Check out my website for tons of DISCOUNT CODES, power station reviews, my 12v fridge guide, and solar panels featured on the channel! jasonoid.com/

@user-lc3kp9hy5n

Жыл бұрын

Wanting to order the EB70S, I already own the Bestek 300W Inverter I tried it with my laptop while driving it never blew the fuse...but my suv manual says 180w cigarette lighter socket. Will the Bluetti surely blow my fuse?

@UncleJoeHikes

Жыл бұрын

I know this is an older video but have you attempted to put 25V+ into the AC-Adapter input? I would very much like to do DC solar input and DC battery input simultaneously as I keep this in my Jeep with a solar panel and currently use a 300W inverter. I'd like to eliminate that inverter.

Thanks for the tip. I find the DC output from my vehicle charges my eb70s super slow. Time to learn more about electrical systems. Thanks for the video.

love all your videos, buying an Iceco after watching your other vids. thanks for all the content.

Could you do normal solar 12v and do solar with the step up 12v to 24v plugged into the 8mm side or would that damage it? I'm really curious to know. Great content and videos so much in depth knowledge compared to other channels

Good video❗️ I got a Jackery 1000 and 2 Solar panels for Father’s Day and I am just now testing it out on my 2M ham radio.

@Jasonoid

2 жыл бұрын

That a super sweet setup! Those 1000 units are pretty big and powerful!

Great info and completed in a professional manner

@Jasonoid

2 жыл бұрын

Thanks Tom, I have lots of other videos on my channel, I think you'll enjoy those videos too!

Followed your suggestion and got the step up. The Bluetti charges pretty fast in my car with that. Around 188 watts. Without the step up, it's around 85 watts. Thanks for the info.

@Jasonoid

2 жыл бұрын

Oh yeah, makes such a difference! :)

@williemarroquin2965

Жыл бұрын

Is that with plugging into the 12v charger that's in your car? I'm trying to do something similar and wanting to avoid wiring directly to the battery. Thank you!

Thank you for such a detailed review. Subbed.

@Jasonoid

2 жыл бұрын

Thanks! I have lots of other videos about power stations and solar panels. You might also find them helpful!

@withexpectancy5818

2 жыл бұрын

@@Jasonoid Yes definitely. I’ve subscribed so I will be checking out more things in your channel.😄

Love the video Learned a lot thank you for your help

So let's make this easy, I watch the previous video on the 12 to 24 volt converter.Bought it from Amazon. Hard wired it to my H2. Ran wires to the back and put a 24v rated cigarette plug there. Now I can hook it up to my EB70 using the supplied cable! Charges at 183 watts max!!!

@philgray1023

2 жыл бұрын

Pleased to hear that. My converter arrived today.

Very useful info, thanks

Just saw this old video of yours. Great great tips. Wish the old Jackery 500 would take more charge. Now I basically use them to power camp lights.

@Jasonoid

3 ай бұрын

Classic video here 👍😎

Thanks for putting this together. I discovered an unexpected behavior with my EB55 right charging input labeled 25-28V/10A. I figured you might be curious about this, too. Naturally, this input works just fine when I use the included 200W AC/DC adapter. However, when I try to use another power supply, a Victron Orion-Tr Smart DC-DC Charger, it will not charge. I am an electrical engineer, so naturally I made sure the polarity is correct with a multimeter (positive tip) prior to connecting. Also, the Victron has adjustable output voltage, so I tried everything from 25 to 28 volts, and I confirmed the output with a multimeter prior to connecting to the EB55. In addition, I also have Bluetti AC50S. As you know it has a similar 8mm input on the back that asks for 14-40V. When I plug my Victron into it, it charges just fine! I’m confused! Any thoughts on this? Thanks in advance.

@Roland-Lewis

2 жыл бұрын

By the way, the reason one would want to do this is this--12V solar panels output

@Jasonoid

2 жыл бұрын

@@Roland-Lewis Easiest way around that issue would be to have an inverter installed that can handle a 200-300 watt load. Then you could run the AC wall charger off the inverter AND the DC inverter both at the same time while the engine is running. Wire the inverter directly from the battery using like 6awg wire and it should be big enough to handle both the inverter and the DC charging at the same time. That direct wire connection to the battery would be useful for other applications in the future. I haven't worked with that Victron unit so not sure exactly why it's not working. The only thing that came to my mind could be that the victron charger must need some sort of feedback voltage to start putting out power? Similar to a laptop power supply, it wont just put out power but needs to verify something before it starts working.

@Roland-Lewis

2 жыл бұрын

@@Jasonoid Thanks for your prompt response. I get what you're saying that the 300W inverter is an option, but that is the function of the Orion. And I can't get myself to go DC to AC, just to go back to DC again. Yeah, it's so weird--the Orion shows voltage with just a multimeter connected, and as mentioned, it will charge the AC50S just fine. AND I DIDN'T MENTION THIS YET--the AC50S power supply will charge the EB55 just fine! Well, if you happen to have a DC power supply laying around that can output 25-28V, maybe you'll be curious to see if it will charge your EB55 from the 8mm input.

@Jasonoid

2 жыл бұрын

@@Roland-Lewis I was able to test charging my EB55 via the 8mm jack, it works fine with this adjustable power supply between 25 volts and 28 volts: www.banggood.com/TOPSHAK-K3010D-4-Digits-LED-Display-110V-or-220V-30V-10A-Adjustable-DC-Power-Supply-Switching-Regulated-Power-Supply-p-1419678.html?cur_warehouse=USA&ID=47757&rmmds=search

@Roland-Lewis

2 жыл бұрын

@@Jasonoid Thank you very much sir! I'm starting to think there might be something wrong with mine. I have a friend who has a similar power supply to yours, so I will borrow and test mine. Thank you again.

subscribed! Thanks for the great video and all the other in depth reviews you made! TLDR: 1. can a Bluetti EB55 actually charge at 224W on solar port alone (28V*8A)? or is limited to 200W? 2. how can you get the most out of 3 Bluetti SP120 solar pannels? the story: --------------------------------------------------------------------------- I have an EB55 and one SP120W solar panel, but I would like to add some solar charging power. I want to have about 100W charge on cloudy days and also to charge at the max rated input when sunny (28V * 8A = 224W). I'm thinking to buy another 2 solar panels, so to have 3 Bluetti SP120 (that in medium-good conditions can provide 75W/panel) that I can connect either: - in series (so ~50-60V and =8amps - in parallel (so ~16-20V and >14 amps - actual numbers depending on the clouds) and then use a converter to step the voltage up to 28V and >=8amps so here are my 3 questions: 1. can a Bluetti EB55 actually charge at 224W on solar port alone (28V*8A)? or is limited to 200W? I don't have a variable power supply to test this. 2. do you have a better (maybe cheaper) solution to achieve this? The converters I found are priced at about USD 200. series: www.tme.com/us/en-us/details/chb300w-48s28/dc-dc-converters/cincon/ parallel: www.tme.com/us/en-us/details/chb300w-24s28/dc-dc-converters/cincon/ 3. which one of the above scenarios do you recommend?

