So, so helpful. I'm surprised how such a simple thing is so hard to come across, so thank you for putting this out here, especially in such a concise and informational manner!

I cannot express my gratitude enough! I stubbornly refused to use Blender 3 because the installer I got was for 2.8 which someone told me was better. I got really comfortable with modeling but spend, no joke, 4 days trying to get textures working! I tried 3 but found it even less intuitive, but your video made it easier than ever, thank you!

One of the best short tutorials on uv I have seen, simply put and great paced. Cheers pal

Thank you! This tutorial is so helpful, especially in texturing landscapes (like texturing a transition from grass to rock to snow) and other meshes. Thanks again.

Thanks man! You helped me a lot! Please, continuing with your tutorials, because they are so helpful.

Yess this was exactly what I was looking for!! :D and simply and eaisly explained! Thank you for the awesome explanation!

Dude, Thank you so much! Amazing tutorials!

I have been messing about with Blender and other 3d software for years and I got to say this is one trick I never knew about. 👍👍👍👍👍

Your demo is really really good. A lot of blender demonstrations are super hard to follow, so kudos to you. I think for newbies we get some weird setting accidentally set and then it doesn't behave the same. In this video I had just one stumble where the grid for the unwrapping didn't show. Clicking the "UV Sync Selection" button to keep the edit view in sync with the UV panel -- then the grid showed.

@TutsByKai

2 жыл бұрын

I really appreciate that Jeff! Ahh, I see. Gladly you were able to figure out why the grid was hidden!

@marcossouzajr1711

Жыл бұрын

This works, this is an example of how a tutorial totally fail when a simple tick on a tiny button is not told.

I can’t move it

@aleksdizhe

4 күн бұрын

whats up?

Thank you! Very helpful tutorial! I can do a lot of things with this!

Defo Subscribed! This was so much fun!!

Thanks for the video! helped me a lot!

Thanks so much this really helped me. I’ve been stuck on this for a while

sicc, keep up the great work my guy

Almost scratched my hair out then I found your video you're a hero man

THANK YOU! Really easy to follow, even for a total noob like me. You're the best, dude!

Thank you so much! I was going crazy because I couldn't find this option any more!

This was sooooo helpful!!!

Fantastic! I was getting so stonewalled by this, and AI guidance put me on such a wild goose chase. Big help, thanks kindly!

That was helpful, Appreciate it!!

thx for being straight to the point :)

Thanks for another Tutorial!

Thank you so much for this footage!

Thank you for this, very helpful :)

dude i just stumbled on this channel, aren't you like super underrated? damn

@TutsByKai

2 жыл бұрын

Thank you man, I really appreciate that!

Hi ty for the tuto! I wanna know how you can apply a different image to each side, ty!

This is great! Could you do this with a video file instead of an image and have it play on an object?

Thanks for the helpful tutorial

Nice vid. It has been helpful. How differently would I do the face select part for a keentools facebuilder model?

So helpful, thank youuuu

Thanks for the video, is it possible to add a moving image over a 3D object in blender?

Hey TutsByKai! Could you tell me how i export my obj with the images on it? (if i export my obj, the image will not appear)

What do you do about images that are seamless patterns? Like swatches designed in Adobe Illustrator or something tileable.

Tysm this helped alot

Very helpful, cheers!

I'm trying to set the image to be on only one side, but it's not working. How do I set the image to 1 side only?

@TutsByKai , it dosent have the button for selecting mode, what do I do?

what so do if your cube has bevel so has smooth edges. My UV map has many faces and also some of the cube faces are split in hald and are on other areas. This is so hard to explain basically my UVmap looks a lot more complicated than yours and i cant simply resize 6 faces to the size of my image. Is there an easier way to do it?

THANK YOU SO FREAKING MUCH AHHH

Does anyone know how to resize the texture in UV Editing?

Hi, I watched this video. It's a great tutorial. But, this only works if the object is cube. I have a 3d rectangle and a rectangle poster, I want to stick that to the rectangle.But does not work. Can you make a tutorial for that. Thanks

hey man could you help me, so i got a 3d model and did all the unwrapping and all that and i got done painting it and i go back to layout and the paint is gone and i dont know how to apply the texture, if you know what im talking about could you help?

thanks for making this awsome tutorial for free

Oh, that’s cool!

