Great video for new cobra owners!

Absolutely gorgeous car! I had a 96 cobra back in the day. 03-04 is my dream car. Hopefully I’ll have one after I finish flight school. You’ve got the best looking cobra I’ve ever seen! Nice job.

@KyleSVT

5 жыл бұрын

Thanks Thomas!

Very nice! Still my favorite 03 / 04 Cobra on youtube. The 04 Interior with the torch red is just perfect. Jaeger wrenching's comp orange is a close second though.

@KyleSVT

5 жыл бұрын

Thanks brother!

I bought my '03 convertible brand new from the factory to go with my '99 Cobra convertible. My only mods have been an MGW shifter, Maximum Motorsports IRS urethane bushings, 3.73 rear gears and a Centerforce clutch. I never thought that the clutch was too stiff to begin with, but I replaced mine at 80,000 miles while it still had some life left. I took off the silencer and put in a K&N filter and that has been it. I take it out east a couple of times a year and I like the stock exhaust because it is fairly quiet on the turnpike. It still runs great after all these years with no problems.

Can’t get enough of your cobra videos mayne 🔥 beautiful car

@KyleSVT

4 жыл бұрын

Thanks brother I really appreciate it!

Your video was awesome man. Informative and just great. I have an 04 slightly modded and need to know what to do next this helped a lot! Thank you

@KyleSVT

4 жыл бұрын

Thanks brother! Glad you enjoyed it!

Rode in my buddy’s cobra after it was built back in like 09, was pushing over 700hp when he was done, and he still had stock brakes, scariest ride I ever went on. Lot of people forget brakes as a upgrade and they are one of the most important things you can do once you start increasing hp.

Great video perfect mods and details on why you did them. Gives me some ideas for my Mach 1

@KyleSVT

4 жыл бұрын

Thanks brother! Very cool! I love Mach 1s. what color is yours?

Thanks for the informative video! Not a cobra owner yet but crossing my fingers i will be one within a month or so!

@KyleSVT

5 жыл бұрын

thanks for watching it! very cool!

@davidproangler6258

4 жыл бұрын

Ass Muncher407 did you get it?

As usual, great video!

@KyleSVT

5 жыл бұрын

Thanks bro!

Thank you for the video Just picked up a 2004 Cobra 🐍!! This is very helpful

@KyleSVT

4 жыл бұрын

Very cool bro! Congrats!

@striker_svt15

4 жыл бұрын

KyleSVT thank you man ! Just ordered the BF pulley with the aux idler kit !

Great video. I also have a 2003 Cobra and I’m the first owner. I’m running flowmaster one chambers, high flow basssni x pipe, Steeda cold air, Steeda short throw shifter, Eibach springs.

@KyleSVT

3 жыл бұрын

Thank you!

Just picked up a 2004 screaming yellow this week w/ 18k miles. It's stock except a cat back, MAF, tb, and 2.81 pulley. Definitely doing the FTBR bushings as soon as I can.

@KyleSVT

5 жыл бұрын

Very cool! Congrats! Your gonna love the bushings!

@andrewcbr929

5 жыл бұрын

KyleSVT did you order your bushings directly from FTBR or did you get them through another source?

@KyleSVT

5 жыл бұрын

Bought them direct from FTBR

These things still hold its resale value pretty well average cost of $20k for the 2003 and up.

@user-pf6wl4hv5j

2 жыл бұрын

Wish they were still 20k I’d be in one oh well swapping a 03 top end on a bullitt fuck it sra anyway

Excellent video thanks!!

@KyleSVT

4 жыл бұрын

Thanks for watching!

Awesome Video great mods.👍💪

@KyleSVT

5 жыл бұрын

thank you!

Great video thank you!

@KyleSVT

3 жыл бұрын

Thanks for watching

Very nice mods, I think they bring the car together well

@KyleSVT

5 жыл бұрын

Thank you!

love Your video's

Nice and clean dude

@KyleSVT

3 жыл бұрын

Thanks brother

Thumbs up over here 👍🏽

@KyleSVT

4 жыл бұрын

Thanks!

I did brushed metal, cool part is when someone is behind you the word cobra projects to the ground.

@KyleSVT

5 жыл бұрын

Nice dude!

Great video....just snagged a 2003!!!

@KyleSVT

2 жыл бұрын

Thank you! Very cool

Beautyful cobra 👌

@KyleSVT

5 жыл бұрын

Thanks brother!

Hey Kyle, very cool video. Funny I have a TJ and a Cobra as well. Can you link to the heavy duty Bilstein shocks you used? Thanks!

@KyleSVT

5 жыл бұрын

Thanks bro! Very cool! fulltiltboogieracing.com/1999-2004_Cobra_Suspension_Parts_and_Tools.htm

Great video

@KyleSVT

5 жыл бұрын

Thanks Josh!