Awesome, just what I was looking for 👍👌 Silly question, if I use a 12-24 converter and want to run it from and Anderson off my cars charging system that nominally runs at up to 14.4 volts, will the output voltage remain at 24 volts or will it spike to 28.8 volts? Thanks

I ordered an EB70, if I want to use this converter in order to lower the recharging time on the EB70 do I wire the converter directly to the 12 truck battery? I think I'm going to build a small cabinet in the bed of the truck to place the EB70 in and I would mount this converter to the cabinet somewhere so I will always have it there for recharging. Does the converter work if connected to solar panel instead of the truck battery? Like if I had a switch to change from battery to solar or just had a splitter connection in the wires or does it always need to be from the truck battery? Once again, great video with VERY helpful information!!!

Thank you Jason, maybe I'll try this out if I get bold enough to start stripping wires. Might have to take a few swigs to steady my nerves though.

@Jasonoid

2 жыл бұрын

Hey, you can always find a friend or family member to help out. That's how I learned much of this stuff :)

Thank you! Does the DC-DC method also protect from over paneling? Also, if one's interest is battery longevity, should fast charging be reserved per need?

@Jasonoid

2 жыл бұрын

I'd only charge fast when needed. When using the DC to DC Charging method it won't harm the battery, it's basically the same thing as using the wall charger.

Great info. Seriously thank you. How long does it take to charge the smaller power bank by using your 24v wizardry you have shown us here Master?

@Jasonoid

2 жыл бұрын

That's the Bluetti EB55. It's around 537wh so to charge it up at 200watts takes around 2.5 hours.

@John-rj1ss

2 жыл бұрын

@@Jasonoid I've been thinking to get the battery to self charge.... out school light bulbs .. powering solar panels.. connected to 12v to 24v which in turn is connected to battery

I went ahead and ordered a cheap 1000 watt gas generator in case there`s ever a power outage and I need to charge my two EB70s and my smaller power stations on cloudy days to keep my small freezer and fridge going. I also ordered one of the tiny Frigidare air conditioners with manual controls like HOBOTECH used with a similar gas generator. They use around 400 watts so maybe I can get it to run on solar by next Summer. I`ll be moving into a large camper trailer soon and all this stuff will make things a lot less complicated if another hurricane or Winter storm hits. We have frequent power outages here even without the storms. I`ve bought every cable, connector, adapter, meter, tester, and accessory possible and so far I have three 100 watt glass panels and one 190 watt plus nine folding solar panels between 10 and 100 watts to charge little power banks for fans and lights and for portability with my 300 watt power stations. It`s nice to not have to worry about electricity or losing all my food.

@Jasonoid

2 жыл бұрын

Sounds like an excellent plan! Both exciting and fun :) I love tinkering with this stuff in my spare time. Good luck with the move, I'm sure you'll be prepared enough with all the gear / experience you have my friend!

@azclaimjumper

2 жыл бұрын

I have the slightly larger, heavier, Honda EU2200i for the same purposes. However, I have the Engel 45QT (1.3 cu ft) Marine FREEZER instead of a small Frig. Be sure to use Ethanol FREE gas for your generator & drain the carb float bowl after each use. Gas sitting in the float bowl will quickly gum up.

@baneverything5580

2 жыл бұрын

@@azclaimjumper How do you get ethanol free gas when there`s only one small gas station nearby? I`m in a very rural area.

@azclaimjumper

2 жыл бұрын

@@baneverything5580 Granted, Ethanol Free gas is definitely hard to find in small rural areas. It's hard to find in parts of some large cities. Maverik gas stations have tanks/pumps & sell Ethanol Free gas along with diesel fuel & 3 grades of ethanol gas. Maverik gas stations is a chain of gas stations out here in the western part of U.S.A. Warm Regards from Reno, Nevada

@Jasonoid

2 жыл бұрын

Maverick is where I get my Ethanol free fuel too! Glad to have them located in my area.

Interesting. I may have to get one of those 12V-24V converters. Quick question though; is it a simple voltage doubler, or is the output regulated to 24V? I ask this question because if your "12V" source is actually as high as 14V, if you got 28V, you might exceed an input only rated up to 25V.

@Jasonoid

2 жыл бұрын

It puts out a regulated 24volts. The highest voltage I saw was 24.5 volts so all within safe tolerances for the EBseries :)

I am a new subscriber. Excellent video...I am consideing a Bluetti. I do not know what size I would need. I presently want to put my dual zone fridge/freezer that says rated power 60 watts. If I used it without solar how many hours would it run on the EB55 and the EB70S ? I think the EBG3A would be too small ( i think). There is an AC70, but I do not know what it is. Thank you

@Jasonoid

8 ай бұрын

I usually recommend a power station with at least 500wh of capacity in the battery to run a DC fridge. Both the EB55 AND EB70s are a bit dated right now so id recommend the newer models with many better features. The AC70 should be a good choice, I haven't tested that one yet though.

Awesome video. My car has a 100W AC220V plug in the back. From your video it would seem that would run the charger and hence charge the battery whilst driving. I intend on Plugging the charger into the 100W inverter, then plug my portable fridge into the EB55. Would this work? I assume it would take 5+ hrs to charge like this whilst driving?

@Jasonoid

2 жыл бұрын

That will work great! Nice plan to charge the EB55 and run the fridge at the same time.

I have the EB70 and plan on making a direct connection to my starter battery. Which is better to use, the inverter or the step up converter? I don't think you showed the charging wattage result using the inverter on the EB70? Are both methods approximately 190ish watts? I enjoy and appreciate all your videos, Jason ....thanks.

@Jasonoid

6 ай бұрын

The inverter would be useful for other applications so ide suggest that. The DC to DC converter can only be used to charge the power station.

Highly informative. However, do you have a recommendation for replacing the Bluetti AC to DC converter that does not have a fan? Thanks.

