Binding the RadioLink RC6GS v2 Transmitter to an R7FG Receiver | RC Racing Legends

Автокөліктер мен көлік құралдары

Binding a receiver to your transmitter is easy, even if you've never done it before. In this video, I walk through the steps to binding my RadioLink RC6GSv2 transmitter to the RadioLink R7FG receiver and outline all the extra bits and pieces needed to do it.
I've already posted an unboxing and mini-review of the Radio Link RC6GSv2 transmitter, so if you want to check that video out, you can do so here: • RadioLink RC6GS V2 Unb...
Want to get your own RadioLink RC6GS V2? Check the link below:
www.banggood.com/custlink/3KK...
The absolute best royalty-free music for your videos:
www.epidemicsound.com/referra...
Want awesome R/C-inspired merch? Check out the link below:
www.etsy.com/shop/RCRacingLeg...
FOLLOW ALONG:
Instagram: / rcracinglegends
Twitter: / rcracinglegends
Facebook: / rcracinglegends
PLEASE NOTE: Any R/C vehicles and equipment featured in this video are hobby-grade items intended for ages 14+, and are NOT children's toys.

Пікірлер: 22

  • @SuppleBun
    @SuppleBun2 жыл бұрын

    this is truly an awesome tutorial, you deserve a cookie!

  • @hexi6485
    @hexi6485 Жыл бұрын

    I found it useful and entertaining, Lt. Broccoli.

  • @harryazreen5151874
    @harryazreen51518745 ай бұрын

    Hi already purchase this! Great product. Just want to ask why my output for esc and servo is reverse? Like when i turn left on the remote it goes right

  • @RCRacingLegends

    @RCRacingLegends

    5 ай бұрын

    You probably need to go into the transmitter's steering settings and reverse the steering direction.

  • @FORD150-5.4
    @FORD150-5.4 Жыл бұрын

    I can't pair the receiver whit the transmitter is flashing 3 color ,red ,blue,and green but not bind ? I don't connect the yellow connector to the battery I don't want to use it maybe this is my problem I have to connect the connector?

  • @Bonecollector-ln6qk
    @Bonecollector-ln6qk2 жыл бұрын

    So would me not using that telemetry harness ( my rigs all Anderson) be the reason I can’t get it to bind?

  • @FORD150-5.4

    @FORD150-5.4

    Жыл бұрын

    I have the same problem i don't use the yellow connector maybe that the reason I can't bind?

  • @kingbooda9057

    @kingbooda9057

    Жыл бұрын

    I’m wondering as well

  • @MrYoohootuber
    @MrYoohootuber2 жыл бұрын

    Does the voltage alarm settings save to each individual model? E.g run 2s, 3s on different models. Would I need to change the voltage every time?

  • @RCRacingLegends

    @RCRacingLegends

    2 жыл бұрын

    Yes, its specific to each model. Each model should be tied to a different receiver (in this case they would all have to be R7FG receivers for the telemetry to work), and the voltage is tied to the specific receiver. So as long as each model has its own unique R7FG receiver, the the low voltage alarm you set (for any 2S-6S LiPo) will be specific to that model.

  • @MrYoohootuber

    @MrYoohootuber

    2 жыл бұрын

    @@RCRacingLegends that fab, thanks for the quick reply! I’ve been in two minds over getting this or the GT5. Like the format build and folding antenna on the GT5 but this radio link telemetry, range, control and choice of receivers wins it for me.

  • @RCRacingLegends

    @RCRacingLegends

    2 жыл бұрын

    I know what you mean, it was a tough decision for me too. But I went with this one because of exactly what you said: range and voltage telemetry.

  • @donmichaelcorbin4417

    @donmichaelcorbin4417

    2 жыл бұрын

    @@MrYoohootuber I ended up with both the RC6GS and the GT5 (it came with my Redcat Gen8 AXE) and although I like the design and build quality of the GT5, the RC6GS has so many more functions, far greater range, and cheaper receivers too. I really wish RadioLink would update their transmitter design, though.

  • @josephcassidy1211

    @josephcassidy1211

    Жыл бұрын

    @@donmichaelcorbin4417 I have this and the futaba t4pm and find them very comparable!

  • @dalehess6265
    @dalehess62652 жыл бұрын

    I was going to use mine for a sailboat. Do I need a ESC to power it up? I get no lights when I put a battery on it. does the light only power up when you turn the ESC switch on?

  • @RCRacingLegends

    @RCRacingLegends

    2 жыл бұрын

    Yes, you need an ESC I order to power up the receiver itself.

  • @dalehess6265

    @dalehess6265

    2 жыл бұрын

    @@RCRacingLegends Thank you for your quick response. Thank you for the video as well.

  • @FORD150-5.4

    @FORD150-5.4

    Жыл бұрын

    ​@@RCRacingLegends my receiver don't bind I don't use the telemetry connector maybe that the reason is not bind ? The receiver flashing to many color red ,blue,green? I am confusing?

  • @donmichaelcorbin4417
    @donmichaelcorbin44172 жыл бұрын

    Thanks, great video! I have a question, though. Would you happen to have a brother named "Tony"?

  • @RCRacingLegends

    @RCRacingLegends

    2 жыл бұрын

    I do not have a brother named Tony.

  • @donmichaelcorbin4417

    @donmichaelcorbin4417

    2 жыл бұрын

    @@RCRacingLegends I was listening to your video while working and instantly thought how cool it was that the guy from "This Old Tony" was in to RC's. Uncanny how similar you two sound. I appreciate the help with the binding. New subscriber.

  • @RCRacingLegends

    @RCRacingLegends

    2 жыл бұрын

    I love This Old Tony! His videos are fantastic!! But I'm nowhere near as funny as he is...at least, not on video...lol!! Glad you found the video helpful and thanks for the sub!

Келесі