A lot of you guys wondering how I fit 1 1/8 steering tube to the frame. The frame has a 34mm headtube, and your eye has been tricked by the 1 1/8 thread type fork of this bike. Not all thread type fork has a standard size so NO HEADTUBE CONVERSION happened here. You may see the image link below with regards to the size of the old thread type fork I replaced. imgur.com/a/KIU0TyM

@jaegerists2172

2 жыл бұрын

boss pwede ba magpa restore and customize ng mtb sa inyo? saan po kayo located?

@kokokruntss

2 жыл бұрын

boss same size lang ba yan, sa headtube ng japanese bike?

@v1ru5gam1ng8

2 жыл бұрын

Where I can buy all this part? Can you share it?

@ryanrearick5843

2 жыл бұрын

So the frame fit modern a modern 1 1/8 fork? What fork did you end up using? I've been dying to replace my '96 Avalanche's original Indy fork.

@chowder4196

2 жыл бұрын

Boss ayos lang braking power ng ztto na brakeset na kinabit nyo?

This isn't bike restoration, this is dream bike build

@wolfcloud8735

2 жыл бұрын

Bit of both

@louloup4607

Жыл бұрын

wel I guess we dont all have the same dreams.. or maybe I'm on the wrong drug. what type of drug do you use you, gravel guys?

@riccardoraffaele5479

Жыл бұрын

@@louloup4607 ahahahah ok, I'm an mtb guy too but I liked this bike a lot And love the fact that before it was just an old bike but him restored it well

@louloup4607

Жыл бұрын

@@riccardoraffaele5479 ye the old frame have style for sure :)

@jneptune1540

Жыл бұрын

Lol. Right. Clean the frame and all new components. Lol

So many other videos say "restoration" and they just take a dusty old bike, clean it and service it. THIS is a restoration. Top work man.

@CoggieBike

2 жыл бұрын

Thank you!!!

@tubularmonkeymaniac

Жыл бұрын

Yeh I was initially skeptical, but that is a legitimate rusty old bike, look at the pitting. Great effort.

OMG,man, that's impressive! I love it!! ❤️ hope someday I can build A dream mountain bike for myself just like what you did.

What a labor of love! I'm really glad there are more people who share my love for the GT heritage. The Avalanche was my first bike and it was legendary!

Excellent restoration! I actually prefer watching these types of bike builds over all the new fancy stuff

@CoggieBike

2 жыл бұрын

Thank you for your support

@johnsonjay60

2 жыл бұрын

Same!

@cobbieplayzrr5217

2 жыл бұрын

Sameee

@theelbcoast2242

2 жыл бұрын

Fully agree (on steel hardtail re-builds) 👍🤘😊

@bdawinton

2 жыл бұрын

Shame they will go blind soon if they keep welding without proper protection.

This is like the perfect bike for me , the colors and everything about this is just amazing

This is the definition of Pimping a bike out. What an upgrade! 👌

The perfect colour combination... I never knew what my ideal bike looked like until now

Oh this is some great renovation, can't even imagine how happy the owner is when he sees his thrashed bicycle turn into a shredding monster! New Subscriber From Baguio City Philippines.

@CoggieBike

2 жыл бұрын

Wow! Thank you idol!

@drope1198

2 жыл бұрын

Haha, in Brazil, your name's city means a bad language

@Wolf_Entity

3 ай бұрын

​​@@drope1198 Wrong, it is much like saying "Thing" in a different way

Holy Crap!! I had an Avalanche circa 1991 with a Marzocchi fork. One of my favorite rides of all time. Thanks for the walk down memory lane!

@CoggieBike

2 жыл бұрын

Our pleasure!

I like how the bike straight up looks like a newly released bike with modern parts instead of restored bike with the upgrade. Top notch.

This is the fourth time i see this video, gosh, the details, the music, all the hard work to come back to life this beauty.