@Jasonoid

2 жыл бұрын

Any power supply that puts out 25v to 28v around 8 to 10 amps will work

Whoop there it is!

Great video and tips! I have the eb55 and ac50s and noticed that the ac50s came with an mc4 to 8mm cable that allows you to hook up solar to the ac input on the eb55. This means you can charge the eb55 dual solar up to 400watts in addition to dual ac if you get a second ac charger. It's too bad Bluetti doesn't sell all their cables as standalone acessories

@Jasonoid

2 жыл бұрын

Those are both great batteries! The AC input on the EB55 actually has a tighter range of voltage and will only accept 25-28 volts so it probably wouldn't work well with solar since panels usually put out 18-20v. I can't remember if I tested it or not.

@gsp_in_training

2 жыл бұрын

@@Jasonoid I tested the ac input with sp200 panel and it pulled the same amount of solar charge as the dc/PV input...150-170 watts late afternoon. I'll have to test it again to make sure that want a fluke

@staryoke

2 жыл бұрын

Except for the EB55 has a max charge rate of 400w. Your comment seems like youre saying 400w (solar (dual solar)) + 400w (AC (dual ac adapters)) will go into the EB55 (making it 800w charging input) and thats not true. It caps out at 400w. So you could put 1000w of solar or 1000w of AC and youll still only put 400w in. Bluetti does sell cable adapters for about $10 on their website.

@gsp_in_training

2 жыл бұрын

@@staryoke dual ac OR dual solar

@Jasonoid

2 жыл бұрын

The max input for this power station is 400 watts and it will only charge that fast with dual ac chargers plugged in. With a solar panel and ac adapter dual charging its about 350 watts. You cant have dual solar inputs because one of the ports only accepts 25v - 28v input, too high for solar. I made a video on that topic earlier last month, check it out on my channel.

Nice video. Have you tested the Bestek 300watt? I've seen a few videos showing it isn't actually pure sine wave so wondering?

@Jasonoid

2 жыл бұрын

They offer two models, the one in the video has been tested with an oscilloscope and is a pure sine wave and offers good RMS voltage. Great question!

@NatureZone101

2 жыл бұрын

@@Jasonoid Thanks :)

jason another very good video , did you find a way to over charge the BIBENE 500W (just to know when hey have them back in stock ), thanks

@Jasonoid

2 жыл бұрын

Guess what!? I'm just editing that Bibene tear down video right now, I was able to charge it up over 200 watts and it has the potential to charge at 307 watts max if you wanted. Video should be out soon on the channel. I gotta space these videos out a bit right? Too much to fast people won't watch it all :) :) :) So excited!

@shaizahavi

2 жыл бұрын

@@Jasonoid just waiting for it be back in stock , do you have any inside about that?

@Jasonoid

2 жыл бұрын

@@shaizahavi bibene said around Sept 15th.... But world supply issues are just crazy right now!

Once again another great video. Thanks! I have a dilemma. My truck bed has a 400watt 115v AC running off a cheap inverter that is not compatible for charging my Bluetti. I just need to keep my Bluetti topped off while driving and powering my iceco vl45. Is it possible to drop the dirty 115v power down to 12v for a trickle charge into my Bluetti? Or would it be best to just run dedicated 12v to my truck bed.

@Jasonoid

5 ай бұрын

I'd recommend running a dedicated cable from your truck battery to charge it. You could even use a DC to DC converter to get even faster charging like in this video: kzread.info/dash/bejne/e2tstNqjgru6npc.html

@cogreenthumb

5 ай бұрын

I appreciate the advice!

New Subscriber needing some advice Please! I just ordered a Vevor 12V, 53qt dual zone car fridge and a Acopower 100W 12V monocrystalline solar panel that will installed on top of our Suburban. That’s all the room on top cause of the roof cargo boxes. Using Bluetti EB55. Will this be enough solar for it keep up running that fridge?(nothing else). should I add a narrow flexible solar panel (say 50watt) on one my cargo boxes? Problem is I hear nothing but bad about those. Thank for any insight or ideas!

@Jasonoid

Жыл бұрын

Hey Stilllearning, it depends on the weather. A 100 watt panel is plenty enough if you have lots of sun. The EB55 should give you a good amount of runtime as well. Most of the time you just need to run your setup and see how it all plays together.

Great video - do you know what type of losses there are from using a 12V to 24V converter? I’m looking to use an AC200P as a back up battery to my EB70S by charging it with the DC output from the AC200P and this would speed up the process!

@Jasonoid

2 жыл бұрын

There is some heat build on the device so you are losing power in the process, hard to tell an actual number. So you need to chose between a slower charge rate thats probably more efficient or a faster charge rate.

@onejeef

2 жыл бұрын

@@Jasonoid Perfect summary of my dilemma, leaning towards faster DC charging in this scenario due to high AC200P internal power use

Nice class teacher.

@Jasonoid

2 жыл бұрын

Thanks haha. You got any other things you'd like to see demonstrated?

@noirpreppingfoodadventures3251

2 жыл бұрын

@@Jasonoid I'm sure something will come to mind soon. Thanks!

Can I use a Renogy "DCC50S 12V 50A DC-DC On-Board Battery Charger with MPPT" to charge an EB70s using the alternator and/or solar panel? Are there problems in that it would go through 2 MPPTs, one in the renogy B2B and one in the Bluetti EB70s? What kind of wiring hookup would you recommend? excellent video!

@Jasonoid

Жыл бұрын

The EB70 has its own built in charging system so if you plugged in another charger it wouldn't work well. The fastest DC to DC Charging option is to use 24v

@pmoasis2825

Жыл бұрын

Thank you so much for your responsiveness! Do you think it would charge at 12-13+Volts (renogy specs) @ 8Amps (bluetti limitation), or do you think the fact that there are 2 charge controllers in series have problems resulting in further charging diminishment/ Issues? do you think either piece of equipment would be damaged by setting the Bluetti up to charge through the Renogy?

@Jasonoid

Жыл бұрын

@@pmoasis2825 I just don't think the Bluetti charge controller will know what to do with the Renogy voltage. If you plug your Bluetti into your car 12v socket or direct battery connection it will charge at 110 watts. No need for the DC to DC charger in between. You can think of it already having a DC to DC charger inside already.

Great video thank you for this. Do you have a link To the power supply and the Volt meter?

