Always enjoy what you're building. Love that massive chop sound. Thank you for sharing these builds and your knowledge.

@MasterTechMiller

3 ай бұрын

Glad you enjoy it!

@jasonking6374

2 ай бұрын

Yeah top job Tommy, that Breakout sounds amazing mate.

Missed these build videos been to long.... May all your days be Harley days 💪🖤🧡🖤💪 Safe travels 🙏♥️🐾🐾🇦🇺

@MasterTechMiller

3 ай бұрын

Thanks for watching & being patient 🙏

Great job on the new format. Truly enjoyed this video. Thank you Sir!!

@MasterTechMiller

3 ай бұрын

Thanks for watching!

Awesome, great vid and massive torque! Way to go 👍

@MasterTechMiller

3 ай бұрын

Thanks for watching 👍

Can imagine how well this bike performs. My 107 with the CR483 is awsome and the sound with the Freedom radius pipes is great too. Love these videos. 👍

@MasterTechMiller

3 ай бұрын

Thanks for watching 👍

Very cool! Really appreciate you sharing these builds! Way over my head but love to see how it goes together. Thank you Master Tech Miller!

@MasterTechMiller

3 ай бұрын

Glad you enjoyed it!

Hi 👋, I am new to your channel, awesome content, great that you show assembly, as best as you could, Great looking and selling pipes, But I have always been into two into ones , I Pass my bike test in the late 60 in the uk , I am on my 4th HD 1200 sportster , FXR , then I purchased a new DEUCE back in 2000, upgrades to 1550 , sadly I had to sell it in 2019, 48,T + , I had been scammed by my ex female partner, So I moved to France, I have just bought a 2003 DEUCE, it needs a lot of work on it, it hasn’t been written for as part of a year, At least it will give me something to do , Look forward to seeing some more of your up-and-coming reviews and upgrades , I do wish I was back at work and need some pennies, From France.

@MasterTechMiller

3 ай бұрын

Thanks for watching! Hopefully you'll be back on the bike asap!

Amazing machine This one is bad ass Tom, love the breakout.

Gorgeous bike and awesome numbers! Great work as always.

@MasterTechMiller

3 ай бұрын

Thanks for watching

gotta love that 483 chop , puts a smile on my face every time i ride

@MasterTechMiller

2 ай бұрын

It's a winner!

You have a great channel. Your clients are lucky to have youm

Thank you, it’s was most appreciated.❤

@MasterTechMiller

3 ай бұрын

Thanks for watching 👍

You are a master at your craft Sir, lovely numbers and the bike ended up show and go which is kinda hard to achieve. Looks and sounds great.

@MasterTechMiller

3 ай бұрын

Thanks for watching 👍

A H-D master technician Legend!!.. outstanding job. Australia's best.🇦🇺💪

@MasterTechMiller

3 ай бұрын

Cheers mate! Aiming high!

Another professional build very well done job.

@MasterTechMiller

3 ай бұрын

Thanks 👍

Fun! Wrenching video. You've got another subscriber

@MasterTechMiller

3 ай бұрын

Thank you

awesome build I bet that bike is a thrill to ride

Great job as always Tommy💪 …..Welcome back

@MasterTechMiller

3 ай бұрын

Thanks for your patience 🙏

Cruise the twisties on weekends, then haul road trains across the paddock on weekdays. Fn brilliant Tommy. That’s a cool engine👍

@MasterTechMiller

3 ай бұрын

Thanks for watching & supporting the channel 👍

@terrymoore7852

3 ай бұрын

Some of the best Harley porn there is 👍

@terrymoore7852

3 ай бұрын

@@MasterTechMiller no worries mate. Some of the best HD porn out there 👍

Great video as always.

Great video, awesome bike and nice work on the build, that cam is awesome as its the same I have had fitted a couple of weeks ago in my Breakout, pulls like a train. The guys at Darling Downs Harley are a great team.

@MasterTechMiller

3 ай бұрын

Thanks for watching mate. Glad you're happy with your choice of cam. Enjoy

Baseline graph looked fantastic I have to say

That is a work of art. Beautiful iron horse

Dude does quality work!