Nice work Coggie. Im very pleased to see another old bike back to life. Great to see that you press bearings in to head instead hmmering them ;-) I have some advice for you: 1. Use rust inhibitor before painting. 2. Try avoid to use filler (beter to play with primer only if rust marks are not too deep.More work but better results in long shot) 3. When welding with electrode try to place one continous bead instead of short tack welds. 4. Hide your stickers under clearcote that way they last longer.

@CoggieBike

2 жыл бұрын

More to come!

Wow, that was simply remarkable!. A transformation indeed. Just shows what can be done, throw nothing out!. 🙂✌🏻

@CoggieBike

2 жыл бұрын

Thank you so much!

Fantastic job!! Wow!! Incredible transformation, you did a really nice job. And it is actually fully functional.

An impeccable job, satisfying and relaxing to see, it seems like magic, greetings! 🚲🔥

@poplaurentiu4148

Жыл бұрын

Yeah.. we can see the true passion transforming an old rusty GT into a special theme Gravel bike woaaw.. for the last 3 years i have see few assembly of new dream bikes build but this was an absolute treat and unique since we don't see very often such old bikes transformed like this.. freacking Epic..

@CoggieBike

Жыл бұрын

Thank you very much!

That’s an amazing piece of work, skilled restoration at it’s very best, I’m sending over my mountain bike for you to work on when it gets a bit old & tired!! Cracking job 👍🏻

@CoggieBike

2 жыл бұрын

Please do!

Super enjoy watching this video, amazing job to see an old rusty bike springs back to life 🤩

@CoggieBike

2 жыл бұрын

Thank you so much!

I'm so glad to know that any bike can be converted to have a disk brake system with a welder and grinder ❤

@lanthan598

Жыл бұрын

and a fuck ton of experience at welding else you're gonna ruin the frame or the brakes or both

@shoopdawooplazars

Жыл бұрын

@@lanthan598 idk about a fuck ton of welding experience lol, those were pretty amateur welds. im sure with a day of practice anyone could lay down those tacs

@lanthan598

Жыл бұрын

@@shoopdawooplazars that was my point, his welds are horrible and the bike is probably worse off than when it started.

First vid I watched from your works and damn the creativity and hardwork into this is amazing

These videos gives me confidence that I need not sell my old first bike. Instead make something like this. Great job mate!

@CoggieBike

2 жыл бұрын

Thank you!!!

You are an absolute unit doing all that... Great build!

@CoggieBike

2 жыл бұрын

Thank you!!!

I had a 1994 GT Talera in purple rain paint. I kept it in mint condition and sold it to a good friend about 5 years ago. He uses it almost daily . Great geometry on these old bikes.

iba talaga pag kumpleto sa gamit, sobrang ganda ng result at nabigyan ng 2nd life yung bike 😀

WoW 😱it's a very good job, it turned out great, I've enjoyed watching the montage, you're a machine, greetings from Spain, Mallorca 👏👏

@CoggieBike

2 жыл бұрын

Thank you!!! Greetings from Philippines!

@packohub1145

Жыл бұрын

Muchos Gracias..

I had a orange GT avalanche, probably a 1991 or 1992. Killer bike for it's time. Great restoration!

@CoggieBike

2 жыл бұрын

Thank you so much!

@meatfish6346

Жыл бұрын

Wouldn't be 91 or 92 as there were both white and black - 91 was thin black stripes on white and 92 more of a series of black splodges on white (a 91 was my first real MTB!)

Love the attention to detail and upgrades. Turned a bucket of rust into something amazing. Excellent work

@CoggieBike

Жыл бұрын

Glad you like it

@iqhaider507

Жыл бұрын

​@@CoggieBike please whats the name of the handlebar

The Rear Derailleur painting is killing me and the deore decal at the end was like boom in my brain man. Awesome build.

Amazing dude. Seriously amazing. You got very lucky with the stem, seat post and BB extraction.

@CoggieBike

2 жыл бұрын

Glad you enjoyed it!

Amazing job. The selection of accessories in purple is perfect. Conversion to disc brakes done great. Perfect project.