@Jasonoid

2 жыл бұрын

Are you wanting the DC 24 step up converter or the 24volt wall power supply?

@johnperry5960

2 жыл бұрын

@@Jasonoid both if possible., and the Meter on the right that's sitting on the table at 2 minutes 40 seconds into the video

Can it charge 12v battery? Like extension of power to add another 100ah battery for example and use a solar pannel charging the 55 and the extension battery at the same time

Does the 12v to 24v 10A converter create alot of heat with extended charge times? I'm questioning because the 7.6A it pulls while charging is pretty close to the 10A limit. Wonder if it would be better/more reliable to get a similar 20A unit. I want reliability, but I'm guessing the power draw on the larger unit would be more.

@Jasonoid

2 жыл бұрын

If you are planning to use it all the time, I'd recommend going to a larger 20amp model, that way it will dissipate heat better.

do you have a video on how to set up the 12-24v converter in a car? step by step with the wiring and stuff?

@Jasonoid

2 жыл бұрын

I don't have a specific video, but since it pulls over 10 amps it will blow a 12v cig port fuse, you'd want to hardwire it in directly to your starter battery.

I’ve got an EB70S on order. Why do you think they released this, as it appears to only boost the ac output from 700-800 watts vs the EB70. Seems like a very minimal “upgrade”. What’s your take on this?

@Jasonoid

2 жыл бұрын

The normal EB70 seems to do 800watts just fine. I think it's a marketing thing. Maybe it has a software upgrade but I don't think anything is different in the hardware. It will be a great power station as well.

Hi Jason. I just purchased a Bluetti EB70s and I'm waiting for it to arrive. Question for you. I have a 2021 GMC canyon and I want to use the 12V cigarette lighter to charge the EB70s while traveling. I plan to use the EB70s to power a small fridge and other devices while i'm out camping. Could I use a 12v inverter between the cigarette lighter and the EB70s to help with rapid charging? Please let me know your thoughts

@Jasonoid

2 жыл бұрын

Most 12v sockets are rated at 120-180 watts max. If your 12v socket in your truck is rated for 250 watts max, it's safe to run an inverter and the 200 watt wall charger. If not, it will blow a fuse and lose power. That's why you'll most likely need a direct connection to your starter battery, it pulls lots of power.

@at4overlandadventures711

2 жыл бұрын

@@Jasonoid I appreciate your reply!!! I spoke with my friend who wired all my lights and he said the same thing. I think I’ll get a direct connection to the battery. Thx again!!!

Once again, well done. In addition to mounting it somewhere with a good air flow, I definitely agree that a 12v to 24v converter should have it's own dedicated wiring directly to the vehicle's battery. - In other words, do not depend on the vehicle's factory wiring to its OEM cigarette lighter port. -

@Jasonoid

2 жыл бұрын

Thanks for commenting Andrew! Pulling 16 amps is a lot of power. Most vehicle wiring wouldn't handle it so glad they have fuses built in. It works well off my 8 awg wire from my battery.

@skycam9085

2 жыл бұрын

sure! car outlets are generally fused with max. 10 amps anyway .. which is already too much for this weak connection - runs hot. makes no sense to try pulling 17 amps - no way.

@RyLReaSoN

2 жыл бұрын

How would I connect my converter to my battery and EB70? What types of cables would I need?

@andrewinaustintx

2 жыл бұрын

@@RyLReaSoN In lieu of the above mentioned converter - there is an available Yeti Goal Zero Regulated Lithium Car Charger cable that ups the charging voltage a bit to your battery pack. When Goal Zero cable is set to "Low" the Bluetti will show about an 85 watt input.

@Jasonoid

2 жыл бұрын

Can you clarify what equipment you are using? Converter is a little vague.

Great video! Can I plug an EB 70 into the rear AC output on my 4runner, and just charge while driving? With the fridge plugged in!

@Jasonoid

2 жыл бұрын

That should work just fine. It will keep the EB70 topped off until you turn off your engine, then your fridge will run off the EB70 capacity.

@oyster_3694

2 жыл бұрын

@@Jasonoid thank you! Just wasn't sure if it would be too much for my stock alternator to handle?

@Jasonoid

2 жыл бұрын

@@oyster_3694 Not at all, you are using the built in inverter so you'd hope Toyota planned for that to be used :)

Would it be possible to get the full 200W charging from solar panels if you rig something up with a DC/DC convertor?

@Jasonoid

Жыл бұрын

Yes, if you copy the voltage and amperage output of the wall charger.

I want to be able to charge the eb55 with a solar panel continuously and with the car alternator while driving without having to physically switch cables. What is the best method to do this? Thanks in advance.🙏

@Jasonoid

9 ай бұрын

Since there's only one charging port for DC input you'd have to swap the wiring manually OR install your own inline switch that takes power from two sources and allows you to go back and forth. Something like this would work for that: amzn.to/480K9bP Look at the images and you'll see the wiring in the back.

@ray32825

9 ай бұрын

@@Jasonoid Thanks for the prompt reply, I really appreciate your help. Surely there must be a way to use the 25-28Volt DC input to charge the unit while driving without having to use an inverter and the brick with its fan running continuously.

Should i have to worry about Backfeeding with this unit when using it in house???

I would be interesting to see how the 12/24 unit for charging can be connected and used on various Victron output systems.... solar. dc to dc... I'll be checkin on such.. I did hear that slower charging rates (at least for lithium ION) will help in battery longevity ... but PO4? Maybe rate has near no effect.

@Jasonoid

2 жыл бұрын

Charging both types of Lithium batteries slower will be better for long term health, I don't think it affects it that much though. I don't have any Victron equipment so I wouldn't be able to test that out.

Would it be an acceptable idea for use in a car camping situation to use a parallel XT60 cable to allow input through the MPPT port from the vehicle's 12 volt, as well as a solar panel mounted to the roof to continue charging while the vehicle is not running and stationary? I thought I might give this a try: "FLY RC 2pcs XT60 Parallel Battery Connector Cable Extension Y Splitter" (can't post link) The main reason is to avoid having to unplug the vehicle input through the XT60 port and plug in the solar panel input every time I stop driving. Partly for convenience, but I'm hoping I might also get a boost in amperage, but not over the allowable range.

@Jasonoid

Жыл бұрын

The charging port can't accept two different input voltages at the same time. You'd have to chose one or the other to charge the power station. If you connected both power sources at the same time to the Mppt, the solar panel would probably end up back feeding and charging your car battery directly to 18v and damaging it.

