BMW M60 lifter noise

Пікірлер: 13

  • @raphaelnrw8876
    @raphaelnrw88767 жыл бұрын

    Hello !! Sounds the same like my m60! what i have to do please?

  • @user-ox9nl1ck5e
    @user-ox9nl1ck5e8 жыл бұрын

    how to solve this problem?

  • @zookinthe6ix461
    @zookinthe6ix4616 жыл бұрын

    Not lifters. Chain guides.

  • @brittapetersen4604
    @brittapetersen46047 жыл бұрын

    Rebuild

  • @whiskeyactual.
    @whiskeyactual.10 жыл бұрын

    Sounds like my N62. I'm actually happy to say this because I was afraid I bought a car with a bad piston/cylinder.

  • @casanovaevren

    @casanovaevren

    8 жыл бұрын

    sounds like my n62.im removing valve covers to check lifters .

  • @whiskeyactual.

    @whiskeyactual.

    8 жыл бұрын

    ***** Make sure you replace the valve cover gaskets while you're in there.

  • @casanovaevren

    @casanovaevren

    8 жыл бұрын

    +Ghos7N54 I'm afraid it's oil bolts now after 4 hours of removing valve cover ticking noise coming from drivers side only

  • @whiskeyactual.

    @whiskeyactual.

    8 жыл бұрын

    ***** Atleast you were able to narrow it down to just one side.

  • @casanovaevren

    @casanovaevren

    8 жыл бұрын

    +Ghos7N54 lol

  • @altonbrown8375
    @altonbrown837510 жыл бұрын

    ever fix it ? a good way to fix the lifter noise is to take out about a quart of oil and put atf if and run for 20 min at idle let cool run again same way then drain put new filter and oil in that's what I did to solve my lifter problem may or may not work in you case just an idea .

  • @miguel760t

    @miguel760t

    10 жыл бұрын

    it actually ended up not being a lifter noise. a common problem on the earlier M60 BMW V8s is the oil pump bolts weren't torqued properly from the factory and have a tendency to back out. dropped the pan and found 3 bolts that loosened up, tightened them all down with loc-tite and the noise went away

  • @altonbrown8375

    @altonbrown8375

    10 жыл бұрын

    ok good glad you found the problem