That shot at 1:58, that is exactly where you never, ever, _EVER_ want to be while next to a spinning propeller. You are right in line with its plane of rotation. If anything on that prop fails it's going to go right thru you. Airplane Safety 101.

@justing42

Жыл бұрын

yawn

@lbowsk

Ай бұрын

And what are the chances of that? Low enough that the FAA certifies aircraft to put SEATS in that plane. I mean, why leave the house for Gods sake!! Drive a car? Are you nuts? Never, ever EVER do that.

I remember seeing a guy walk in front of a jet prepping for take off. He got sucked in the intake like a rag doll. I don't take engines lightly as a hobbyist so best believe I wouldn't take standing in front of a air slicer granted. Like I always say, you can become an engineer but it doesn't mean that you're actually smart. Stop standing in front of these things because engines can run away and go full throttle at times even if you think you have the full control or "expertise" around them.

@chip5942

2 жыл бұрын

I remember the same video , treat them with respect or they will eat you up

@SiniTuulia

2 жыл бұрын

The dude survived!

@broddsaviation5471

2 жыл бұрын

I mean, if you are running the engine on idle, you CAN walk around 3-5m forwards of it. However, the EASA AR’s requires a minimum of a 5m half circle before / to the side of the fan (CFM-56-7 series)

@f0izan161

2 жыл бұрын

The plane or you can say jet engine sucks in air so thats why when its running you should not stand in front of it

@BurnleyNuts

2 жыл бұрын

@@SiniTuulia The dude survived by luck that his helmet jammed the fan blades.

Garrett TPE331 turboprop engine used in Merlins was one of very best I ever operated without one single engine failure in thousands of flight hours. Incredible Bullet-proof power-plant with instant response.

@danwilliams1363

2 жыл бұрын

The 331 was a horrible engine when it first came our. In Asia we had many engine failures mainly due to fuel control issues.

2:00 ah yes, time to stand next to these metal blades spinning very fast

@interestedparty7428

2 жыл бұрын

I bet someone watching this is thinking “I wonder what happens if I just touch it”

2:12 😊 That Merlin V12. Like music to my ears.

@wilburfinnigan2142

4 жыл бұрын

Backyardmech That merlin was an early version, most likely a 20 series, ie 3 blades prop making it the single stage 2 speed supercharged version, NOT the later 60 series 2 stage 2 speed version all Brits slobber and drool over and get their "wee willies wiggling"...........60 series merlin has a 4 bladed prop !!!

@6:00 this man standing in front of a spinning turbine!!! not being afraid he'll get sucked in and killed! that....is balls of steel

@Tiago_C

7 жыл бұрын

he's actually pretty far away, making zoom at the engine. you only need like less than 10 meters away to stay safe. Not a big deal. 2:00 , THAT is balls of steel

@blumac9801

7 жыл бұрын

Austin Esmie the plane engine is idling, they don't suck up al much air in idle, so he's fine, but if the plane were to take off with him in front he would get sucked in

@dreaded_pegasus6578

6 жыл бұрын

An engine at idle doesn't suck as much as you think.

@Tiago_C

6 жыл бұрын

Blumac5 that's correct

@jezza82

6 жыл бұрын

They didn't even start it. That's just a dry motor. No fuel. No suction.

Fantastic!Love this;thanks so much for posting.

What a sound! Dis guy right here always watch the plane video from here with my rock playlist crancked to 11. Metallica, Delta Parole, ACDC etc. AWESOME!

Dear crazy engineer too much enjpy!!🎉🎉thank U again. Dani Daniela

Ok, the jet engines are cool and all but that PW engine at 1:10 is just wow...

The Rolls Royce starting was a beautiful thing, like music, that header setup was pretty sweet too

The engineer in me loves this!!!

4:00 the original rotary engine, no angry Doritos required.

Love the roar of the radial engines

I wish my V6 sounded like that! 👍

I work in a factory that makes compressor blades and vanes for the jet engine at the end. My job is called gauging and what I do is make sure the blade or vane is set at the right dimension that the customer asks for. Rolls Royce and General Electric are the main two customers we have.

@BurnleyNuts

2 жыл бұрын

I'm from Barnoldswick with they make the wide chord blades for the Trent too.

@birkinsornberger263

11 ай бұрын

So you're just QC?

The people who engineere these machines are geniuses.

@Admiral45-10

2 жыл бұрын

As are those who later build planes which use them.

767-300 is an aircraft type, which, depending on individual airline specifications, is equipped with one of three different manufacturer engines; GE, Pratt & Whitney or Rolls Royce. In this case it is GE CF6-80 series engines.

@pimuce

4 жыл бұрын

Jim Penfold man can be aspired by reactor

I build engines all day every day. I take for granted how much of a great job I have cause I don’t get to start them.

Airplane engines are very loud,fast,powerful and huge!

@gamesvrtech6666

2 жыл бұрын

WHAAAT???

