Need to swop DME's tomorrow to narrow down a plausible fault. Thanks for this!

@etwasbauen6615

2 жыл бұрын

Any time!

One of the most informative as for what it is ,for a bmw...

I'm glad I found this video, currently 2001 330ci w/ steptronic - is at the shop for sluggish acceleration and rough idle. the shop has replaced all vac leaks, replaced the much needed CCV oil separator system, intake manifold gasket, oil filter housing gasket, new fuel pump and fuel filter, new Maf sensor and disa valve. this that being said my disa valve keeps keeps failing!! like alot, the mechanic says they install a new one and it was working fine all the power is back etc, etc, then i went to test drive it today and nope as soon as i left the lot i felt the sluggish acceleration and rough idle all come back again. The shop tech that was on the test drive with me was dumbfounded and confused when he saw i was having issues driving the car, then we switched seats and he drove it and he noticed instantly it was back to is (sluggish no power and rough idle again). anyway, so my question is - is a Continuous failure of the DISA valve ECU related or and electrical short in the harness???? just trying to figure out what other possibilities there could be why my disa is not functioning correctly. Ive had this car for oever 4 yrs no driving issues whatsoever and ever since my fuel pump blew and was replaced the disa valve has never worked the same again - Any input from you would be greatly appreciated. P.S I'm almost just ready to sell the car "as is" but i fear if i sell it cheap to someone and they figure it out to be some simple fix then they just got a awesome car for pennies on the dollar. I still REALLY LOVE the E46, is soo amazing to drive when is all working as it should. but as of now its a nightmare.

@anishmahadeo5073

Жыл бұрын

Maybe the fuel pump damaged the injectors? I have a diesel e46 with the wrong emissions spec injectors which meant that the ECU could not fuel compensate and it crawled, it took like 45 seconds to 60 mph

@DiscoFang

7 ай бұрын

Just read similar problem on a forum for yr 2000 328i. Turned out misfire was loose ignition coil harness connector at the DME. I’ll be checking mine.

thank you it is verry usefull if u buy a car and u dont want previous owner wanna steel it or other previous owners... just go to scrapyard annonimous car and make sure the car from the scrapyard had at least 2 keys great video..👍👍👍👍

@etwasbauen6615

2 жыл бұрын

Thank you. Yes its a good swap to do.

Awesome vid I need to do a ecu/dme swap to narrow down crank no start issue once done could I just swap the new keys chip into the old keys metal peace to avoid changing the locks and ignition barrel ect if that makes sense thanks

Nice video, would a 325 ecu fit in a 323ci without having to reprogram?

Thank you from France, great video

@etwasbauen6615

2 жыл бұрын

Thanks for watching!

@ismaS.1

2 жыл бұрын

DME: Activation électrovanne de dégazage réservoir (code EUIll:P0443) DME: Activation électroventila- teur DME: Signal débitmètre massique à film chaud (code EUIll:P0101) DME: Signal température air 79 aspiré (code FUllI:P0110)

I am having an issue with my DME rom 2830 error. I was going to send in the DME to get it repaired. a full replacement might be an option. great video BTW.

@etwasbauen6615

3 жыл бұрын

Hi, Yes some times swapping everything over can be cheaper and faster. Thanks for watching!

if you buy a car you dont want previous owner or owners do stupit things when they have a copy of your car..👍👍👍really great video if i wanna go to the scrapyard and fine one car with at least 2 keys i will take all of it out...

@etwasbauen6615

2 жыл бұрын

Thanks

Hey so do I need to replace the key cylinder or can I just replace the ecm and the plastic box and program a key to the box and use the old cutting ?

Hey man. My 2001 325i died like pre-quarantine. Took it to the shop in 2022 and it sat there for like 8 months or more. They told me it needed a new ECU/ECM, called the dealership and they said it would need a special order and it would be around $2k to get made, a rebuild is pretty expensive too. I see that there’s a few of them on eBay for under $100. Idk anything about this stuff but do you think I could fix it myself? Do I really need to swap everything or can I just swap the ECU?

Thanks Etwas.

What about the VO if you change the whole set?

Can you please recommend where can I buy the whole set of ecu; ews to swap my bmw

Wont the original vin# be changed when you plug into obd for state inspections

Hi, if you unplug and plug back in your ecm do you beed to reprogram anything?

So if I replace the dme I have to do everything else or is it only when I’m replacing the ews

i got a p0600 code on my bmw 325i 2001 any recommendation?

Hi, thanks for sharing, awesome content. Quick question, is this going to erase the history of the car, like codes, milage, warning lights on the dashboard, etc? Thank you!

@etwasbauen6615

Жыл бұрын

Hi, it just changes the main engine computer it doesnt change the odometer or any other lights like airbag or abs. Thanks

@Opiti72

Жыл бұрын

@@etwasbauen6615 Ohh okk, thanks, VIN number neither? Thanks again man, great job!

