Thank you for the most simple and clear guidance of BMW coding on the whole KZread. It's really great job.

@BimDoc

Жыл бұрын

Enjoy! ☺️

You are a wizard.. I've watch many videos about coding the one thing, where they go through the menues quickly, but I never truely understood what they did or what the things actually do. Replicating the one thing is easy, but for the other things I wanted to code, there where no specific guides. I couldn't really grasp what the difference between the FA changes and specific changes in the code where, or what the loaded FA file actually means. With this video you helped me out a ton in understanding all that.

@BimDoc

Жыл бұрын

Make sure to share that useful information on different forums so other people also can find it )))

Mannn, this tutorial is way too good. Vladimir breaks the stages down to the simplest bites any person to understand.

@BimDoc

11 ай бұрын

Glad you think so!

Владимир, благодарю за твои труды! Желаю тебе всех благ!!!

Very interesting video,well done bimmer doc ,we wait for part 3!

@BimDoc

Жыл бұрын

Part 3 will be even deeper ))

Excellent videos, really clear instructions and by far the best guides available on the net.

@BimDoc

Жыл бұрын

Thank you ☺️

After watching this video, coding a BMW to enhance its maximum potential and after retrofits looks simple and easy ! 😎. Thank you for showing a detailed approach for coding. Please do more videos like this in the future🤞

@BimDoc

Жыл бұрын

Sure 👌

The sharing is very useful, thank you very much, I am always waiting for the next parts

@BimDoc

Жыл бұрын

You welcome ))

Thank you so much for putting these videos together!

@BimDoc

Жыл бұрын

Enjoy )))

Thank you , you are the best !!!! Waiting part 3 !!!

@BimDoc

Жыл бұрын

Working on that )

Thing is not to rush and figure everything out. Very useful video

The best esys tutorial I have seen yet, thanks Vladimir

@BimDoc

20 күн бұрын

You're very welcome!

Как всегда, очень полезные знания. Спасибо тебе за них, Володя, дай бог тебе здоровья!

@BimDoc

Жыл бұрын

А пожалуйста

@HOOLACOSTE

Жыл бұрын

Устал читать…. Не досмотрел до конца

Awesome video! Thank you for the detailed explanation!

@BimDoc

Жыл бұрын

You welcome )

Thank you for this real-life tutorial .

@BimDoc

Жыл бұрын

You welcome 🤗

Thank you! So much interesting and cognitively as usual

@BimDoc

Жыл бұрын

Brain trainig is more important than it might look like 😉

This guy is brilliant and honestly knows what he’s talking about 👍👍

@BimDoc

5 ай бұрын

I have worked with BMWs couple times 😅

QUE BUENOS VIDEOS!!!!! HACE UN MES QUE ESTOY BUSCANDO INFORMACION DE ESTO.. LO MEJOR DE LO MEJOR.. GRACIAS!!! :)

@BimDoc

Жыл бұрын

You welcome

You should win an oscar or something like that. Its super easy to understand (I am Brazilian) and very intuitive. I like how you didnt ignore some processes. Got one more Brazilian subscriber.

@BimDoc

Ай бұрын

Thanks! 😃

I was watching my boss allways coding stuff it looks so hard to do but after I saw your videos is really easy. Ty so much

@BimDoc

Ай бұрын

Great to hear!

Super Très bon tuto avec beaucoup d'explications et une très bonne pédagogie. Je passe du codage de ma e39 au codage de ma nouvelle G30 et cela va beaucoup m'aider Félicitation et un grand merci

@BimDoc

Жыл бұрын

Enjoy new knowledge ))

Thank's for your job,always the best 👍.

@BimDoc

Жыл бұрын

You welcome 🤗

Great Work! Thanks a lot.

Как всегда, отличный видос! 🌞

This will help me add 644 to my F11. Thank you so much !

@BimDoc

Жыл бұрын

You're welcome!

