Thanks Brother for putting this video out. Had no idea about Dove mounts...lol I was looking at picking up a new pistol that comes with optics ready...you saved me some cash👍

@jeffofalltrades8489

7 ай бұрын

Glad I could help, my friend!

Great video, I've spent hundreds of dollars having slides milled. This makes a huge difference. Wow!!

@jeffofalltrades8489

10 ай бұрын

I'm glad you like it!!!

Thank you for posting this video. This is a great alternative to buying an aftermarket milled slide for an optic.

@sergiouvalli7122

5 ай бұрын

will this work on my g3 taurus

@franksmith8210

4 ай бұрын

A milled Glock 19 slide is $100... Just buy the damn thing.

Thanks for the video. Perfect timing. Just stumbled across this video while researching optics for my Glock.

@jeffofalltrades8489

Жыл бұрын

Thank you for the support!

Learn something new everyday. I'll be doing some more research on these.

@jeffofalltrades8489

6 ай бұрын

I have another video on this showing the true strength and reliability of these. Check out my channel for the full torture test

I was about to mill out my S&W Shield glad I found this vid. Thank You.

@jeffofalltrades8489

4 ай бұрын

That's great!

I figured out how to set these plates up a while back. The light shining thru is fine. However if you notice, the gap is smaller at the front than the back. Basically your plate is sitting at an angle. I guess thats fine. But i like my stuff level. This is my way of doing it. To install ANY of these dove tail plates correctly. 1). You must know that the front screws are also to be used as set screws. Which adjust the front of the plate up/down. 2) Insert the plate as normal. 3). (Using blue loktite)screw in the dove tail set screw but do not tighten with pressure.4) while looking at the gap with a light (blue loktite)Screw in front set screw(s) until the gap from front to back is equal. 5). slightly Tighten down the dove tail set screw. then while checking alignment and gap slightly tighten down the front set screws. The loktite and optic should keep the front set screws from moving any direction.

Thanks for the information. Ive had a different mount on my 43 but wasn't happy with it. I went to the Dove sight and entered your code and its on its way! Thanks again.

Today I learn a lot with you. Thanks for your patience teaching others. That will help others safe a lot of money milling or buy new sliders

@jeffofalltrades8489

10 ай бұрын

Glad you like it! Thanks for the support!

You can tell how much more popular red dots are becoming. I have a G19, it was a non MOS version, but I bought a MOS slide later on and use that slide on that gun now. I got the complete slide, striker and everything for about $150. Have a Holosun installed on it. Works great. I have tried looking for a G43X MOS Slide and people want $500 for one. I can get an entire gun for that price LOL. And that is probably what I will end up doing. Probably see if my local shop will give me a decent amount for my old G43X and if not just keep both of them. Would need night sights again though. Not a cheap hobby.

@jeffofalltrades8489

Жыл бұрын

You should look into the Shield sight. I just made a stress test video on it and it impressed the hell out of me! Dovemounts sells that sight too so if you used my code you'd also get 10% off of that, if thats what you're looking for!!

@Dressed2KillTaye

Жыл бұрын

Get a precut slide...

@reddolf2489

10 ай бұрын

where did you buy your precut slide at?

@davva360

10 ай бұрын

@@reddolf2489 Bought it on Gunbroker but it was a few years back now. Like i said i am not seeing them at that price anymore. People want so much for them now you may as well buy another gun.

