Bigger, Badder, Banana Engine Jeep Install!
Автокөліктер мен көлік құралдары
So I got a build project for the Jeep Banana, and it's time to give it a bigger and badder engine!
Rudy’s Thanksgiving eve job, as promised. • Jeep Stuck On 1,000 FT...
Subscribe / @mattsoffroadrecovery
Off Road Recovery Videos
This Is Going To Take The Wrecker. Nasty Camper Rescue!
• This Is Going To Take ...
How Do I Stay In Business? 3 Rescues Like This!
• How Do I Stay In Busin...
Making Room For Bigger Tires On The Jeep Banana!
• Making Room For Bigger...
Nasty Mud Pit Rescue, Stuck All Night & Buried To Frame!
• Nasty Mud Pit Rescue, ...
This Work Load Is Testing The Reliability Of The Morrvair
• This Work Load Is Test...
Oh No! Ford Goes Too Fast Into A Massive Ditch!
• Oh No! Ford Goes Too F...
Are We Really Going To Pull This Dead Jeep Up There?!
• Are We Really Going To...
Matt's Off Road shirts, hats, hoodies, keychains and stickers!
www.mattsoffroadrecovery.com
Matt’s rope of choice 30
Matt's Recovery Rope by Yankum Ropes
www.mattsrecoveryrope.com/
Jeep Cherokee XJ bags, we use ours for first aid.
www.amazon.com/gp/product/B07...
Shop tools!
Milwaukee 2767-22 Fuel High Torque 1/2" Impact Wrench w/ Friction Ring Kit
amzn.to/2qAiRbY
Tires on yellow banana!
Milestar Patagonia M/T Mud-Terrain Radial Tire - 35X12.50R15 113Q
amzn.to/2O8Yafx
Follow us on Facebook!
/ winder-towing-inc-1029...
Follow us on Instagram!
tinyurl.com/y6pkp3mg
Jeep walk around video
• Walk around my XJ
Please like, subscribe, and share!
Thanks for watching, from all of us at Matt's off-road recovery!
Пікірлер: 1 600
A German sitting on a Croatian beach, drinking Italian coffee and watching an American video. Jeez I love our times.
@ubertalldude
2 жыл бұрын
Go jump in!
@markiemerc
2 жыл бұрын
A Australian sitting on a couch, unable to go outside because of lockdown and army telling people to stay inside, watching a great American video
@permagenix
2 жыл бұрын
@@markiemerc Stand up to tyranny.
@18robsmith
2 жыл бұрын
Who said nations couldn't cooperate?
@riverjordan2004
2 жыл бұрын
@@permagenix what are they gonna use ? Spiders ??
Collin, that was some fine parts cleaning work! It's not a glorious part of the job, but it is necessary.
@danedwards3015
2 жыл бұрын
I was thinking the same thing. Nice work Young Man!
@howard7689
2 жыл бұрын
Agreed, now sell them on eBay and call Clifford performance and order new ones more compatible with the new engine.
Matt you’re a great leader. You have a lot of patience and educate your team well when working but you don’t get angry and you somehow manage to run a shop while not being an asshole. Props to you I really see you as a great example of how a team should be run
Finally, after watching your videos for a year, I got the chance to pull someone out of a difficult situation. The things I've learned from watching yall helped and we had them out in no time. Thanks MORR!
"Whoops there goes another harbor freight drill" is the best, truest song ever sung.
@watcherofwatchers
2 жыл бұрын
Both my father and step-father were aircraft machinists. I have thusly acquired a lifetime supply of good quality drill bits of every conceivable size. As a consequence, I own maybe 4 Harbor Freight drill bits (step bits that work great). My drill bit life is good.
@danbrooks8241
2 жыл бұрын
@@watcherofwatchers can't knock the h.f. step bits for their cost
@Rat-Builder
2 жыл бұрын
@@danbrooks8241 I wait until the indexes are on sale, then I buy 4 or 5 of them, and I take all of the bits out of the indexes and store them in a small bin with many drawers. I do buy quality bits from time to time, but for 99% of my drilling, the H/F bits work just fine.
@1paparico
2 жыл бұрын
Whoops therès a lovley press drill/milling machine just there..with a vice...Naw!
@Studio23Media
2 жыл бұрын
@@danbrooks8241 Those HF step bits are legit.
Trevor is the big secret hit of the show , glad you're back in action !
