GET THE MOBULA6 HDZERO HERE and use Shogunemperor for discount:- shop.makerfire.com/products/happymodel-mobula6-hdzero-65mm-hd-brushless-whoop-with-hdzero-nano-lite-camera?_pos=1&_sid=2eb2897d8&_ss=r&aff=399

Loving the channel so far! Thanks Shogun!

@shogunemperor

2 жыл бұрын

Aawww thanks bruh! Really appreciate the love! Do feel free to suggest what u’d like to see in the future!

Great review thanks for the tips and awesome piloting. I wish Happy Model would make a 85 mm version for 2s they handle the wind better

@shogunemperor

2 жыл бұрын

aaw thanks my man! Much appreciated!! Yeah, I think they might be in the process of doing so. Not sure yet though.

Ahh these are a lot of fun!

@shogunemperor

2 жыл бұрын

RIGHT???? i think its nice to just rip it around without much stress... hahah

Very cool instructions thank you!

@shogunemperor

2 жыл бұрын

Thanks so much bruh! Really appreciate it my man! Hope it was clear. I sometimes miss out important stuff

@MickRatanapanyo

2 жыл бұрын

@@shogunemperor I shall find out when my M6Zero arrives 😁

@shogunemperor

2 жыл бұрын

@@MickRatanapanyo sweet!

Glad u liked Bluejay! I run it on all my micro's, plus if u didn't know u can add custom startup tones!! I use the Batman theme one haha! P.S - thanks for the shout out bro, gotta admit kinda embarrassed as my channel is rubbish as i haven't uploaded in ages🤣

@shogunemperor

2 жыл бұрын

Hahahah yeeess! No thanks to u! LOL thanks so much bruh! Hahahah no worries man. As they say, hakuna matata! Time to upload some vids bruh!! LOL

Cool video, I hope mine arrives before Halloween 🎃 lol 😕😕😕

@shogunemperor

2 жыл бұрын

thanks for the support my man! Yeah, lets hope it arrives soon!

Brilliant mod! I think the 96khz does give it that extra edge for its small form factor. As a non-acro FPV flier, I am more interested in the other frequency setting esc-flashing that gives longest flight time. Nonetheless, this mod is really cool too! 👍😎

@shogunemperor

2 жыл бұрын

Thanks so much bruddah!!! Ya man. 1st throttle up i was like.. “WHOA!!! And then I was like… “whoaaaa”…. And then I went… “whoaaaaaaaAaaaaoooooo…”

@shogunemperor

2 жыл бұрын

🤣

Dude! thanks for the plug! how did the 96khz pwm effect the throttle and hover point?

@shogunemperor

2 жыл бұрын

hahha pleasure bruh!! Yeah, the throttle is lighter and hoverpoint around 30-40%-ish? Feels nice man!!

Its strange... I see so many people say 48kHz is better. But I actually seem to get longer flight times on 96kHz with no negative side effects

@shogunemperor

Жыл бұрын

EXACTLY MAN!!! Its strange that it works for some and not all. But yeah, loving it at 96khz!!

Hi, I flashed Bluejay 0.16 to Happymodel Mobula7 ELRS X12 v1.0 at 96KHz motors didn't start. At 48KHz , Bidirectional Dshot 300 with Rpm filtering, it's flying ok, not great, but I often get temperature warning , I noticed CPU load at 38%. Could you advise ? Thanks.

@ndtran9913

2 жыл бұрын

In your video, I noticed you didn't enable Bidirectional Dshot and rpm filtering...

@shogunemperor

2 жыл бұрын

Hey bro!! Yes, I didnt in the video as I forgot to(much apologies), but the actual one I did enable it. Dont forget to bring the startup up to 1100. CPU load at 38 is ok. Of course if u can bring it down in other areas would be great. But my other whoop couldnt be flashed with Bluejay.. so i think its the bluejay version as its still in its experimental stage.

Oh cool. I going to flash some tiny whoops tonight

@shogunemperor

2 жыл бұрын

hahahah not necessary for the Mobula7s though.

@DonCarlyon

2 жыл бұрын

@@shogunemperor mobeetle6?

@shogunemperor

2 жыл бұрын

@@DonCarlyon Wait.. is there a problem with ur mobeetle6?

@DonCarlyon

2 жыл бұрын

@@shogunemperor haha not that i know of hahaha

@shogunemperor

2 жыл бұрын

@@DonCarlyon for mobeetle6 leave it as it is. Its flying well.

Looks good. I put the new happy model elrs spi board in an old mobula6 with 0802 19,000kv motors. It's flying really well on BF 4.3 final and I get 3.5 to 4 minutes flight time on a 350mah battery. Do you think it would be worth trying bluejay on that configuration?

@KlownFPV

2 жыл бұрын

It certainly wouldn't hurt. I flash bluejay on all my micros and it's really nice

@shogunemperor

2 жыл бұрын

thanks bruh! Yeah, the flight time definitely improved after Bluejay! I havent tried it yet, but u should just do so, if you dont like it, you can always flash it back to the backup. I'd try it though.

@kurtzFPV

2 жыл бұрын

@@shogunemperor Yes. Went ahead and did this and also enabled bidirectional dshot and rpm filtering. Didn't see any improvement in flight time, but she flies smoother. Like I said, was flying pretty good before this, but had a small amount of propwash when pulling out of a steep dive, which is completely gone now. Thanks. Great suggestion.

@shogunemperor

2 жыл бұрын

@@kurtzFPV sweet man!!

Hi Shogun, I flashed the firmware and flew a few packs then had motor problems where it not all props would spin up. Could not work out why and could not get it to fly so as a last resort went back to original 16.9 blheli and it flew fine again. Any ideas as to why bluejay did not work for me. I have the 19000 kv motors?? Thanks in advance. Regards Brook

@shogunemperor

Жыл бұрын

Thanks for dropping in bruh!! Did u increase the startup power for bluejay? It requires a higher idle speed. 1050 it will stutter... I had the same issue too.