Спасибо Владимир! Развеяли мои сомнения! Буду осваивать сам 👍😎

@BimDoc

Жыл бұрын

Конечно. Кто не рискует, тот не пьет шампанского))

@konstantinsabaev

Жыл бұрын

@@BimDoc 🤝🥰

I wish i found this video earlier. I wanted to code enhanced BT in my bmw f30 but the head unit lost all Bluetooth connection and now I can no longer code it to the default settings… but you live and you learn. That was the first and last time I mess with E-Sys.

Очень доходчиво, благодарю!

@BimDoc

Жыл бұрын

Пожалуйста )

Было очень полезно! Спасибо.

It will be a good idea to do a video on retrofitting nbt evo on a 2015 car showing how to change the time criteria and VO

thank you very much im really greatfull for you

@BimDoc

Жыл бұрын

You're welcome!

Спасибо за очень полезный контент

@BimDoc

Жыл бұрын

А пожалуйста

why have you only got '151' comments, you should have at least,,,2 BILLION,,everyone should put a thumbs up and recommend your channel, Thank you for posting this AWESOME video,,the best on BMW's on the entire You Tube,,, please post more, Bless 🙂😇👍

@BimDoc

Жыл бұрын

I’m glad you liked it ))) Let’s hope there will be billion comments 😅😅 But topic if too narrow and very specific.

@sollykhan2385

Жыл бұрын

@@BimDoc Thanks for your kind response, Vladimir, let us ALL promote your channel, and soon it becomes bigger than; Google,,Facebook,Twitter, etc,,,🙂😎👍

nice jop >>now i understand what fa means

@BimDoc

Жыл бұрын

It’s very important to understand what is FA!

very good video

@BimDoc

9 ай бұрын

Enjoy))

thank you

Following your videos, I did my first FA coding today I retrofitted High FZD to add alarm To be honest it didn’t allow me to do coding first as the code option was grayed out but your videos gave me courage to look around; I don’t know exactly how, but I managed to code it😅 Thanks for your efforts Would you please make a video about coding donor parts

@BimDoc

Жыл бұрын

Nice work!

Привет, классно объясняешь

thank u for what u giving r amazing i subscribed to ur channel and following all ur videos plzz can u make a video how to uses Esys when u change a damaged control module replacing it with a used1 with another chassis number thank u

VERY GOOOOOOD ///PLEASE CAN MAKE A VIDEO HOW IMPORT FULL FA/VO TO CAR FOR EXAMPLE IF SOME ONE DELETED FA/VO

@BimDoc

Жыл бұрын

Might be an idea for a new video. Why not )

Hi Vladimir, thank you for your videos, they are very helpful! i have a question... I have retrofitted on my Bmw F10 harman/kardon sound system from basic one and i need to code it myself, how can i find what code do i need to put in VA and i suppose that i have to go and code in the HU (Head Unit) in the past i have retrofitted big screen CIC as my car from factory had small screen CIC. Someane else coded CIC when retrofitted. When i will try to code my Harman Kardon am i gonna lose any coding that was needed for my CIC? Regards.

Respect

Very useful video

@BimDoc

4 ай бұрын

Glad you think so!

tnx u dear

Владимир, спасибо, я с тобой английский выучу 🔥

@BimDoc

Жыл бұрын

Знания никогда не бывают лишними

Thank you, it is very clear now! Finally I found one very useful tutorial on E-sys! Technical Questions: in my case, I would like to replace the LED Headlights with used Laser Headlights. Will I be looking to CODE the FA (Removing LED SA and adding Laser SA) and then code FLER/FLEL modules only? Or is there anything else I must pay attention? Thank you

@BimDoc

Жыл бұрын

Code BDC/FEM as well Be aware that laser lights were not present on all preLCI BMWs. So they will be not compatible wo extra adapters etc.

Watched all three parts and i must say your videos are really helpful! I have a question though regarding ATM Retrofit over old TCB in f20 with zeitkriterium 1611. Do i need to code the ATM or just connect it and it will work?

