You're going to have to activate each magnetron sequentially, one at a time. The peak draw is killing the generator

@salsh4937

Ай бұрын

he needs an inverter for this to turn on the magnetron

@Kris-fd9xs

Ай бұрын

Why a microwave?? Microwave dinners go packed in plastic inside microwaves.. How is that going to be efficient to melt plastic???

@Kris-fd9xs

Ай бұрын

I do remember now that he adds carbon for the microwaves to interact with the plastics but still.. Seems like there would be terrible hotspots everywhere which might account for the low yields.. If you're going to "re-distill" stuff your gonna want to have fine-grained control over the temperature or you'll end up with polymerized crap/ a lot of carbon for your next run..

@Kris-fd9xs

Ай бұрын

Saw him talk about the amount of kw/h it takes too in a video were a girl was driving on his plasti-diesel. I'd run it off the produced gas or something.. there's already energy inside.. All these "green" efforts that take a ton of energy input make zero sense to me.. I do agree that having tons of plastic laying around everywhere doesn't make a lot of sense either but simply fractionally distilling it and catching clean fractions which can be used as normal (thinner etc) makes more sense. Gasoline is just a combination of those products too..

@ifv2089

Ай бұрын

Should just make a normal fire, gasification of plastic maybe ❤

can you do a video where you do the maths with energy input and output and everything? And also a new video explaining how exactly everything works would be great! We can help you optimize and you can have some third opinions on stuff that could maybe be done more efficiently!

@demboisbrainless

Ай бұрын

Never Underestimate the power of ordinary people to make a Difference

@IAmTherefore...

Ай бұрын

Yes please the math's

@MRdeLaat

Ай бұрын

yes more matheses

@SpartacusMaximusEsq

Ай бұрын

We do the math he does the meth

@SethHixie

Ай бұрын

He probably hasn't done it yet because pyrolysis is horribly inefficient. That's why most waste companies don't bother.

You should get the gas analysed to have an idea of what you are getting from it. A quick search led me to a paper titled "Gaseous products from primary reactions of fast plastic pyrolysis" which states: "The main gaseous compounds from LDPE were butane, 1-pentane and 1-hexene. PP pyrolysis gave propene, pentane and 2,4-dimethyl-1-heptene as the main gaseous compounds. Styrene monomer was the dominant gas from PS." So, you are probably getting a hell of a mix into your genny, which it's probably not tuned to take and may be the source of the knocking.

@MindsMouth

Ай бұрын

Hexane, Butane, methane from some organic carbon. The catalysts make a big impact on the product. His best bet is to experiment and look into past research to figure out which catalyst will produce the most usable form of gas for the generator to run off of. The catalyst for optimal liquid fuel production differs between plastic source material. 🤓👌

@Misack8

Ай бұрын

@@MindsMouth Didn't knew that the catalyst could change the out going gas composition, but it makes sense. I assume or man here is not using catalysts. But I think I have seen somewhere about a knew catalyst that lowers the pyrolysis temperature so that it requires less energy input, which could benefit greatly his experiments.

@MindsMouth

Ай бұрын

@@Misack8 Currently he can experiment with these catalysts : Salt, Wood Ash, Carbon, Baking Soda. If he reads these comments. Lol

@karelrysavy334

Ай бұрын

the trick is to mix the pyrolysis oil with ideally E85 fuel or regular gasoline in the correct ratio to create fuel with properties very close to diesel ;-)

@Jv19979

Ай бұрын

It's knocking because he needs a hotter spark plug no enough octane.

This is so OUTSTANDING. I've got no words, it's just amazing

you would want to adjust the air/fuel mixture, you might also need to get a really high end spark plug that gives a really healthy spark, most spark plugs are designed for the explosivness of gas/propane. I feel the spark will make the biggest difference,. This will increase power consumption.

Never Underestimate the power of ordinary people to make a difference.

@BLACKOPS1499

Ай бұрын

idk if he is "ordinary". Quite extraordinary imo

@kp5518

Ай бұрын

Power of fake 😂😅

@demboisbrainless

Ай бұрын

@kp5518 it's possible sir theirs evidence plus we don't recycle plastic in FL anymore...