@dreday6320

7 ай бұрын

😂😂😂😂 that's exactly what I said. I could just buy another gun at that price lol

At least 20 years ago or so, I designed and made an effective optics adapter that attached to the pistol via the 2 screws that held one of the scales on the grip (the pistol involved had no rails on which to affix any sight or light). The adapter was a kind of twisted "L" shape. That mounting method also reduces to a major degree the shock impulse put on the optics as the optics don't move with the slide. If desired, it can allow for co-witnessing as well by just optionally lengthening the adapter a bit to locate the optics mounting rail leaving an air gap of about 5mm above the slide. The downside of course, was that the part of the adapter that attaches to the pistol has to be custom designed to fit in place of the scale it replaced. The alternative design just provided a "universal" mounting extension that instead sat on top of the existing scale (still using the scale's mounting screw points but slightly longer screws), which increased the width of the overall grip by about 2mm which could be an issue with some pistols and people with smaller hands...and it felt "rougher" to the hand. But the mounting extension could be pre-drilled to accomodate several common pistol scale mounting screw layouts for different pistols. I preferred my custom adapter that replaced the right-hand scale on that particular pistol. One also had to ensure the ejection port wasn't affected. It also wasn't ambidextrous...it would have had to have 2 models: one for left hand and one for right hand pistols/mounting. edit to add: probably wouldn't be feasible on a modern plastic frame pistol as any screw holes tapped for the optics adapter into the frame would likely deform with use and time, and could negatively affect the mechanical functionality of the frame.

Great video brother! One suggestion, investment sight pusher. You will find it to be invaluable and you can get a decent one for like 45 bucks. You can actually get a really good one for around 45 bucks. Just throwing it out there brother keep up the good work!

@jeffofalltrades8489

10 ай бұрын

Thanks for the idea and support

@dovemounts8840

10 ай бұрын

We don't recommend using a sight pusher with our design, as it can damage the threaded posts where the optic attaches if done incorrectly.

Love the optic solution sans milling! Thank you!

@jeffofalltrades8489

5 ай бұрын

That's great! Thank you for the kind words!! Happy shooting my friend :)

Perfect for my OG Gen1 GLOCK 17.

There are a few videos on the net regarding the Dove Dot mount, but by far your video is the best - very casual, yet professional and very informative with a step by step tutorial. Thank you Dovemounts for an excellent product, and thank you Jeff for an excellent tutorial. Unfortunately I'm from South Africa and with our poor rand to dollar exchange (R18.8049 to 1$) I cannot afford to purchase the dove dot mount currently. Will have to save up and purchase in the near future. Hopefully the night site version will be out by then.

@jeffofalltrades8489

11 ай бұрын

The night sight is out now!!! I am planning on making a small video on it, but its fantastic! If you like the Dove mount .... I just finished edited a video STRESSING THIS MOUNT as far as I could ... make sure you're subscribed to see it, you wont want to miss it! Thank you very much for the support!!

Wow .. excellent idea , thank you 👏 So , I don't need to retire my 26 year old former service G19 Gen3 🇺🇸💙🇺🇸

I was excited to see this until I went to the website and found a very limited variety of guns the dove dot is compatible with. Sure would love this for a FN FiveSeveN MKI.

@scottswan3722

2 ай бұрын

Would have liked to see one for my Sig 320

Jeff it is not really necessary to take the gun to the range to confirm sight alignment. Get a 9mm laser boresight cartridge such as those made by Sightmark. You can verify the alignment by measuring off 10 yards and verify that the laser "red dot" is on top of your front sight or slightly covered by the front sight. I use this method to initially align Crimson Trace laser sights for 10 yards.

@jeffofalltrades8489

Жыл бұрын

Yeah but why not shoot if you can shoot??

@stebbinsgr1

Жыл бұрын

@@jeffofalltrades8489 I rarely take someone else's gun to the range. If it is mine, then I would go shoot.

@DZheng808

Жыл бұрын

thank you!!!! ill do this

@alecubudulecu

Жыл бұрын

this will get you "close" but you do need to zero it ultimately

@jeffofalltrades8489

Жыл бұрын

@@alecubudulecu yes!!!!!

Love the idea of the Dovetail/Novak Dot - just wish they made one for other footprints.

Thank you Jeff for this amazing video! Definitely worth trying out instead of milling the slide. I decided to put an order in and used your coupon code, thanks. 😁

@jeffofalltrades8489

Жыл бұрын

Awesome man let me know how you like it! Thanks so much for the support!

@davidpignatore6532

11 ай бұрын

Did you get the kit? How is it?

@JdmSana

11 ай бұрын

@@davidpignatore6532Sorry for a late reply. Yes I did get the kit, and it was well packaged and fit on my firearm perfectly with my red dot. Definitely recommend to anyone who doesn’t want to mill there slide.