I'd sell my soul just to sit in that car. 10/10

Beautiful car men

@KyleSVT

4 жыл бұрын

Thank you!

Mid pipe and idlers pullies are needed as well

Extreme grippy tires for a quick canyon run

My dad bought his 03 cobra brand new and he took it to a place called alternative performance and had the blower ported had nitrous put on it and some other stuff I don’t know about right now

I have the same set up but I have a whipple 2.9 and return style fuel system

One thing you did forgot is the cooling mod the rear cylinder heads drivers side and passengers side the stock cooling system doesn't get enough coolent 2 them and u slowly start losing compression..had to get my cylinder honed and new rings same thing happened to my father's we both have 03's

1st video I watch need to too subscribe .

You should've started out by suggesting to replace spark plugs with a colder plug, fuel filter replaced, bigger MAF, and check intercooler pumps function before upgrading the pulley or anything else....

On your clutch setup did you install an adjustable pivot stud? If so how much shorter did you make it from oem

@KyleSVT

5 жыл бұрын

Yes adjustable. I don't remeber sorry man

Hey bro can you put a mod list in the description or comments?? New sub by the way!!

@KyleSVT

4 жыл бұрын

Thanks for subscribing brother! Here is a video where I go over all the mods on the cobra kzread.info/dash/bejne/o5qGrslqlrqvmag.html

Wish you put a mods list in the description.

Hey Kyle, do you only have the front brakes upgraded? Thanks!

@KyleSVT

5 жыл бұрын

Hey Marlo! No I am now running an upgraded rear setup

Slick car! How much HP do you expect to push with the smaller pulley, proper tune? Stock Cobra's get just under 400HP, so I assume it's closer to 425 HP with those mods, if not more? Again, slick car! You've clearly taken care of this vehicle. I have seen tons of Mustangs from this era in my area and most are in poor condition.

@KyleSVT

5 жыл бұрын

Thanks brother. With my mods I'm at 445hp and 462tq with pulley tune cai and catback exhaust

@RK-ci9nn

5 жыл бұрын

@@KyleSVT Nice! That's some real power, and you haven't exactly done anything to lessen life-span of the vehicle. Love the red and black! I like either that or White and Black. Rims really stand out on this vehicle, but in a good way.

Did you grind down your IRS bolt when you upgraded to 18" wheels?

@KyleSVT

5 жыл бұрын

yes sir!

I have a 03 cobra and if im not mistaken I noticed you have the 18in saleen rims on yours. Will the stock SVT center cap fit the saleen rims? If not how did you get the SVT center caps to fit yours. Thanks!

@KyleSVT

5 жыл бұрын

So I ordered my wheels from oe wheels and the center caps needed a little bit of dum dum putty to make them fit perfect

@kylegreene2253

5 жыл бұрын

@@KyleSVT Thanks!

@KyleSVT

5 жыл бұрын

no problem!

Would you recommend an idler for a 2.8 pulley? If so a 90 mm or 100 mm?

@KyleSVT

2 жыл бұрын

Yea I probably would put an snub idler on it. Not sure on size tho

I have those same wheels in chrome, did you have to get yours powder coat or did they came like that

@KyleSVT

5 жыл бұрын

I ordered them in black

If I upgrade the pully will the engine be a risk since it’s making more boost? Will I need engine mods before upping the boost

@KyleSVT

3 жыл бұрын

I would get a tune so it is safe

Alex Svt watched this

Where'd you get your blacked out badges?

@KyleSVT

Жыл бұрын

kzread.info/dash/bejne/inyZvLOJeLbFl5s.html

How much boost are you seeing with the 2.76?

@KyleSVT

5 жыл бұрын

Think I'm around 12-14psi

Hey Kyle. I’m 16 and in the market for a used car. I’m fixed on a Manual Mustang. And I found a Terminator Cobra. You think I should go for it??

@KyleSVT

5 жыл бұрын

Hey Gavin! If you can afford the cobra absolutely get it! You won't regret it

@BboyIllusi0n

5 жыл бұрын

I mean I guess nothing wrong with age just please take really good care of it lol. When you get older you’ll appreciate the car and know that you’re buying a legendary piece of ford SVT history. I’m in the market for a black coupe as well. I’ve owned my GT for 8 years but I’ve always wanted a Cobra.

Bro what about an 01 cobra you think you can do a vid about that or na

@KyleSVT

5 жыл бұрын

Yea I have a buddy with one actally!

cat delete is a must. ang

Where u get auxiliary idler

@KyleSVT

Жыл бұрын

I called billetflow and ordered over the phone

With the 2.76 supercharger pulley what size idler pulley did you go with? 100mm?

