You can find all the tools mentioned from 313Tint.com SunDistributingDirect.com TintDepot.com

@trilingualkid

Жыл бұрын

can you show us how to identify if its carbon or ceramic tint?

@andrewduran8365

Жыл бұрын

Do you guys do any shipping overseas to Dubai?

I have been practicing and finally have installed good looking tint and the secret for me was to use higher quality tint I have learned so much from your channel and appreciate you so much thank-you for helping me on my tinting journey and have my first client on Friday can’t wait all thanks to you and your channel!!!!

@DetroitTintStudio

Жыл бұрын

Congrats! My first car took about 6 hours and probably wasn’t amazing. Don’t be afraid to fail forward and the first year is always the hardest. Everything comes with focus, practice and time. Crush it! 🎉

@jarmanjitsingh4936

Жыл бұрын

Hi plixz, how to stop little contamination on rear window glass, i try all method of installing rear window, but still some little contamination somewhere on it

@Flowlool123

Жыл бұрын

where can i buy higher quality tint ??

@NoLurp

Жыл бұрын

I had to do a back window like 20x because I was using shitty tint and couldn’t shrink it. I also am new to tinting. I got some nice tint from tint depot and I have no problems shrinking now 😁

@killedbyshadows1500

Жыл бұрын

I’m trying to tint my own car and possibly get into tinting other cars but I’m not sure where to even buy good tint. Do you have a link where I can get good quality tint? Like ceramic tint? I appreciate any feedback

I been doing auto glass for 9 years and started my auto glass company 3 years ago , I’ve had a lot of success thankfully and now I want to add tint to my service since I get so many request for tint been watching your videos and they are so helpful

Crazy well put together video Matt! I’ve had the same cart and have been trying to figure out how to trick it out, I love how you did yours. You’re killing it! Have a great year man

It looks like a carpenters pouch, Matt. Carpenter pouches are really very basic like that to hold a speed square, nails pencil tape measure. I used one of my old electric tool pouches that has a clip on the back side to just hook onto my belt or even one of my pants pockets. I didn't like it for electric tools so much, so I converted it to use with my tint tools, which I based off of what you use on your installs watching a lot of your livestreams. I hope you are staying busy through the winter there and you are settled into your new house for the winter. Glad I found your channel last spring; I picked up on window tinging pretty fast by watching your live streams. hope your classes are still going well!

Thanks for all that you do 🙏🏼. I just ordered some tools off your site

im an old school tinter 30 plus years off and on. So cool to see new tools

Just started tinting and your videos helped a lot 👍🏽

I am a Korean tenter. I'm enjoying watching your video. You look professional when you work..😀

Inspired me to become a tinter keep up the hard work !!

That plastic handle and squeege hybrid is the best man. I’m so glad you carry it!

@DetroitTintStudio

Жыл бұрын

Glad to hear it! Huge fan of that squeegee. Yea my store is almost all the stuff I use and basically nothing else lol

Thank you for the info

Good info thanks!

Hey Matt, very cool video, as always on top. when stream and video tinted rear window??

Hello, I'm from Brazil, my name is Elton, you wouldn't need people to work with you, I'd like to leave Bra, I've been working in the area here in the country for over 25 years, big hug.I really like your videos.

Hey. great video I was wondering which tools do you use to remove old window tint? I would like to see a video on how you do it! (I am unaware If you have one already)

Great video.. what are you using too wash your dirty microfiber towels?

I just ordered tools earlier today

Hi mat, what's the best side to use on the fusion hybrid, blue or orange?

Do you have or maybe make a video on how to use the green tail fin?

Would you recommend getting all of this starting out. If I will be doing mobile tinting?

Is a Milwaukee heat gun good for Tinting ? Looking for wireless heat gun if you got any suggestions.

Nice vid definetly gonna use some of these tools. Do you clay bar the defrosters on back windows on ever sedan or just the problematic ones ?

@DetroitTintStudio

Жыл бұрын

I use them on every defroster. Always takes a black residue off the grid before install and helps clean in between the lines

Please make vedio about best top 10 tint

Hi I have a question have you tried the scorpion tint?

Hey i was wondering if youll throw everything in kit fourm for us beginners

Hi mate, how to stop little contamination on rear window window, i do reverse roll. rest of car windows or quarter glass i do almost no contamination on it, can you please help me will much appreciate that

What brand do you use for customer vehicles? I’m starting to Learn by myself and want to know where to buy big tint rolls.

@killedbyshadows1500

Жыл бұрын

I’m trying to figure out the same thing

Thanks now I have clients for window tint.... 😀👍

@lfearless1819

Жыл бұрын

I got inspired from tintstuff he made yrs back

Matt, have you gotten an order on a Tint Buster backpack yet? Changes the game. Feel like my installs have gotten faster for some reason? Probably cus I’m not always looking for the hose it’s right on my tool belt.