@JdmSana

11 ай бұрын

⁠@@jeffofalltrades8489I love the mounting plate! 😁 I’ve owned it about 3-4 months now and it’s amazing! Shot 1,000 rds with my firearm at the range and it’s never moved out of place or anything, stays intact with no issues. I love it! 😁

@davidpignatore6532

11 ай бұрын

@@JdmSana all good brotha. Thanks for the reply

Wow, total game changer. I was just thinking about how I got a PSA dagger that comes with RMR cut. I love that pistol because of the red dot. I am not wanting a red dot on my P365 edc but was worried about losing my ass on trading in for an optics cut version. Thia seems like a great way to swap the sights without gun smithing fee. And you can change back to OEM sights if you ever sell. Whereas milling the slide could ruin trade in value. Not that i sell any of my guns lol...

Just installed a dove dot on my Arex Zero 2s absolutely love it best thing ever 😊

Bro. I found ur other vid legit 10 min ago and you posted this 13 min ago😂

@jeffofalltrades8489

Жыл бұрын

Well how about that for timing lol I'm glad you found this one!!! Big improvements here!

@freeandcriticalthinker4431

Жыл бұрын

@@jeffofalltrades8489 dude do you not get what he is talking about? You vastly improved your gun in 3 mins? Or just recorded two videos back to back and uploaded them

@jeffofalltrades8489

Жыл бұрын

@@freeandcriticalthinker4431 those two videos are recorded years apart ....

@NorthwestGuitarworks

Жыл бұрын

@@freeandcriticalthinker4431reread the first comment you’re misunderstanding

@zombielover317able

10 ай бұрын

Damn random comment guy you can take his testicles were right out of your mouth and stop brown-nosing are you trying to get a date or something what the hell are we doing here 😂😂😂😂😂

1/8 of an inch off a 4 inch barrel pulls your shot 2 and 1/2 inch off center at 10 ft and 1/16 puts it at 1 inch and 1/4. I hope to God that the outside company's keeping it closer to 1/64 if not better even that moves your shot 1 inch at 32 ft more or less 10 yards. This is a good video and I believe in putting your life in your hands and not someone who sees you as a number.

good to learn that taking your gun to a gunsmith for this is not an absolute. Because I had planned on going that route and being charged $100.00

I just found your site and I’m glad I did. I purchased two of the Dove products. Thank you so much. Your discount code was great 👍🏽

@jeffofalltrades8489

10 ай бұрын

That's good to hear!! Thanks very much for the support, it means a lot! Let me know how you like them

This is awesome, very very good option vs milling your slide. Just make sure you test for reliability as the added weight may affect some of your lighter defensive loads. I will be considering this for my G19 :).

@jeffofalltrades8489

Жыл бұрын

It has been tested and put through some high test. I have not tested lighter loads though! With how small this attachment is though, I would be surprised if it effected anything

@Balenciaga_Baby

Жыл бұрын

I actually contacted dove asking that question. They said they’ve actually ran the dove mount shooting .22 with little issue. I was asking if I’d have functionality issues running this on my Glock 42 (380) and they said “definitely not” and added even shooting 85gr had no issues with functionality. Hope that answers your question and anyone else that might have the same question.

@dovemounts8840

Жыл бұрын

You wont see any decrease in performance due to added weight. Definitely not with defensive loads, and definitely not until you start getting into .22lr territory.

@calid.

9 ай бұрын

@@jeffofalltrades8489i wish you would have shown what it looks like now when you look into the optic

I needed a mounting system and a lot of better red dots. I wasn't looking for them. I needed the lights first. I'm not sure how you popped up on my suggestions page but I'm glad I found you. I hope they have the plates for my pistols. I'll find out soon enough. You make very good videos. Good luck on growing your channel.

@jeffofalltrades8489

10 ай бұрын

Thank you for the kind words and support!

Awesome having front sight Infront of the dot to. Doesn't block the dot. Becoming a lot more popular. Even milling front site doves Infront of the dots now. This is cool

@jeffofalltrades8489

Жыл бұрын

I love it man, it really is the best of all worlds

Thank you, Jeff. I love my Glock 43 and now will love it more now that I can put this mount on and get a Red Dot. Great Video!!