@CoggieBike

2 жыл бұрын

Glad you like it!

omg the GT Avalanche was my very first bike that I ever bought for myself 20 years ago. this gives me SO MUCH JOY

disfrute cada momento de la restauración gran trabajo y muy impresionante

I have seen lots of restoration video's, this one is the best. Hats off. Nice work. loved it.

@CoggieBike

2 жыл бұрын

Wow, thank you!

@aribthesoldiers3977

Жыл бұрын

@@CoggieBike how much price it will take

Incredible restoration build! I'm Definitely gonna use that color theme for my Gravel Bike.

@CoggieBike

2 жыл бұрын

Glad you like it!

Trabalho incrível meus parabéns você é demais

Great job restoring what most people would throw away. Kudos to you, and keep up the good work.

@sizquirt

5 ай бұрын

it was not a restoration, more like a bike build

Excelente restauración, me fascinó el video. Sigan así siempre. Saludos desde Paraguay. 🇵🇾

@pablosendra5961

3 ай бұрын

❤

Dude! Nice work! This was a great video. As long as you have a great old frame to begin with, makes a super fun resto! TJ in ColoRADo USA

I used to have the same model as my first MTB. I rode it at my first Fat Tire MTB week at Crested Butte when I got back from Desert Storm. Now I wished that I would have kept it. Your work is inspiring, thank you for sharing.

ayos boss dami ko natutunan pati mga need kong tools alam ko narin....then ung threaded type fork pala pwedeng ireplace sya ng threadless.... thanks po for this vid

This is definitely cool I think one of the key features in this video is the addition of disc brakes with a welder

@CoggieBike

2 жыл бұрын

Thank you so much!

@Sc0rp83

Жыл бұрын

Doesn't have much choice when bike frame doesn't have disc brake mount supports?

Nice job . There's magic in bringing something back to life .

@CoggieBike

2 жыл бұрын

Thank you!!!

Beautiful work! I have a frame from a GT Outpost Trail that I've been trying to give this same kind of love to, but it's been sitting in my garage for years.

Dang, I'm a beginner so I don't know how good of a job this is. But judging from the comments, you did an amazing job. Congrats!

@CoggieBike

2 жыл бұрын

Thank you!!!

Great job. Next time, you could get the frame sandblasted. It will be faster and easier. I did that with an old frame and it got rid of rust completely in few minutes.

@genesisjulian9524

2 жыл бұрын

Here in Philippines sandblaster is kinda expensive, and having angle grinder is an alternative..

@vvolker2799

2 жыл бұрын

Sandblasting "steals" alot of material too, especially on older frames it wouldnt be so good for the material.

@jimdent351

2 жыл бұрын

@@genesisjulian9524 What about some kind of acid? A lot of people don't realize that acid will strip paint, rust, and grease. I use Muriatic Acid to clean old rusty automobile parts, but It's my understanding that Phosphoric Acid works well too. In Canada here, Muriatic acid is easy to come by because it's used to clean swimming pools. Just don't get it on your skin or breath the fumes.

@unknownph537

2 жыл бұрын

Sorry we dont do that here plus its kinda EXPENSIVE unlike you living in the west and here in the Philippines we do it Manualy not Automatically

@pinoyekis

2 жыл бұрын

First-world comment 😄

Nice transformation 🙌🏾‼️ That color scheme is DOPE.

@CoggieBike

2 жыл бұрын

Appreciate it

This video deserves tons of likes. You are awesome by giving this bike a second life 👍

@CoggieBike

Жыл бұрын

Glad you liked it!!

This is everything , very professional , love the details your a legend , wish i could bring you my road bike

@CoggieBike

2 жыл бұрын

Thank you!!!

Lovely build. Fantastic attention to detail. Brilliant

@CoggieBike

2 жыл бұрын

Thank you so much!

thats another level of beauty for a bike , the frame part is unique and simple, but the chain and the another vibrant purple parts make it looks fantastic, i a min love with it, fantanstic!

@CoggieBike

2 жыл бұрын

Glad you like it!

Upgrade na may kunting bike. Pero legit napakaganda ng concept🔥

Excelente 💕 Ótima imaginação e restauração, as cores combinaram perfeitamente, se uma pessoa olha nem imagina como estava antes🤩🤩

@CoggieBike

2 жыл бұрын

Obrigada!!!