@R1p_whatshouldido

Ай бұрын

​@@kp5518 bro you can't even do this

@corbinclark1770

Ай бұрын

@@kp5518 it’s a real technology just look up pyrolysis the reason it’s not used is because of how inefficient it is

When it comes to the engine knock in generator there is one thing you gotta consider. Ethanol is used in racing for reducing the fuel temperature thus reducing engine knock. Same goes for water (new sport BMW's used that I believe). Overall - cooling down the fuel mixture or engine itself may help

Bro been on this for YEARS, and still has cats in the comments talking about "where's your math?" and "it's not real"... Haha WHAT?!?! Keep up the great work, young man.

@EnviousMods

Ай бұрын

The math is clear. It's innaficiant and the byproduct is horrible for the environment without running scrubbers

have you got the reactor chamber tuned? if you have destructive phase alignment between the magnotron outputs, you may be reducing your power output. if you have them all phase aligned then all the devices run in convergance. also the dimensions of your chamber is important. The microwave enclosure size is tuned to the wavelength of the microwaves. the dimensions of your chamber, and the positioning of the magnotrons really matters. Love your work brother. Your project is really cool.

You are a genius! Great work. Can't wait for the measurements. Thank you fir sharing.

Top work buddy! Big big shouts from Germany

I found this channel at the perfect time. that was an insane run.

idk why but this man talking nerd language gives me hope in humanity for some reason....

@eufrozinak9461

Ай бұрын

we need to do our part too, any way we can. there's a lot of power in community organizing, too. seek out your local activist groups and please get involved.

@wolf_cub2430

Ай бұрын

Bro he’s turning plastic into natural resources that could he used to save the planet from plastic pollution.

Just making sure that this guy is still alive👀

Incredible work.

You know how when you turn a diesel fuel engine to run on bio and you have to make changes … maybe it might be the same as the oil might be a little more corrosive, but I’m sure the adjustment is not gonna be a problem for you. Ps you are awesome!

my man you need an invertor for a smooth start of these magnetron and turn them on one by one this way you can keep your generator good and it will take that load.....be safe you an inspiration and a doer and risk taker not just loke half million theorist guys you are an inspiration . a well wisher from Pakistan

@Kris-fd9xs

Ай бұрын

Why magnetrons at all?

@ifv2089

Ай бұрын

​@@Kris-fd9xsexactly 🔥

It’s actually fun watching you! It’s like we really be living in a game world like borderlands

This is awesome! Keep it up 💪

man it’s great to see what bright minds are innovating for the sole purpose of a similarly bright future

Keep your self safe

This is so cool! Lord i pray you protect and bless this man

Get you some kind of muffler or baffle for that generator. A battery 🔋 inline might be helpful to. Big capacitor to share the load ya know

You should be able to run two 120v microwave transformers in series off of a 240v supply. Each will drop 120 volts. I've done that when using them to make spot welders.

Lol i love how proud he is that his creation is successfully collecting trash 😂😂 A true engineer at heart

This is incredibly interesting.

Keep it up man!

Bro is gonna bave a bounty over his head soon😭

and I *think* if you were to add an air passthrough to the loading mechanism, it would work, the problem was that it resealed the vaccum with the particles, but if there was a small airway for air to enter or exit (inside of the chamber) to the top of the plastic container. Essentially just put a straw on the inside of the tube to keep it from resealing the vaccum. Checks out in my head atleast.

what is the blue hose connected to the bodi near the condesner it looks like compressor has blue hoses for knife valves is it vacuum or pressure and is the vacuum onli connected at the at the natural gas output? would pressurizing the input chamber help push the plastic carbon mix through or could vacuuming it before opening the valves help prevent compaction since equal pressures? i was confused whi the pressure difference didnt work for pulling the plastic into the reactor

I’m curious do you use any plastic or only 1 specific plastic because each plastic gives of a different gas maybe the mixtures of certain plastics is causing the engine to knock

Wow I subbed at 60k. This is growing fast

Fact: If you dont leave a like and comment, then this guy will never be found by someone who can take him further. Lets bend the algorithm in his favor.

