BMW 1 Series LS V8 Swap by Brintech - Part 1
Автокөліктер мен көлік құралдары
Our 120i hatch shop car has been a reliable and fun little 4 cyl 6 speed manual combo. But, in this 2 part build series, we take it off the road, strip it out and install a 6L LS V8 engine, demonstrating our swap kit and how you can build one yourself.
Please subscribe to get notified when the next video goes up.
Check out our website below for securing your swap kit components.
www.brintechcustoms.com.au/e8...
Please email or call to discuss this particular build and for all details on how you can do this swap so that you can get a road registered, engineered, custom built sports car.
Пікірлер: 87
Where is part 2?
I love the fact that you did that to a hatch back. Most people would go for the coupe
@BrintechCustoms
Ай бұрын
I think the hatch is an un-tapped gem. Front engine rear wheel drive practical and nimble. The V8 makes it quite special
I'm very glad I came across this video. I have a 120i with relatively low mileage with a nice set of BMW X5 rims on and sent it in to sort out oil leaks and the estimate was a third of the price that a normal LS swop would cost, so I was hoping it was possible to do it to this car. I'd rather spend money this way!
@lucajack007
Жыл бұрын
How big are your rims? 🙏
@CalmKenan
Жыл бұрын
@@lucajack007 they were 18 inch x5 mags. sitting with 19's on my F30 now though
Love your guys work man, fixing the only issue bmws have😂.. Aussies leading the way baby👌🏼
Excited for this one
Awesome guys.
Here we go.... Another great project on the way.
Looks Awesome
Great video , don’t worry about the schmuts on the intake that’s nothing send it! I love how much room There still is in there what a sleeper
@BrintechCustoms
3 жыл бұрын
You'd love this car. You should come and review the finished product
@FirstLast-tx3yj
3 жыл бұрын
@@BrintechCustoms how do u control the dct gearbox after u swap in an ls??
@BrintechCustoms
3 жыл бұрын
@@FirstLast-tx3yj We have a 3rd party controller we will be using for this.
@FirstLast-tx3yj
3 жыл бұрын
@@BrintechCustoms max ecu or htg??
@BrintechCustoms
3 жыл бұрын
@@FirstLast-tx3yj Neither
Damn that balancer looks nastyyyy 😆
awesome!
And that was 3 years ago!
Love this! Is there are part 2??
I so want to see more of this build… my dream car is a 1M clone with a LS
@Slaktrax
Жыл бұрын
LS9 please!
hey where are the other videos?
Muy buen video me sirvió de mucho les mando un gran saludo desde saltillo coahuila mexico. Y me gustaría saber si me pueden resolver la duda respecto alos headers de que auto son para saber si los puedo adaptar al mio de antemano gracias
Question for anyone…what I never understand about LS swaps for late model cars is when you unplug the original engine wiring what do you do with those wires? Do you pull them out at the BMW computer or leave them and hide them? If pulling out how do you know what to take out. Anyways that’s my biggest source of uncertainty when considering a project like this
Awesome stuff! My 335i needs this haha
@BrintechCustoms
3 жыл бұрын
We have a complete swap kit for your 335i ;)
@lindabenton1436
3 жыл бұрын
Please donate the N54 so that I can shove it into my E87 118i 😂
@focusondetailing3855
3 жыл бұрын
@@BrintechCustoms I'm already saving for it 😂
@focusondetailing3855
3 жыл бұрын
@@lindabenton1436 not so sure about a donation 😅😅 gotta recoup a little for the LS build haha
@lindabenton1436
3 жыл бұрын
@@focusondetailing3855 okay then I'll also save up to buy it then. I bet @Brintech Customs would assist with the project
Talk about wiring, Will you be able to retain AC? Will it have annoying abs/traction control warning lights ? Check engine lights? What ECU will it use?
Me interesa saber qué motor y qué transmisión es para mi proyecto 120i 🙏
coming back to this video again since im not sure how else i should keep in contact. anyways i was wondering is the 128 or 135 radiator better for this swap? correct me if im wrong but arent there some minor differences
Part 2?
