4:30 With an aftermarket header you will get a SES light. To get rid of it all you gotta do is get a spacer for your secondary O2 sensor. It'll clear right up. Thanks for the tips for us QR owners!

@christianflores3437

4 жыл бұрын

What are precats and what are headers?

@elpilotodeldesierto3113

4 жыл бұрын

I searched QR mods while watching this and was reading about that spacer

@cedricmiller4370

4 жыл бұрын

@@elpilotodeldesierto3113 do you think a qr2.5 with a 500 dollar chip or programmer will be able to outrun the v6 version altima?

@nickyounger173

3 жыл бұрын

@@christianflores3437 pre cats are pre catalyst material that always more airflow, headers replace your stock manifold witch makes it louder n usually give you quite A bit of hp , it’s usually located on the front side of your engine

@caydendiel3818

2 жыл бұрын

@@cedricmiller4370 the v6 of the same year is the same speed due to weight in the low end, but the v6 would win in the top end, if you are looking for a short race I would bet on the QR

Guy's out there with the p0420 code. Before the guy at your local shop tells you your converter is bad, an they have a $300 converter in stock. check the donut gasket and\or spring bolts thats between the converter and exhaust pipe. (The leak may only happen above 2k rpms so you may need someone to keep the rpms up when checking for the leak) Especially if you have\had bad motor mounts and the p0420 code popped up

Headers on the QR do give you a check engine light unless you do the oxygen sensor spacer near the resonator. Also from 2002-2006 Sentra also have a problem with the butterfly screws right under the intake manifold.

Great vid man. Keep it up

What I don’t get is the Altima and Spec V have the same engine but the Spec V recommends minimum 91 octane.

when people don't warm up their engine it makes me cringe 😢

@ProjectStarLIGHTS

8 жыл бұрын

You dont need to warm an engine more than 15 seconds, thats enough time to send oil through

@kalion81

7 жыл бұрын

DansBLACKFLAG that's what a mechanic will tell u so they can stay in business..

@HDeverythingSD

6 жыл бұрын

you don't have to warm it up more that 15-30 seconds depending on how cold it is. the vehicle will warm up faster if you drive it smooth. just don't revv too high until the vehicle is at optimal temp.

@medoutube1

6 жыл бұрын

Schmidt McGready please don’t say that to a person that knows anythin about cars

@XenomorphLV426

5 жыл бұрын

It's fine as long as you don't rev it out until it warms up.

The shift kit, valve body has to come out for the main parts of it. There are a couple extra seals you can upgrade but trans has to come out and apart. Ive got a transgo kit for my altima. It does involve drilling into the vb soooooo imma prob leave that to a shop to do.

the spec v shares the block but the crank and rods and pistons are different as in heavier duty

Question, the link on the forum for the stock wrx fuel pump does not work. What year wrx fuel pump is compatible for a 2005 altima 2.5s?

I have a 2009 Nissan Altima and I was wondering if the 2009 Nissan Sentra have the same ecu because I’m trying to tune my car

On my qr25 I have a hood exit with only one o2 sensor and I don't have any lights or issues

Good video !!!

I have an 08 2.5 SL with 276,000 miles completely stock. has the same CVT and motor from the factory. I have a DNA exhaust. sounds like a quiet fart can civic with more beef. makes really neat pops between the simulated gears in sports mode.

@DailyAyung

3 жыл бұрын

Damn 276,000 miles man your car still working with all those mods 😂

@nicholastoufos9178

3 жыл бұрын

I have one too I didn’t know it had sports mode wtf

@B711HD

2 жыл бұрын

I have a 05 with 294k and a 07 with 214k

@B711HD

2 жыл бұрын

@@DailyAyung there some with 400k and with mods

@B711HD

2 жыл бұрын

@@DailyAyung miles is just a number

What do the crank pulls do?

With all these mods how much horsepower will the car hve

Helpful video but changing the header does trigger a cel just so u know cause your taking away the cat but u can get rid of the light if u put a spacer on the first oxygen sensor I have an 03 Sentra spec v super fun to drive and now getting a 2010 2.5 Altima SL

@ninjar3kill235

6 жыл бұрын

Nick O'Neill do you think the 2.5 sl can handle a turbo (automatic transmission)

@xxtagerxx8165

5 жыл бұрын

Yeah I want to kno also

What is QR?

what kind of exhaust do you have in there?

Wish you made this when i had my Altima. Damn lol

How much HP will this add to your car modding the stuff you suggested up until the cam?