@jeffofalltrades8489

10 ай бұрын

I'm glad you like it!! Check out the torture test video I did on this thing. Its wild ... if you plan on throwing your gun into the ground, rest assured it will hold zero!

Very useful video!!! I was a little concern because a lot of people telling me - oh you should buy the optic ready version you are screw now- but this dove mount is awesome!!

@jeffofalltrades8489

11 ай бұрын

This was made for people like you! Or people that bought a gun years ago, and now want to add a red dot!! I did a full torture test on this thing, and it didn't budge! It's amazing. Check it out! It's on my channel

Man! This is awesome. I watched your 1st vid on the other plate and I thought that was so cool, but this product is waaay better👏🏽👏🏽👏🏽

@jeffofalltrades8489

Жыл бұрын

Good I'm glad to hear it! Thanks for the support!

this is great! i am so glad i stumbled upon your channel. I'm going to do this to couple of my glocks and my shield. you sir, have earned a subscriber.

Searching for something else, this video popped up on my feed and I just ordered 2 of them for my Glocks because of you, lol. Just like you mentioned, I don’t really trust sending my stuff away. Thanks for the video.

@jeffofalltrades8489

10 ай бұрын

I'm happy to hear that! I did a full torture test on these things too and it performed great! You should check out that video. It was really fun to make lol

@MyDudeEd

10 ай бұрын

@@jeffofalltrades8489 just watched that torture video and was like this guy is nuts! None the less, you got my subscription. Thank you again for the video. I know now that I’ve made a good investment.

Normally it's hard to sit through some vids, but, this was worth the Subscribe. Definitely a option I'll have to give a try.

@jeffofalltrades8489

5 ай бұрын

I appreciate the kind words! Thank you my friend!

I was on the fence with dovetail. Sae this video of the simplicity of it, and I thank you.

@jeffofalltrades8489

10 ай бұрын

I'm glad I could help!

This was worth the wait like you said on the last video. Thank you again!

@jeffofalltrades8489

Жыл бұрын

Not a problem! If you haven't purchased yet, make sure you use the code! 10% off !!

I had the dpp plate and i absolutely hated it. Always was maxing out my dot like you said. I LITERALLY SENT MY SLIDE TO GET MILLED A COUNTRY DAYS AGO. If I saw this I would have tried it. Damn it lol

@jeffofalltrades8489

3 ай бұрын

I wish you would have!! That DPP plate was .... OK at best ... but you get what you pay for! I'm glad you got your slide milled though, at least you can shoot now! Lol

After watching your video I ordered one and used your discount code. I just received it today and will install it tomorrow. The quality looks good. I'll test it out next weekend.

@WanderingBobAK

5 ай бұрын

and?

@VABLM757

4 ай бұрын

How it turn out ?

WAIT WHAT!! this is awesome!!

Placed my order immediately after watching your video and used your code! Thanks Jeff!

@thomasl2193

9 ай бұрын

What code, didn't see any

@cameronmartin4159

9 ай бұрын

@@thomasl2193he talks about his code in the video. Code is Jeff10 I believe

Jeff good day. Brilliant video. Do you have recommendations for Glock 43x appendix carry holster that will go with the dove mount pared with a Holosun product… Thanks in advance

Wow! This is a good idea. I have several pistols I could upgrade using this. Money is tight. Cannot justify spending more money on new guns in order to get a red dot.

@jeffofalltrades8489

10 ай бұрын

This is for people like you!!! I love the idea of taking a gun you've had for years and years, but now you want to upgrade and put a nice red dot on it...you've earned it! thats what this is for. I'm glad I could help, and I hope (if you buy it) you enjoy it! Let me know what you think

@sisleymichael

10 ай бұрын

@@jeffofalltrades8489 Sure will.

hi jeff!! Im about to join you in promoting Dove mounts and im so excited! Thanks for the great video! I went ahead and subbed to keep up with you, Im a fairly new guntuber its nice to meet you!