I have a generator runs on gas or propane you could probably use the natural gas to run the generator while the generator runs the machine plus get your oil in the process possibly increasing overall efficiency

Keep it up 👑 king

I'd love to see calculations on what type of gasses it emits and how toxic or dangerous are they

I encourage you to look into ways to purify your yields so that you don’t have the impurities that is choking up your generator which will destroy it sooner than later with all the build up. Also instead of moving the material down a straight line what about like a tumbling motion like a dryer barrel. That will decrease the amount of magnetrons needed.

If your getting a substantial percentage of Water in liquid phase in the oil, the room for improvement is very substantial.

For around 5 min mark about the power do u need a (ballasts????

I believe if you mixed something like used motor oil into the mixture gravity I believe will then push it down. Used oil would also boost production I believe not only does it have the fuel in it but also tiny pieces of steel.

Couldnt you run the magnetrons off your home electricity and the generator at the same time. Like 5 on the generator and the rest on home?

Ow my what a horribly badass machine 😊love it although for a 2.5 hours running gasoline en getting 0.3l flameble liquid 😅 seems a little short

Can you split the loads... 5 mags on one leg and the other 5 on the other leg? Where are you located?

You need to convert the nozzle on your generator. The orifice is smaller on propane vs natural gas is bigger may want to look at that. Which in turn you use more natural gas to make explosive vs propane.

What is your long-term goal for this project

That is fucking crazy to see that much oil

Can u tell me if the magnetron radiations are dangerous?? Cause the work is an absolute beast😂

How does he build all this and know nothing about electricity? He doesn't even know the generator Amp rating? Show me the circuit board you built that runs the whole operation. What is the generator even plugged into?

Does you have any videos on how to build this our selves?

@plasticbudgie

Ай бұрын

This technology is widley known and has been for many years, theres plenty of information.

JE SUIS FRANCAIS JE SOUHAITE ACHETER TON PRODUIT

The Engine will require alot more air to run a decent AFR for on the Syngas 14.7:1 on gasoline closer to 1:1 on wood syngas i imagine your plastic syngas uncracked would be better than organic feedstocks. You also need a filter for the gas going into the engine, Activated carbon or gaswash type system even both depending on tar content. I have worked for a company that has been trying to crack the commercial pyrolysis market for the last 15years you microwave approach is interesting but ide like to see a proper enegry mass balance on your setup. Please be mindful of your health when working with this machine, Benezne carbon monoxide etc. Are terrible for your health and trust me oxygen ingress into the reactor especially the cooler zones can make some pretty big bangs. Keep up the good work great content 👏

You should get solar panels for backup battery for your machines \

could you make the plastic more coarse so it doesnt stick together?

@MindsMouth

Ай бұрын

He needs to grind the plastic less, the fine plastic is ultra light weight and susceptible to static electricity cling.

would filtering the gas make it run cleaner?? 2:12

Did you go to that company that I told you about that will fund your project

lol sorry for spamming your comments, I just keep having ideas. Would love to see how clean that gas burns, from plastic you would expect it to burn like black but it looks clean. idk how to measure the quality of the burn off of a gas tho.

Have you tried to run an engine on this fuel??

It’s like kang the conqueror came back from the future lmao

Does it not rain there 😅

You should reach out to someone for funding

What if you just create your own generator that is best for your machine

Try condensing the gas into a fuel cell if possible to run the generator

Nobody else see a problem with him using 10000 watts for less than a gallon of gas?

who are you going to sell the crude oil to?

@MindsMouth

Ай бұрын

Shhhhhhhh 😠

your doing awesome creating cool videos. all that oils is coming from all the comments with people made up wit sub partly carbon lol

You should get a 220 watt solar generator

When you building a de lorien 😮 this is sick bro. Keep it up

Pls add solar panels to do it more eco friendly

is this project open source?