DNALI thank you for this video

I seen like 50 altimas in this video! must be popular in your area!!!

@CarringtonHollister

6 жыл бұрын

Brett Welliver Altimas are VERY popular in the city where I live.

@elpilotodeldesierto3113

4 жыл бұрын

Altimas are everywhere especially that generation the last Gen that didn't have the Weak CVT Transmission they are the fastest economy car of that era

@dvid3866

4 жыл бұрын

HahHH bruh

@zackerylamb1045

3 жыл бұрын

I see the same make of my car everywhere I go- once I saw 3 of the same 05 Altima’s on my road home. One was completely totalled lmao

ITS YO BOY DON SQUALIE! KA KAAAAAA KA KAAAA! RUN

I have an '05 Altima 2.5S. I want to install a CAI and later an exhaust. My car currently has around 185,000 miles. How long will these engines/transmissions last? I wouldn't want to add stuff only for the car to die out soon after.

@KyLesCaster

5 жыл бұрын

if you plan on keeping the 2.5 for a long ass time, go catless to avoid high mileage clogging later in the future (200,000miles) and replace the stock exhaust manifold with the cat inside for a catless header

I have a 3.5 6 speed manual I wana get rid of

Hey how what you?! I got one question Sr.

I could be wrong man but I'm positive it's the same mutha fucker disliking our videos. It's that guy who had the bullydog system for sale.

@DNALI

8 жыл бұрын

Lol I wish I could find his channel

@Xx1SailorScoutxX

8 жыл бұрын

IMO, Bully Dog products are best made for American trucks (i.e. Dodge Ram).

@MrJasonlyrics

8 жыл бұрын

DNALI I reported a comment then his channel disappeared so my guess is they removed him from you and he created a ghost account or multiple just to hate. Lol.

for the header 2.5 Altima engine is one spacer good or do you need to put two? also just in downstream or on both ?

@perrynunes8732

3 жыл бұрын

I have a right angle spacer on my downstream sensor. No codes showing up. It's been 3 months now

@lmmedia3811

3 жыл бұрын

@@perrynunes8732 any codes?

Speaking of the automatic transmission. Anyone with a 06 Altima qr25 have a hard 2nd gear shift. My trans mounts are ok but the motor mounts are worn but there about to rip because of the hard shifts

@DJBpartyTV

3 жыл бұрын

I have a second gear hard shift on my 06 Altima 2.5 SL. But I noticed it it doesn't hard shift after the engine warms up 🤷🏾‍♂️

@TheKellandMei

2 жыл бұрын

yes me 06 Altima 2.5 SL , but its not too bad where it jerks hard.

@FinnLovesFP

4 ай бұрын

@@TheKellandMei I'm really late on the comment. But I also have an 05 Altima 2.5S, and it was shifting hard on 2nd gear for the longest, and turned out to be the fuel pump. Was getting some food on the way home, and car died out in the drive through, rip. and it was the pump, after replacing that, it stopped shifting hard. At least that's how it was for me.

Why not a cheap eBay kit or an electric turbo for For $1200 like on Cletus where is that at

Do you know of any cvt performance upgrades for 2011 Altima 3.5sr

@j32kyle18

4 жыл бұрын

shootinblanks007 manual swap lol

Hi Denali,why my Altima 2002 qr25 don’t pass the 113mph? Is really bad,I need change ecu???

@korbynhurley5247

6 жыл бұрын

yahaira martinez that's weird ive maxed mine out 5sp manual I have a rebuilt head coming in id really get a felpro headgasket with arp head studs if your going to be pushing the motor that hard

Hey guys first time Altima buyer here just got the 2014 2.5 S and I'm looking to do my first mod any suggestions on where I should start first??? Really appreciate it

@nicksanchez8494

3 жыл бұрын

No

@blargus6535

2 жыл бұрын

@@nicksanchez8494 fucking savage

I have a 2012 altima 2.5 SL . Can I still use these mods?

@jasondeftones1

3 жыл бұрын

Hey. Did you end up doing any mods to your 2012 2.5?? Just recently got a 2012 2.5 Altima coupe. 55k miles. Looking to get a bit more power where I can without spending too much (if I’m going to be spending a lot it would just be more cost effective to get and replace with the 3.5

My Altima is straight piped from the headers back to the muffler, after I did both of those my 02 sensors started tripping hard, I even unplugged my battery to reset the check engine light n it only last for about an hour, so I’m gonna have to bypass my 02 sensors so that engine light dosnt annoy tf outta me

@Marco-gq5pk

2 жыл бұрын

What yr Altima you have??, I have a ‘19 and tryna put headers on

@motiv8d111

Жыл бұрын

Add O2 snecer spacers. Worked for me

Would this work on a 2012 Altima 2.5

Recommend any particular performance chips for a 2.5?