I’ve got an eb70s. Is there any issue with charging it on the road via solar and the 12v car charger at the same time? Thanks!

@Jasonoid

Жыл бұрын

The EB70 will only take one charging source at the same time. The two different charging voltages will not work well together if you tried to connect them.

I noticed the DC to DC converter has 16awg cable attached. No issues wiring from 12awg from the battery and dropping down to this 16awg? I didn't notice til I got the converter in the mail and I just ordered the 12awg wiring and fuse holder. I don't plan to use this outlet with anything else, so I suppose the 8A should still be fine. Also noticed the converter you linked wasn't the DayGreen you had. Haha.

@Jasonoid

2 жыл бұрын

There are many "brands" that are basically the same model on Amazon. It changes frequently so I had to update the link to a product that was in stock. The 16awg wires are such a 'short run' it shouldn't be an issue with voltage drop. I also noticed the same thing so good eye. When testing the charging the wires never got hot. I did notice they were a little warm but I think that's fine. Give her a good test to make sure it all works as expected. If you get an issue toss it back to amazon within the return window. You shouldn't have a problem though :)

@TG-qr4jr

2 жыл бұрын

@@Jasonoid awesome, thanks for confirming. 👍

If I have 400W 24V source, can I connect it in both connectors in parallel to charge EB55? Or it must be two separate 200W sources (galvanically isolated)

@Jasonoid

Жыл бұрын

On the EB55? You can only charge it from the charger on the 8mm connector and use the other XT60 port for your 24v source.

Hello, thanks for the video! Can you help me with the issue? I purchased an Anker 757 portable station and it does not want to be charged by a Power Drive 3000(watt) inverter. Inside Anker, the relay clicks when plugged in, but it doesn't charge. Although the fridge and microwave are working. (It all happens in a semi truck). Why? I'm not an electrician and don't really understand this.

@Jasonoid

2 жыл бұрын

I haven't tested any Anker products. I have heard they have great product support. I'd reach out to them directly about the issue.

1 question please. I have power Oak AC200P. His charger is 400w.so in my truck 24v I can install 500w inverter and when I drive I can charge it faster? Thank you in advance for your help

@Jasonoid

2 жыл бұрын

Yes, running your charger off an inverter will work. However you'll want to make sure your wires are the correct thickness to handle the power. You mentioned your truck is 24 volts? Is it a semi truck?

I know if I ask I probably shouldn't do it. On a scale 1-10 how bad of an idea is using that 12v-24v on a dedicated line I wire in my Jeep?

@Jasonoid

Жыл бұрын

As long as it's a fused connection with plenty of airflow, it should be fine!

@theorionnebula707

Жыл бұрын

@@Jasonoid Awesome, thanks! That was the plan!

Is it possible to some how add one of those digital battery monitors that show volts/percentage to the bluettis to give a more accurate battery percentage remaining ??

@Jasonoid

2 жыл бұрын

The EB series batteries are in 22v configuration so they are different than most standard voltages, probably would be hard to measure it.

After cutting the cigarette lighter plug off the specific Bestek inverter model in the video, and hard wiring it to my minivan battery 15 feet away behind the front seats using 8 gauge pure copper wire, in order to fast charge my Bluetti EB70 while driving: 1. how would you connect the 8 gauge wire to the inverter, and 2. what amp power breaker would you use on the 8 gauge wire near the minivan battery?

@Jasonoid

2 жыл бұрын

1. You can use a crimp connection with heat shrink, you can also solder it and heat shrink the connection. You could also use ring terminals with a bolt connecting them together. 2. 8AWG wire is rated for 40amps, so a 40 to 45 amp fuse should be fine.

@MichaelKarsh09

2 жыл бұрын

@@Jasonoid Thanks!

I wish the EB70 had the same charging inputs as the EB50. It’s nice to have the option to simultaneously change using a DC/solar and the A/C adapter. Did I miss something, the EB70 can only charge from a single at a time?

@Jasonoid

Жыл бұрын

Correct the EB70 has an older design and doesn't dual charge.

How does it charge from the house socket??

So the EB55 has an advantage over the EB70, dual charging. Do you know if the EB70 has a pure sine wave inverter?

@Jasonoid

2 жыл бұрын

They are both pure sine wave inverters, 700 watts each.

I've connected the Bestek 300W inverter directly to battery so I'm NOT using any vehicle wiring to provide power to an EB70 to recharge its battery when I'm driving down the road.

@Jasonoid

2 жыл бұрын

Excellent! It's a great way to charge up the EB70!

Have you tried using the 8mm barrel connector car charger from the eb70 in the eb55? Would be nice to see if you can charge with car battery/ alternator along with solar in the XT connector get 190w from the 24v converter into the 8mm barrel plug and 200 w solar into the XT...... 390w all while driving???

@Jasonoid

2 жыл бұрын

The EB55 8mm port will only take the wall charger input voltage so you'd have to have an inverter running in your car for the wall charger and then run the DC to DC step up converter to get 400watts. It's possible but youd probably have to run some large gauge wires direct from your vehicle starter battery to the inverter and DC connection for the step converter. Hope that makes sense!

@domwrinaldi

2 жыл бұрын

@@Jasonoid Thanks for the reply!! Yeah that checks out.... Wondering if the Bluetti DC charging enhancer could fill that role? Just trying to figure a way to charge with the alternator and solar simultaneously without using an inverter. I guess you cant have your cake and eat it too. love the videos.

@domwrinaldi

2 жыл бұрын

I see now the plug says 25v-28v so probably SOL... I did find a 12v to 28v step up DC- DC but probably not worth it. Might just have to settle for 24v 190w

@Jasonoid

2 жыл бұрын

@@domwrinaldi the 190watts is pretty decent, but having the inverter isn't too much extra if you ever wanted to jump at that project.

Do you have a link for the battery box? Will it hold a 50AH LIFePO battery? Thanks

@Jasonoid

10 ай бұрын

I did a video with a 50ah LFP battery here: kzread.info/dash/bejne/dG2Hj9BsosW8h9Y.html I wouldn't recommend the AC charging option I used by everything else worked well!

Can I charged bluetti in solar panel while I am using it as I noticed I have 200 watts bluetti solar panel and I am using 100 watts of power my solar panel generate 150 watts is this mean the 100 watts will be use and the remaining 50 watts will charge my EB70?

@Jasonoid

10 ай бұрын

Yes, if there's more power going in, the battery will be charged.