@BimDoc

Жыл бұрын

Code ATM and Evo with same FA.

Спасибо!

дякую

Thanks alot for your videos! Could you please drop us video about checking real mailage on car before buying?

@BimDoc

Жыл бұрын

There is such a video in the channel. But in Russian.

Thanks for these videos, really useful and well explained. I have a question. I have a mini F54 with classic led (5a2). I’m going to replace them by matrix led. So i need to change the VO to delete 5a2 and replace by the new option code, maybe also change the date for one corresponding for the new headlights. After that, i know that i have to read ÉCU and code the modules FLE. Another modules to code ? Thanks for your help !

@BimDoc

9 ай бұрын

You are thinking in a right direction! Don’t forget to check wiring (might be different on 5A2 and 552) Also chassis positioning sensors (front and rear axle)

Very nice video, I would love a video how to code and program a second hand replacement module in a car, Would that be the same? Just code the FA to the specific module? Or requires extra steps like vin number

@BimDoc

Жыл бұрын

That will be definitely one of the esys for dummies parts.

Great video thank you! Do you know if there is a way to save a car profile for backup? I know that previous owner retrofitted a few things, can I save his VO setting now and upload it if something goes wrong to reset ti?

@BimDoc

Жыл бұрын

You can save CAFD from every ecu to code it back if needed. (Will not work any more after SW update)

Hi Vladimir! Thank you so much for your videos. I am just getting started and have used your videos to learn. I have of course also subbed ;-) I have a question I hope you can help me with. I have swapped my steering wheel in my F01 to one that has paddles. I have changed to active in SZL module, but it still doesn't work. Also I don't have 205 in VO? I have read I should change this to 2TB. Lastly, I don't have FEM-body? What should I do from here? Thank you very much!

@BimDoc

Жыл бұрын

You will have separate SZL ecu in esys to code. And yes adding 2TB will add shifters

Thanks for all the input! Just had to replace an old EKPM. Is there any guide you could share on the easiest way to program it? Have both E-Sys and ISTA+ but a complete dummy with both. Only got to the point when both of them read the car specs.

@BimDoc

Жыл бұрын

See video about SZL replacement. Procedure is the same

Hi, thank you for the great work, I learned so much. Though, one point is still not clear. How haven't you lost connection to NBT EVO(which is 609) when you VO coded the car for adaptive lights? You mentioned everything would turn to the factory settings when VO coded.

@BimDoc

Жыл бұрын

You are absolutely right, but FEM ECU does not care what headunit is installed. Because all headunits are at the same diagnostic address x63 and FEM just receives information from HU. That’s why I was still able to see Evo 😉

Thanks again Vladimir for a great video. I have an nbt next and an Entry Nav on my 2014 and 2015 cars. So if I change the time criteria to 0317 and VO from 606 to 609, I will have nbt evo and then I can buy car play from you. Which ecu's will have to be coded

@BimDoc

11 ай бұрын

You are absolutely right Code: Kombi NBT ATM ZBE Should be enough for beginning

@savvasyiangou1514

11 ай бұрын

Thanks for the very quick reply. Do I also have to replace the hardware, i.e. the head unit module and screen

Thank you so much for this video. A question: why didn't you write FA and FP to VCM before moving to Coding? Is it a necessary step? I'm a bit confused. Thanks in advance!

@BimDoc

3 ай бұрын

Because not always you need to do it. It will affect future codings (because modified FA will be saved into the vehicle). So it’s up to you to write it or not. Some FA changes are NOT ALLOWED to be permanently saved into the vehicle. You will create a huge mess there 😉

Awesome possibilities. Have you tried Bimmercode and Protools? Do these tools only allow smaller coding tasks or the "expert" mode allows to modify all lines as in esys?