Safety is more important while working with powerful engines

Now thats the perfect engine for my lawnmower

@guilhermeleiteleite8134

5 жыл бұрын

Fette_ Bohne AE American calls me in the whatszap +5511947697403

@beeshin9945

5 жыл бұрын

Bald grass

Thanks . Very useful .

1:55 I was leaning back. Like REALLY back.

@emix1010

6 жыл бұрын

Nirmit Official - Me too. That went against everything my dad ever drilled into my mindset about engines and power tools. And he was an amateur pilot, and even learned to start an engine by turning, or throwing?, the propeller by hand...

@flightmaster999

5 жыл бұрын

I used to fly small prop planes and walking next to a propeller like that was probably the first thing you were told to NEVER do.

That last one looked like JFK Airport though it's amazing at how quite these engines got over the years as kid growing up in the 1980's to now they are almost whisper quite with maybe a couple of older jets flying over my house and being alive to hear the mighty Concorde my god you could hear it before you saw it what a time to be alive someday I hope the world will be ready for an SST again

Ready to take of! Nice Video! xD

@tuneboyz5634

3 жыл бұрын

Yes it is ☺ you're a funny boy 🙂 smol boi 😝

Man he got balls of iron to stand next to that spinning propeller

Como me gustas los motores de avión. Un gran trabajo.

Thanks for the great Video awesome cool nice time by thomy a great channel mega a great Fan

Fun fact: the "spiral" on the front of the engine nose cone is designed to hypnotize birds so they wont feel pain when they get sucked into the engine...😅

nice video,....seems like vintage era planes of black and white times of 16th and 18 th century again shot at....

Holy Rolling Shutter! That's a Tech Demo.

That merlin was sick.

Did that guy seriously walk beside a spinning prop!!!!!!!!!!!!!?????????????

@SCFPV

6 жыл бұрын

Nick Lohr Yeppers, He/She must have the biggest set of cods/cahunas/nuts/seeds/balls/boys/nads/ or duffle bags, the world has ever known. I was sitting here watching it and thinking, man this fucker is about to shave their face smooth the hell off. Fuuuuuuck that! Dumbassism to the extreme.

@venkannapalemyouth4261

6 жыл бұрын

e

@gfimadcat

6 жыл бұрын

Yes, yes he did. And really fucking close as well. But oh well, idiots are gonna idiot...

@LocoFaux

6 жыл бұрын

Did you guys forget that camera zoom is a thing? It'd explain why the footage was also quite shaky. Still though....not safe to be beside spinning props.

@darioinfini

6 жыл бұрын

You'd think Darwin would have weeded out all the situationally unaware specimens by now but evidently they keep mutating back into the gene pool.

Круто 😎 бальзам на душу от звука и мощи.

0:35 love that time

Nice!

For anyone who’s curious the 767s engine is a General Electric CF6-80C2

@PedroReyes-pr5er

Жыл бұрын

They also power by P&W engines!?.

@NicholasRiviera-Dr

11 ай бұрын

And Rolls Royce RB211’s

5:51 my fav

Beautiful 😊💣

6:30 not a clever place to be. 💀

@thejafuu5001

5 жыл бұрын

i wonder why there are those white marks in the center XD

@ImperrfectStranger

5 жыл бұрын

Not the smartest, but he's pretty safe. The engine is at idle. The safety radius for a CF6 engine is 7 feet (just over 2 metres)

@shadowph4ntomfortniteplay358

5 жыл бұрын

@@thejafuu5001 its the spiral to avoid birdstrike, if a bird sees it, it will go away

@thejafuu5001

5 жыл бұрын

@@shadowph4ntomfortniteplay358 I heard it's also for ground safety

@MrPopcornBattle

5 жыл бұрын

@@thejafuu5001 Mainly its for scaring off birds, but yes it is a good indication too for showing that the engine is spinning.

FROM 1:42 TO 2:10 IS THE STUPIDEST MOST DANGEROUS CAMERA WORK EVER IN THE KNOWN UNIVERSE ! ! !

@viper-wr8bi

5 жыл бұрын

Helve Hammer fucking stupid he could have been sliced up

@manw3bttcks

5 жыл бұрын

The camera may be held on the end of a stick

@user-ws7ht3ys3g

5 жыл бұрын

or used zoom

@alexchabanenko6347

5 жыл бұрын

he tried to lick the blades ... suicide ... oh no he was going to make a manual start

@boston234789

5 жыл бұрын

Helve Hammer agreed

Damn! I could smell those exhaust fumes from here, behind my laptop!

@libby6462

3 жыл бұрын

Crazy! These exhaust fumes were almost as hot as my laptop overheating!

Excellent 👍

Clickbait... I wanted to see the GE-90 in the thumbnail. -_-

@tinytattoomike7943

6 жыл бұрын

ASJE Aviation HQ me too 🤔

@dandan2604

6 жыл бұрын

Cfm56!!!

