Hello Mark, thanks for sharing the video! After the new battery being installed, the programming has to be done to let the ECU know that the car getting a new battery. If this does not get done, the car ECU would still think the battery was old, and the battery might get overcharged. It might result in pre-mature failure for the charging alternator and the new battery. Thanks, Edward Wang

@ECPP

3 жыл бұрын

Thank you very much and you are right so that’s a great message for anyone doing this repair.

@Misstisha25

3 жыл бұрын

How exactly do you program the new battery?

@Del-ok8uw

14 күн бұрын

Just got my 2015 x5 battery replaced did it myself . Funny there’s two batteries in the trunk . The main big battery and a smaller one , go figure. Anyway took it to European car dealer and they reset it for $44 dollars . Hope this helps.

Thanks for the instructional video. I bought a 95ah battery from Costco and it installed perfectly into my 2011 X6. I then used Carly to register the new battery. Afterwards all that was required was a new time set and short drive to set the 4x4. Easy.

Just completed 2014 X5 battery replacement with a H9-AGM battery. No any warning and registration reqirement prompted. Every thing works as before. Thanks.

What about ventilation tube??

Mark, you had mentioned your battery failed many times due to glow plug system. May be because you didn’t program the battery? The system will overcharge the battery and kill it early

Thanks for the video. No vent line?

I didn't register the battery to the car. The intelligent battery sensor blew up and cost me about 800CAD to fix it ( 500 the sensor plus 300 diagnostic and labour )

Thanks brow

Performed this yesterday, there will be codes that pop up even if you did everything right, but they will go away after your first drive. But you Will and Should visit your dealer or factory trained tech for a battery reset! Even they company (Excide) where I bought my battery recommended this.

You need to register the new battery in the ECU. And if the amps are different you'll also have to code it. Otherwise your battery lifetime is under risk.

Is there a video on changing out the power steering pump on a 2008 e70?

Great job. Thank you

Thank you ! I'm doing this on my 2013 X5 tomorrow :-) Great tutorial .

I used the Carly app to reset the battery, highly recommended if you DYI or get it done outside the dealer.

Interesting and detailed video for a battery change. +1 As a fellow e7x owner, dont forget to code your bootlid to close upon any signal than just the trunk button. It's so s*****

Hallo I have a question, more like help lol, I tried jumping my battery because of the cold weather, from the back inside the trunk I did it twice the first time it worked out got it charged and started, the second time tried doing it the same way and I tried to start it and the dash and center triangle lights were just flickering, and the key piece got stuck inside ignition, I have a e70 x5 2007, do you know what I did wrong, could it be the battery not getting any juice anymore when I charge it.

Thank you!.

@ECPP

4 жыл бұрын

Cheers

What is the name of that ‘orange plastic T-shape’? How and where do I order that? Mine is missing in my trunk. Thank you

Japanese car connect it back and drive but I heard on BMW you need to program it pls let me know thanks

Mark, I hear the FRM footwell module may blow if power is interrupted. Any truth to this?

Oh I didn’t see you mention anything about coding the battery do I need it

Thank you so much for sharing this useful amazing tip. What is the black steel long with BMW located at the socket next to the Battery. I brought used car, i don’t have it. Thanks Jay

@maxflight777

4 жыл бұрын

I’m curious too !

Forgot the most important part, if you don’t code the new battery into the computer it will fry it. The car thinks it’s a 5 year old battery and will overcharge it.

@themachine8009

2 жыл бұрын

Can I register it with a cheap scan tool or does it have to be the one from the stealership?

Is it possible to fit a dual battery system in a E70 x5 without confusing the ECU?

Hi Mark, I had my 2012 bmw x5 battery fail in our recent minus 30+ deg C weather. It was down outside for about a week. When it warmed up I finally got it inside and replaced the battery with a new AGM. Everything went well, thanks to your video, but now I has a “passenger restraint system failure” message and air bag light on. I think this is likely due to the bad battery - low voltage. I tried scanning with my OBD 2 scanner but nothing. Do you have any experience with this and how to fix?

@ECPP

2 жыл бұрын

Hi Vince l, sometimes after driving the car a few miles, these faults disappear. Also, you may need to get the battery coded so the computer life resets.

Alot of people commenting about programming. Is there programming involved or any other thing thats missed out after installing a new battery?

@gilgonzalez5902

3 жыл бұрын

Yes it must be programmed via the scan tool, if not you will have issues in the long run because these vehicles use an intelligent battery system or IBS which is what that big red unit is on top of the battery.

Connect the negative terminal last of all ! Keeps everything safe whilst using tools around the battery

@ECPP

4 жыл бұрын

For sure, thanks for watching.

What type of model battery will fit A bmw E70 x5

When you changed the battery did you have to register your battery? Great video.

@ECPP

4 жыл бұрын

Yes you do

Mark, you do good videos but really lack the technical knowledge to prevent others from making horrible mistakes. Appreciate it but you REALLY need to show folks following technical bulletins. Physically replacing the battery is easy but as others have commented, which you fail to reply or acknowledge, ensuring proper programming is key to long battery life.

@ECPP

3 жыл бұрын

Thanks

What about the program....need a program computer or something like that when do you change the battery....tanks

@mar10o

4 жыл бұрын

You can use inpa to register new battery. It's easy task, just go to engine and then ibs power management, next use register battery change

When replacing the 07-13 x5 battery, do I need to take the x5 to the dealer to get it recognized to the vehicle?