@KyleSVT

4 жыл бұрын

you talking about the snub idler?

@desiconcepts9095

4 жыл бұрын

Yea bro, I see they have a 90mm and a 100mm snub idler on American muscle

@KyleSVT

4 жыл бұрын

@@desiconcepts9095 mine is 100mm

@desiconcepts9095

4 жыл бұрын

Thank you for the info bro. I seriously picked up my 03 terminator vert after watching your videos. Great videos and awesome content!

@KyleSVT

4 жыл бұрын

@@desiconcepts9095 Thanks brother!

What size is the original pulley, not sure if mine was changed.

@KyleSVT

5 жыл бұрын

3.65

@gsdfan8455

5 жыл бұрын

@@KyleSVT thanks dude

@KyleSVT

5 жыл бұрын

np!

How much have you spent on mods?

@KyleSVT

5 жыл бұрын

Around $8k worth of mods are on the car

What carbon fiber cold air intake is that?

@KyleSVT

5 жыл бұрын

JLT

can you send me a link to all the mods you did to the irs to stop the wheel hopping please

@KyleSVT

3 жыл бұрын

fulltiltboogieracing.com/1999-2004_Cobra_Suspension_Parts_and_Tools.htm

@burnessorr9485

3 жыл бұрын

@@KyleSVT do you recommend me getting the entire kit?

@KyleSVT

3 жыл бұрын

yes

KyleSVT does this car ride smoother than a 2000 mustang gt

@KyleSVT

4 жыл бұрын

yes it sure does

@theradchase3094

4 жыл бұрын

@@KyleSVT I know the steering on my 2000 mustang gt when you make a sharp turn it won't glide back in your hand

How hard to do cooling mode

@KyleSVT

Жыл бұрын

Not easy

Ever do the cooling mod?

@KyleSVT

5 жыл бұрын

Yea I may do it someday

@daltonhunter4049

5 жыл бұрын

Yea just an fyi ur back cylinders might get so hot it might burn ur valve seat. So yea i would deffinitly. I have a 04 mysticchrome cobra and that happend and it is mostly stock and that happend. U should deffinitly do it. It will save u alot of time and money

@KyleSVT

5 жыл бұрын

I never run the car hard enough for it to get that hot. Usually happens with wide open in 5th and 6th gears. The 04s have the revised heads as well so it's even more rare for that to happen

@johnandrus3901

5 жыл бұрын

@@daltonhunter4049 If you aren't going to race it, the mod really isn't necessary. I tuned 100,00 mile in mine this year and have never had a problem.

@NHWilderness

3 жыл бұрын

@@daltonhunter4049 happened to mine with only 28k and I don't beat on it take it out on weekends never been to the track..it happens and some never realize it..its not that expensive and so worth it

I have the chrome metal inserts but had the black sticker inserts first..... don't get the metal they'll look funny lol

@KyleSVT

4 жыл бұрын

Yea I prefer the black vinyl

there’s a coupe dsg cobra for 16,500 if anyone’s in the vegas area and wants a cobra

Could you post a mod list with links?

@KyleSVT

3 жыл бұрын

I got most of my mods from my buddy at fulltiltboogieracing.com/

Step 1 I got to get a Cobra

First mod for a stock high mileage cobra? 140k

@KyleSVT

5 жыл бұрын

Catback Exhaust

@big_rooster_racing

4 жыл бұрын

Plug change, fuel filter change, check intercooler pumps function, and oil separator before you begin adding any go fast mods.

Tire>wheel

What's your HP

@KyleSVT

5 жыл бұрын

445

@yannyfrag

5 жыл бұрын

@@KyleSVT I have kind of your same mods, mine have 2.8 pulley, long tubes and borla catback, accufab single blade throttle and plenum, 4:10 gears, jlt CAI ram air, afco dual pass heat exchanger, I guess I'm somewhere around you hp numbers or more?

@KyleSVT

5 жыл бұрын

yea I would think right around there or a bit more

@yannyfrag

5 жыл бұрын

@@KyleSVT nice would see. My next mod have to be the IRS bushings but it will cost me a lot because I don't know how to do it and don't have the tools to do it.

@KyleSVT

5 жыл бұрын

its worth it trust me!

Heat exchanger with fans

@KyleSVT

3 жыл бұрын

Good one as well. Need to do mine

Subframe connectors is 1st mod especially in a vert I cant belive ford let the verts leave the factory with the amount of power and the shitty chassis ! The bolt on factory subframe connectors are absolute shit ! Just had stifflers full length connectors installed huge difference now ! Great engine but shitty chassis im coming from an 08 vette z51 package so its a bit disappointing in the cobra next mod is front and rear strut braces .

@KyleSVT

Жыл бұрын

Yea verts need a lot of help lol connectors really helped my coupe as well