. Etwas Vorwissen im Bereich Simmeringe, Dichtflächen und Drehmomente sollte natürlich da sein.

@NilsHomann

4 жыл бұрын

So sieht es aus!!!

That was AWESOME!!!

Schöne Arbeit! 🙂

nice.

Awesome.

Done my share of H-D, BSA, Triumph and Japanese...Never built a BMW. Seems like such a tractor engine. Nice job regardless.

@Archer28M

5 жыл бұрын

Nemaš ti pojma šta je dobar motor.

@ironheadd79

5 жыл бұрын

@@Archer28M sounds to me like you don't no what a good motor is...Or have a clue what a fucking wrench is, I have built more motors than you've seen.

Hallo Nils, hast du wirklich diese Tassenstößel mit den Ausbrüchen eingebaut?

Geil, schaue mir nun die längere Version an!

Is the alternator driven at crank speed ?

Nice job great vidéo

How long did that take you? I have a 100/7 that i need to break down the motor but I have no idea what I'm getting into!

@NilsHomann

4 жыл бұрын

Sorry for my late reply. Even a beginner in the field of motors could do that! Of course with some prior knowledge in the area of ​​sealing rings, sealing surfaces. It is really not difficult.

Nice job, thank you.

Cool, a pushrod boxer, but I thought the newer engines all had over head cams? Nice sound effects, though.

Nice job

👏👏👏👏genial

Acho as motocicletas BMW de motor boxer a oitava maravilha do mundo, principalmente a última geração de boxers de refrigeração a ar, câmbio estanque e embreagem seca de 2012, eu tenho uma. Das de motores de cilindros paralelos, 800, 1000 e 1600 cc eu não gosto.

Amazing

ich hab mir meinen citroen 2cv gerade hergerichtet und muss sehn wie artgfleich der motor mit der bmw ist.

@Prestone44

3 жыл бұрын

Der Ingenieur Walter Becchia, der die endgültige Version des 2CV-Motors entwarf, ließ sich weitgehend vom Motor seines BWM R12 inspirieren. Dies ist der Grund, warum ich dieses Video gesehen habe! The engineer Walter Becchia who designed the final version of the 2CV engine was largely inspired by the engine of his BWM R12. This is the reason why I came to watch this video!

Hi Nils I have a 1974 BMW r60/6 that has a problem that nobody can solve. When I start the engine, the rev counter marks 1200rpm and after some time it starts to accelerate by itself until it reaches close to 3000rpm. This happens after 6 to 8 minutes. I wonder why? Thanks

@chrisbrennan8578

2 жыл бұрын

I don’t know much about BMW motorcycles , But it sounds like an air leak at the carb boots.

Nice job!? Looks great.

good job

This is filmed in slow motion so non Germans can smell the efficiency

@NilsHomann

4 жыл бұрын

: )

@kgucmen

4 жыл бұрын

Hahahaha :-)))

Für ein Motorrad sicher ein guter Motor. Leider werden die Motoren auch in Feuerwehr Pumpen eingebaut. Hier sind schon 2 neue Pumpen mit Motorschaden verreckt. Vollgas mit Belastung ist nix für Dauer.

I love the flat airheads but the engines seem so overly complex with all the specialty tools required, sealants, and hard to get to components. Rebuilding a R60/2 engine once was the last time I will ever do that.

nice Job

BRAVO ;;;;; good job

Hi Nils - thanks for the video. One question - when you assemble the rockers and spindle, the dot on the top of the spindle is shown facing outwards, but when assembled, its facing inwards - which is the correct way?

@NilsHomann

2 жыл бұрын

Do you mean a specific part in the video ? Have I possibly made a mistake? Please tell me the time marker.

@davidsnyders6797

2 жыл бұрын

@@NilsHomann Its at 3:09 shown facing outwards, at 3:18 facing inwards. I had the same dilemma when reassembling mine, so just wanted to make sure.

@toddtonis

2 жыл бұрын

@@davidsnyders6797 I saw this same difference. which way is correct please. Thanks, great video on engine assembly. video quality and lighting are excellent.

Dream TOP work!!!! 👌🏻

Хороший мотор вот бы мне в Урал его

Awesome

Hi Nils, First at all, congratulations very nice video. I like that you used the original audios... Nice. Just a question, I'm looking a screwdriver with ratchet conector on the top, do you know where I can find it? (0:27 sec) Happy New Year.

@madskilldude378

2 жыл бұрын

Every hardware store sells them.

How long did it actually take to rebuild?

Great video

Really nice😊

What did you use to clean the parts?

the oil filter relocation kit where did you get that

Just the sort of video I was looking for👍 just wish I knew how to translate into English. What make of ignition unit are you fitting? And where could I purchase one? Hoping to start on a 75/7 very soon hopefully. Cheers

Very good. Are you sound

Very cool, nice job!

Respect

Hello. Very good video and work. Maybe you can help me! I am assembling my bmw r80gs engine and I do not have the engine tightening. Do you have a page that has them or where I can find them? From already thank you very much, greetings

@NilsHomann

Жыл бұрын

Hello. Do you mean the engine mounting bolt torque?

@jcg6640

Жыл бұрын

@@NilsHomann Yeah. Tightening of connecting rods, cylinder cover, engine assembly. It's a bmw r80gs year 85. It's the same as the engine you built in the video.

ive seen dnepr and ural engines inside but this is just so much more advanced, as even with all the modern mods its still not as good

Love to see a twin turbo in one of these bikes I don't think anyone has done it

thats awsome

What was engine shell made from? Iron cast or aluminum?

@varun009

3 жыл бұрын

Al

schönes ding, wie lang hast du insgesamt gebraucht?

Зачем так быстро невосможно насладиться видео все быстро

Masterful!

Perfect 👍👍👍👍👍👍👍👍👍👍👍👍

The cam followers, looked like the case hardening had worn through.

@simonewing904

5 жыл бұрын

I agree. Surely should have been replaced.

@ton123best

5 жыл бұрын

Yep, the cam followers belong in the trash bin. Also the rotor of the generator does not appear fresh anymore. And last but not least, there is no need for the paper gasket under the oil filter cover.

Cam followers were not refaced prior to reassembly .

Cool 😃👍

I never saw the crankshaft go in.

En lo rápido que pasa el vídeo veo dos borradores saltados el cromo duro picados como se dice son los que levantan las válvulas

what did you add in the final part? is that an added sensor for something?

@NilsHomann

3 жыл бұрын

This is a light barrier (the interrupter) for the electronic ignition.

That was great!

@zefini7397

4 жыл бұрын

Was no, ever.