@ECPP

Жыл бұрын

It really should be coded. There are aftermarket options too

my e70 X5 needs a new battery. time and date reset every time I leave it for a while. so annoying

@mcplutt

Жыл бұрын

And you never charge the battery?

Just want to know how reliable are these x6? Planning to buy 2010 model.

How much is that battery?

Ppl don’t forget to register your battery...it’s not a option..it’s a must

@charles55094

5 жыл бұрын

how do you register a battery

@kethaspittah06

5 жыл бұрын

Charles Feagin you need a scan tool to register it..or find someone you know that has one.

@bmw12347

4 жыл бұрын

@@kethaspittah06 do you mean a obd2 scanner?

@gilgonzalez5902

3 жыл бұрын

phewyl yes but it has to be BMW specific.

what about coding new battery? your car need to now you have put new battery as there is inteligent charging system. Failure to do this will cost you new battery soon

@javiert8827

6 жыл бұрын

Monika is correct. You have to have someone with BMW systems access and Reset the battery charging Logic board. So that it charges the new battery a lower rate than an old battery. Right now the board is charging the battery at a higher rate because the last battery was dying and old.

@charleschenhua

5 жыл бұрын

I did this on my own, bought program on eBay with interface cable, search for video on KZread on the instructions for BMW DIS. You will need a system with Windows7 though. Dealer charges $50, but it’s a 1 minute job.

@lollipopmyfavor

5 жыл бұрын

@@charleschenhua Hey Charles, Can you post the Ebay and youtube link? Dealer charges way too much for a simple E70 battery change! Thanks in advance

@charleschenhua

5 жыл бұрын

@@lollipopmyfavor Search you tube for register BMW battery and view a few video before you start.

I heard that you need an auxiliary 12 v battery hook up so not to mess with the computers

@mar10o

4 жыл бұрын

Nah, not needed, just need to drive straight for few meters and do full turns on the drive wheel and all errors are gone.

I’ve been told that you need to register your battery

Do we need to register the new battery or not ???

@ECPP

Жыл бұрын

Yes

Why not show the actual removal?

You forgot about very important stuff. When you change for new battery you MUST do the battery adaptation in your computer using the OBD port. Otherwise you vehicle will not know about new battery installed and you can damage the battery very quick.

My BMW X5 2007 needs to fix the screen washer tank anyone knows how please Many thanks to u all

@eggsandham2245

5 жыл бұрын

Don't know if it's the same as a 2007 X5, but I recently replaced the washer reservoir (and pumps) in my 2011 x5m. Apparently it's fairly common to have algae growth in the tank and it clogs up the pumps (there are two pumps - one for windshield washer, the other for high pressure headlamp washer). It was quite an effort to get access to the reservoir (inside the front right wing, aft of the wheel well. You'll need to remove the wheel well covers, wheel well surround, you'll have to loosen the front wing, also the whole front end / bumper (both sides), also the rocker panel (under the doors) on right side as well as the windshield weather strip where it meets the wing. It's a considerable amount of work but entirely do-able if you're careful and deliberate. Far better than bringing it to a bmw dealer - my experience is that anything done at dealer workshop is extremely expensive (at least on an M). Biggest obstacle was the fear of getting started. Genuine parts (the reservoir and pumps) can be purchased at auto parts at a fraction of the cost at BMW parts center.....and order a box of plastic push-snaps online.

where is the emergency boot opening at the back

@cristinac92

3 жыл бұрын

There's a small black tab in the center of the truck door (inside the car). If you pop it out it will have a metal cord attached to it. You have to a good pull. Once that tab is placed back or is not being actively pulled, the door locks again.

How much did you pay for battery?

@dahelmer

3 жыл бұрын

They are about $200.

It is very dangerous to leave off the vent tube. I can't believe you didn't mention it.

@ECPP

3 жыл бұрын

Thanks and yes

Don’t you have to register the battery or recoding it

@ECPP

3 жыл бұрын

yes

Start the engine to see ANOTHER trouble code I see--I just watched the other video and saw the tach. acting very erratic. Probably not a cheap battery as most diesel vehicles have a very high CCA. I put a new 800 CCA battery in my Jeep from Walmart and it was 100.00 to replace the Optima red top that barely lasted 4 years, I feel those are overrated and only better for certain applications I used to live in NY where it's 0 degrees and now in NC it was 10 last night, but what about 'global warming'???

Give me your pizza....lool

You failed to REPROGRAM the system, very bad!!!!!!!!!!!!

Don’t you have to program it all

@ECPP

4 жыл бұрын

Yes

@Sunny-me1xq

4 жыл бұрын

Cause I just bought a used 2014 X6 M now I am fucking regret it German cars are garbages not reliable like Japanese car

@syazwanmnqr1985

3 жыл бұрын

any video show how to program the ecu sir?

Couldn't just make it straight forward could they...🤦🙄

u have to register the battery or it will be damaged. u have no idea what ur talking about.

@ECPP

3 жыл бұрын

Thanks Brian

@thoufequemcmt

3 жыл бұрын

I don’t have any problem other than that I can’t select max edrive; it says max max edrive is not available

what fucking battery is

@ECPP

Жыл бұрын

Thanks