Something tells me that Matt’s whole life has consisted of using the wrong tool the right way to get the job done, and I admire that.
@perryleduc1954
2 жыл бұрын
it also works using the right tool the wrong way
@roygardiner4002
2 жыл бұрын
Americans only seem to possess adjustable spanners (wrenches) must be the lack of 13/32nd spanners.
@markusbroadwater8361
2 жыл бұрын
Haven’t watched every video here but I’ve yet to see that Bridgeport used. Definitely a lost opportunity for it right there. Love the vids, though.
@randallsmerna384
Жыл бұрын
Wouldn't the wrong tool automatically be the wrong way?
I like Matt's approach to designing his vehicles, there is a legendary Latin term for it known as; "Wing Imus Maximus".
I love that Trevor has upped his his game as the camera man and added more heckling from the background
@717UT
2 жыл бұрын
Cameraman heckling is an underappreciated fine art!
I have found Harbor Freight offers Two grades of Drill Bits, Wire - Soft and Extra Brittle.
@18robsmith
2 жыл бұрын
You mean they've stopped selling the "blunt on sale" range now?
@tdkeyes1
2 жыл бұрын
Sharp enough to get you out the door
@waynerainey2606
2 жыл бұрын
Harbor Freight drills are fine, it’s not their fault they don’t make idiot proof drills. Both of those drills that THEY broke would have been just fine if they had them in a drill vise and using a drill press at a low rpm. Also a little cutting fluid helps a lot! Both of those drills can be re ground if any of those knuckleheads knows how.
@ADBBuild
2 жыл бұрын
@@waynerainey2606 I've literally seen a Harbor Freight drill catch in a hole and the twist un-twist and the flutes straighten out. Harbor Freight drills are not fine. lol
@DC-si8xw
2 жыл бұрын
@@waynerainey2606he wrote drill BIT my friend not drill. on that note, they are pricey but I have had great success with there cobalt drill BITS, it's like $75 dollars but they work well.
Plan C: paint Rudy's Jeep with yellow blotches and call it "The Plantain" and send it on the mission
I am absolutely loving this way more casual format with lots of random behind-the-scenes stuff.
Matt: "Who's a good boy" Max: *Not me, I don't get taken along any more...*
@rudiekeyser2495
2 жыл бұрын
Poor Max but still a good friend.
@RJ_Cormac
2 жыл бұрын
Bad Dog!😒🙄 Dangerous making Ed chase down a dog in 95°F+ weather after towing the customer. Need to keep the team cool. Those emergency waters in the Banana used to be for customers who were stuck overnight, not lost doggy rescue. 🤦🏻♂️
@dicktrickle4197
2 жыл бұрын
I love everything about this channel and all involved, but I absolutely could not ride in the back with the dogs panting on me 😂
@PoppiB
2 жыл бұрын
@@dicktrickle4197 what’s wrong with dogs panting and drooling on you in the back seat of an un-air conditioned car in the desert at 98 degrees and 100% humidity?
@Husky1run
2 жыл бұрын
@@dicktrickle4197 will question you now a dog person own a Siberian husky like my wife and we have you ain't have nothing like husky fluff
Watching from Japan, it’s the last thing I do every Sunday night. It ends my weekend on a happy note!
@user-wp1nt9xr9f
2 жыл бұрын
日本語話せますか?
@landrover827
2 жыл бұрын
@@user-wp1nt9xr9f はい。優しい日本語は大丈夫です。
@user-wp1nt9xr9f
2 жыл бұрын
@@landrover827 日本に住んでいる外国人ですか?出身はどこですか?
@landrover827
2 жыл бұрын
@@user-wp1nt9xr9f 私は日本に住むアメリカ人です。
Thank you for the longer vids... Doesn't have to be anything special. You always do more doing than explaining. Thats always a plus. No matter what it's always good to have an inside look in the Matt's offroad recovery GARAGE of custom engineering.😃
Matt appears to be a born teacher. Not only for his crew, but for his audience as well, the way he explains things into the camera, talking directly to us. I see others try, but no one does it as well as Matt! Excellent.
Hey Winder Crew, How can ya not have a good day after watching this video ? This is a really great crew ! Matt has assembled a really fun, energetic, hard working bunch of people who work well with each other and get the job done. It is a pleasure to watch their videos ! Thanks to Matt and crew.
