Where was you years ago when we needed to see these sort of repairs could be done

@yorkshirecarrestoration

10 ай бұрын

I was doing this same job but not on youtube :)

when you can't see the repairs- it's perfect : )

@yorkshirecarrestoration

Жыл бұрын

thank you Ian haha

Watching these videos you begin to appreciate why Hight quality restorations are neither cheap or done quickly, really inspiring work as ever Steve

@yorkshirecarrestoration

Жыл бұрын

Thank you Colin. :) 👍

The choice of music for this one really worked, it didn't overpower or distract from the actual content.

@yorkshirecarrestoration

Жыл бұрын

thank you , we are trying really hard to get a good balance :)

@PieroIvanMontemaggioreschreibe

Жыл бұрын

Absolutely.

Beautiful workmanship. It’s every much as art as a craft. Thank you for sharing a drop of pleasure that is evident. I find it calming. Cheers😊 Mike

The 6 series I think is one the nicest coupes ever made I had a 1985 628 csi from Germany with euro specs at around 100 mph it's starts to wake up!

@yorkshirecarrestoration

Жыл бұрын

They definitely are a fantastic car :)

Magic as ever Steph!

@yorkshirecarrestoration

Жыл бұрын

thank you Eddie, as always your support is much appreciated :)

Good to see your subscription numbers creeping up, it's well deserved.

@yorkshirecarrestoration

Жыл бұрын

thank you Stu , we do work hard at the vids, takes me two whole days to film and produce just one 20 min vid :)

Having finished my apprenticeship over 25 years ago in welding and fabrication. My old boss mr g Craig. A wizard with a torch . Said stay away from cars . Years later I did a mk2 fiesta. Not easy chasing holes . I’m still welding today and loving my job . new to the channel came over from mat Armstrong yesterday. Look forward to seeing what you do with his car . Amazing work by the looks of it . Total respect ✊

@yorkshirecarrestoration

Жыл бұрын

thank you it is a job with a lot of satisfaction :)

I love ❤️ this channel I just made a homemade metal bender by watching your channel, I wish 🤞 I was there to watch and help you guys I know that it's hard work but very rewarding to see what you can accomplish

@yorkshirecarrestoration

Жыл бұрын

Thank you David. It's the support like yours that keeps us doing what we do :)

Love watching the rust destruction, keep the vids coming guys. Great work 👍

@yorkshirecarrestoration

Жыл бұрын

thank you we will :)

You make the whole process seem very easy, that’s what experience does I guess.

My God that's a lot of work a joy to watch...

@yorkshirecarrestoration

Жыл бұрын

not as much work as some of out other projects :)

Mesmerizing watching these skills, I'm quite capable doing the same stuff, it only takes me double (or maybe triple) the time it takes Steve to do this. Awesome!

@yorkshirecarrestoration

Жыл бұрын

thank you the support is appreciated :)

thanl You Steve, after watching You working i started to repair my car. I started with small inside parts, so the result will no be visible because the result is not showable. I have only vise and hammer. By chance, the car has very few problems outside. Next step will be on engine and for that part, i am more confident. If ever You don't know where to go for the next holidays, You will be warmly welcome in Philippines with free accomodation and food, just for some shaping and welding lessons ;-)

@yorkshirecarrestoration

Жыл бұрын

haha thank you Leo , we may one day take a trip to the Philippines as my partner who is Vietnamese wants to visit there :) we wont take you up on your offer but thank you anyway Leo :)

YCR Metal working heroes! Enjoyed the softer musical accompaniment btw 👍

@yorkshirecarrestoration

Жыл бұрын

Glad you enjoyed it! :)

bloody amazing stevo

@yorkshirecarrestoration

Жыл бұрын

Haha thank you Karen :)

As allways great work!!

@yorkshirecarrestoration

Жыл бұрын

Thank you :)

A pleasure to watch a master of his trade at work.keep it up😊

@yorkshirecarrestoration

Жыл бұрын

thank you Andrew :)

Nice work as usual 👍

@yorkshirecarrestoration

Жыл бұрын

thank you :)

good job. nice patch panels :)

@yorkshirecarrestoration

Жыл бұрын

Thanks!

Piękny klasyk i bardzo dobra robota. Pozdrawiam z Polski.