@MasterTechMiller

2 ай бұрын

Cheers

😮 good stuff 🤘 thanks 🔥

I am constantly told two into one exhaust is better for torque and horsepower but I to have the big radius V&H on my stage II, I just like the look and sound, form over function I guess, nice build!!!

Finally a video!!! YES!

@MasterTechMiller

3 ай бұрын

Thanks for watching & being patient

Really enjoy watching you build engines. What brand ring compressor do you use?

@MasterTechMiller

3 ай бұрын

Snap On

It's a runner!!! Great job Tommy 👏

@MasterTechMiller

3 ай бұрын

Thanks 👍

@benslocum7412

3 ай бұрын

@@MasterTechMiller you ever get the cam switched out on your bike?

@MasterTechMiller

3 ай бұрын

@@benslocum7412 sure did! It got put in yesterday. I am sitting on the bike as I write this comment about to start dyno tuning it.

@benslocum7412

3 ай бұрын

@MasterTechMiller awesome. I'm excited to see what it does now

You have been quiet Tommy, was getting worried, hope you are well !

@MasterTechMiller

3 ай бұрын

Thanks for your patience 🙏

Good torque production and curve with a short 2-into-2 exhaust.

Need the accessories video Tommy 😁 show of the quality custom build you have done 👍

@MasterTechMiller

3 ай бұрын

Will try put something together for sure

Amazing. Thanks.

Wow what a machine. I want to bring my Fat Boy from Melbourne VIC to you to get some work done. Thanks for these great videos.

@MasterTechMiller

3 ай бұрын

I'd love to build an engine package for you if you made the trip up to QLD

@shanechesterfield6808

3 ай бұрын

I highly recommend it buddy. His an absolute legend at what he does. 🇦🇺

@bhavanonharleyinaustralia6966

3 ай бұрын

@@MasterTechMiller thanks mate...I will call you to organise it

@MasterTechMiller

3 ай бұрын

You can email too if you like at workshop@ddhd.com.au

Love the content and checking in from time to time for some inspiration….you’ve got this performance thing locked down 🤘 congrats on hitting 10k!! It’s interesting to see someone else’s process for building a motor being a master tech myself, which leads me to one question…I noticed you used blue loctite instead of red on the cam gear bolt and the pinion gear bolt, is there any specific reason? Keep up the awesome work 🤘

@MasterTechMiller

3 ай бұрын

Its more than capable of keeping it tight. In my 15 years I've only ever had 1 issue with a cam bolt. It had broken but I didn't work on that bike. It came in to us with a noise on the cam chest. Not sure why it broke. I've obviously done many cam swaps on bikes I've put cams into & every time I undo the bolts they're tight.

@VtwinRevolution

3 ай бұрын

Seems like I remember there was a run of those cam retention kits that were breaking the cam bolt, we saw a few at our shop. Cool, like I said it’s just interesting to see someone else’s process when building a motor. Keep killin it dude 🤘

2:06 Supervising. Making sure the parts are treated right. 😂

Loved it. 🙏🇦🇺

Another great video on a fantastic 131 build. Great cam choice.. great torque.. how would the CR 512 compare numbers wise

@MasterTechMiller

3 ай бұрын

If I was to put the CR512 in this combo as it is, the peak HP numbers would be much the same due to the exhaust choice.

The only way to build a harley engine. Huge torque in the useable rideable rev range . Forget about hp numbers in the top revs .

@MasterTechMiller

3 ай бұрын

Absolutely 💯

Another awesome build with impressive numbers. The breakout is a brawler of a bike and that one has some major attitude I really like that air cleaner too, which one is it?

@MasterTechMiller

3 ай бұрын

The air filter is from RSD & the number is P02062144SMB

Let's go 🤙🏽

I could watch this shit all day. What's the best performing 2 into 1 pipe in your opinion ?

@MasterTechMiller

3 ай бұрын

For the majority of builds the D&D Lowcat performs great! If you have a really BIG hi comp big bore build your best options is a Burns

@Icemaiden28.

3 ай бұрын

@@MasterTechMiller legend mate cheers... Look forward to future builds

Nice 😂👏 rocket 3 torque there

Question: going that deep into motor, why keep the chain drive if using an s&s crank assembly? would not think it was because of run out?