Where’s part2
Cuando la segunda parte ??
my friends i have a few questions i have a bmw 1 serie 120i petrol year 2006 e87 model 150hp i only replaced the engine two months ago. there is now 2 tons on the engine. just drive really nice. now the engine is built into it. only brand oil consumption. The mechanic told me that the wrong oil was used by my mechanic. and that now the valve spools and staples are replaced. First question is, I really like my car to drive. The only downside is that my valve stem needs to be replaced. because it consumes a lot of oil. need to top up oil every week. and also consumes quite a lot of gasoline, he is not the most economical, that may have to do with oil consumption. that it is not economical. I have seen your video. it motivated me a lot. because my 1 series is a really nice car. he has all options. only it doesn't have a turbo. so I can't get chipped. should be another reason. to make my car faster. Or do I have to change my engine as well? just like you in the video. after I've watched your video, I'm now thinking of putting a BMW 535i or 540i engine in it, is that possible what would something like that cost.? I know there are a lot of things that need to change about the car. but if you are a fan you should talk about it I think. I would like advice on what is the best thing to do. Also what is the proce for building 535i 540i motor in e87 2006 benzine whats the price mine frend.
damn, what did yall clean the block and trans with?
Is the subframe for the left hand drive and right hand drive same?
Give us part 2!!
nice and clean, as you talked at the end of the video, how to retain the traction control? i am collecting some info for.my 120i
@Slaktrax
Жыл бұрын
The TC is part of the ETC.
haven't seen a follow-up video on this
Does the rear diff get upgraded too?
Too bad we can't get the 1 series hatch in the states.
Surprised it looks like there’s a ton of room!
just out of curiosity did you ever finish this build
Is there a part 2??
Hello guys.. beautiful work you do .. I’m interested in your swap kit for the e39 bmw… I have a 2000 model and I’m in the USA.. (Florida).. is it possible for me to order a ls swap kit from you… pricing and info would be greatly appreciated… names Vance
You sell Ls swap kits ?
Where did you get the wiring harness from looking to do a la swap in a 128i
@BrintechCustoms
6 ай бұрын
We make them and can supply you one. email us cars@brintech.com.au
What happened to the rest of the series?
Did you guys have to beef up the rear end?
@BrintechCustoms
2 ай бұрын
Yes we have a custom rear end for it using a Nissan R200 diff and billet axles
What’s the cost of this if I supply the engine ?
Where's part 2?
How much is coast of swap?
How much does this cost?
Can this kit be fitted to 135i with a DCT?
@nowweretorquin8691
2 ай бұрын
It will fit any E8x or E9x chassis - it is deigned to mount an LS engine and T56 or TR6060 Tremec GM box.
@BB-tb9ih
2 ай бұрын
@nowweretorquin8691 So thats a no then lol
@BrintechCustoms
2 ай бұрын
@@BB-tb9ih Sorry your question was ambiguous. Ill clarify what you probably meant: Does the transmission cross member we supply work for a DCT? Obviously not, a GM and DCT box have different mounting points. Can it work? Yes. With a different mount, we also have DCT adapter plates for LS engine.
@BB-tb9ih
2 ай бұрын
@@BrintechCustoms Thank you sir, good to know it can be done :)
Great video. However, there's no need for that music I'd rather hear the power tools & shop noise.
How much for the swap kit ?
@BrintechCustoms
3 жыл бұрын
It starts from $4250. Send us an email for more info. cars@brintech.com.au
@ridgemills
Жыл бұрын
@@BrintechCustoms does it fit the 116i as well?
@BrintechCustoms
Жыл бұрын
@@ridgemills yes. Any E8x or E9x chassis
Why not N54/N55
@Slaktrax
Жыл бұрын
I don't think you are familiar with the LS V8's, a 6-litre version will make more torque at 1000rpm than any highly strung N54 or 55 and they keep going with just normal (and cheap) regular maintenance.
@iasoto
4 ай бұрын
@@Slaktrax I'm totally new on this but I want to learn. So, for my project do you recommend pick the LS instead of a N55? My car is a 125i coupe.
What happened????
@BrintechCustoms
Ай бұрын
We finished the car. Did not have time to produce a video of it yet sorry
@andydufresne3635
Ай бұрын
@@BrintechCustomslol
@BrintechCustoms
Ай бұрын
@@andydufresne3635if you laugh loud enough it might attract enough views to fund the next video
@andydufresne3635
Ай бұрын
@@BrintechCustoms I was just messing. I'm curious was it a good build?
@BrintechCustoms
Ай бұрын
@@andydufresne3635 we will hopefully get it out of the shed soon and get some video of it in action on the road. Its a very rewarding build and well worth doing.
How do i contact you guys via email