@BimDoc

Жыл бұрын

Their tools allow to do almost all same things in expert mode. But no phone codings apps can make all the same as engineer level software (esys)

@tarassu

Жыл бұрын

@@BimDoc Is it possible/reasonable, that some lines are missing? I'm trying to choose a simple software solution for BMW i3, to remove traffic jam assist TJA "motorway only" limitation, but some forum users say that coding line is missing in BimmerCode (makes no sense to me as expert mode should just read all the lines with no filters). As far as I searched i-series vehicles have exceptionally bad cheat sheets. This is why I consider BimmerCode.

18:17 You explained that to upgrade the NBT_EVO you not only had to adjust the FA, but also the time criterion. In this case, does the FA with the changed time criterion also have to be written into the car, or only as usual code the affected ECUs ?

@BimDoc

10 ай бұрын

Do not write modified FA into vehicle Code only affected ECUs

Спасибо

@BimDoc

Жыл бұрын

А пожалуйста )

Dear Vladimir. Thank you for your video, it's really helpful. I have a question, if we code 2TB instead of 205, how do we recognise which modules should be coded?

@BimDoc

Жыл бұрын

Just google for coding guides. They will tell which ECUs needed to me coded (EGS, ICM, KOMBI) at least. Maybe DSC as well.

@sokolvpv

Жыл бұрын

@@BimDoc thank you for your fast reply. I'll try Google it one more time.

20:50 You explained that when FA is changed it is not recommended to code all ECUs, just single ECUs. I agree with you! But how do you know which ECUs are affected by a change in the FA in order to code only these?

@BimDoc

10 ай бұрын

That information will be covered in launcher comparison video in the future 😉 But it’s very good question ))

This is great, taking some quality notes so far! My question is, if I inject 5A2 FA into a vehicle with 1114 Zeitkriterium. How would it know to operate it? considering 5A2 LED Headlights were manufactured post 2018.

@BimDoc

10 ай бұрын

If smth is not compatible the esys will not allow you to calculate FP and tell you about that incomparability And you will be not able to continue

@DanielSarvari

9 ай бұрын

@@BimDoc thanks for this! I attempted to do this, but after hitting CODE on the BDC Body, it does the coding, no errors, but when I check again nothing was coded! what could be the reason?

Just perfect, now i understand better. How can you upgrade the firmware of the retrofitted nbt-evo? That would be very interesting (fullscreen carplay ☺️)

@BimDoc

Жыл бұрын

Might be one if future topics

@Harpoon6666

Жыл бұрын

@@BimDoc awesome, looking forward to this 👍

Hey, so I can make easily from xdrive to sdrive and reverse just by changing SALAPA element by knowing right code for sdrive and xdrive? And of-course need to know what ecu need to be coded (press code button on each ECU)? I think it should be DME DSC and maybe EGS?

@BimDoc

Жыл бұрын

Converting form AWD to RWD is not so straight forward

@BimmerDoc video is very great! I want to code on G12 Heated Steering wheel. I will add to VO option 248 and then as I know i need press code BDC_Body + HU. My other settings will not go away if i do this code? because car was USA and already has EU codings.

@BimDoc

7 ай бұрын

If you perform VO coding then all previous codings will be overwritten! So do not approach the way you have described. You need to add steering wheel codings manually via FDL coding. See my esys manual part 3 to get an idea how it should be done correctly

Nice Video! I would like to retrofit option 5DV-RCP. My G30 (2020) has following options available: 322-Comfort Access 2TE-Steptronic transmission with shift paddles 5DN-Parking Assistant Plus 3DS-Remote Display Key Is it required to install additional Hardware, or only coding? PS: My Remote Display Key has no additional Button for RCP on the right side. Can it be used for RCP or do I need to purchase another variant?

@BimDoc

10 ай бұрын

HW is definitely needed Coding will not be enough!

@jadrandjurovic4005

10 ай бұрын

@@BimDoc do you know which HW is missing in that case?

Hello thanks bro for these amazing video but I didn’t understand why the professional navigation is 606 not 609 you replace it how did you code it then

@BimDoc

Жыл бұрын

Pro navi is 609 Business is 606 On retrofitted ECUs car modified FA not always can be saved into the vehicle

Ačiū!