@MasterTechMiller

3 ай бұрын

No benefit whatsoever from a gear driven cam set. The argument about 'tighter timing' & the rest of it is just straight up nonsense. The amount of stack up tolerances & deflection in the valve train renders that argument irrelevant. As for the fact of wearing out chain tensioner shoes, well that too is just a selling point for gear driven cams to pounce on. Regular servicing these chain driven sets last for over 100,000km. There are many different conditions that may accelerate the wearing out of parts but I can you now, after 15 years with Harley's I've only has 1 issue with a cam chain breaking & it was on a stock Twincam. Sure I've seen tensioner shoes wear out but those too where on the early Twincams with the spring loaded shoes.

that sounds wild Tommy. A question if I may? Do you find the coating on the piston skirt lasts very long?

@MasterTechMiller

3 ай бұрын

The Coatings on piston skirts is there to add protection during cold starts. That's it. If the piston to bore clearance is in spec & the engine is being serviced regularly the coating should last a very long time

Can you explain (in small words for me please) the practical difference between the V&H Big Radius 2-2 Exhaust system and the Freedom Exhausts you mentioned that gives a boost in HP for the latter. On the outside, they look very similar: both 2 into 2, both short and that's about it.

@MasterTechMiller

3 ай бұрын

The V&H Exhaust systems are 2 individual pipes. The Freedom Exhaust systems have a balance pipe between then about 3/4 of the way down. This balance gives an advantage similar to having a 2-1 system.

I want one

how ya reckon the 131 would go with the CR480 cam? similar to this one?

@MasterTechMiller

3 ай бұрын

Yeah most likely very similar outcome but without the great idle sound

What was done to the front forks? Are those covers? Did he lower it?

@MasterTechMiller

Ай бұрын

Yes they are fork covers. The front wheel has been changed to a 23" The fork legs are standard length.

She's gorgeous ❤️‍🔥 Harley-Davidson 👊👆

hello, what about ride ability in the lower gears? Will this produce surging ?

@MasterTechMiller

3 ай бұрын

This thing is still smooth as & very controlled at lower speeds & throttle positions.

@johnbeardsley7360

3 ай бұрын

Ok, you build some of the nicest!

Hey mate are you a believer in external breathers for the air cleaner? Do you run them on your builds?

@MasterTechMiller

3 ай бұрын

No. I prefer to just vent the trans cover. You can then decide to put normal bolts in place of where the breather bolts go & let it all breath through the trans cover. Or, you cam vent the trans cover & leave the breather bolts installed as the vented trans cover relieves the pressure across the engine & greatly reduces the oil misuse recirculation

@danr919

3 ай бұрын

Thanks for your reply and tips 👍

Mastertech Miller, what cam would you recommend for really good horsepower and torque for a screaming eagle 131 build with some heads done with chrome two into one exhaust

@MasterTechMiller

3 ай бұрын

What compression ratio is it?

@robertfagan8833

3 ай бұрын

@@MasterTechMiller not sure yet probably 11:1. Not sure what the builder has in mind

@MasterTechMiller

3 ай бұрын

CR515 will tick all your boxes. It'll make over 150hp & 160ft/lbs

@robertfagan8833

3 ай бұрын

Thank you

Hey Tommy, what’s your experiences with fuel use after a cam and tune? I’ve got a 117 CR483 and 6.2 injectors. Even when riding sedately I’m using about 9L/100km so would this be resolved through more tuning or is it just part and parcel with increased power.

@MasterTechMiller

3 ай бұрын

That can 100% be fixed with a good dyno tune. Where are you located?

@MasterTechMiller

3 ай бұрын

That amount of fuel use seems very high

@jamesp6128

3 ай бұрын

@@MasterTechMiller I’m in Sydney and a 20 hour round trip to come see you is a bit hard right now.. yes I expected it to be worse on fuel on if I was on it all the time but the same if not better when riding normally

@MasterTechMiller

3 ай бұрын

@jamesp6128 yeah it shouldn't be much worse than stock tbh.

@jamesp6128

3 ай бұрын

@@MasterTechMiller Hey Tommy, case solved! I installed baffles (VH Eliminator 300) after my initial tune and it was playing havoc with the AFRs hence the poor fuel economy! We got it dyno tuned again today, got ~10-15ft lbs between 2200 - 3500rpm (mainline dyno) and my AFRs are spot on again.