Good concept. Maybe I'm a cheapskate, but I thought $85 (less your discount, + shipping) was a bit high. I'll probably still order one though.

In my opinion: The sidearm is supposed to be a lower fire rate but more accurate The larger gun is supposed to be for free fire, no care in the world But you'll just say that's an opinion

One thing to add. removing the old front and rear sights can and will be veery difficult without a sight adjustment tool. Those sights are wedged in very tight.

@jeffofalltrades8489

10 ай бұрын

Not true. The only rear dove sight that is almost IMPOSSIBLE to remove is the Smith and Wesson (not all models). Glock can be done with a screw driver and a soft mallet if needed. A punch and a slide wedge works great too! I wouldn't recommend a sight pusher Front sight is as easy as getting a $2.00 tool from Amazon (Front sight removal tool)

Very clean presentation. Music at just the right volume.

This is not better than mounting a red dot sight into a purpose milled slide. The cut slide is much stronger mounting, sits lower and does allow co-witness of the sights.

Great, informative video. I'll admit that I'm not personally sold on the idea of pistol optics and I greatly prefer irons(I have shot a few with dots), but this looks like a great one to get if I want to try it at some point without having my slides cut or buying an MOS Glock. I'll absolutely keep the Dove system in mind if I want to give it a go sometime.

@jeffofalltrades8489

6 ай бұрын

That's the great part of this product IMO...it's reversible! It really is nice to put a red dot on any gun, and if you want to go back to Iron Sights, it's easy to do

Good info Sir . If l ever do that type of sight I will do what you did .

Great video, you are clear and concise. I love the product and would like to have some but they are out of stock and out of stock or on backorder. I know how business works so I'm not really mad, but I do hate when I finally find a great product and can't get it. I'm new to your videos and I'll be watching more.

@jeffofalltrades8489

10 ай бұрын

These are great, and people have taken notice. It's a great thing for business! But unfortunately they are out of stock. I can say they restock quickly and always make it known when they have them back!! I recommend adding their Instagram and they usllay update people there

Nice - I would use the tiniest drop of SuperGlue to fasten the optic fibre sight

@jeffofalltrades8489

Ай бұрын

@@keithduffield5239 not needed! It's melted plastic, it doesn't move at all

Did adding the optic make it where your holster no longer worked. With these adapter plates and optic it looks as if the optic sit back far enough not to mess with a holster that is not set up for an optic. What’s is your experience. Did you have to buy a new holster or modify one?

@jeffofalltrades8489

8 ай бұрын

You will need a new holster to accommodate the taller front sight. The mount itself and the optic do not get in the way.

@believeinjesus8300

8 ай бұрын

@@jeffofalltrades8489 thank you

Awesome, thank you so much! Just installed on my s&w 2.0.

@jeffofalltrades8489

4 ай бұрын

Awesome!!! I love that gun

@davidknights2535

4 ай бұрын

How is it going since installation?

@jeffofalltrades8489

4 ай бұрын

@@davidknights2535 you should really check out the torture test video I made on this mount....this thing doesn't move...

They are working on a Night Sight version...Looking forward to it!

@Ricky-ix5yt

11 ай бұрын

Great product. I see on their web site they now offer tritium front sights. Just a thought - would it be possible to manufacture a mini or micro tritium vial to be inserted into the rear sight with the current design. If the sight had to be thicker to cater for a vial, the plate may have to be longer and may not be ideal for stability as only the dove tail secures it to the slide and maybe prone to mild vibration thereafter. It is opinionated but I think tritium is currently the best in night sights. Well, since they made such a great product first time round, I'm sure they will do well with the night site version. Just by the way, I am from South Africa and love the product. With our rand to dollar exchange (R18.8049 to 1$) which is expensive for us in South Africa. On my wish list though.

I'd like something like that for an Aimpoint Acro. A dovetail adapter plate with co-witness iron sights.

FANTASTIC!!