Nice trippy spins man. So, do you recommend 96khz bluejay for a standard mobula6 also?

@shogunemperor

2 жыл бұрын

Hahah thanks bruh!! Hmm… the standard Mob6 has the JazzMaverick… but i see no harm in trying the 96khz on bluejay. I think it will make it respond quicker.

@shogunemperor

2 жыл бұрын

Maybe I should try that too… hehehe

Hey man! I got my mobula 8 o3 and ive been flying the frick out of it! Really amazing. Alot of fun. I notice at start of my flights i get alot of shaking, but as the voltage goes down it isnt so bad, also at rhe start of rhe battery when i throttle up it shoots up to the sky a little uncontrollably, would this be my bluejay settings? I flashed it with 48khz and jist coppied the happymodem manula for other reccomended settings, other rhan that flys great just feels shakey at the start of the pack

@shogunemperor

11 ай бұрын

Hey bro! Glad ur enjoying it man! No, thats actually the high voltage of the lipo and settings from the higher filters settings that causes that as the Mob8 was tuned pretty high to sustain its acro abilities. So any higher it will go nuts when u arm it. One way to soften this is to turn on the vbat compensation or decrease the filters on betaflight. But it might make some weird changes so i suggest just leaving it as-is to avoid trouble. Its the same with mine too. Thanks for dropping in bruddah

@oisinogorman35

11 ай бұрын

@@shogunemperor hey man, funny news, went to change the khz before I saw this comment, flashed it with the 96 khz in bluejay, but must have missed some settings reverting to default, so when I powered up I burned my esc and one motor lol, new aio on the way and new motors, also some 750 mah hv batteries, one day I'll have like 10 packs but for now 4 will do, think you could enlighten me on the nature of bluejay? Why did this happen to me? Really just curious what I did wrong

@shogunemperor

11 ай бұрын

@@oisinogorman35 NOOOOOOOOOOOOOO Im so sorry to hear bruh!! But shit like that happens all the time. If u asked me, it couldve been a loose wire or something. I’ve had that happened to me several times.. a stray positive wire strand touching the negative after a crash. Who knows. The possibilities are endless in these situations..

@oisinogorman35

11 ай бұрын

@@shogunemperor hahahaha ahhh oh well man, like you said, this is just the game! I'm actually really looking forward to building my mobula, it's a good step for me in the FPV hobby, and god damn I can't wait to fly more :) thanks for replying dude, I love your tinywhoop vids they're what sold me on the mobula :)

@shogunemperor

11 ай бұрын

@@oisinogorman35 aawww.. thanks so much for the support bruddah. I really appreciate it my man. Im glad ur loving it as much as I do. Have a good one n happy flying bruh

I need to remember to use Blujay instead of Jesc

@shogunemperor

2 жыл бұрын

Its actually my 1st time using Bluejay, im usually on Jazz Maverick.. but this thing is something else!!!

wtf was that trick at 3;30 ??? power loop yaw spin sidways ?

@shogunemperor

Жыл бұрын

ooooohhh!! hahahaah that was an inverted yaw spin through a gap.. but the damn ESCs gave out.. heheh

@nathanloopz6175

Жыл бұрын

@@shogunemperor id be calling it a trick, down a dive

@shogunemperor

Жыл бұрын

@@nathanloopz6175 hahahaha makes sense!! Thanks so much for dropping in bruddah!! Been awhile! hehe

Hi, yes better Bro

@shogunemperor

2 жыл бұрын

haha thanks bruddah

Did you say "tchau" at the end of video? It's the same word that we say here in Brazil, where we talk portuguese (of Brazil, that is a little different from portuguese that is spoke in Portugal).. Hahaha Where are you from?

@shogunemperor

Жыл бұрын

hahaha sim bro!! Eu fiz!! Im actually of Portuguese descent but Im born in Singapore. My grandmother was a lady from Lisboa. I spoke Portuguese when I was little... whats left now is a very broken Portuguese!! hahaha Obrigado por ter vindo bro!!

@drone_fpv

Жыл бұрын

​@@shogunemperor ​ Hahaha nice man! Singapore must be a very beautiful country with a very different culture of Brazil. It's great to know that we have pilots from our job around the world. I was watching your video because I have a mobula7 and I am trying to use bluejay in my esc's, but I am not gettinh success yet. But I am trying and testing some values to parameters =) Nice flight man and have a nice day!

@shogunemperor

Жыл бұрын

@@drone_fpv hahah yeah man. Diversed indeed!!! ooooh!! OK! Make sure all the motors are on REVERSED on esc-configurator.com for Happymodel motors. In case you havent seen it, here's a video i made:- kzread.info/dash/bejne/pZWot82pYdasn7A.html

@drone_fpv

Жыл бұрын

@@shogunemperor ​I tested and the motors was rotating to the correct direction with direction "normal" in esc-configurator, but my problem is that in low rpm (between 1000 and 1200 of power on betaflight motors tab) my motor number 1 it's not rotating and it's only vibrating. But if I change the params of min power and max start power on esc-configurator, motor 1 works but motor 3 stops.. hahaha The problem is that on bluejay firmware I can't set this values individualy by motor. It's a general param that is assumed by all 4 motors. I think that, as my motors are not so new (they already shocked sometimes with the wall.. hahaha) they have different parameters, then maybe I need to set different values to min and max power on esc-configurator by each motor. This option is not available, then I am trying to find a value that works good in all 4 motors. 😄

@shogunemperor

Жыл бұрын

oooooh for bluejay u need to boost the min power to 1100 and max power to 1250