@steveaycock4853

5 жыл бұрын

No doubt, I actually work for GE Aviation and we manufacture the rotating parts inside this awesome engine. They are in a class by themselves.

@samanli-tw3id

5 жыл бұрын

Me too!

@sebmat223

5 жыл бұрын

Same

Also the mind becomes strong and calm Thank you Daniela

your going to crack the manifold doing that, those heads were glowing.....

Dude! Thats my video! Awesome!!

@mrfireedwards2195

5 жыл бұрын

Dreddip what one

1:47 my anxiety killed me from the inside

All those exposed prop blades are a bit of a worry.

Preger University always is at least as good as the video! Bless them! Put them in charge of our schools!

we're here for the sound ;-)

Hermosos...Los imagino en combate!!

Listening this great test engineering the Heart becomes Strong and calm. Thank U. With Regards Daniela

Nothing Cooler!👍👍

While watching, I saw something about helping subtitle this video. I'm so very tempted.

1:41 That guy looks BRUTAL!

I love turboprops, but i also love the rolls royce merlin. Best engine of WW2.

@wilburfinnigan2142

4 жыл бұрын

davidca96 Not that early merlin !!! ! That is NOT the version slobbered and drooled over !!! PW R2800 was a better engine and almost as many made, and more HP !!!! ! DUUUUHHHH !!!!!!!!

Nice Engineering

stands in fron of blades... right dude you got balls especially that 767

I liked this

@ 1.00. What a brilliant picture . Old geezers watching a piece of metal get hot then walking off once it is.

Amazing, very nice operations of engine !!!

This just makes me think about Furio almost throwing Tony into the propeller lol

amazing

Good sounds

Really awesome video!

@CarNewsTV

7 жыл бұрын

Hunter J. Short + Thank you much friend! :) Dont forget subscribe channel. new videos every second day . Cheers, have a nice day

@customengravingsbyhuntersh657

7 жыл бұрын

No problem! And sure will, i love cars and anything to do with them so ill be on the lookout! :D

Nice

They were all pretty small engines don't you think? The thumbnail engine isn't even featured. That always gets my goat.

awsome

The quiet music at the end came as a total shock

imho you should had added to description names of aircrafts on which they were used.

Damn that’s fast

@siva-se9cy

3 жыл бұрын

Hi pretty

ÓTIMO VÍDEO, BRASIL OK.

@CarNewsTV

5 жыл бұрын

Kleytons + Thank you :)

2:15 when you have constipation

Goose bumps especially the third one looks like a b29 engine correct me if I’m wrong👏👏

It's a shame the way modern digital cameras distort the props. I like the "old" look better.

I'm working at jet airways, engineering department since 2011, Super marbalous

1:55 you never get near a spinning prop like that

4:57 gta San Andreas stunt plane is that you?

@drewscheller4956

3 жыл бұрын

Clickbait... I wanted to see the GE-90 in the thumbnail. -_-

@trey_rdee

3 жыл бұрын

@@drewscheller4956 that’s a cfm56.

Yes it was great seeing my

2:00 BALLS OF STEEL

@rolandtiiroja

7 жыл бұрын

why not lol

@mohammadjulhas6417

7 жыл бұрын

good.job

@shourovsumi7808

7 жыл бұрын

Mohammad Julhas c

@harrymanback8827

7 жыл бұрын

Judith Tardo fuck u too ,🤣

@harrymanback8827

7 жыл бұрын

Judith Tardo calm down girl ! What r u talking about why r u so upset ??

5' parallel from active blades is exactly where you should stand. Not.

I want this type of fan In my room this Summer

Very nice

That first rotary scared me not gonna lie

My 12 year old PC while it boots up:

6:33 bad bearing washing machine 😂😂

Some off those, seems my old car...my god!

nice

super

sensation & mecanique

Till the last was very good

3:40 - 3 of the cylinders aren’t firing, with one waking up just a bit at the end... but let’s rev it up!!

6:27 - Sensible place to film...

That v12 is the best one in my opinion,,it kicks but!!!!!!

@wilburfinnigan2142

4 жыл бұрын

Sean Naaaaw !!! The PW R 2800 was !!!!

2:11 that wasn’t too bright of an idea!

l like vary much

@titatko

6 жыл бұрын

Yoyo Yoyo, really, you like vary match? Which one do you like better? Licking my hairy nutsack or watching jet engine??

Aviation is my favorite part of being a man. From a $30 drone to the Saturn V, human flight is what I love most. Nothing more satisfying than a good woman after a successful flight. Except maybe good Rib Eye and a glass of a good Scotch. And a good nights sleep. So, a good flight, a good meal, some good whiskey, a good woman and good sleep. That's my favorite part of being a man. And then, doing it again, the next day.

Пропеллер как выгнуло, это все магия)

@jimryan3501

7 жыл бұрын

Some powerful engines

@pinkycoffeeboat

7 жыл бұрын

Jim Ryan ...and some amazing displays of stupidity from both the operators and those wanted to film them.