$100 for just a plate😂😂😂😂Looks like cutting the slide is same money if not cheaper 😊

Just ordered one for my gen 3 g19. 66 left in stock and coupon code still works

@jeffofalltrades8489

3 ай бұрын

It always will!! Amazing product, I wanna get you deals too!! I have 5% off that Shield sight optic too if you're interested ;)

This product is thinner and still has a gap. My common sense makes me think it is structurally not as strong. Wouldn’t it be better if there was zero gap? Maybe the gap issue could be solved by tailoring the dove dot adapter to each manufacturer rather than one size fits most. Also this adapter is more than twice the cost. I’m pretty sure the gap can be eliminated. Once you do a review with zero gap, I’m going to buy one. Thanks for the excellent review. I’m subscribing hoping to see a new review when the gap is eliminated.

Wish I knew about this before I bought another slide for my Glock 19

@jeffofalltrades8489

Жыл бұрын

That gets expensive! I love this option because it's reversible and affordable! Even if you don't need the plate, the offer a few other great products that might be right up your alley! I'll be making a video on the red dots soon !!!

@tateharriman8125

Жыл бұрын

You can always use this on the slide that isn't milled!

@WanderingBobAK

5 ай бұрын

@@tateharriman8125 Yeah, that's the point, I think.

Awesome product but personally I just like a milled slide where the optic sits lower

I have the Holosun SCS MOS monted on my G45 MOS, no plate, direct fit. green multi reticle. No Battery to replace. I have the SCS P320 mounted on my Sig P320 Carry.

@martinmaddox5315

4 ай бұрын

I assume it’s solar. Is it bright enough even on cloudy days? Thanks.

Really is genius simplicity at its best! Sold!

@jeffofalltrades8489

6 ай бұрын

Back in stock!!!

Glock kits out of stock and no Sig kits listed.

Any updates on holding zero after a few hundred rounds down range? Also durability with rough use?

@dovemounts8840

Жыл бұрын

Torture test coming soon!

@jeffofalltrades8489

Жыл бұрын

500 rounds done so far .... still holding 0. I also "Accidentally " hit it with a hammer .... still going strong! Stay tuned for the full torture test!!!

Personally dont care about the co witness (only using it at the range as carrying in public is illegal in the Netherlands), but besides that its a pretty nice solution to a design issue on Glocks side😂

Great clear instructions. Thank you.

@jeffofalltrades8489

11 күн бұрын

@@pellcio so glad I could help!! Thank you for the support

Great demo ! looks like a nice system for one of my guns , thanks

@jeffofalltrades8489

Жыл бұрын

Thank you for the support man! It means the world to me

@cjsierra4498

Жыл бұрын

@@jeffofalltrades8489 hey Jeff what’s up!.. great review btw, I’m wanting to get the dove dot as well but I don’t like the fiber optic sights, I was wondering if you could measure the height of the front sight?? Or if you know would a night fision front sight co-witness with the dove dot plate as well?… I just don’t like the look of fiber front sights and would rather purchase a regular front sight that works with the dove dot… thank you!

@jeffofalltrades8489

Жыл бұрын

@CJ Sierra .365" on Glock, Night Fision suppressor height irons will work fantastic. Thanks for the support!

@cjsierra4498

Жыл бұрын

Thanks for the reply!

Nice video. It’s ok about showing if the weapon is clear. You know what you’re doing, plus my iPad won’t let a stray bullet come through.

@WanderingBobAK

5 ай бұрын

Bahaha! It always made me laugh when people clear their guns. I do feel safer and no longer have to duck to avoid NDs

Great video! Very helpfull ! Thank you Jeff!

Man this is awesome now I can stick with my Gen 2 Glock! Thanks, I just stumbled onto your channel but you just gained a new sub also.

@jeffofalltrades8489

4 ай бұрын

I appreciate it my friend!! Let me know how it works out for you!!

Looks great! I have been looking to mount one to my Glock 19.

@jeffofalltrades8489

10 ай бұрын

You should!

When you buy a slide, buy a slide that is precut for your optic!

@dovemounts8840

Жыл бұрын

Unless that option isn't available. Several other models other than Glock!

@jeffofalltrades8489

10 ай бұрын

What if you got a gun from someone that doesn't have a cut slide?