@yorkshirecarrestoration

Жыл бұрын

Thank you and hello Poland :)

True art

Nice rebuild 👍

@yorkshirecarrestoration

Жыл бұрын

Thank you :)

Good job big boy😀

@yorkshirecarrestoration

Жыл бұрын

haha thank you :)

Verry good work greating's from Gemany

@yorkshirecarrestoration

Жыл бұрын

Thank you :) hi Germany :)

Great work Steve, enjoy these restos so much 👍 I use one of those spade shaped bonnet struts too 🤣

@yorkshirecarrestoration

Жыл бұрын

haha i couldn't find anything else Nick :)

Apply the zinc spray only where you weld. Other paints don't adhere well to it- they peel off. Try some epoxy paints on bare metal.

@yorkshirecarrestoration

Жыл бұрын

Don't worry everything gets rubbed down before anything is applied over the top. It's on placed on to stop any corrosion while we are attending to other repairs.

Quality, have been subscribed from near the beginning enjoy videos, I have been in the trade for near 30 years, from 18 , I know the time & effort it takes to do these jobs , you have great knowledge and skills, Best wishes

@yorkshirecarrestoration

Жыл бұрын

Thank you Mikey and thank you for your continued support :) hopfully we will keep you watching in the future :)

Trabalho excelente. Parabéns!

@yorkshirecarrestoration

Жыл бұрын

Thank you :)

I'd forgotten about this BMW you started on, what with the 911 & the Disaster Datsun! Good work Steve!

@yorkshirecarrestoration

Жыл бұрын

thank you, there is more to come on all of them :)

good video👍

@yorkshirecarrestoration

Жыл бұрын

Thank you Paul :)

Very informative to watch the process. Thank you once again.

@yorkshirecarrestoration

Жыл бұрын

its our pleasure George :)

master craftsman @ ur trade🥳🥳🥳👌

@yorkshirecarrestoration

Жыл бұрын

Thank you :) 👍

As usual a pleasure watching you work.

@yorkshirecarrestoration

Жыл бұрын

thank you Chris :)

The Master. Applying his art

@yorkshirecarrestoration

Жыл бұрын

thank you Graeme :)

this is a joy to watch and keeping another lovely car on the road great work !

@yorkshirecarrestoration

Жыл бұрын

thank you Derek :)

My e24 fix.

@yorkshirecarrestoration

Жыл бұрын

haha More to come soon :)

Again great work guys .Yorkshire car restoration .My favorite Channel on youtube . Greetings from Holland.

@yorkshirecarrestoration

Жыл бұрын

Thank you Robert, nice to see its well received in Holland :) 👍

😂 АССАЛАМУ1АЛЕЙКУМ как же эта работа завараживает, прямо так и хочется взять за молоток тут же начать работу жестянщика. Профессионализм виден сразу по работе. СОЗДАТЕЛИ КАПСУЛ ВРЕМЕНИ. ☝️😆👍

@yorkshirecarrestoration

Жыл бұрын

Haha thank you, your support is appreciated :)

Высший пилотаж спасибо

Nice work from you guys as usual😎👍

@yorkshirecarrestoration

Жыл бұрын

thank you :) we appreciate your support :)

👏👏👏

@yorkshirecarrestoration

Жыл бұрын

😁👍

As always, great work! Steve, the what seems to be 1/2" rubber mat you are using on the bench, is it simply canvas laced insertion rubber, or is it a piece of offcut, wire wound conveyor belting?

@yorkshirecarrestoration

Жыл бұрын

i think its conveyor belting Brian :)

seriously good work there, and well explained.

@yorkshirecarrestoration

Жыл бұрын

thank you :)

What kind of welding setup are you using? :) this is a piece of art

@yorkshirecarrestoration

Жыл бұрын

just a snapon 160 welder and co2 as gas :)

Steve I’ve watched a lot of your videos could you answer a question when your welding sometimes you use an air nozzle and sometimes not why is that 👍👍

Supah!

@yorkshirecarrestoration

Жыл бұрын

👍

Hello again Steve, thanks once again for an inspiring vid. I have a question for you, the white db6 that you have in the workshop, is that a customer car? I have only once seen a white db6, it was in about 1986 and I was driving a truck back then. I was driving out of Holywell in north Wales and it was on a driveway and looked as though it had not moved in quite a long time, I couldn`t stop but I determined that I was going to knock about it next time I was passing, alas it was a long time between trips there and the car disappeared. It wouldn`t be the same car would it? Oh chances missed eh? Grab them with both hands and don`t procrastinate is the moral of this story. Thanks again Steve. Kind regards, Paul.