The Taking of the wrench from Rudy at 10:20 was priceless
I got schooled by an old guy when I accidently called a cylinder a ram. The look on his face when he said "a ram is one way and a cylinder is push pull". He was a lift installer by trade and very good at it. Me I was just help learning a lot and aggravating him well. lol Good video !
“Whoops there goes another harbor freight drill” 😂. I laughed entirely too long at that 😆. Also, I’ve really enjoyed watching the Jeep up grade. Keep up the good work crew!
@bane8305
2 жыл бұрын
dont tell me their cheap... i bought a ste of harbor frieght tools and my dad laughed at me saying they cheap 😂😂 it solved like 40+ jobs already and hasnt broke yet!
@kahoycrafts
2 жыл бұрын
When HF has those tool disposal sales, at first I thought they were advertising that their tools were disposable. 😄
This Channel is such “A Trip”!! AN AWESOME group of folks.
@thomasfletcher4765
2 жыл бұрын
I second that !
@waynerainey2606
2 жыл бұрын
You wouldn’t think so if you had a life of your own instead of cheerleading someone else’s. I’m glad I have Adblock installed. I already have to fast forward through so much of the munsters do towing, I’d hate to have to Fast forwArd through a bunch of ads too.
@thomasfletcher4765
2 жыл бұрын
@@waynerainey2606 and yet , here you are , commenting on a channel you just watched 🤣🤣🤣🤣🤣
@Rat-Builder
2 жыл бұрын
@@waynerainey2606 Give me your address, and I will give you a hand getting loose from all of those chains holding you down in front of the screen. From your comment, you MUST have other much more important things to do.
@Rat-Builder
2 жыл бұрын
@@waynerainey2606 I have read several of your comments, and every one of them is in poor taste. The one where you insulted Matt's wife was just uncalled for. You must have a very unhappy life. I disliked every one of your comments. It is a shame that they don't show up.
"Looks" like Matt needs to borrow Paul's eyecrometer for an afternoon. 😜
@thomasfletcher4765
2 жыл бұрын
My thoughts exactly 🤣🤣🤣
I really love this family type work environment! Super dope. Everyone goes to lunch together!? I hope my company can adopt this kind of morale/attitude and find good hearted employees like this.
@richardnowell7082
2 жыл бұрын
Niko
This has quickly become my favorite channel and I love watching what these awesome folks are gonna do next. God bless ya'll! Preciate ya!
You guys should record that song. It was pretty good. In the background just have a track of snapping drill bits, ding included.
Just being 100% honest 🙏 Would love to hang out with you guys around the shop just for one day, and go on a recovery mission. God bless you guys ✌️stay healthy, stay strong 💪 and keep up the great work. ❤️ big fan .. LETS GO CHAMP!!
Matt uses the Wrecker as an engine hoist. It ain't stupid if it works! 🤔
@xmo552
2 жыл бұрын
I've used my wrecker to do body and frame work.
@thereplacementfordisplacement
2 жыл бұрын
Better than an engine hoist except you need at least 2 people. Definitely not a negative thing, it's their trademark enginuity.
@mikemiller3007
2 жыл бұрын
Been there done that. Works great for pulling one if you’re not in the shop
@brianmason8400
2 жыл бұрын
My boss has done that a couple times and is about to do it again for an engine swap in a lifted F250 in our back lot.
"A Stabbing in Hurricane" a new mystery novel from Matt's Off Road Recovery.
@traceylocke8690
2 жыл бұрын
clever, I liked it.
@99jeepxjguy97
2 жыл бұрын
Or it could be a reference to the heritage of the 4.0L ... It was developed from the Hurricane from the Willy's days . . . . Hmmm
Love waking up Sunday mornings to the Banana Build!!! Heading to the “Crawling for a Cure” Cancer Run in Tahuya, WA! Wish y’all were here!!! ❤️🐞
@ironicchannelname6457
2 жыл бұрын
I've always wondered what those events do like do you pay a fee to participate how do they raise money
@hillyinseattle5630
2 жыл бұрын
Should be a great event. Washington has some great crawling spots.
@cjplol6589
2 жыл бұрын
Great work, Bug.
@jilliansadventures4679
2 жыл бұрын
@@ironicchannelname6457 yes, most of those events you pay per trail, plus there are vendor set ups so I'm sure they earn money from the fees for that. I know the two bigger ones at Sand Hollow are like this.