@BimDoc

5 ай бұрын

Thank you for your support!

Спасибо Владимир. БМВ хитрая машинка.

Thank you for the awesome videos! This has helped immensely. I have a question about writing the FA: In what situations is it absolutely necessary to write an updated FA to the car? I am curious because I initially found "Beginners Coding Guide.pdf" which has very similar steps, but it differs in that the guide asks you to load the FA xml and then Write FA FP under VCM. What is the functional difference here? My assumption is that your method leaves the SA Options changed only in the FA file on the computer, whereas the other option permanently changes the FA options on the car itself. In either case you're still updating the individual modules using one of the FAs. is that correct? I'm assuming the latter is a bad idea in case you do not code the car correctly.

@BimDoc

9 ай бұрын

If that option you are changing can be present from factory in your vehicle, then you can write modified FA into your BMW. But if you are making somekind retrofit for example that was not present on your vehicle from the factory. (Installing NBT on a vehicle that was produced with CiC) In that case do not write modified FA into the vehicle.

Where can I check if feature like NBT EVO was available when car was produced. So you know to leave old code or put new code? in VO

@BimDoc

Жыл бұрын

Check my telegram bot. It will tell you if your headunit is supported or not t.me/BimmerDocBot

So if you change the timeCriteria to a date later than your vehicle was manufactured, does that mean you get backwards compatibility with all previous modules? Is this safe to do in all cases?

@BimDoc

Жыл бұрын

Changing time criteria is allowed only for retrofits (advanced level). Do not write modified time criteria into the vehicle. It will not do any good!

The best video i have seen explaining e-sys, but can you clarify the following. My head unit failed so i installed an identical one sourced from ebay. I now get error code B7F882 'Control Unit is coded for vehicle'. Its identical an part number to the prior unit, so the VO should be the same. What do i do to code the new head unit to the vehicle if it is identical to the prior one?

@BimDoc

Жыл бұрын

Yes you need to VO code it. In addition FSC codes are needed for navigation activation

@christurner884

Жыл бұрын

@@BimDoc my vo does not change since I am installing a replacement head unit. When I come to code the replacement head unit ecu the code button is not bold so cannot be selected. Does the replacement head unit require to be flashed, I assume you had to do this when you upgraded yours

А не планируешь сделать видео с программой BimmerCode?

@BimDoc

Жыл бұрын

Не пользуюсь ей.

Super Thanks! It's impressive, the best instructive content. I want to code out VDC(EDC) of F2x series. Hope it works in the same manner, maybe by deleting "2VF" from somewhere(s). Anyone, please give the instruction!!

@BimDoc

Жыл бұрын

It is possible. Key is in manipulations with SVT.

@matomax3242

Жыл бұрын

@@BimDoc Hi, Thank you for your comment. You showed the method to restore the change by reverting the data manually in FA. Although it's good to restore a few changes, it may be difficult to restore many changes at one time. it's . So, could you tell the steps to restore the original settings from the backup file, just in case for the safety?

@matomax3242

Жыл бұрын

@@BimDoc Hi, please allow me one more question. I guess there are cases that more than one ECU nodes have to be coded even if only one item was changed/deleted/added in VO. If my guess is true, how can you tell which other ECU node(s) should run "Code"?

Лучше вас кто смог бы объяснить и рассказать никого нет!

@BimDoc

Жыл бұрын

А пожалуйста

Hi, when coding with VO do you need full PSDZDATA or is lite enough ?