@xorpontiktok8024

2 жыл бұрын

thouron

would the spec v motor be the same as the 2010 2.5l altima

@DNALI

6 ай бұрын

In not sure about a 2010 but I know the 02-06 Altima is the same motor

Hey man I have a Nissan 2002 3.5 any where I can get those seats or look alike with the controls still working I know that one was a special edition but my tan seats are growing age please help? Thanks dude

@DNALI

8 жыл бұрын

+chris Williams i had to get mine from an SER part out

@gavinmcclure8047

3 жыл бұрын

My ex girlfriend has a blacked out se-r she is trying to sell me. I have a 05 spec v reason I'm watching this video lol

I have a 2008 Altima 2.5 s what mods can I do for it?

@peytonhale1022

3 жыл бұрын

Same

@cameronalford4506

3 жыл бұрын

@@peytonhale1022 I can do the same mods to it?

I own a 2016 altima sr are parts interchangeable

Bruh solid motor mounts will typically make your whole car vibrate at high rpms or at idle typically. Not really daily friendly.

What exhaust size will you recommend for the 2.5L to give it that badass sound 2.5 inch pipping or 3" inch piping ?

@JesusSaves86AB

4 жыл бұрын

3" is too big for just about anything that isn't boosted. If your car is only bolt-on's/tune then never go more than 1/2" over stock size or you'll lose backpressure (and therefore power).

@jayon101

4 жыл бұрын

@@JesusSaves86AB thanks for that badass info you helped me out a lot with that knowledge I really appreciate the advice a lot thanks again.

@JesusSaves86AB

4 жыл бұрын

@@jayon101 Happy to help

Oh man I know it is an old 🎥 but that applies to my see spec v Sentra qr25de stick shift 2006 👏👍👍👍👍

Can you do a video 2006 Nissan Maxima mods how to make more hp

@grantbelhumeur7266

5 жыл бұрын

ssim and leave it in auto and drop the pedal at desired shift point between 4500 and red line it will shift and as it shifts go back into the pedal it shifts quicker than in slap stick

What's up bro I got a 2.5 Nissan Altima 05 I'm looking to mod it but idk what to do 1st any ideas man ?

@coreydukes5725

7 жыл бұрын

LostStripes hey man I own an 02 2.5 auto altima but so far I've done aftermarket headers which I pulled off an altima at Pick your part. But mostly it's got no cats and I have a muffler delete alongside a weapon r short ram cai. Which has an extension to get more air. That's all the performance stuff I've done and having headers with no catalytic converters and no muffler basically gives you a decently sounding altima

@coreydukes5725

7 жыл бұрын

Stock altima 2.5 pushes 175 hp from 02-06 so my friends think atm I may be pushing close to 200 but I may be buying a turbo kit eventually not sure tho

@RahBenjiii

4 жыл бұрын

Corey Dukes wassup bro u got any pictures and videos of your Altima 05 I’m looking to mod mines also

@adonis7339

4 жыл бұрын

Corey Dukes I know this is a old comment but how'd you do the muffler delete did you go somewhere to do it or at home?

i remmoved the cat on my 04 Ser sentra and have a check engine

@Brian-ye4dg

4 жыл бұрын

Did you fix it how

late but my mods for a 2015 Sv 2.5l , nothing too much just want a quicker 0-60 , can I get my parts and bring it to a shop to save money?

@korbynhurley5247

6 жыл бұрын

Paul Goslin learn to do it yourself it's so easy

@TeRraAwTisM

6 жыл бұрын

Korbyn Hurley I dont have time for that I got money to make and places to be , clearly quicker than I want to be

@korbynhurley5247

6 жыл бұрын

Well if you have any questions I'll send you my email you'll save alot of money and many mods can be done in 2 hours I'm building my qr25de 2003 to be 500hp

@Luis_slides

5 жыл бұрын

@@korbynhurley5247 bro i got questions

@korbynhurley5247

5 жыл бұрын

KazonFilms what you wanna know

I have a 3.5l sr and was wondering how much hp you would gain with a chip?

