I learned more in those 2 minutes than i willingly wanted to learn in school 🤣

Drinking Game: Every time Gustav says “Yeah” or “Yep” take a shot of Tequila.

@gtboard

2 жыл бұрын

Yep.😁😇

@carlgeorgtsigakis498

2 жыл бұрын

Hehehheheehehehe

@colbyarbar

Жыл бұрын

😵‍💫

@AndrewJaws

Жыл бұрын

I think we'd all die.

Dude this guy is a real worth engineer where you can buy parts with no doubt jeezuz..

The guy is absolute wizard🤭 If there was a therm "Scientifically build S85" to make it last longer than 50k miles (even that is a veteran), this would be it.. And one more word missing here!?!? EXPANSIVE😉

@masonblatz3843

Жыл бұрын

How much longer does it last??! I’m thinking about buying one at 81000 kilometres

@iTrinityPlays

Жыл бұрын

@@masonblatz3843 Rod Bearings, Throttle Actuators, Oil Scavenge pump, and Vanoss bits(You could also install a Vanoss delete kit). But should have zero issues with the motor after those things, and the right and proper aftermarket rod bearings are installed. The SMG trans however, is pretty dramatic and fun to drive at high speeds and acceleration. But terrible in pretty much every other way, including insanely expensive maintenance. If you can find one of the 1400 Manual 6 speed equipped E60 made for the US. I'd highly recommend it for fun and maintenance reasons.

These guys build brilliant cars. The M6 they built years ago is beautiful.

Very informative!

You are watching a master.

Do these engines have the same rod bearings/ rod bearing problem as the stock engine? I’m looking at buying a 80,000km m6 tuned by dinan but don’t know if it’s more of a risk then a stock m6

Is it possible to make a custom crankshaft for the S85 so that it has even firing order like the Gallardo?

Theese guy never grew to the size they deserve!

@gtboard

2 жыл бұрын

Dinan where so knowledgable and enthusiastic.

Thanks!

@gtboard

2 жыл бұрын

Thank you!

Holy moly v10

Holy grail v10

I hope they still sell them when I can afford to buy it

More 🤩🤩🤩🤩😍😍😍😍😍 S85 ///M legend

New BMW V10

what does all this do for my 2008 M60 M5 ????

Do they still sell/rebuild motors ?

@whiskylitt8880

Жыл бұрын

Yes in San Jose California. His new company is called carbahn

Love this guy! True engineer. On The Smoking Tire channel there is a good podcast with Him and Matt Farah - i recommend it!

What’s the bore & stroke?

I wonder what do these guys do now are they still around?

@gtboard

2 жыл бұрын

Still around! www.linkedin.com/in/stevedinan/

@jareknowak8712

2 жыл бұрын

There is a podcast with Him on The Smoking Tire channel - i highly recommend it!

@asefabone

2 жыл бұрын

Hey MR; yes, we are still around !-{) Not that F&#king old yet!... Mr. Steve Dinan is running his business at the same facility in Morgan Hill, CA where we built these monster V10s back in the day. I just finished a 10 year stint as an engine inspector / trackside engineer with INDYCAR where I tried to keep Honda Performance Development & GM/Chevy/Ilmor Engineering in check, making sure they play nicely inside the sandbox (IMS Oval) and the other 17 races during the season.

How long is the drying time of the sealing product? I have applied the How long is the drying time of the sealing product? I have applied the product but it is not completely hard like when we open the engine block, it stays like silicone. Thanks a lot but it is not completely hard like when we open the engine block, it stays like silicone. Thanks a lot

I know it's an age old argument, but...10w60 or 5w50 oil, in a stock V10 with recent rod bearings...anyone?

@robi4387

2 жыл бұрын

Every garage I know only uses 10w60. I always carry a litre of the stuff. If the rod bearings are recent then they should be the new design and you are golden. Old or new bearings no difference to the oil you should be using. The only place I have come across folks thinking using anything other than 10w60 is a good idea is on KZread.

@Bimmer_Bill

2 жыл бұрын

0-50

@gtboard

2 жыл бұрын

Always Castrol 10W 60 😎🇩🇪

@SJWetz88

2 жыл бұрын

10w-60 unless you want VANOS codes

@artbrookey3468

2 жыл бұрын

Exactly...The main reason for the 10w60, from what BMW M division told me has to do with the Vanos system, but you can't tell back yard mechanics that

So do the dinan v10s last longer then the stock engine?

@gtboard

Жыл бұрын

Could very well be!

@gtboard

Жыл бұрын

@@iankowalczyk745 Any problems?

Lovely video! Now upload a stroker V10 that we never seen before! “Title it DINAN STROKER GOING BESERK IN SWITZERLAND”

How old is this video? it's very informative

@asefabone

2 жыл бұрын

The video was shot back in late 2007 ~ early 2008 when Steve and I were just starting the build program to the Stroker V10. It was a great project to work on, he had this idea & vision and pretty much let me run with it. Thanks for posting again GTBoard!

@gtboard

2 жыл бұрын

Some mpre here as well! I added ypu on LinkedIn very impressive project you guys pulled pff there!

@gtboard

2 жыл бұрын

Also mpre here kzread.info/dash/bejne/X22Nm9iPcrrJdso.html

@gtpseries

2 жыл бұрын

@@asefabone build my v10?

I thought it was a 5.8

STOP SAYING YEAH FFS

@gtboard

Жыл бұрын

Yeah.

great video but , the million yups get in the way of the info steve is giving AND IS VERY VERY VERY ANOYING . YUP

@gtboard

Жыл бұрын

Yup.

Boy,has BMW screwed the customer by using this process on the block. With the chronic issues this engine has,any problem in the bore means you have to buy a new block. Another reason I will never buy another BMW.

@HaloHamstur

Жыл бұрын

Yeah I don't know why he had so much excitement over it

If this guy says yuh yeah yep one more time I’m gonna FLIP can’t even enjoy the video

@gtboard

Жыл бұрын

Yup🥸

Jeez stop talking over Steve.

@Junglefever71

2 жыл бұрын

Absolutely, great info from Steve

boring