@BimDoc

7 ай бұрын

Lite will be enough

this is the best informative video I ever found about E-Sys! thank you. I have a problem and hope you can help please. I retrofitted cruise control into my F20 and added the 544, also added 2TB and 6NS to enable bluetooth. the mistake I did was coded the entire ECU not just the ones required, and now I'm stuck with Drive train mulfanction and checkengine light, car is working fine thoos and the cruise control works fine. scanned the car via obd and it says: Error code: 1F2601: DME, coding missing and 2 transmission codes: CF2101 and CF1531 is there away to correct this? really apreciate any advice, thanks :)

@BimDoc

Жыл бұрын

Yes if is solvable. Recode all with stock FA DDE needs cafd tonne inserted to fix your problem

@mustaqkhalifa9700

Жыл бұрын

@Ramy Enam I am looking to do the same thing to my F20, do you have an email I could email you on or a number as I can’t seem to find the download links for Esys please could you help?

@ramyemam_

Жыл бұрын

@@mustaqkhalifa9700 I don’t remember exactly where I found it, but your best chances are either look for installation guides on KZread or bimmer forums

Part 3 please

@BimDoc

Жыл бұрын

Working on it ))

Hello! In your video person didn’t change FA from 606 to 609 then how they managed to make nbtevo work properly? And one more question, if I would like to activate sport transmition I changed FA (to 2TB) and after it I have to coding what ECU? I don’t have steering shifters.

@BimDoc

Жыл бұрын

For retrofits you need to modify FA and code ECUs with that. But you don’t save it into your car. For sport tranny code EGS ICM KOMBI

@user-mp4oq7pn9k

Жыл бұрын

@@BimDoc I watched your video with retrofit 6WB, you saved FA with 6WB into your car. Why with 606 to 609 it doesn’t necessary?

If the production date is changed for a retrofit, and another module has changed during that changed period of time, is it worth changing the production date to the original one after coding? For example, if the FEM module has been changed to a newer version at the factory over a period of time and you still have the old module in the car. You update the FEM module software, so the wrong software goes inside the module?

@BimDoc

Жыл бұрын

Car production date istep shipment should always remain the same in the car. Changing it is allowed only temporarily for retrofits. I suggest not to mess with I-step shipment

@kari-mattiloukiainen6825

Жыл бұрын

@@BimDoc I mean the Zeitkriterium change, not the istep shipment level. So is it possible to update the module's software incorrectly if I have changed the Zeitkriterium number to a newer one? Your videos are great 👍.

Владимир, не очень понял один момент. например я решил переделать G30 японку под европу. сменил регион, кодирнул SALAPA нужными опциями все ок. затем решил поправить работу фар Adaptive LED чтобы светили по европейски. я поменял признак с JA92 на JA91 и закодировал обе фары. все работает. но вопрос по каким либо дальнейшим кодировкам. если у машины был изменен признак на JA91 то теперь кодируя какой либо блок в машине который не совместим с этим признаком может случится факап?)))

@BimDoc

6 ай бұрын

Если играть с комплектацией и кодировать разные блоки то результат может быть очень непредсказуемый ))

Hello! Thanks for very well guide. I got retrofitted SA609 (NBT EVO) from 606, but I've still got 606 in my options left by last person, who did retrofit. Could you explain me why its not 609, and how it could harm my vehicle? I've also seen your 606 -> 609 retrofit, but you changed 606 to 609 and didnt change it back on video. Thanks for help!

@BimDoc

Жыл бұрын

You can change it to 609 and save. If the same HU was found at you vehicle (type and date)

@pcode5846

Жыл бұрын

@@BimDoc Thanks for answer. I'am curious why you havent done it on your retrofit. You did say, that it may harm vehicle. Greetings!

Владимир, здравствуйте! Собираюсь купить BMW g20 из Кореи, но там нет русского языка. Как его закодировать правильно? - просто добавить в комплектацию S6UD и S8LR? кодировать сразу все блоки, или выборочно? Или там другой алгоритм?

@BimDoc

Жыл бұрын

Делается. Но немного по другому

Hi Vladimir, is your website resource available yet.?

@BimDoc

4 ай бұрын

It was, but most likely will not be back online any soon

Hello, i changed a headlight and need to code the new modules to my 1 series f20, how do i do this?

@BimDoc

Жыл бұрын

Import CAFD and code ecu

hi, how do you go about it if you have no coding on new 8hp tcm.