THANK YOU

Does anyone know why I can’t seem to see the images when I render??

thanks this helped

I want to be able to add my heatblock so I can make a mold for a silicone sock can you help me?

thank you for a really simple blender tutorial. I could actually follow this. Do you have a complete series. I use b for artist UI btw. This video does help a bit. Even if you do have to press 1 to many button instead of just say selecting a tool. tool options, the you simply us your mouse to drag and scroll. or using a tablet pen to move the image the way you want. Fact: blenders UI, is 10 years out of date. for inclusivity, intuitivness, and simplicity. (and the core coder team does refuse to update it so those in the creation field with autism and low income can use it and have a frustration free experience) it also has 20 million complaints about it. yet they state the only have 14 million down loads haha.

I have a model that is not a cube, and my texture just stretches, while the texture is a 16x16 texture, how do I fix it? I clicked on "repeat" in the image properties - same thing

Thanks for explaining this so simply! All I'm trying to do is add an image onto a television screen object, and every other tutorial was convoluted and didn't even address simply adding a flat .png onto a flat object

@TutsByKai

9 ай бұрын

Glad it helped!

Thanks so much!

Thank you! ^^

Cool video , but how do you put images on a 3d object with curved and and round edges?

Can you do a tutorial on how to do it on one side and it’s a circle please 🥺???

Does this work for putting designs on mock ups ?

Outstanding these are the ones with does it work with any texture init

when i export them it doesn't have the texture on them. how do i fix this?

Can you sculpt with the image on the model?

What if the perspective of the imported image is different? Slightly side view but not fully.

Awesome

Thank You

@TutsByKai after I import into Unity I can’t see the image. Btw I love this tutorial!!!

This is the first time I've seen your channel. Can you also do this with video clips on the cube face for its different faces e.g. all four sides but leave the top and bottom free. If you have a link if you've already shown this it would be much appreciated. Thanks :)

TYSM

I love this tutorial straight to the point and informative but i need help flipping around a cylinder

does this work with Mac computers?

Hey there. How do I do this on other shapes? Like a sphere for example. I have a can and nothing shows up when I click tab.

@TutsByKai

2 жыл бұрын

You have to unwrap it still, it just won't be as easy to map, because it's not a square!

the vertex aren't appearing on the uv editor please help :((

there is still a part that white in the faces and wont allow me to place the image texture in that area

Tab button is not working for me...is there any other option to obtain the sides of square after applying the image

I got to upload the image but didnt see any squares in UV mode. Went back 5 times. Maybe because I have a newer version

Looks clear and effective. But the faces of my cube are triangles in UV editor 🗿 how to make it square?

Getting into the real complex stuff I see

@TutsByKai

2 жыл бұрын

Beginner or advanced. I make content for everyone.

@drumboarder1

2 жыл бұрын

@@TutsByKai even racists?!

@SMHorne

2 жыл бұрын

@@TutsByKai Thanks! We've all got to start somewhere! 🏆

@BigBankzSon

Жыл бұрын

​@@drumboarder1 yup

thanks you

I am a novice so please forgive me probably asking silly questions… but I’d like to add an image containing transparent area’s, would that make a difference? Would I need to delete the cube’s faces? Or just construct a cube from the image itself?

how come this doesn't work for objects that have been sculptures? I've tested and I can see the image on a cube but when I use a sculptured cube it doesn't appear and it shows as a white colour?

3:05 you can separate the single box out, but in my case it drags along the adjacent boxes together

@seashellstorys1265

2 жыл бұрын

Same how to fix?

@MrJjjakey

2 жыл бұрын

next to the UI mapping selection where you picked face mode change "Shared Vertex" to "Disabled" and now you can move the UI maps like the video

@iris98

2 жыл бұрын

@@MrJjjakey idk how to do that and i have the same problem as the person above :(((

@MrJjjakey

2 жыл бұрын

@@iris98 im gonna be real with you, the first and last time I've touched blender was that comment 3 weeks ago. all I remember is doing what I said managed to fix it, good luck soldier

@iris98

2 жыл бұрын

@@MrJjjakey I DID IT OMG SJCJSHDJW

0:34 i did but different stuff shows up that i dont understand

Why the face select these stick together I can't move one of them

Can up have multiple images (one in each face)? Can those be exported as uv bitmap?

@TutsByKai

2 жыл бұрын

Yes! I'll be uploading another tutorial just for this very soon!

@nojnavick

2 жыл бұрын

You could make them one image and then just select different parts

@coolzack1012

2 жыл бұрын

@@nojnavick thats how it was in the first part of the video

Thaaaaaanks!

when i try to move the faces they are attached together

Why is my image on the cube static, and not what it shows?

hey, really sorry to bother you but when i pressed tab the squares showing the sides of the object didnt show up? can you provide me with any help?