Ficou incrível, muito bonita essa bicicleta. A restauração ficou perfeita.

Congratulations! What an amazing restoration work! I have never seen the use of MTB shifters and brakes on a gravel handlebar!

@CoggieBike

Жыл бұрын

Thank you very much!

Incrível !!!!!! essa ficou linda demais Parabéns.

Do lixo ao luxo 😉 Ficou muito bonita a renovação dessa bike ai 😉👍

@CoggieBike

2 жыл бұрын

Obrigado irmão!

That bb came out a lot easier than I thought it would considering the state of the bike!

@CoggieBike

2 жыл бұрын

Yes, i'm really surprised it didn't bother me to remove that BB. I guess the old grease still intact

@bluntforcetraumaproduction4567

2 жыл бұрын

@@CoggieBike WHAT BRAND OF SADDLE IS THAT?

@rqteqobzrvr3592

2 жыл бұрын

Absolutely agree… I have a late 80’s, early 90’s GT all terra and the BB was a major pain to get off…

Хорошая работа бро! Много труда было вложено в рестоврацию. Велосипед получился просто сказка!

Ang ganda! Kulay freeza, nakaka inspired yung color combination.

On one side, there are unprofesional tools ( no welding helmet ) on the other, proffesional tools, ( Pedal puller, new parts, Dremmel tool ( small sander )) And the result is stunning, better than many expensive bikes nowadays.

@CoggieBike

2 жыл бұрын

Thanks for the info!

Wow I was amazed by how well preserved the square taper spindle was 1:35

@CoggieBike

2 жыл бұрын

Thank you so much!

the quality of frame is good enough to restore it, nice.

It's amazing how these videos help me de-stress, thank you very much (:

So beautiful! I wonder, how easy is braking and shifting gears on that bike. Trying to get older used bike for my lady and she kinda fell in love with my gravel, which are hard to come by in decent price compared to older bikes.

@CoggieBike

2 жыл бұрын

Thank you!!!

Very nice restoration 👍. Here in the UK far too many bikes are thrown away instead of being restored.

@CoggieBike

2 жыл бұрын

Cool, thanks

Galing mo master. Ganyan din gamit kong bike ngayon, kaya lang luma pa rin, hindi ako marunong magpaganda kagaya nyan. Salute sayo master! Goodjob👍

@CoggieBike

2 жыл бұрын

Salamat idol!

@parengchev238

7 ай бұрын

Bka gs2 mo bilhin gt ko idol? Send ko sayo pic kung interesado ka. Tnx

Beautiful build. I loved watching it.

Top demais , perfeito ! 👉🇧🇷👏👏👏.

You should start providing links to all the parts you install. Would be really nice.

@jeanutile7109

8 ай бұрын

More on the restoration products used. Could be really nice.

Buena restauración y video. Te felicito por tu trabajo. Es genuino y con pasio y eso lo hace mejor. Buscaba una restauración clásica pero tu video y el trabajo con pasión me gusto. Saludos desde Chile

Nice work, you took a piece of scrap metal and turned it into a thing of beauty! One critique.. the one by system doesn’t do it for me.. it’s hilly where I ride and I often find I need a bailout gear after a long ride. I hope this video gets a million views! Really well done!

@Coggie Bike never disappoints. 🐶🚲💯

@CoggieBike

2 жыл бұрын

Thank you Chickecnjoy, now I'm hungry 😆

Very well done and entertaining restoration video. I have also refurbished old bikes several times, but then mostly consistently replaced all parts. Therefore, I found it great that you have given the rear derailleur again a chance. The bike has become really great. One question I have, what kind of handlebar is that? Manufacturer, model or designation? I have never seen this handlebar. lg Armin

@mireia3208

Жыл бұрын

knock off of the surly corner bar it seems

I've never been this patient to watch a KZread video, I'm glad it was worth it..... interesting!.

@CoggieBike

2 жыл бұрын

Thank you!!!

