That was fast :D I didn't wanted to sound offensive or anything like that in the previous version, just wanted to make it clear. Really nice videos guys, with a lot of information which is almost impossible to be found anywhere else

@RacingDiffs

2 жыл бұрын

Not at all, mate! I appreciate your reaction and comment. Really, thank you. That was a mistake. Thank Good, we had 2 takes of ending😆

Bas lepo videti da postoji profesijonalan servis poput ovog u Srbiji!

You guys are great!

@RacingDiffs

2 жыл бұрын

Thank you❤

Great video! I see that for the carrier preload you used two bolts two bolts for each carrier side. After you find the preload, will using all the required bolts for the carrier flange affect the carrier preload? Only because i would assume the initial two bolts are not exerting the same amount of force equally the roller bearing. Lastly, are the carrier flange bolts torqued or just installed to be snug? Im currently redoing my diff and this would be very helpful to know. Thank you!

@RacingDiffs

2 жыл бұрын

Thank you for your feedback. Those 2 bolts are enough to keep cups pressed so you can adjust preload. After the procedure all bolts are mounted. Torque spec is 40Nm. Also use sealant compound on 2 bolts closest to the cover as their holes passes through so oil knows to leak there.

Cao drize imam pitanje imam merc 124 gledam imaju neki lsd diff sta to znaci i kako oni finkcjonisu

Great video guys! I plan to order schims and clutch pack from you guys soon. Is there a reason for you increasing 0.1 on one side and 0.2 on the other side?

@RacingDiffs

Жыл бұрын

Thank you, glad you like it. That is when you are finding the best option for carrier preload and carrier position ratio.

@flamurabdiji2306

Жыл бұрын

@@RacingDiffs so sometimes you need to increase more on one side? Is this correct?

@RacingDiffs

Жыл бұрын

To get optimal results, yes.

@flamurabdiji2306

Жыл бұрын

@@RacingDiffs thank you so much for the answers - you guys are great! Is there anyway to know when I need to increase more on one side? And which side?

@RacingDiffs

Жыл бұрын

You're welcome! Actually no. First you adjust preload, then go for position.

Hello and thank you for your videos. Ive just rebuilt a 188mm diff and i was told to set carrier preload to just over 1nm. After watching this video i need to ask. Is this too much and should i rectify this or have you set up diffs with this much carrier preload before. Is this much preload too much? Many thanks for your time.

@RacingDiffs

2 жыл бұрын

Actually, it is not too much so you should worry about it. Eventually it will break in to 0.7Nm, which is fine👍🏻

@koutros100

2 жыл бұрын

wesome, thank you so much I was a little worried about it. Also your shim pack was excellent Made it very easy to set up the diff correctly What would be your max torque setting for lsd for street and a little circuit racing My one has 230 nm with a 4 clutch internal Machined top plate to fit it all in Would this torque create wheel chatter while turning on the street? If this is too much what do you recommend Thank you so much for all your help I really appreciate your time, Your knowledge and your sharing of your knowledge. George k Syd Australia

@RacingDiffs

2 жыл бұрын

You're welcome! I would say 230Nm is too much for the street and circuit. For drift, it would be okay. So grind the cap a bit more or use thinned preload shims. We have them available in 1.5mm thickness. I would aim for 120-150Nm.

@koutros100

2 жыл бұрын

Thank you and god bless you Love your work, I’m sure when I say this I say it for a lot of people THANK YOU👍

@RacingDiffs

2 жыл бұрын

Thank you so much! Support means a lot to us!

just to make sure I understand, so you go on 0.1 increments on both sides, correct?

@RacingDiffs

2 жыл бұрын

Yes. Until you get close.👍🏻

i have a question... Can LSD type 188 with 2.93 to be converted with 3.15 or bigger ?

@RacingDiffs

11 ай бұрын

Yes, it can. 👍🏻 You need a ring gear spacer and adjustment shim set. Check links below: racingdiffs.com/collections/differential-tuning-parts/products/bmw-differential-crown-ring-spacer racingdiffs.com/collections/differential-tuning-parts/products/bmw-differential-backlash-adjustment-shim-kit

@420RecordsLifestyle

11 ай бұрын

@@RacingDiffs thanks for the fast answer i will prepare to buy them after 2-3 months #RacingDiffs 💪🙌

Hello guys, can't find the video doing Gear Patch & Backlash.

@RacingDiffs

Жыл бұрын

Try this one. kzread.info/dash/bejne/gWxoxpKyXdnMcto.html

@angelurzua2574

Жыл бұрын

@@RacingDiffs Thank a lot, I will check it now !!

so i need to find a cheap good used torque wrench :)

@RacingDiffs

2 жыл бұрын

It's important to be precise and good quality. 😉 price is not so important