I’m curious, I have a Toyota Tacoma. Can’t I just plug in the AC outlet to the back of the truck and power my EB 700 that way? I believe while I’m driving it has around 450 Watts. That way I can bypass using the 12 V socket and blowing any fuses. Thanks

@Jasonoid

2 жыл бұрын

You're lucky to have the built in inverter, that's awesome! Yes, while driving you can charge up the EB70 with the stock 200 watt charger and keep it topped off while running your fridge or other accessories!

@benjones8977

2 жыл бұрын

@@Jasonoid Thanks. I have a Kimbo Camper I’m going to try and connect it to the shore power line and hook it up to the EB 700S. Figuring this is the best way, so it won’t cost me a fortune to run it from the battery or alternator. I’ll just run a cord from the inverter to the shore power. I was going to run it through the 12 V socket on the truck until I saw your video and realized I don’t want to blow a fuse or cause a fire! 🖖

@rommee

2 жыл бұрын

@@Jasonoid I just bought the EB70 direct from Bluetti and when charging from zero to full it's only taking 1.5 hours on AC and then showing full. This sounds great BUT it is depleating fast and seems like it has 300wh capacity (not even 600wh). I think there's a fault so I might have to get a replacement. Wondering if you had any tips or ideas what could be happening. Thanks 😊

Is there any reason I couldn’t use the 12 to 24v converter with 12v power running through a solar controller?

@Jasonoid

Жыл бұрын

I haven't tried that before. I don't think it would damage anything, so maybe it's worth a shot.

@dwb464

Жыл бұрын

@@Jasonoid I’m going to give it a try. I have the cascadia 4x4 system with a solar panel attached to a charge controller which trickle charges the starter battery and I has some 12v wires coming out of the charge controller that goes to a 12v socket in the bed that will charge the power bank. It has constant power with low voltage protection. How much power is coming to that socket varies if the truck is running or how much solar I’m getting so hopefully the boost converter won’t have any issues with that.

Is it okay to leave these plugged in to the wall in your basement to keep them fully charged in the event of a blackout?

@suprbst

Жыл бұрын

I'm not 100% sure, but I can tell you that the AC power supply appears to have an intelligent charging circuit, so the light goes red when it's charging, then green when it's done. I didn't see anything in the manual or online specifically saying green means it's trickle charging, but I might test it out and let you know if it switches back to actively charging while it's plugged in if the battery is drained slightly.

Interested in learning more about getting 24v from the car battery and your additional wiring for Anderson power pole.

@Jasonoid

2 жыл бұрын

You can see how to make Anderson Power Pole connections here in another video and the tools needed are in the video description: kzread.info/dash/bejne/lI58ypWnh7vam9o.html Once you get the tools/connections for APP, you run 12awg wire or larger directly from your battery into your vehicle cabin, then connect the 12v to 24v booster and you can get 24volts for your power station.

@kenmoist

2 жыл бұрын

@@Jasonoid sorry, newbee in all of this. if you run the 12 awg from the battery into the vehicle compartment to use the 12 to 24 converter to charge a EB 55 for example, it may take several hours to fully charge it. It would seem you’d drain the car battery for that amount of time and i wouldn’t want to run the vehicle at idle for a couple hours if I’m camped. Whats the best way to do it?

@Jasonoid

2 жыл бұрын

12awg wire would be good. Make sure to put a fuse on the positive wire close to the battery. You could charge the EB55 for maybe an hour without running the engine. After that amount of time you'd want to run the engine to keep the battery from dying. This mod would work really well to keep the power station full while driving on a road trip /running a 12v fridge.

@kenmoist

2 жыл бұрын

@@Jasonoid thanks. How big a fuse?

@kenmoist

2 жыл бұрын

@@Jasonoid i see you’ve referenced wiring your Toyota. Have you considered making a video on its capabilities?

Ever considered connecting a 200W solar panel to the input of the 12V to 24V DC-DC converter as a charging option?

@Jasonoid

Жыл бұрын

I've tried that, the converter doesn't like the voltage fluctuations. It didn't work very consistently. I'm sure if I used a better brand of converter it might actually work!

@CBL138

Жыл бұрын

@@Jasonoid I know you're all over it and probably tried it. LOL! I was also wondering if you can take one of the OUTPUTS and put it into the INPUT of the EB70S to charge the unit...creating a perpetual charging method. Haha. Thanks for the reply. Oh, BTW: do you have a discount code for the EB70S that can be used on their website?

You gots to ask Bluetti to send you the AC300 to review lol otherwise great review!

@Jasonoid

2 жыл бұрын

I'm too small of a fish in the sea for that battery haha.... They did just send my their pv200 solar panel. Super impressed by the build quality, still need to get a good sunny day to test

@erictafuro9076

2 жыл бұрын

@@Jasonoid Yea I’m excited about that new Bluetti 200w. I put my video out and it’s all messed up lol can’t figure out the thumbnail part and HD. Anyway I bet if you asked Bluetti they might at least give you a healthy discount on the AC300. I’ll look forward to your next review!

@erictafuro9076

2 жыл бұрын

Also imo your a top 10 KZreadr that specializes in portable solar. Make another 20 videos you should easily be in the top 5

@Jasonoid

2 жыл бұрын

Thanks Eric! I just need more people to catch on to the channel haha. I have lots of great video ideas, and reviews coming so hoping for some good growth!

I have a eb70s and I noticed I am getting only 36w when I connect the input to the cigarette lighter. I have ordered a 24v ac to dc power adapter with a cigarette light socket that can deliver 8A which is 192W! which matches with what the issued power adapter can do. My Honda has a 110v inverter output. I am going to try. Any one else tried. I'll also compare that with the issued power adapter. Reason I do not like the issued one is because of the fan.

jason can the dc to dc work with BIBENE without taking it apart ? ( bringing up the voltage ) thanks

@Jasonoid

2 жыл бұрын

No, the Bibene power station is just limited to 100 watts by software so whatever power levels of voltage come into the power station it will just limit it to 100 watts. The EB series are different because they allow 200 watts but there's that 8 amp limit so you have to use some trickery to get the full power. Most solar panels will get their power from lower voltage and higher amps (18 volts and 12 amps). So the higher the voltage you have on a solar panel, the better with the EB series.

@shaizahavi

2 жыл бұрын

@@Jasonoid so i will have to take it apart 😂

@Jasonoid

2 жыл бұрын

@@shaizahavi I'd give it a test first to see how well the 100 watts works for you, if you need more charging then do the mod. Not everyone will need faster charging.