Hi Mate, is that air suspension or lowering Kit?

@MasterTechMiller

Ай бұрын

Air Suspension mate. Platinum Air Suspension

What are using to tune the bike?

@MasterTechMiller

3 ай бұрын

Direct Link from Technoresearch

I didn't see the C-clip go into the piston. That would hold the wrist-pin in place with in the piston.

@MasterTechMiller

2 ай бұрын

I never put them in. Saves a little bit of weight & helps with quicker RPMs

Just curious, was the stock 131 flywheel not good enough? Why the S&S?

@MasterTechMiller

3 ай бұрын

The S&S flywheel is constructed much stronger than the OEM Flywheel. That's why we went that way. The customer plans to give it a hard time. The OEM Flywheel is fine to run in 131ci applications but only as long as its a gently ridden.

@user-os1mm8to6l

3 ай бұрын

@@MasterTechMiller that leads me to a follow-on question… if purchasing a 2019 Road Glide with only 2,000 miles on the odometer and a 131 stage 4 upgrade installed, should I be cautious of the factory flywheel or any other recommended weak points before purchase?

@user-os1mm8to6l

3 ай бұрын

@@MasterTechMiller also, thanks for your reply. I am subscribed and enjoy your videos.

@MasterTechMiller

3 ай бұрын

@@user-os1mm8to6l No worries! Thanks for watching & supporting

@MasterTechMiller

3 ай бұрын

@user-os1mm8to6l There is no way of ever knowing how the bike has been treated or ridden it whole life. Whether it's a 131ci or a Stock 107ci, if it's had a hard life you're still taking a gamble no matter what. I would be mainly concerned if it's a late model 2019 bike or an early model 2019. The later model 2019 bikes 10th month onwards have the 8 lobe oil pump in them.

Those wheels are nice, how expensive are they, great build yet again Mick

@MasterTechMiller

3 ай бұрын

Not sure what the customer paid for the wheels? The rear is a genuine Turbine wheel out of the Screamin' Eagle catalogue & the front is a 23" Turbine replica.

@geoffozevans4500

3 ай бұрын

@@MasterTechMiller thanks for replying so quickly 👍👍

In your opinion would it be a cheaper or more economic option to install the HD 135 crate engine, & selling the stock unused 117 , I've thought of doing this here in the UK 👍

@MasterTechMiller

3 ай бұрын

Depending I suppose. I've never say down & worked out the numbers. I know for sure the SE 135ci Crate motor would need a cam swap in case to get close to this.

@geoffozevans4500

3 ай бұрын

@@MasterTechMiller 👍👍👍

@maveryckstevensonesq9397

Күн бұрын

I don't think they have a 135 crate engine for a Softail yet.

@geoffozevans4500

Күн бұрын

@maveryckstevensonesq9397 lots of performance parts out there to make a beast of a motor

After the big motor and cam.. rockin toque for the riding areas. Who cares about what it’s doing at 6k Nobody riding up there usually unless racing and trying to get that little edge out on your buddy

@MasterTechMiller

3 ай бұрын

Absolutely 💯

How much, about is a build like this?

@MasterTechMiller

3 ай бұрын

Typically, the 131ci Screamin Eagle kit fitted & tuned with an aftermarket cam like this one is around $8700AUD

It been while , i just finished 128 with my cam change from 475 S&S to a 515 CR with springs also changed my throttle body from the 55 to 6.4 and 6.2 injectors . And changed my air cleaner to the HD high flow SE , and a Khrome Works 2into one outlaw . Only got 140 torque 132 hp , i had 147 tq with 475 S&S. Not sure what is going on , the tuner he was not sure himself . It is very fast a lot better than the 475 .

@shanechesterfield6808

2 ай бұрын

Are you QLD local ? Take your bike to him, I reckon he will get the best possible performance from it for you, or tell you what to to do. Maybe call him , Darling Downs Harley Davidson Toowoomba. He's getting alot of interstate clients from Vic, and NSW.

@charlesmccurry3602

2 ай бұрын

Ok thanks , it seems like the tune can’t think of anything else .