@DetroitTintStudio

Жыл бұрын

I actually have one at my shop. I’ve used it on stream and yea it’s really nice!

Where did you buy the nonslip mats

What type of water in spray cylinder can you tell me plz,?🤔?

i still use those purple tintwiz tri edge cards lol

Can you drop a list with all these tools so that we can order it all with once button?

Do you ship products overseas to Dubai?

Where did you buy the floor under the car?

Do you recommend any tint schools in California?

Professional windows tinted

Get yourself a Truspray. You’ll never go back. We have 3 Truspray tanks

❤

How do u deal with the window rubbers that have that fur like material , it releases alot when water is applied , i would use a masking tape but is there anything better?

@DetroitTintStudio

Жыл бұрын

Yea masking or painters tape is terrible. Check out this stuff, it will stick no problem 313tint.com/products/seal-guard-for-covering-side-seals

One more question, when I do my final squeegee after I apply the tint which fusion squeegee do you recommend to get all those water bubbles out. (hard or soft squeegee?) I think I may be using too soft of a squeegee bc I'm left with a lot of water bubbles when I finish. Thank you again Matt!

@jaydenmarko166

Жыл бұрын

Always do hard squeegee last

@noahshepard7923

Жыл бұрын

Check out the Hybrid, it has both a Blue Max on one side and an Orange Crush on the other. I install Tint & PPF for a living, and i've been using it every day for years. Make sure you're doing overlapping passes. You might wanna try some more soap in your solution as well. Could be that you don't have enough slip, and it's drying out too fast. When you do your first soft pass, it should get all the visible water out. Then, on your second pass, you really wanna apply pressure to get everything you missed. I personally use a decent amount of pressure even on the first pass. Keep your other hand on the glass to hold your pattern in place so it doesn't slide all over the place when you start to squeegee.

@inoskex7725

Жыл бұрын

@@noahshepard7923 thanks so much!! This was really helpful! Much love 💚

@noahshepard7923

Жыл бұрын

@@inoskex7725 Anytime!

@TheSixStringGuy

10 ай бұрын

Excellent advice!

What happened to using the la awesome from the dollar store for the adhesive remover?

@DetroitTintStudio

Жыл бұрын

Nothing, still works great. I just also have been a long time user of ATR so I typically have both

How do you wash your towels? Use a specific detergent? Or none? Etc? How about drying the towels? Use dryer sheet or not to help it static cling?

@DetroitTintStudio

Жыл бұрын

I use a regular detergent with cold water but no fabric softeners. And dry on low heat with no dryer sheets. Heat will melt the fibers and dryer sheets/ fabric softener will coat the fibers in a wax.

Where do you get your glass aide at? The white one the skinny one

@DetroitTintStudio

Жыл бұрын

313Tint.com

Where can I purchase the glass aid white tape for the front windows and rear window

@DetroitTintStudio

Жыл бұрын

313Tint.com

What about the dollar tree cleaner?

What do you like better Apex or pronano as far as color and ease of working with.

@DetroitTintStudio

Жыл бұрын

Both are great 👍 apex is a dual layer ceramic and pronano is single layer. So it’s really based on price and what you wanna sell. No reason you couldn’t have both.

@MrRanger518

Жыл бұрын

Awesome. What one is easer to work with shrink?

hey matt, im thinking about switching from tint depot to GEO can you lend me some info? I want to know the difference between C2 Carbon and Pro Classic, anything can help. Thank you miss the live streams lolol.

@DetroitTintStudio

Жыл бұрын

Pro classic, really good color stable dyed film. The C2 has Carbon which helps block additional heat. Both look great both last a long time. The heat is the big difference. So when I sell films I sell Pro Classic, C2 carbon and Pronano Ceramic. Each film helps block more heat

@inoskex7725

Жыл бұрын

@@DetroitTintStudio Appreciate the help!!

What kind tape is that the white one where can I get those at?

@DetroitTintStudio

Жыл бұрын

Check out 313Tint.com it’s all there

Matt I’m new to the window tinting industry I’m in Chicago so weather is cold my question is how hard do I have to squeegee out the tint after putting it on to squeegee all the water out for the next day I don’t get water bubbles if anyone can help me with that really appreciate it

@DetroitTintStudio

Жыл бұрын

You really don’t have to push hard. Some water will always be there and it will dry out even in freezing weather. I’m in Michigan, it’s not a problem to worry about. Just give it a little time. I tell people up to a week

Nich

Where did you get your flooring?

@DetroitTintStudio

Жыл бұрын

Racedeck.com

can I buy some dirty glass aid ?

@DetroitTintStudio

Жыл бұрын

😂 maybe I’ll run a special one day.

@alpaka9408

Жыл бұрын

@@DetroitTintStudio awesome 🤣

If it not broken don't fix it... sane tools for 20 yrs

Actually, The Stroke Doctor looks like it has the longer longer blade