@PSUNATION

Жыл бұрын

I like how 5 years went by and he still never answered you. Pol😅

@mattryan5393

Жыл бұрын

@@PSUNATION Yeah, my 3.5 CVT is long gone. The tranny went. I drive a 2019 GTI now.

Do you got a Twitter?

Will this work on 2014 2.5 altima?

@DNALI

8 жыл бұрын

Yea most should

@genagenadich5378

8 жыл бұрын

DNALI​ Thanks. Do you have any idea on how much hp I can get? I have a 7.4 0-60 right now. What would you think my 0-60 be after the mods? Intake, exhaust, etc..

@trvnd1

6 жыл бұрын

7.35 0-60, but it'll sound better lol.

I have a 2011 2.5l altima should I go supercharger or turbo not looking for much hp gain just 15 or more hp and I wanna make it a sleeper so no loud exhaust any suggestions

@juancalzada2703

6 жыл бұрын

Coty Kinsey ill sugest to replace your mechanical fan with an electric fan.....

@josephgutierrez3359

5 жыл бұрын

I have a 2012 2.5 Altima and want to play with it but I dont know what would be the best thing to do for performance. Any ideas?

What engine is the 2017 Nissan Altima 2.5 SR?

@wateable

5 жыл бұрын

4 cylinder

@camarosaregay7943

3 жыл бұрын

Inline 4

Yo DNALI! I'm in the GTA and I got a 09 alti 2.5, any decent shops for parts or labour you use in the area?

@DNALI

8 жыл бұрын

+Chris Durrant I have a plaxe I go to for cheap parts but my mechanic is a bit pricey. But he does a good job.

@chrisdurrant2940

8 жыл бұрын

+DNALI where do you pick up parts? nw on the mechanic can do most work myself, just get lazy somedays you know? lol

@DNALI

8 жыл бұрын

Chris Durrant I hear that haha. I het most of my parts grom Cawthra automotive

Guy i see a bit of oil in the bay what’s the culprit?

@DNALI

4 жыл бұрын

Depends where its comming from but from experience valve cover gaskets are usually pretty common to leak on these

@christianflores3437

4 жыл бұрын

DNALI the head gasket or other gasket?

@DNALI

4 жыл бұрын

@@christianflores3437 no the valve cover gasket would be between the plastic cover that the coil packs bolt into and the engine

When I did my ground kit I got an extra 500 horsepower my gas mileage went up to 85 miles to1 gallon unbelievable that would be my 1st model lol

@toniramirez354

4 жыл бұрын

Whats a ground kit?

@dorianpannell9046

3 жыл бұрын

that engine doesent have 500 hp in it

@goodfellasinc.5648

3 жыл бұрын

@@dorianpannell9046 no duh lol smh..

What's our new regulations for cats in Ontario now with the new emission laws

@DNALI

5 жыл бұрын

Storm Morrell well I know the emission tests will be gone but not sure if they will be doing a visual inspection of some sort. Time will tell

How can I tell what motor I have this is my 1st Altima

@michaeldieschbourg7892

3 жыл бұрын

There’s a badge on the back either 2.5 or 3.5 the 3.5 is the v6

Why wont my 06 2.5l l4 nissan altima pass 113mph. I've had it up to 130 but now won't go pass 113

@AK-cx5ix

3 жыл бұрын

I got 09 2.5 and I won't go past 130 I was shocked I thought I would go to the limit maybe slow but still go but it wouldn't budge at all i was disappointed but I still have it n drivr it i like it its not a bad car but I want a 3.5 SR

Its ya boi donsquale!! 😩

honestly just wana destroy the cvt lmao

Its not Headers on a four cylinder. A four cylinder has one header. one header for each bank of an engine. It would be impossible to install headers on a QR because the head only has room for one.

bro your racing your altima arent you scared to blow a cylinder head or mess up your timing chain cause that is very common with nissan 3.5s

@DNALI

8 жыл бұрын

Yes and no. I bought the car to have fun with and Ive been doing exactly that since I got it. I dont know what I will do If and when the timing goes. Will cross that bridge when we get there lol

@runempockets

8 жыл бұрын

Lol i had a maxima my timing chain broke after the second time of me racing it i now have an altima 2002 3.5 straight pipe and intake on it and my solenoid just recently went out idk what is it with nissan that the check engine light always has to come on

@DNALI

8 жыл бұрын

david sosa Ive been super lucky with this car so far. I want a maxima next year. Mite pick up a beater and retire the altima from racing haha

@PelicanGreed

6 жыл бұрын

I put my Altima through fucking hell I've never had any issues. Sometimes the cvt wines when it get hot. I'm at 110k now knock on wood

@solidcobalt

5 жыл бұрын

The vq35 is a widely popular motor for modification without many reliability issues, they're really only known for some oil cooling and consumption issues, never heard of someone blowing a vq from "racing" without having a ton of power going to it without supporting mods...