@BimDoc

4 ай бұрын

Insert CAFD and code ECU

How to load saved FA back to car (here You showed only how to save it)? Does all FDL coding data comes back with saved FA (FDL coding were made before FA saving)? I coded ecu to factory using this video guide. Hope You will understand what I wanted to ask :D

@BimDoc

11 ай бұрын

Writing FA back is done via VCM tab VO coding rewrites all FDL coding.

Hello, I have seen your videos on KZread. And wanted to add something to my vehicle order. However, I don't want to code the whole car but only the control units that are affected/dependent. How can I find out? I have only found instructions on how to find the dependency for flashing but not when changing the vehicle order.

@BimDoc

3 ай бұрын

It’s a good question. I might even make a full video about that 😉 Short answer is use Esys Ultra to see which ECUs are needed to be coded

красава

Can u may share your Cheat Sheet? I was not able to find a accurate one for my G30. I am very unsure after editing the FA because i never know how many and witch ECU I should code to get things work.

@BimDoc

Жыл бұрын

All my codings will be available at my website (when it will be ready)

@valici1985

Жыл бұрын

When is your website is ready? I want to VO code the 2TB into my G30. Greetings from Germany

I VO coded 2TB, should I write it to the car in VCM or not? What is the best approach?

@BimDoc

4 ай бұрын

I always prefer to write it into VCM

Hi Vladimir, could you direct us to the right source where we could purchase the ESys Plus and Launcher Pro (the right email of the Token Master) Thank you.

@BimDoc

Жыл бұрын

Www.google.com And over there you will find original website 😉

@eduardkleichnet3930

Жыл бұрын

@@BimDoc I have tried many times and its a lot of misleading information i.e. there many Token masters.... is there a website or email that you mentioned in one of your videos? it would be very helpfull please I know you must be busy but stil.... 🙏🙏🙏

Приветствую, не подскажешь какой программой можно обнулить счетчик короткого замыкания в REM блоке, tool32 как не старался не делает, ISTA ? Да и спасибо за познавательные видео.

@BimDoc

Жыл бұрын

Все тем же tool32

@davitrobakidze5839

Жыл бұрын

@@BimDoc тогда не как frm обнуляется, потому что параметра проста нету.

@BimDoc

Жыл бұрын

Пишите в личку. Сделаю

@davitrobakidze5839

Жыл бұрын

@@BimDoc внимательней прошел по tool32 и нашел (помог твой видос по tool32) сбросил без проблем :) Спасибо.

How do we make sure which ECU should be coded with the new FA? I mean the depencies for dedicated ECUs they are involved into the "new" option.

@BimDoc

Ай бұрын

Different launchers have built in extra options to show that.

@user-bx7ms8fj2r

Ай бұрын

@@BimDoc Also EsysUltra? The ESysUltra supplier do not provide the overview on additional features or am I wrong? And thanks for you recommendation regarding Backup feature in ESysUltra, it did spare a lot of issues and time for me)

Do you know where the code for vehicle display in dashboard and head unit is? I have shadowline trime and beige interior but it doesn't show up on any of the displays anymore. just a regular chrome trim and default car

@BimDoc

Жыл бұрын

Those pictures could be exchanged with custom ones, but not via regular coding. Some more tricks are needed.

@dipensk8

Жыл бұрын

@@BimDoc do you have any videos or guides on how to go about doing this? I’ve learned so much from your videos so far and I regret not starting my coding with esys. Something in bimmercode basic mode changed my cars avatar

Hello I am going to retrofit my F20 2014 to nbt evo but i don't know how to VO as i am a little bit confused my car year last production date is 2015 so what to write at typekey and production date time in order to read 609 can you clarify

Hi, I recently flashed my F30 330i from ID4 to ID6. However, after the flashing, the steering become a lot heavier and the shifting of gears feel different as well, makes me dizzy while driving. Does you know why did this happen, did I miss anything during the flashing.