Awesome I have a glock 19 gen 4 and was wanting to put red dot on it but didn't want to have slide milled so I even was going to buy a mos slide. But now thanks to your video I see that this option will work for me. I went to dove website but they are out of the dove mount that comes with the triglow front sight. I guess I'll have to wait for it to be in stocks again. So u recommend the Holson sight?

Best video I've seen on red dots, great job

@jeffofalltrades8489

9 ай бұрын

Glad you liked my friend! Happy shooting!

cool idea, but I really want different plates like an RMR so this wouldn't work for me yet. possibly there could be problems but swapping optics would be cool

Thinner mounting plate also means it is easier to find the dot.

@jeffofalltrades8489

10 ай бұрын

You got it!

Excellent video, thanks for sharing this video.

@jeffofalltrades8489

11 ай бұрын

I just did a full torture test on it! And it worked great! Go check it out

Dude I wish u know how much head ache you have saved me

Loved that plate, but maybe it's only me? Where is the link to it? Sorry for dumb question.

Much appreciated effort! Thank you for sharing, I didn't know such product is available. Could you please make a video how is it a year later? Also is this also for G26?

@jeffofalltrades8489

Ай бұрын

@@realzeti ALL glock models and I still use it to this day!!!

Whelp.. I’ve got my Holosun EPS carry sitting here waiting on the Dove mount.. hope it’s worth the wait because it’s been one heck of a wait.

Excellent video. Clearly explained, filmed and edited. Used your code to get 10% off. Thank you!

@jeffofalltrades8489

Ай бұрын

Thanks for the support!

The intro is powerful

Nice content bro, very informative 👌🏽 Are there any cons for the dove dot besides the dot sitting a little higher than it normally would with a milled slide or optic cut? Im considering getting one intead of sending my slide to get milled.

I was excited till I saw the fiber optic front site. I have broken many of those out. They are not durable to say the least. Just a plain old plate with no built-in rear site would be nice and then I could install my own sites.

@jeffofalltrades8489

5 ай бұрын

Or upgrade and get the tritium night Sights!

Excellent product and excellent representation and excellent instruction and walk through video excellent job bro.

@jeffofalltrades8489

10 ай бұрын

I really appreciate that feedback Steve! Thanks very much for the kind words. Happy shooting!

Thank you bro!!🍻🥳

@jeffofalltrades8489

Күн бұрын

@@georgegonzales2823 any time! Glad you enjoyed

@georgegonzales2823

Күн бұрын

@@jeffofalltrades8489 I’m trying to find it. Amazon just has a whole bunch of garbage.

GREAT VIDEO! THANK YOU! The music is awesome. Remimds me of Khruangbin

What about the Taurus Gx4 or Tarurus TH 9 or A Beretta 92 FS?? Aye??

@truthseeking3818

6 ай бұрын

The only actual gun you listed there was the Beretta. Taurus might as well be a hi-point.

Great product. Thanks for sharing.

@jeffofalltrades8489

9 ай бұрын

Thanks for the support!

You think this would fit on my fnp 45 the slots look similar I don't have a Glock to compare tho so I'm not sure it will fit

Jeff, I went to the site and only see a few Glocks and S&Ws it will work with. The selection doesn't do me any good. I would use on an HnK or Walther to start more expensive weapons with more expensive slide work. So many people do Glocks and S&W I think it's over priced for them. Just my opinion and I'm no pro.

Nice review. No fluff.

outdamnstanding Jeff...getting one today...thank you...

@jeffofalltrades8489

7 ай бұрын

Thank you for the kind words!

Can you figure out a way to mount a red dot up front where the front sight is, so that it should be super easy to find the red dot. It should be even easier than finding iron front sight. Mounting a red dot in the rear is a very poor design that only helps finding a holster at the cost of making it so difficult to find the red dot when shooting. I think that the red dot should be mounted up front.

I tried to check them out, unfortunately they do not make one for my Taurus TH9c

Wow that was a awesome video thank you

@jeffofalltrades8489

Жыл бұрын

Glad you like it!! Thanks for the support!