@genuswater8011

Жыл бұрын

Instead of hitting tab, there is an icon in the top left corner next to where you select your view with two arrows pointing in different directions diagonally - hit that instead.

@namira3537

Жыл бұрын

hey man, i spent hours and cant find the icon. which one is it? im starting to feel like i want to cry :') thankyou in advanced

@genuswater8011

Жыл бұрын

@@namira3537 If you have an object selected (the object you want the UV skin for) then you change to the UV editor screen, press tab, you should see the layout of your UV. If you don't there is a button with two diagonal arrows right next to the view drop down button.

@socarnaytoo8518

27 күн бұрын

You have to have the cube selected in the right hand window if in object mode click on the cube it should turn yellow switch the right window now to edit mode some use the Tab key or you can use the drop down menu you might have to mouse scroll to get to see all the menus in these smaller windows, now over in the left "UV" window you should see an icon with two arrows one is pointed up to the right the other is pointed down to the left hover over it with the mouse pointer and it should say UV sync selector click it that should restore the boxes on the UV map. This reply is for others who have had the same problem like me.

thank you , i solve my mistakes

This is a very helpful video. How do you add multiple images to a single object? I am trying to re-create a product box in Blender and each side of the box has a different image. How would I do this?

@TutsByKai

Жыл бұрын

Glad to help!!! If you hit tab to go into edit mode, select the face you want to put the 2nd image on, then go to the the material tab, create a new material, hit assign and add the image texture like we did in this video - that should do the trick! Sounds like a lot more steps than it actually is HAHA!

@MindEyeMediaVR

Жыл бұрын

@@TutsByKai Do I add the next image as another Base Color, or do I add it somewhere else?

kul tutorial

Would it be possible to put a different image to the other sides of the cube? Please somebody explain.

@bsgoodmail

Жыл бұрын

okay, got it, just merge images you want to use into a single image and use this mega image - select parts of it for different sides.

can it be any file image ?

"Unwrap failed to solve 1 of 1 island(s), edge seams may need to be added " does anyone have this problem ?

i'm trying to use the same health model for both small and medium health, but the creator only made one health model, and made a .bmp for it. so when i rename medium to small, it replaces the original model but still pulls from the same .bmp file. in this case, i have no other option but to open it up in blender and look for the file name, and simply change it. however, upon opening the model in blender.. for one thing i don't know what I'm doing, but I still looked pretty much everywhere but I cannot find any info about the file name. at a bit of a loss here..

@TutsByKai

2 жыл бұрын

Try exporting the bmp from Blender and placing it in a different folder before importing again! Hopefully that works.

@_ZIN_

2 жыл бұрын

@@TutsByKai oh, so what's going on is, i can open the model file in blender, but it doesn't show a model, it just shows a cube with arrows. upon looking through all the options and digging through menus, i cannot find where it shows the bmp file. my logic cas just load the model, change the filename, and export the model, and just do that for each color model needed, but i have no idea what i'm doing.

@_ZIN_

2 жыл бұрын

@@TutsByKai honestly my guy when i open the file in blender all i see is a cube, and i've clicked on pretty much everything clickable looking for the filename that it uses to no avail so at this point i'd rather just find someone who can do it, as i don't have the time to embark on an entirely new time consuming learning curve project. all they need to do is download the model, load it, then make two clones of it that call for two different mesh bmp's, of course renaming them both something different than the default one. i'm pretty cure i can just change the color of the bmp's through using irfanview or photoshop without ruining the actual gradients.

how to add an image to a sphere (lego man head) please help !!

ty for tutorial

when i click the material thing in the top right nothing happens

This might not be the right place to put this question, but I'm hoping someone can help me. With this video I was able to get a image onto a sphere, but uv editor screen there is nothing to select to scale or move. Any advice is appreciated

@krown466

2 жыл бұрын

Im having the same problem im trying to add a video to a tv screen and when i look in the uv editor there is nothing to choose. Also the video file i put on the tv screen is sideways.

@lancewyhowski8234

2 жыл бұрын

I thought I had tried everything, but I learned a bit today and figured it mostly out. I needed to activate the UV sync selection. It looks a little funny displayed on the object, but I had a object to scale and move

Can someone tell me how to rotate it

Thanks, 🖐

my image is flipped?