@yorkshirecarrestoration

Жыл бұрын

I don't know tbh. It is a customers car so that can pose the question :)

👍👍👍🦈

@yorkshirecarrestoration

Жыл бұрын

👍👍

same as Dave below

Good afternoon from Germany

@yorkshirecarrestoration

Жыл бұрын

Hi, glad we are reaching out to you guys in Germany :)

@mercedes_and_more

Жыл бұрын

@@yorkshirecarrestoration you are and i have got a friend of mine subscribing to you aswell - he has exactly the same rust issues with his 6!

@yorkshirecarrestoration

Жыл бұрын

@@mercedes_and_more thank you we do appreciate your telling people about us :)

@mercedes_and_more

Жыл бұрын

@@yorkshirecarrestoration 👌

@mercedes_and_more

Жыл бұрын

@@yorkshirecarrestoration We all rely on spreading the word to grow our KZread channels.

Was the front Tyre well damage from an impact?

@yorkshirecarrestoration

Жыл бұрын

Nope no damage just rusts with age :)

Just curios what kind of spray paint on it and can welding on it

@yorkshirecarrestoration

Жыл бұрын

Weld through primer :)

Mesmerising work fantastic 👌

@yorkshirecarrestoration

Жыл бұрын

thank you :)

When can we see start on the orange Opel i see in back ground?

@yorkshirecarrestoration

Жыл бұрын

next one in line :) we have already stated it and filmed some underneath :)

1000X👌

@yorkshirecarrestoration

Жыл бұрын

:)

3:50 есть диск коралл - он металл не ест. Кузов и так старый а он его наждачкой срезает

@yorkshirecarrestoration

Жыл бұрын

Thank you for the advice

what is your price for restoration, are we all the same as what we do in the video for $50?😃👍

Pit belting, gotta have a million and one uses!

@yorkshirecarrestoration

Жыл бұрын

It dose we have always used it but I don't think Iv ever seen anyone else use it as we do haha

Dunno about ye but I find bimmers far easier to repair than most other makes - there's a more logical layering of the panels & the shapes are usually pretty simple to replicate. Did the footwell on a ford today - 7 layers of steel to repair.. 7.. just to get back out to the eighth - the outer sill & wing layers. "PITA" about sums it up by comparison.

@yorkshirecarrestoration

Жыл бұрын

I find the 80's cars seem to be easier for me but iv never analised why James :)

@jamesward5721

Жыл бұрын

@@yorkshirecarrestoration I do a lot of earlier yokes- Mk1 Escorts, early oddball Fords, real early Volvos - all curves, swoops & do yer head in shapes - rebuild a Mk1 Escort bonnet, making the repair sections from scratch - your head would melt at the shapes you have to recreate.. I just find that in comparison, the likes of these bimmers are far less brain-melting & a lot more relaxing in comparison. Dunno - just my 2c. Then again, I fixed the crashed-in bumper on a 2007 Vitara suv today & it was like a holiday, lol. No rust - just some plastic to sort??? Mint!

@jamesward5721

Жыл бұрын

@@tomthompson7400 Mk4 Escort - drivers/passengers footwells going out to the sills - between the floor, the chassis reinforcement under the floor & all the layers of A pillar, sills, sill reinforcement blah blah, they are a trial... I am now fully refreshed on what a trial as I was at another today, cutting my way in. Lucky me, I get to weld my way back out tomorrow..

@jamesward5721

Жыл бұрын

I have to number the layers just so I remember which goes in what order, otherwise it's too easy to goof.

When the spade appeared I thought you'd decided that the best thing for it was a Christian burial.

@yorkshirecarrestoration

Жыл бұрын

Think that spade is reserved for the Datsun :D

How many cutting wheels do you get through in a week ? 😂

@yorkshirecarrestoration

Жыл бұрын

seems like hundreds :o

Christ, that music is annoying. Nothing wrong with the sound of hammering, welding or grinding.

@yorkshirecarrestoration

Жыл бұрын

Cant please everyone :)

@berwhaletheavenger

Жыл бұрын

@@yorkshirecarrestoration Do the next one without the musak and see.

вдохновляюще

No pongan publicidad de Saenz dejen ver los vídeos.

Wow that's looking really good Steve ,that's last piece rounding the corner off 👍look like it just part of the original bodywork,nice job 👍

@yorkshirecarrestoration

Жыл бұрын

thank you Richard :)