@GoatOffroad
2 жыл бұрын
@@ironicchannelname6457 - The event was free to anyone that wanted to come and go wheeling. We had several companies donate gifts for a raffle we held before we all hit the trail. Was an amazing turnout for our first annual event. Approximately 100 rigs showed up to show support.
Max looks like he would even settle for a toy rabbit at this point.
@likeorasgod
2 жыл бұрын
He's like, "Am I still grounded?"
Glad to see at the end of the day ya got it stabbed in there 😂🍻👍
@ChevTecGroup
2 жыл бұрын
Love your videos Eric! Helped me out quite a few times and your rust prevention treatments are the best
The tie rod end to help stabilize the dual joint steering shaft is genius. Eliminates the common problem of one of the joints binding up
“We’re trying to do a good job” and then cut to Matt beating on stuff with hammer 😂 😆
@jfraz3570
2 жыл бұрын
Claw Hammer at that?
@717UT
2 жыл бұрын
As a carpenter, I have indeed done some mechanic'in with my claw hammer.
@rodneymartin6154
2 жыл бұрын
@@jfraz3570 he explains in another video that claw hammers are preferred for fabrication because you're always prying, tweaking etc.
Hi Matt, Invest in a Drill Doctor. They work great and you can sharpen broken or dull drill bits in minuets and get back to work. No trips to buy more bits. You can sharpen them all the way down to the end of the flute. Saves big time and money!!!
brings back memories from 1970,s. Machining up engine to gearbox adapter sandwich plate . no CAD in those days .. just a compass and some decent eyeballing .
I watch Mike Patey build airplanes in northern Utah and Matt build Jeeps in southern Utah, and it couldn't be MORE different! Mike's tolerances are nuts, Matt throws things together and both work for them.
If you’re looking for a good PS pump, the v8 wj pump upgrade is a fantastic, and bolts right up. Very minimal modification to the valve and its good! For $25 at the junkyard you can have a much stronger pump
@NMS350
2 жыл бұрын
We are doing two XJ builds and might have to give this a try!
@jeffsgarage8414
2 жыл бұрын
Nathan there should be writeups online. You might not find xj specific, itll probably be for tj. Its the same tho. It bolts up, just gotta use the valve from the xj pump and drill it out. Then ever so slightly bend the line to get around the bigger reservoir. Nothing to it
@Chris-zp6eh
2 жыл бұрын
Most of the front suspension will swap over also. At least for the TJ. I did the pump, track bar and drag link from the WJ. And the brake booster from a dodge Durango on my 04 LJ.
" We'll Get It Done ". Good work, I be happy to see the Banana back in service! 👍👍👍
We do thank you for your nice joba and being such a lovely family to watch and learn. God bless you all.
“Lay off at the gym, Rudy!” Funny comment, Trevor. 😂😅🤣
Lol love how they use a framing hammer to pound steel and a Ball peen hammer to break apart the wooden engine crate. 🤣
Goodmorning here from Colorado! Love Matt's off-road recovery
Has a nice milling machine and probably a drill press. Uses screw driver to drill 8mm holes in solid steel bars.
When you said stabbing and engine in there. I knew exactly what you meant. I've used that term while doing a few jobs. Usually it's used in "now I got to weasel and stabb that in there. A few choice words and possibly a busted knuckle maybe involved."
This is for Lizzie, learn as much as you can about how a vehicle works and how to repair one. You make this channel complete. You whole team is so great to watch. Almost 65 and helped over 20 years in my husbands garage, it was his " hobby" but now I find my self gravitating towards auto repair instead of decorating my living room. Funny how that goes. So learn as much as you can. 🤗
@ScottDLR
Жыл бұрын
I married a girl like you. She was rebuilding her eng (with help of neighbor) when I met her in High school. It's been a great life!
Drilling tip. Low speed, high pressure, lots of oil.
@augsu
2 жыл бұрын
Or use the milling machine that is right behind them.
@davewinch6029
2 жыл бұрын
Speed kills.......................Drill bits!
@rctjacksonville
2 жыл бұрын
Better yet, DRILL PRESS!
@williameddy1662
2 жыл бұрын
@@davewinch6029 Make sure that you have good drill bits .
@tracyknight5130
2 жыл бұрын
And relieve the shavings regularly.