A typical 10kw generator runs at 6000-7000 watts full time. 10kw only long enough to start a load

Dude you gotta get on shark tank with it

Now you're talking. I figured the machine was bogging down from the gas it's making being kinda dirty.Some butane running heaters have a filter in between the unit and the butane. And that's commercial butane. You probably could get by using some sort of filter. But even with the best filtration, a generator like that won't last long running it off that fuel. Saying that,you've really impressed anyone with a working brain. You ran the generator off your own product🎉. You're in such a great position because you have so much knowledge about this, and you have thousands putting in their 2 cents as far as how it's working.

I told you to manufacture an internal screw like in a pellet wood stove

Wow he "discovered" pyrolysis xD

Did bro actually not correlate the direct correlation between wattage and amperage.... That's crazy

Try getting a patent for your reactor mark 4.5

Your natural gases octane might be to high for the motor don’t let it keep knocking ur gonna melt the piston

@Failandy

Ай бұрын

Likely too low, rather than burning evenly it's detonating. Most small engines like 90 octane

Just invest in WPU stocks. They do the same but in massive scale

DID YOU SAY OIL!!!!!🦅🦅🦅🦅🦅

You need a team behind you to jatd to do alone

You need to be safe bro they gonna come after you, the two men in suits, beaware of them allways. Check your house and dont go by youre self out in. The public is with someone

You couldve just hooked up the microwave transformers as 4 pairs of 2 in series, off 220V. No need to buy anything new.

Magnetrons are optimised for heating water, not plastic, this should be obvious when looking at a microwave dinner.. Why use microwave for thermal source??

i hope to god you have put in the copy right claims for it in

LNG liquid gas for generator

be careful the gov watching

@MindsMouth

Ай бұрын

The ONLY people who will bother him are the climate activists.

I wonder what your neighbors think 😂

Video ain't got audio

@X100People

Ай бұрын

i think its on your end. played well for me

@Misack8

Ай бұрын

My audio is fine. It's your end, m8

@Fearth3nob

Ай бұрын

@@X100People yeah might've been youtube ends tbh cause i made the comment after 1 minute the video was uploaded

give bro goverment funding and we got ourself enewable fuel, alos please release the damn blueprints before the big oil companys will be jealous

I hope the government doesn't get him

generator

You need to do a bypass survey as well as usage to final usable product. My rough math says you're eating more power to gas expense than it's worth. A,so the majority of microplastics are not recoverable. I find your journey noble but your paying well more than your making. Also are you measuring off gasing and environmental impact. Heating or burning plastic eats the ozone. If you don't take the proper precautions the EPA will find and shut you down with possible jail time. I'm saying this for your benafit.

get in touch with some other scientists before any .... agency , gets you bro

@plasticbudgie

Ай бұрын

This information has been known for years its not an issue

@alaskanredneck7930

Ай бұрын

@@plasticbudgieyeah but i imagine if people start to try to streamline this big oil won’t be happy.

Becareful oil companies sees this and knows itll be be their downfall

Why is he using a generator? He needs a small nuclear reactor to power that machine. He needs a $100 mil investment. Please send donations.

Plastics were extracted from oil so they are already fuel but your contraption will never be efficient enough.And one more important note is that it's highly toxic for the enviroment as the toxin come into the fuel itself.

If this guy finds a EFFICIENT form of pyroalisis and patents it he'll be rich

You need fuel injection. You can't run the engine efficiently like gasoline.

@MindsMouth

Ай бұрын

It's natural gas and gasoline powered. He's using the gas byproduct to run the generator

@edwardarruda7215

Ай бұрын

@MindsMouth you can't burn a gas efficiently in an engine designed for liquid fuel. It's different stoichiometry.

@MindsMouth

Ай бұрын

@@edwardarruda7215 His generator runs off dual fuel sources, Propane/NG and Gasoline

Open Source this product and change the world dude. How about Pollution? What are you losing in this process?

All these are fake 😂😅

@ruhage

Ай бұрын

Would you mind explaining in detail why you deem plastic pyrolysis videos to be fake ?