I'm going to try the 12v upconvert but was wondering... If I have my solar connected to the MXT port can I still charge from 12>24v DC through a 8mm on the AC charging port? I am assuming yes, otherwise how could you get close to 400wats of charging. Just wanted to be sure. Thanks.

@Jasonoid

2 жыл бұрын

Yes, you can dual charge at the same time with both inputs and they peak at 400 watts.

@jeremyjulyan1449

2 жыл бұрын

@@Jasonoid Is it safe to run the upconverter from my vehicle battery through the 8mm AC port and also use the XT60 from solar?

@jeremyjulyan1449

2 жыл бұрын

Not sure on with electrics and whether charging DC through an AC port is harmful.

@Jasonoid

2 жыл бұрын

@@jeremyjulyan1449 you can only use the AC wall charger on the 8mm input jack, the other port accepts a wider range of input voltage.

@jeremyjulyan1449

2 жыл бұрын

@@Jasonoid Ok. I'm glad I asked. Was planning to connect to a 12volt vehicle battery, upconvert and connect via the 8mm. Will look into another plan. I have a couple of 300watt and 400watt inverters. They should do the trick. Thanks Jason!

can it be done with ac200p? wherwe to find power supply for 35+v and 12a?

@Jasonoid

2 ай бұрын

I made a better video using larger converters here: kzread.info/dash/bejne/e2tstNqjgru6npc.html

.. quite clear with the step-up unit. but still wonder, if it must be true sinewave inverter (what i think it´s supposed to be). the reason is for emergency cases, when power station runs low, no sun available and severe need of power .. means charging from the car without running it for hours. modified sine inverter with let´s say 700/1000 watts (for ecoflow 600W charging) is much cheaper - that´s why. looks like nobody dares to try and eventually ruin their power supplies ;-) ps: looks like they made it a bit better with the 2 inputs on 55, but still have the limit on the mppt-input; can´t believe it, not fitting that even to their own panel.

I have a question 🤔 is it possible to use a dc to dc adjustuble converter connected to a solar panel maybe over panel a bunch will it work to charge the eb70 or eb55 since you can only get 160w even if you over panel maybe I can get the full 200w out of the dc to dc converter 🤷‍♂️🤷‍♂️

@Jasonoid

2 жыл бұрын

I tried the DC to DC converter with my solar panels and it didn't like the higher voltage of the solar and wouldn't output 24 volts. I might try another method in the future but it would be around $70 so trying to debate if it's worth it or not... Haha

@alexcandelaria590

2 жыл бұрын

@@Jasonoid I tried with the same boost converter u have and I find out those only output 24v when at 13.5v or lower down to 9.5 but if u try to input more than 14v it doesn't work idk why but I was thinking maybe if I try something like the adjustable ones those can handle the 20v of the panel and turn it into 24v I ordered one just to try if it works I let u know but I don't have much hope 😆

@JonathanRamse

Жыл бұрын

@@alexcandelaria590 Did you find a way to get it to work? I'm also trying to get more than 160w out of my 2x 100w panels.

@alexcandelaria590

Жыл бұрын

@@JonathanRamse i haven't find a dc to dc boost converter that can handle the voltage from the solar panels and put out the full power from the boost converter but honestly from many many try I don't think it's possible at the moment maybe in a future with the right panels and the right boost converter

@JonathanRamse

Жыл бұрын

@@alexcandelaria590 thanks for the quick reply. Do you think a 24v PWM might work? The issue is that you can't series connect the panels to the EB55/70 directly, but if you series connect your panels to the 24v PWM and then connect that to the battery, you've upped the voltage while maintaining the amps below the 8amp limit. I'm new to this so I'm just trying to find a work-around that wouldn't damage anything.

If I use the 12 volt to 24 volt booster in my car will not blow the fuse?

@Jasonoid

2 жыл бұрын

It will blow a fuse, you'll want to use a direct fused connection to the starter battery (or secondary battery).

@Mike-.

2 жыл бұрын

@@Jasonoid awesome thanks!

12v to 24v can this be used inline from12v solar panels for boost to EB70?

@Jasonoid

2 жыл бұрын

No, the DC to DC charger does not like the voltage over 13.5 volts (solar panels put out around 18volts) and it won't convert it up. I tried that out. Still looking for other options to boost the solar voltage.

@JeffSkymaster

2 жыл бұрын

@@Jasonoid Thanks for the reply, Could you put the solar charge controller between the Panel to the converter to regulate 12v input ? thanks for your time.

@Jasonoid

2 жыл бұрын

That may work, it depends how the charge controller will react to the DC converter pulling power. I will write down that option and I'll see if I can test it in a future video

@edgarguzman6755

2 жыл бұрын

@@Jasonoid just to make sure I understand, your videos regularly refer to solar panels as "12 volt" even though most are truly 18 volt; you've even referred to the Bluetti SP200 panel as a 12v in your other EB70 and EB55 reviews. On notion of 18v, it makes sense that the 12 to 24v dc to dc converter wouldn't work. With that said, why do you keep referring to solar panels as 12v and 24v? Just asking for my own understanding...

So I ended up buying both of these batteries as well as the explorer 240’s… I noticed not the Bluetti’s say eco mode and yours don’t…

@Jasonoid

Жыл бұрын

Google how to turn off eco mode on the EB70, there's a way to disable it by pressing two buttons at the same time.

@jesseherrera6261

Жыл бұрын

@@Jasonoid is there a benefit to having eco mode off or on?

@Jasonoid

Жыл бұрын

@@jesseherrera6261 It only is good when you forget to turn off the AC inverter. I don't like to use that mode because I like to run small loads overnight and and I don't want to wake up to the outputs turned off.

Users of the EB55 have reported that an error message may appear when using the AC output. The message is "SHORT" in red. Does anyone know how to reset such an error message?

@Jasonoid

2 жыл бұрын

To reset it, you turn off the AC output and then turn it back on. That error is usually caused from trying to pull an inductive load that requires too much amperage.

Can the eb70 be charged at 400w also?

@Jasonoid

Жыл бұрын

No, just the EB55 with the dual charging ports.

how do maximize the solar charging?

@Jasonoid

2 жыл бұрын

Find the highest voltage 12v solar panel. There are some great 200 watt glass rigid panel options with higher voltages. Rich solar, BougeRV. No one makes a 12v panel with 28 volts so you'll never see the full 200 watt input on this power station with solar.