Matt “no napping!” Rudy “watch this!” 😂
I like everthing about this video but the best part of all is watching a family having fun & working together ! Y'all are truly blessed . :-)
So glad to see a stroker installed into the amazing machine
@davidcox2197
2 жыл бұрын
Stroker equals more torque and better pull for stuck vehicles.
Lot's of stuff going on but you made some good progress guys !! It's been hot here too and working 10 plus hour days leaves little time for anything else so congrats on getting done what you did/have gotten accomplished !! Awesome show as usual ....
Country music poetry slam interlude was fab!
Well Matt & ALL Crew !!!! Great job so far as looking forward to see the ""BANANA " ALL back together & running for the next recovery !!! Have a ""COOL" week out there & ""KEEP IT SAFE ""!!
I Can't wait see my Jeep Running again!!
Matt I can’t wait to see how the new engine and steering works I always liked the Toyota style boxes anyway looks great my compliments to you and your team👍🏻
Matt that's an amazing video thank you so much watching all the way from Spain I really enjoyed always a pleasure watching you guys build stuff put things together and enjoy what you're doing God bless you guys as well as your family and friends thank you so much I really appreciate it all the way from Spain peace out
“Cut it to length, beat it to fit and paint it to match “ was my old motto. Works pretty good!
I can't be the only one who gets a huge smile on my face when Max or Lady make an appearance?
Colin got that manifold looking pretty good
YES! Main Street Cafe. The folks who run it are fantastic and the food is even better. If you are ever in Hurricane, you will not be disappointed by a visit to the Main Street Cafe.
Great to see you guys having so much fun while doing serious stuff. Can't wait to see more of the banana getting what it deserves and has needed.
good job on the intake colin.thats where i started cleanup
If you guys don't have one yet I think it's time for you to get a drill press machine. Like the cool vids and hope everyone is having a good day.
@Jbeales2
2 жыл бұрын
I've seen them use a vertical lathe as a press before.
@davidvoinier6008
2 жыл бұрын
Bridgeport comes to mind....
I THANK YOU ALL FOR MAKEING THESE VIDEOS..ITS A PLEASURE TO BE INCLUDED IN ALL THAT UR DOING..MAY GOD BLESS EA OF YOUS IN MATTS OFF ROAD RECOVERY GROUP...STAY SAFE ALLWAYS...
Well not typically people you'd want to meet (needing your vehicle to be towed), but nice people & family business (plus you get a free t-shirt!). Fabrication work on vehicles (like the Banana) very impressive. Laid back work atmosphere reminds me of Mayberry (circa Andy Griffith Show). Few people are as lucky these day's in that regard & best wishes to them..
So you're saying . . . you plan to take the Banana out of state after a fresh seat-of-pants rebuild, on tight schedule for an urgent mission. I think my entertainment for late September is already lined up.
You should have had a little ceremony to salute the Banana 4.0 motor and all the pulls it did. RIP soldier.
Looking great guys & gals. Can’t wait to see the next one.
Love watching all of you work together!
With the new self driving vehicles. It's only a question of time. Before we get a song about a cowboys truck leaving him. Lol God bless
We are going to get a lot of work done today. Let's go to lunch.
Love those motors. More bearings on the shaft for the straight 6 with the right setup give you lots of torque. Great vids and entertainment guys, nice job.
You moved the jeep to the motor! I once jacked a car up, connected a chain to the motor, then jacked the car down. I know that was dumb and sketchy, but it worked. I like the way Matt gets things done! Great video!
You have everything on this channel, singing, graffiti, impression, lunch, and no naps for Rudy. The Banana is going to be cool!
@bruceleealmighty
2 жыл бұрын
Yeah, the nap thing was a bit of extreme. It's like no one has ever heard of Siesta.
Measure third, cut twice, safety... Matt and teams design style gets rear world results, nothing wrong with that.
@waynerainey2606
2 жыл бұрын
Yep they get ‘rear’ world results, I agree.
@sk8xaq
2 жыл бұрын
*
@thereplacementfordisplacement
2 жыл бұрын
My bad, but perfection doesn't get noticed.
Main St Cafe! I always stop there when I visit Zion. Such a good spot. Recognized it immediately. Thx for the great vids
This channels so wholesome he just went over about how there's a time crunch now and they needed to get a lot done in a short while. Then next part is all of them having a nice dinner with family and Friends 🤣
"How do we have a successful KZread channel" next scene they are all skipping out the door
@bruceleealmighty
2 жыл бұрын
I really want to learn that editing technique.
