Blow-By / Symptoms and how to FIX it /
Автокөліктер мен көлік құралдары
Donate me on Patreon. Anything will be appreciated!!
/ ezmeck Crankcase gases that build up are called blow-by, which is the production of combustion material from the combustion chamber. These blow-by gases can condense and mix with the oil vapors. This combination will create sludge or cause oil to become diluted with the fuel that hasn't been burned.
PLEASE SUBSCRIBE TO MY CHANNEL AND PRESS THE BELL ICON TO STAY NOTIFIED.
IF YOU ENJOYED WATCHING THE VIDEO THEN LIKE COMMENT AND SHARE THIS VIDEO. THANK YOU!
FOLLOW ME ON FACEBOOK
/ rajib.sarkar.39
FOLLOW ME ON INSTAGRAM
/ ezmeck.yt
Пікірлер: 27
Sir aapki video mujhe bahut achha laga hai Maine abhi apka channel subscribe Kiya
Keep It Up Bruhh 🤝
Great info
Nice.. Class bro... Superb... 👍👍👍👌
Thank you Bhai ❤
good info 🥰
Good explanation bro
@EzMeck
3 жыл бұрын
Thank you
🎉🎉👍🏻👍🏻
Bajaj platina bike ke engine air breathing pipe me pani aane ka reason? Bike dhua nahi deti .
I have excessive Blowby in my 1.9 TDI ALH engine. Oil leak on crankcase seals and breather. Coolant temperature is less and it takes more time to reach 90° even in hot afternoon. Low boost, some noise in one cylinder suspect it to be a piston valve. It takes an extra crank on cold start only and it starts immediately rest of the dayl. Turbo actuator is stuck i guess. What is your advice in this scenario?
Bro waiting for your clutch push rod adjustment in FZ S V2. I will follow that before installing R15 V3 slipper clutch.
@EzMeck
3 жыл бұрын
Yes this will be the next video
👍👍🙏
👍👍👍👍🙏🙏
Valuable informative video.👌👌, Bro I'm planning to buy a new bike in 150 segment, I need a suggestion from your side. Requirements milage, comfort like SZ , smooth and quality engine & linear acceleration is enough for me no need of instant acceleration.
@EzMeck
3 жыл бұрын
Fz v3,
@sureshms2k16
3 жыл бұрын
@@EzMeck thank you
I have change the block and piston but than also after few days the smoke comes out what is the problem ?
@EzMeck
3 жыл бұрын
May be there is something wrong with the fitting or Piston rings position. Some gasket may be blown. Or there might be some other defective parts which was left ignored.
😎😎😎
Can you tell which year you pass out mechanical engineer
@EzMeck
3 жыл бұрын
I studied physics, 2016 batch.
@debojitdhar502
3 жыл бұрын
@@EzMeck thanks bhai
Any chance you can make this in English
@EzMeck
2 жыл бұрын
I can put subtitles, but as my channel is in hindi language so I stopped making videos in English.
What?