Awesome video, do you have parts available?

@etwasbauen6615

2 жыл бұрын

Hi ,yes we do the link to our ebay store and facebook are in the description !

or you could get another key & cut it program it to new ews...thats what did on my e46 320d.

Is there a part number for the black box with 5 fuses? or may be there are different part numbers for all 5 fuses? One more question - on my BMW e46 M43 (87 KW / 118 HP), Petrol Manual (there were produced before 09/2001), apart from these 5 fuses, there is also a fuel pump relay sitting behind the glove compartment (part number 61368373700), is that correct? So theoretically either of them might have gone bust, right? Many thanks!

@etwasbauen6615

2 жыл бұрын

There should be.

Hey I'm looking at swapping everything out on my 06 525xi... I have a a chance to buy another 06 525xi about 7 hours away. Trying to avoid that, do you sell that setup?

@etwasbauen6615

2 жыл бұрын

Hi i dont have any in stock at the moment. Thanks

I was wondering if you knew if an ecu from a 2002 330i would work in a 2002 325i ? 🙏 Thank you in advance.

@etwasbauen6615

2 жыл бұрын

I believe they are different. Thanks

Hey would the DME from an e46 318i be compatible for a 316i,both within the year of 2002-2004,same n42 engine and DME number?

@rikymalone

11 күн бұрын

Hello, I know I’m here year after but I want to know if you could code the n42 dme or swap with other Ecu thanks

I am having issue with my DME of 320i. no pulse for cylinder 6. expert says it's my DME so what do u recommend, go for repair or complete kit? I m from Pakistan. either way I have to outsource

@etwasbauen6615

2 жыл бұрын

Hi, it maybe easier to by the kit second hand for cheaper

@ismailzadran5834

2 жыл бұрын

Sir I need DME7 515 182 complete kit can you help me

On an automatic, would you also have to replace the transmission control?

@etwasbauen6615

2 жыл бұрын

No you dont have too.

@adamreiser7610

2 жыл бұрын

Thanks!

Good morning. I have a start sequence problem on my BMW E46. On stage 1, all the lights on the dashboard light up as if we were in stage 2. And in stage 2 it remains the same. Then in step 3 it starts normally. So, I would like to fix the problem from step 1 and step 2. If you have any idea. Thanks in advance.

@joseSanchez-dn1et

2 жыл бұрын

I am having the same problem is it okay to still drive it like that or is there a solution

@etwasbauen6615

2 жыл бұрын

Unfortunately im not sure. Thanks

Can I install 330 System in my 328 bmw 2001..will it works or not

@etwasbauen6615

2 жыл бұрын

Im not 100% sure. Sorry

My dme got wet if I buy a new one will I have to get it programmed to get the car running?

@etwasbauen6615

2 жыл бұрын

Yes you will. Thanks

Hello sir my ecu DME is not working I want to change I need to change complete kit or just DME ?

@etwasbauen6615

2 жыл бұрын

You can change the DME but it would need to be programmed. If you replace all the matching components you dont have to program.

@MSH3L-E60

Жыл бұрын

How many parts should match and what I hope to list here. Thank you.

Does the vin in the computer have to match the vin of the car to work

@etwasbauen6615

2 жыл бұрын

it doesnt. all the components just need to match.

@MSH3L-E60

Жыл бұрын

Can I buy identical components with a different number than in the car now? The car works but we want to apply all the parts as well to have 2 keys

If i only want to change the ECU will the car start or do I need to change everything?

@etwasbauen6615

2 жыл бұрын

you would have to change the ews, ignition key, and DME they all communicate together. Thanks

@MSH3L-E60

Жыл бұрын

all the equipment is changed with the same numbers, the engine and the key will work remotely or will I need a programming expert? And how do I know the correct controller numbers? Is it a number vin 318i 2002bmw E46 N42

If I swapped out all this will I need to reprogram anything?

@etwasbauen6615

2 жыл бұрын

No you wont. Thanks

@tylerbevan3185

2 жыл бұрын

@@etwasbauen6615 thanks do yous by anychance have the full setup for a 318i

Can I just replace a DME with a second hand one and just work?

@etwasbauen6615

2 жыл бұрын

No it would have to be programmed unless you have the ews , key etc.

@ismailzadran5834

2 жыл бұрын

Sir I have problems in DME what to do I find DME in same number if I buy same sériel is it’s work or no ?

Where do I buy the full kit?

@etwasbauen6615

2 жыл бұрын

I would try ebay. thanks

Cost for 2003 325i auto I'm interested

@etwasbauen6615

2 жыл бұрын

We are out of them at the moment. Thanks

hello do you use ISTA ?

@etwasbauen6615

Жыл бұрын

Hi i dont. Thanks

This car will never run again