OK, good, so there is no way to dual charge the EB70??

@Jasonoid

9 ай бұрын

Nope, there's just one charging port on the EB70

@ryzkhov

9 ай бұрын

@@Jasonoid and this is very unfortunate. I've managed to connect an additional charger to my ac200max with an xt90 connector, plus 600w for only 35 usd.

@Jasonoid

9 ай бұрын

@@ryzkhov the EB70 is a bit dated now and lacks the newer features. Bluetti will be coming out with a new AC70 soon to replace it.

I find it a little disappointing that the EB55 has more flexibility on DC inputs than the EB70. I'd expect the bigger model to be more inclusive.

@Jasonoid

2 жыл бұрын

EB55 came out about 6 months later and they had a chance to refine it quite a bit.

Question in my car could I hook up the e55 to my cigarette lighter port and also use the ac Brick and plug that into my 150w built in inverter? So I am essentially getting both dc and ac power at the same time?

@Jasonoid

2 жыл бұрын

Yes that will work! As long as your inverter supports 200 watts, the AC charger will try to pull 200 watts and might blow the fuse for a small 150 watt inverter. I answered your previous question last night 👍

@blitzsteinaaron

2 жыл бұрын

Oh ok thank you so much. I figured the charger would get limited to 150 watts but sounds like it will try and pull more watts. Thank you so much for getting back to me!!

@kenmoist

2 жыл бұрын

@@blitzsteinaaron thats what i was hoping to do. My Chevy van has a 110v 150 watt outlet. I was hoping to use the Bluetti AC charger in that, but it sounds like it might blow the fuse.

@kenmoist

2 жыл бұрын

I tried the 200 watt charger in my 2018 chevy express 110v outlet rated at 150 watts. Shut off and wouldn’t drive the charger. I’ll have to use the 300 watt Bestek direct to the battery to power the 200 watt brick

Unfortunately, I've already returned two of the eb55's. They are absolutely junk. Had high hopes but they turned out to be useless. They work until you use them close to capacity and then the screen shuts off. They will no longer charge, turn on or do anything else.

@Jasonoid

2 жыл бұрын

I'm curious how the battery would ever get that low. Once the AC or DC output shutoff from low voltage did you turn back on the output and keep using it?

@xcrazydx

2 жыл бұрын

@@Jasonoid wasn't low. test done on full charge. rendered two units useless, inoperable in less than 5 minutes.

@Jasonoid

2 жыл бұрын

@@xcrazydx crazy odds that happened to two units! I have charged mine and discharged it 20 plus times with no issues. Heavy loads too

@xcrazydx

2 жыл бұрын

@@Jasonoid I know, I wanted it to work and chose it even though it has an inferior display. I chose it for the battery chemistry and better inverter. But, like will prowse says, sometimes his works and yours doesn't. lol

So why bother trying to charge those Bluetti's faster? Just get an Ecoflow River Pro or Max which fully charges under two hours with just a plug and play charger.

@Jasonoid

2 жыл бұрын

There's benefits to both models. Doesn't the ECOflow river only charge fast via the AC charger? So you'd still need a generator or high power inverter on the go (this video is about charging on the road). The bluetti offers Lifepo4 chemistry which has a much longer life and no fire risk. Basically there are good things about each battery, you just gotta chose what works best for you.

@steverogers427

2 жыл бұрын

@@Jasonoid Yes, you are correct. Each has his own strong and weak points, but for the Ecoflow's I don't need to buy other stuff just to make it charge faster or modify my vehicle just for that purpose, which again costs money. Charging the River on the road only needs at least 3 1/2 hours on the car charger, which comes directly out of the box (Warranty intact). Which in turn translates into more usable time.

@kenmoist

2 жыл бұрын

@@steverogers427 are you charging out of the vehicle cigarette lighter?

@craigmorton644

2 жыл бұрын

Swapping a faster charge cycle for more possible dangers, and a lifetime of 1/3 of the bluetti... Eco flow river Life cycle 800 cycles... Bluetti eb70 life cycle 2500 cycles... Also the eco flow uses semi dangerous Lipo batteries which can go on fire and explode.. Bluetti uses lifepo4 which do not present a danger to go on fire or explode. There's many pros and cons across the board but I value a 3x higher lifetime and safety over a faster charge cycle.

Wow.. its incredible that i cant do that, charging solar and 220 v at same time with my Bluetti Eb70.. With more storage and being more expensive.. What a shit!! Is not there a way to trick to solve this? I supopouse no.. All we have the EB70 must charge at 200 W and spend 4 hours.....

@Jasonoid

Жыл бұрын

The EB55 was a newer product and they upgraded some features over the EB70. I'd love if it could dual charge!

@josemanuel2118

Жыл бұрын

​​ @Jasonoid - Solar Power, Batteries, and More! You are right in this. I am happy with my Eb70 just charge is very slow. By the way.. I discovered a new posibility.. charge my car battery a bit from my Bluetti in case i got my battery car empty accidentally (i had this in the middle of ski station one day and is not nice). See this conector dc 5,5 2,1 to battery aligators.. Its not looking nice for bluetti dc 5521 output? I think this should work, no? This would put 120 W in the car battery in one hour directly from bluetti (no?) and would save the situation. By the way, an easy and not too expensive to charge bluetti at 200 W inside the car at 200 W/h instead 100 from cigarretes? I suppouse a cheap 300 W inversor maybe.. Not sinoidal (which are expensives). But i dont know if can be bad for the bluetti or can damage it.. www.amazon.es/CERRXIAN-5-5x2-1mm-cocodrilo-seguridad-Iluminaci%C3%B3n/dp/B08HWCZDDK/ref=sr_1_3?__mk_es_ES=%C3%85M%C3%85%C5%BD%C3%95%C3%91&crid=BQZPCAPC1QL8&keywords=dc+5.5+2.1+a+pinzas+de+arranque+bateria&qid=1669758665&qu=eyJxc2MiOiIxLjczIiwicXNhIjoiMC4wMCIsInFzcCI6IjAuMDAifQ%3D%3D&sprefix=dc+5.5+2.1+a+pinzas+de+arranque+bateri%2Caps%2C254&sr=8-3

One question if its plugged to the wall or solar and vet disconnected. Does it continue to power devi es

@Jasonoid

2 жыл бұрын

Yes, if you have this plugged into the wall charging and you unplug it, it will continue to run devices off the internal battery until the battery dies.