This has to be the most satisfying restoration I've ever seennnnn

@CoggieBike

2 жыл бұрын

Thanks!!!

It is not a bicycle renovation, but its building. Only the frame is renewed, the rest of the parts are different. Overall it turned out nice. P.S. This is not rock shox :D

Brilliant work buddy. The bike looks incredible!! 👍👍

@CoggieBike

2 жыл бұрын

Thank you! Cheers!

i have never watched someone weld a disc conversion before ⭐⭐👍👍kool

I'd have gone a slightly different direction with the component spec personally. But I can't deny the work and quality of the restoration of that tired old frame. Really nice job. 🍻

@jase6709

Жыл бұрын

Nothing wrong with Amazon spec 😏

@CoggieBike

Жыл бұрын

Right on

Amazing restoration, congratulations! A question: what brand of saddle have you used? Thanks

@CoggieBike

2 жыл бұрын

It's a generic saddle & I painted it with purple

parabens!!! ficou linda a biker 👏👏👏👏👏👏👏👏👏👏

@CoggieBike

2 жыл бұрын

Obrigado irmão!

viewed this video again . you have magnificent mechanical engineering skills. this video relaxes us . thanks

grabe sir, pag sinearch ang "gravel bike" sa youtube, at finilter by "most views" or "view count", ikaw ang may pinaka maraming views at 3.2million :) Congrats po! 😀

Excelente video!! Puedes decirme de donde conseguiste el adaptadpr de freno de disco trasero?? Quiero hacer la misma adaptación en mi bicicleta. Gracias

@alukardka

2 жыл бұрын

hay muchos en amazon o mercado libre , esos tienen abrazadera para no soldar , pero igualmente puedes soldarlos si puedes o quieres

Great restoration, bro! 😀

@CoggieBike

2 жыл бұрын

Thank you so much!

Buti na lang napanood ko to gt avalance pala mi nakasabit pa akong dalawa nian balak ko tuloy ikalakak ...mtb na ksi nauso pwede pa pala irestore salamat sa vedio...na to...

I'm impressed that all these purple parts from different manufacturers got the same color tone.

@CoggieBike

2 жыл бұрын

Thank you!!!

Просто супер, одно наслаждение смотреть !!!!!!!!!!

@CoggieBike

2 жыл бұрын

Спасибо!!!

Não consegui ver direito, mas parece que a fita de guidão está colocada errada, a força que faz contra ela ergue as bordas e se desgasta mais rapidamente.

❤❤❤❤ esto trae tantos recuerdos, cuando nos mudamos de ciudad y no oude traer mi bicicleta en vez de comprarme una nueva mi papá recogio una que iban a desechar y juntos la reparamos hasta el dia de hoy me acuerdo de las horas que pasamos limpiando y reparandola y ouedo conformar que luego de 15 años( tengo 25 y todo fue cuando tenia 10) aun funciona se la regalamos a una vecina cuando me quedo chica.

You just earned another subscriber dude. You're awesome at this

@CoggieBike

Жыл бұрын

Welcome aboard!

Fajna renowacja! Naprawdę wsadziłeś dobry i drogi osprzęt bo nie spodziewałem się rockshox ani przerzutki deore

This is the best I’ve seen on KZread. Even old shovel

@CoggieBike

2 жыл бұрын

Thank you!!!

I love and enjoy bikes.. This is excellent handcraft, pure magic.. From Colorado, the mountain bike capital of USA.. 😂😎🇺🇸

Another solid and satisfying restoration! ❤️ Looking forward for more restorations

@CoggieBike

2 жыл бұрын

Maraming salamat po!

Cleanest transformation that should be proud of

@CoggieBike

2 жыл бұрын

Thank you!!!!

That’s a sick restoration 👍🏼just got a new subscriber

i really enjoyed that ragusa bar. it really makes her diferent and sporty 5 starts restoration

Muito top, aonde compro esse guidão?🤜🏽🚴🤛🏽

@CoggieBike

2 жыл бұрын

Obrigado! eu comprei pela internet

@johnashley4529

2 жыл бұрын

I’m