Blackmagic Design Buyer's Guide - 2/9 - ATEM Switchers
Welcome to my in depth series about all things Blackmagic Design. Let me take you on a trip to learn about the benefits of real time editing systems with the ATEM switchers and their cameras and help you find the system in YOUR budget that will increase your video output and greatly improve your workflow.
Visit Sweetwater for all things Blackmagic:
sweetwater.sjv...
#blackmagicdesign #blackmagicatem #videoproduction
I often get paid for my videos and the video itself and the following links should be considered advertising!
_________________________________________
The following are Affiliate links. I get a commission if you purchase ANYTHING after clicking on the links. This helps support the channel a lot and enables me to operate independently.
Get the Songwriting course HERE:
spectreacademy...
Here is a link to Thomann...
Blackmagic Design www.thomann.de...
0:00 Introduction
2:39 ATEM Mini
4:50 Not so great
6:25 Back to Features
7:39 ATEM Mini Pro
10:36 ATEM Mini Pro ISO
12:52 ISO 4K Workflow with HD switchers
14:52 ATEM Mini Extreme
19:15 ATEM Mini Extreme ISO
20:07 Let’s talk about SDI
28:44 Going to Monitors with SDI
30:06 ATEM SDI
30:07 ATEM SDI Pro ISO
32:05 ATEM SDI Extreme ISO
33:00 Mobile Live Streaming
33:38 Camera Control
34:47 Control Options
37:15 SDI Distribution
40:00 Picture in Picture
41:15 Television Studios
44:40 4K doesn’t do ISO
47:17 More Television Studio Features
47:56 Television Studio Pro 4K
50:22 Constellation Rack Line
55:16 Studio Converter
55:59 Advanced Panels
56:56 The previous Generation
1:01:00 Atem 4 M/E vs Constellation 4K
1:02:31 Final Words
_____________________________________________
here is a link to the AMPETE switcher:
www.musik-produ...
NOW AVAILABLE - HP42 Shirts
teespring.com/...
Link to my Patreon account:
www.patreon.co...
Find seriously different sweaters here...
mrgugu.com
Use Coupon Code "eytschpi20" for 20% OFF
"Make sure to pick up a digital copy of my entire discography, both published and unpublished, at www.therecordl..."
Пікірлер: 22
56:20 You would use multiple M/E for mixing the same inputs to different outputs. For instance, you might be mixing a church service or large event to both a live stream and large screens in the room (IMAG). You wouldn’t want to use a lot of wide shots on the screen in the room, but for your live stream, you might want to have the viewer feel like they are there. Same cameras also, the 10 series panel & the 20 series panel both allow you to switch between four M/E. You can only work on one mix at a time, but you can switch between them on the fly. This is also why they have multiple multi-views.
Wooweee two videos on the same day?! 👀 need coffee...
Thank you Henning! I was so inspired by the video you did several years ago, i finally bought my first switcher on sale at Christmas for $265, & also a Zoom LiveTrak L8 just for audio production for video. I'll be starting teaching guitar lessons next month online. Only using 2 cameras, so my demands are minimal. So thanks for the info, & the inspiration. Yep, it's all your fault, lol! BTW, I hope Sweetwater doesn't hate me, but I went with the switcher/streamer that has an off/on button, & records to the SD card I installed, yet looks very much like the ATEM Mini. (OSEE GoStream Deck)
Thank you so much for this series
Thank you for this video. Blackmagic tends to think more of its own ecosystem than use cases. There is an entire market that BM dropped the ball on - the mid-level events market. They did this by changing the configuration of the Television Studio HD. That would have been a great ballroom device because it had four HDMI and four SDI inputs. The device had 2 big things missing and one small one - it didn't do resolution conversion (in ballrooms and mid-sized events 1080p is king), it didn't have enough flexibility on the SDI outs (the could have all been assignable to whatever) and the cut button was too small. (most important button). The obvious evolution would be to fix those things, replace USB 2.0 with a couple of USB-Cs, add record function, make the dedicated AUX out assignable like the program out and BOOM! Most ballroom/mid events use computers for video playback and powerpoint/keynote, etc. The HDMI ins for those + the camera/SDI ins (many mid-level events are 3-camera shoots) made that an ideal device. Many were hoping that the ATEM extreme series would be a hybrid device like the television studio HD, and it could have been. BM decided to ignore that market for some reason, where it could have sold massive amounts of ballroom and breakout room switchers and opted for competing with Grass Valley and Ross for bigger markets. They could have done that and still developed a great mid-tier product line but instead, they choose to try to try to eek out more money in converter sales and overshoot with all SDI input products. The podcast community is happy, as are the small broadcast operations who can't afford Carbonites or the likes, but the mid-level operations are left wanting. Sorry for the rant. BM is great and annoying at the same time. Sux
ROFL - "still, no ON and OFF switch". Man you're passionate.
Great content. 👍
Neeed part 3. And to win a lottery. 😂
@EytschPi42
6 ай бұрын
In two days
Hi Henning!!!😎🤘🎸🐦
Diamond wipe?
@Audiomajik
6 ай бұрын
They should lose some of those useless wipe buttons on some of their devices and make them assignable function buttons. Most switchers ride the cut and dissolve buttons. Simple wipes > useless 80s wipes.
Hey the extreme has headphone output
@EytschPi42
5 ай бұрын
yes... I am saying that
I’m watching these out of order
@guitarraviva
6 ай бұрын
Because you suuuuuck (Henning here btw.)