@OliverKrystal
2 жыл бұрын
Because there's plenty of goofy people that enjoy them bring goofy
I was just in Utah yesterday exploring the state never realized how big it is
@chubbrock659
2 жыл бұрын
It’s like most western states, just huge expanses of nothing and the majority of population centered along the northern mountain ranges and small towns scattered around the rest.
@ironicchannelname6457
2 жыл бұрын
@@chubbrock659 I really enjoyed the expanses of nothing felt less crowded than colorado
@chubbrock659
2 жыл бұрын
@@ironicchannelname6457 me too man, love it.
Nice work! I love it when I get to use my F750 wrecker to pull engines. Going to do that later this week with an inboard boat motor.
And life just keeps on happening. Thanks for sharing ☺️
"Stab" is not an uncommon term for installing a powertrain, particularly when the engine and transmission are longitudinal and installed as an attached pair and where it's actually possible to install in that fashion. The particular verb is fairly dependent on exactly how one goes about doing the install. I would not expect that word to be used for the installation of a powertrain into rear engine, rear wheel drive vehicle where it installs by lowering the car body down onto the positioned assembly.
@bristleconepinus2378
2 жыл бұрын
ABSOLUTELY.
@rctjacksonville
2 жыл бұрын
I agree with the rear engine idea, No one wants to be stabbed n the rear!
@TWX1138
2 жыл бұрын
@@rctjacksonville There are entire genres of films that would seem to indicate otherwise.
@rctjacksonville
2 жыл бұрын
@@TWX1138 Your probably right about that.
@michaelshepherd7572
2 жыл бұрын
@@TWX1138 even in rear engined vehicles I’ve always referred to it as stabbing the engine.
New MORR video and new Fabrats video. Good Sunday 👍So Lizzy's making rescues on her own? Awesome 👌
@dragnfli520
2 жыл бұрын
I hope Lizzie has captured some of her solo MORRvair recoveries!
Doing laundry here in Cali after a great Sunday, Morning coffee with the guys, Home Depot shopping and puttering around the yard.
Here's a big thumbs up from a ZJ owner in the UK. 👍 🇬🇧
Good ol' one eye Matt running a grinder again without glasses and Rudy too. The devil always gets his due when you tempt fate. It's a long drive to St. George when you're blind and bleeding.
Trevor: "Where do you want to start?" Me: "With the pressure washer." Rudy: "On one side." ... I guess I'd have to be there to put in my 2¢. 😂
Always like how your video's are always family involved ,, can't wait for the future Lizzz build ...
This is the way to do it all in America... thats the comment of a german, which worked in America. Great job...
21:18 For a second there I thought he was gonna give himself another raise.
Some parts, especially the drilling, are like a three stooges movie. Hey Curley, Hey Larry, Hey Moe.E B B B B B B Nuk , Nuk, Nuk ! Gimmie another drill bit. Sorry. I didn't really say it in a mean way. You were having fun and I did too. Seriously, it's good to see you having fun.
Love this wild eyed engineering. The engine is going to be awesome in the redesign. Go Banana!
It's coming together nicely, Matt! I can't wait to see it in action! 😎
When you bring it to the dyno buddy is gonna have to try and sprinkle on some more buff hursepurrs than the Morvair.
@augsu
2 жыл бұрын
That 4.0 is a better motor, 6 in a row ready to tow!
Matt is a Genius he knows how to motivate his crew which is rare now days. Teaching young people skills like this is almost unheard of
@perryleduc1954
2 жыл бұрын
blue lives dont exist....
@bluelivesmatter3600
2 жыл бұрын
@@perryleduc1954 neither do do losers like you. We always know who the criminals are. Lol.
VERY VERY glad to see Lizzy's hair up out of the way in the workshop, Thanks Guy's, Fan of Lizzy and the rest of the crew from Australia.
When matt started singing the theme song, we were at that point, both singing together. It was beautiful.
Please do a side by side before and after when the 🍌 is done so we can see all the changes. Thanks for all the great videos
As for the singing--- as they say-"keep your day jobs"... :)
@1tulip
2 жыл бұрын
I hear ya! Like I always say, "I can't sing either, but I don't feel inclined to go around proving it to everyone.
I do love watching your videos can't wait for the next one be blessed always 🥰🤗🥰🤗🥰🤗
Good stuff as always and looking forward to the finished results