Was that me or you take a right and said a left

I'm new to car mods but I'm bored of my Nissan altima 2013 sadan 2.5 sv someone please get back at me about mods .I would appreciate it

@brendanseager9194

5 жыл бұрын

Yea get rid of it before tranny blows Nissan has worst cvt

@infiniteblaz3416

4 жыл бұрын

Brendan Seager Despite many of them still running on the road without problems? Lol.

@YeetxBoi

3 жыл бұрын

@@infiniteblaz3416 most of them were either manual or your typical automatic transmission, not the cvt. The cvt was known to fail, don't be ignorant.

@infiniteblaz3416

3 жыл бұрын

@@YeetxBoi Where have you been in the last 14 years? The Altimas have been using CVTs since 2007. It was that or you had the option to get it with a 6 speed manual transmission. The only ignorant person here is you.

2 gen qr parts, headers, cai or trubo.

@ezragrace6348

6 жыл бұрын

David m def trubo

What is a QR or a VQ?

@DNALI

4 жыл бұрын

QR is the engine code for the 2.5 4cylinder motor and the VQ is the code for the 3.5 V6 motor

@cedricmiller4370

4 жыл бұрын

@@DNALI be honest in your opinion do you think the Altima 2.5qr with a 500 or 600 dollar tuner chip or programmer will be able to dust the v6 version Altima?

@DNALI

4 жыл бұрын

@@cedricmiller4370 best bet would be to get headers and an intake and then a legit dyno tune. I have heard modded 2.5s can get pretty close to a stock 3.5

@anik.debnath

2 жыл бұрын

@@DNALI Which headers do you recommend for the 2.5? Been looking at the magnaflow header w highflow cat converter but it’s pretty pricey. I’ve already got a CAI installed what other options do you suggest or what else could I do to further mod my car?

Anyone tryna turbo their 2.5s ‘09 or after hmu.

@yahhbishh3.047

5 жыл бұрын

TheRealWarface me

@loflipz5542

5 жыл бұрын

tavion garland if you’ve got instagram hmu @real_war_face I need tips.

@akabuck3812

4 жыл бұрын

I'm looking into doing it.. Can I hit you up online anywhere?

@abepetersfiwajoluwa382

Жыл бұрын

Hey man tryna turbo mine

How about 2.5 altima 2008...bud

@bmwe90zxz5

4 жыл бұрын

Check my channel. I have a few videos with my 09 Altima exaust mods

Aahhhmmmm aahhhmmmmmm aahhmmmmmmm

Ayyyy pc but liberals

Ehh that conservative sign

DNALI a.k.a. Don Squally = CAF(Cool As F**k). Subscribed just for shits & giggles! Lol Iwas just looking for some mods for my wife's 2.5, but this dude is legit. Cool vid. Def worth the time watching. No BS.

@DNALI

5 жыл бұрын

Zack Thomas appreciate the support brother. Lots of new videos conning soon man

😄😄😄😄😄

the simple fact that you didn't warm that engine up makes me not want to watch this vid lol

best mods for the 2.5= trade it in for a v6 lmaoo

@Andressantiagooo99

6 жыл бұрын

haha

@jordansg1425

5 жыл бұрын

2.5 is cheaper

@angelmontoya7526

5 жыл бұрын

stoner aquatics I like double that

Best mods for a 2.5....Don't be dumb enough to buy one 😑😂. shits slowww

@Gmeister515

8 жыл бұрын

mines a 5 speed and far from slow, with multiple bolt ons and soon to be boosted. What do you drive, Hater?

@iiNeVeRCluTcH

7 жыл бұрын

lol somebodys triggered they're in 4 cylinder

@CoobCanGame

7 жыл бұрын

Cody why you even here lol

@justbeingawhiteguydoesntme2038

7 жыл бұрын

Zach Jones you probably don't have a car at all, that makes me 😂😂😂 you are just one of those Bitch ass fool that think you are funny. Get a life and do something with it. 🖕🏻👋🏼💥😵💯😂😂😂😂😂😂😂😂😂

@altimuh9585

6 жыл бұрын

but the spec v pulls on a 350z sooooo

ninjalifestyle

😄😄😄😄😄