@charlesmccurry3602

2 ай бұрын

I live in Phoenix Arizona

@shanechesterfield6808

2 ай бұрын

🤔 yeah might be a little to fare 😂

How many miles will he get out of this? The piston is so short it will start to rock and use oil.

@MasterTechMiller

3 ай бұрын

I'll pass that information on the Engineers at MAHLE & Screamin' Eagle.

@8mywal8

3 ай бұрын

@@MasterTechMiller I am not being a smart ass, I am simply asking how many miles would be expected? It is not like the engineers are caring about longevity they care about the #'s it produces to make the customer happy.

@MasterTechMiller

3 ай бұрын

@8mywal8 these pistons are manufactured by MAHLE. A leading & very reputable manufacturer. The pistons are absolutely fine & they will last in excess of 100,000km. I will convert that to American. To calculate this, we first need to know the length of a cheeseburger. Let's assume a typical cheeseburger is about 15 centimeters long (half a cheese burger) Then, we can calculate: 100,000 km = 100,000,000 meters Now, we'll convert the length of a cheeseburger to meters: 15 centimeters = 0.15 meters Now, we can find out how many cheeseburgers would cover 100,000 km: 100,000,000 meters / 0.15 meters per cheeseburger = 666,666,667 cheeseburgers So, it would take approximately 666,666,667 cheeseburgers laid end to end to cover a distance of 100,000 km.

how much is that set up?

@MasterTechMiller

2 күн бұрын

The 131ci Kit is $6700 AUD, the cam is $579 Then install & tuning costs on top. Each dealership varies on labour rate & tuning fees.

With the price of a new Breakouts they should come straight from the factory like that. But like most other Harleys you have to spend even more thousands them to get the best performance out of them. 🤔😏

116 Thunder stroke "in sport mode" will leave you standing still. 😂😂😂😂😂

@MasterTechMiller

3 ай бұрын

🤣😂🤣😂

131 Cubic inch engine and how many horsepower does it produce? 137 horsepower that’s almost pathetic for a monster engine

How do you expect to get HUGE torque out of those pipes I'ld like to know.

@MasterTechMiller

3 ай бұрын

These pipes are always known to provide a strong torque curve early in the rpm range. They lack peak HP figures in the upper rpm range

@swede910

3 ай бұрын

@@MasterTechMiller And you don't know the problem with that, but you see it on your dyno maybe?! 🤓

Omg the music mate…plz

@MasterTechMiller

2 ай бұрын

Suggestions?

This review is not complete! WE THE "COMMENTERS" NEED TO RIDE IT FOR A AFTERNOON! Only then will "we" know the truth, LOL! By the way, I would buy it just for THE LOOKS AND THE WHEELS. Personally I worry about "engine OIL HEAT" on all such engines over 110C.I. I am concerned about huge air cooled engine and engine temperatures. That said PLEASE MAKE ONE OF THESE FOR ME.

@MasterTechMiller

2 ай бұрын

I'd love to build you a combo! The M8 engine platform has oil cooled heads as I'm sure you are aware of? The cooling is concentrated around the exhaust valves of the heads to help extract the heat as best it can. Also the oil volume of the M8 platform is much higher than the Twincam models. Approximately 4.6ltrs compared to the 3.5ltrs found in Twincam touring models. The VVT M8 platform has water cooled heads that has priority flow to the rear head. A revised & better design than the non VVT M8

@Bill-xx2yh

2 ай бұрын

@@MasterTechMiller BEAUTIFUL.

I’ll stick with my Ducati XDiavelS

@MasterTechMiller

3 ай бұрын

Thanks for stopping by & checking out the video

I just love wanna be dj's. You aint workin on my s**t, spin your music n put the bike away

@MasterTechMiller

3 ай бұрын

Not sure if you're having a dig at my choice of music for the video or if you're having some sort of dig at my workmanship? Either way, it's been very windy here lately & all my spare 'S**TS to give blew away.

Lose those stupid reflectors.

@MasterTechMiller

3 ай бұрын

They're already off. Just so happen to be after the filming & the final clean/wash of the bike were they removed

The music at 3 minutes is the background for let's go Brandon

@MasterTechMiller

Ай бұрын

What's Let's go Brandon? People keep mentioning the music choice....have I missed something?

Typical parts guy doing nothing...lol then walks away when the heavy lifting happens! typical spare parts guy